Having Trouble with sound when hooked up to my Car stereo

I have hooked up my iPod to my car stereo and it sounds horrible. I dont know if the guy that did it, did it wrong but all support is telling me is that to hook it up with the cords i have. Any help from people? thank you

Does your ipod play through your car speakers.
Im guessing it does.
I am rather confident that your problem is solely thanks to the volume not being correctly done. To make it louder, use the car not the ipod.
Keep the ipod on a low volume.
Good Luck!

Similar Messages

  • Having trouble with sound when streaming videos on Netflix and Hulu

    When I watch videos on Hulu or Netflix my audio is very bad (as well as my video). It stops and starts and has a horrible robotic background sound, like a speaker is blown (though I know that's not the case because the sound is the same through my TV when connected via HDMI cord). My audio and video files are all up to date... What can I do??

     HI @MKC2287
    Thank you for your response.
    To try and rule out hardware as the issue here is a link to Testing for Hardware Failures (Windows 7)
    Have you checked for viruses and malware? Malicious Software Removal Tool
    You can try this step to try and find and repair corrupt files.
    Go to the command prompt and right click and run as administrator
    Type sfc /scannow and press enter.
    You mentioned that it is generating a lot of heat so here is a link to Reducing heat inside the PC to prevent overheating
    If the issue remains, you can try installing the original driver using the recovery manager
    Using Recovery Manager to Restore Software and Drivers (Windows 7)
    The next suggestion would be to do a full recovery back to factory.
    Performing an HP system recovery (Windows 7)
    During the recovery there is an option to  backup  your personal files to prevent data loss. If you have not done one recently I suggest you do one now.
    Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
    Once this step has been completed, please run the HP support assistant to obtain any HP updates.
    As you stated you are out of warrant and will not be contacting HP support for assistance you may wish to consider this option.   Smartfriend Your 24/7 solution for technology problems  
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Having trouble with sound on my iphone 3gs ringtones work but ipod doesnt any ideas?

    having trouble with sound on my iphone 3gs ringtones work but ipod doesnt any ideas? have tried resetting cleaning earphone dock and still not working

    Same here, I get no sound from videos, text messages. This happens for a while, then it works again then it doesn't work. When I go to settings, my "change with buttons" is on but buttons don't work. I have restored it but there is no change. Here is a picture of my screen when i try to change volume.

  • I am having trouble with sound on my iPad

    I am having trouble with sound on my iPad

    Found the fix.
    If the reboot doesn't fix it.
    If the headphoens work find, but no external speakers.
    If the double-click and page right to the software mute, doesn't show the sound knob - just the brightness
    If your pop-up shows "Docking Station"
    Then, the problem is very likely a dirty connector.  The iPad/iPhone/iPod connector uses a resistor value to determine if the device is connected to an external 'speaker'.  There are a range of resistances, for a range of products.  This is known as the Connector Pin 21 issue.
    Take some windex on a que-tip, or perhaps a Windex paper scrub and rub it on the bottom connector port.  Somehow, "something" has gotten on those contacts, and it is pulling the voltage on pin #21 down - so that the iPad "thinks" it's connected to an external speaker - this will disable the internal speaker circuitry, as well as the internal speaker volume controls.
    Do not over-saturate and short out your iPad.  Do not throw it in the sink, do not use the kitchen faucet to flush it out.  A Que-tip with a few drops of Windex (or other gentle cleaner) should work just fine.  Takes all of 30 seconds - and magically, the volume knob appeared and everything worked just fine.

  • Having trouble with sound quality

    I have had this iPod Touch 2nd Generation for almost 2 years now, and I'm starting to have some troubles with it. The headphone sound quality is now starting to deteriorate. Unless the headphones are plugged in a specific way, either one bud goes out, or the sound quality goes down, as there is a lot of static and crackling, and I've had experiences with it actually shocking my ears while I'm listening.
    I have tried a new pair of headphones, and this does nothing.
    My iPod is obviously beyond the manufacturer's warranty, and it's up-to-date with the latest update. Is there anything I can do?

    Sounds like your headphone jack may need replacing.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • I am having trouble with Powerpoint, when I select slideshow mode the program shuts down

    Can someone help me? I am having troube with Powerpoint. When I select the slideshow mode the program shuts down.

