Having trouble with Touch Up Text Tool - Please help!

I am trying to edit inside the PDF document and have done so i
n the past with other projects. I keep getting this error message pop up when I try and typ
e.
http://i42.photobucket.com/albums/e333/Smurf209/AdobeErro.jpg
What can I do that would allow me to edit inside this doc?

Thanks! I installed the font and I can edit in the document!
I thought about doing this, but it seemed too simple. LOL
For those that this isn't working for...I used this guide to install the font:
Windows XP
Double-click on “My      Computer.”
Under “Other Places