    Assuming you are using Office for Mac, you may want to ask your Office for Mac in the Office for Mac forums: http://answers.microsoft.com/en-us/mac?auth=1.

  • Having trouble with sound while watching video clips using Internet Explorer?

    sound & video pausing
    while watching video clips using Internet Explorer

    I answered your other thread.  Locking this duplicate one.

  • Having trouble with sound

    My sound isn't working how do I fix it

    Try the volume rocker on the side of the iPad. Are you sure that you just don't have the volume turned all the way off?
    The sound/speaker icon that Alan is describing is for systems sounds - sounds from apps, games, keyboard clicks, email notifications.
    This describes how system sounds can be muted.
    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • TS2771 my ipod touch when hooked up thru my car stereo fm transmitter sound only comes out on certain speakers

    I went to my lexus dealership and they tested my car, replaced and bought 3 different type of fm transmitters. But when I plug up my iphone 4 & my 5 it plays perfect through my car speakers. Could help me with some troubleshooting steps to elevate the issue? Oh, and I have restore to the device to the factory settings w/ the same outcome.

    Go in to the iTouch menu settings and turn off the speaker , and it will work
    samething happend  when i work in a customer vehicle we install the auxiliary input because the vehicle didn't have one, and after it was done i test the aux port with my nano and it works just fine,
    customer try his itouch and it didn't work  we try his mp3 in our display room radios and it didn't work
    until we found the problem in the settings
    good luck

  • Having trouble with your iphone6 not connecting to your car? here is what worked for me

    Back up your phone!!!
    Go to Settings>General at the bottom of the screen hit “Reset.” On next screen select "Reset All Settings." This will reset your locked screen, your internet passwords, Touch ID & Passcode, your zoomed view, battery percentage, etc. You won’t  loose any apps or docs. Just go back and change them as you did when you first got the phone. Delete all the Bluetooth devices on both in your Car and on the iPhone (on the phone: go to Bluetooth>My Devices, click on the “i” at the right and click on "Forget This Device"). Shut down both the phone and the car. Restart the car and the phone. “Pair" your phone. Shut the car off and restart. Give it a few minutes to allow the car to update the phonebook.
    This worked like a gem.

    Agreed!!
    Same story......after waiting over 36 hours for activation, finally called 877-800-3701 AGAIN (probably the 4th or 5th time) and got an incredible CS person named Michelle who could not have been more helpful. She actually took the time to look at my account, saw that it was ready to activate, and went through all the steps to manually activate it. Whole process took about 45 minutes, but it was with someone from AT & T instead of waiting around all day for some magical email. Now, iPhone works like a charm and was worth the wait.
    So to all still waiting for activation, keep calling the 3701 number. And keep doing it until someone takes the time to help you. It really does work......

  • I am having trouble getting sound on video clips I have imported into Premiere Elements 10.

    I am having trouble getting sound when importing video clips into Premiere Elements 10.  Is someone able to offer me a solution as I have no idea what I have done to cause this to happen. 
    The clip has sound when opened with windows media player.
    Thank you

    Hi Steve,
    After reading everybody’s responses I am feeling a little out of my depth.  Being new to this I am having difficulty in understanding a lot of the information given to me and also in the information you require from me.  It appears that one thing I should never do is mix film from two different cameras.  I would really like to fix this one particular clip though as it holds an interview that was taken when leaving Coober Pedy and something that I don’t want to lose.
    I have today done some research on the camera that took the offending video clip.   It was a Samsung S85 and according to the Samsung website it uses MJPEG video format.
    Here are the specifications as per the Samsung website.
    Camera Type
    Ultra-Compact Point-and-shoot Digital Camera
    Image Quality
    Image Sensor
    1/2.5" 8.3 Megapixel CCD
    Effective Resolution
    8.2 million pixels
    Color Depth
    24-Bit RGB
    Color Modes
    Normal, B/W, Sepia, Negative, Red, Green, Blue, Custom Color
    Image File Formats
    JPEG (Super Fine, Fine, Normal)
    Recorded Resolution
    8M (3264 x 2448)
    7M (3264 x 2176) - 3:2
    6M (3264 x 1824) - Wide
    5M (2592 x 1944)
    3M (2048 x 1536)
    1M (1024 x 768)
    Video Recording
    AVI Motion JPEG with Audio
    640 x 480 @ 30 or 15 fps
    320 x 240 @ 30 or 15 fps
    Clip length limited only by available memory
    5x optical zoom available during video record
    Audio Recording
    WAV format (monaural)
    I downloaded and installed Media Info and Morgan Multimedia MJPEG Codec V3.99.108 today.  Do I have to register it to get it to operate?  I read the documentation file that came with it hoping to find a clue as what I should do but I could not comprehend the information it contained.
    Thank you and other members who have responded to my plea for all the help you have given me.
    Judy

  • I have 64-bit Vista on an HP laptop, and am having trouble with P4

    I have 64-bit Vista on an HP laptop, and am having trouble with P4. When I go to the "Compatibility" tab in for the P4 .exe file, 32-bit Vista does not show up as a compatibility option. The latest version shown is XP with SP2. Am I missing something? Is there a patch or download that updates P4?(The problem I'm having is stuttering and stopping in the imported avi2 files I have downloaded from my Panasonic digital camcorder and converted from avi to avi2 using DVDate. Also, I get stuttering with digital photos - jpg files - that I want to insert in the movie with added narration.)

    A.T. Romano
    It gets a little complicated. This is a simplification, but I hope this
    helps to visualize what's happening.
    The 32 bit and 64 bit environments are separated from each other.
    There are separate program files directories, separate shared dll library
    directories, and even separate registry entries. You can't mix 32 and
    64 bit modules, and some applications, like Internet Explorer, install
    both a 32 bit and a 64 bit version on the same computer. (IE does that
    so it can process web pages that use 32 bit executable controls).
    Vista 64 has 32 bit emulation built-in using a subsystem called Windows
    on Windows 64 or WOW64 for short. WOW64 intercepts 32 bit
    application calls to the operating system and handles the 32 to 64 bit
    conversions and the redirection of the file and registry locations.
    The program files themselves contain flags that indicate whether they
    are 32 bit and whether the file uses the 64 bit version of the file
    structure.
    If the program is marked 32 bit, it will run in 32 bit using WOW64.
    Programs are generally installed by an installer program which places
    the application files in the proper locations and writes the registry
    entries and any other setup tasks that are needed. To install a 64
    bit program, a 64 bit installer is needed. For 32 bit installers, the files
    and registry entries are redirected to the 32 bit locations.

  • Q Having trouble with shortcuts in illustrator( Please Help)

    I am having trouble with shortcuts when i exit the program and then try  and use shortcuts it wont work till i go back into edit  and shortcuts menu and click ok to the defaullt setting and i have to keep doing this???? Can  some one please helpme. I am very new to illustrator and i am trying to learn the shortcuts. Also im not very good with technical stuff so  please make answer simple if possible Thanks

    If you are saying that you use the default keyboard shortcuts list, and every time you open Illustrator you can't use any keyboard shortcuts, this must be a bug.
    I'd suggest changing one keyboard shortcut, or as many as you would like, and save it as a new list. Maybe it won't be bugged like the default list.
    If that doesn't work, my only other idea would be re-installing Illustrator. But wait to see what others say here, before trying to re-install.
    Good luck!

  • I'm having trouble with installing a 8g kit in my late 2009 mac mini. when the parts are installed all i get is a beeping sound, is there any way to get around this?

    i'm having trouble with installing a 8g kit in my late 2009 mac mini. when the parts are installed all i get is a beeping sound, is there any way to get around this?

    What is the source & link to this 8 GB kit please?
    Can you count the beeps or flashes?
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
    5 beeps = processor is not usable
    In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
    Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
    http://support.apple.com/kb/HT1547

  • Im having trouble with my volume. The only time i can hear my iphone's sound, is when i have heaphones plugged in. How do i fix this

    Im having trouble with my volume. The only time i can hear my iphone's sound, is when i have heaphones plugged in. How do i fix this

    Hello Malique2k14,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    No sound or distorted sound from speaker
    Receiver issues
    Best of luck,
    Mario

Maybe you are looking for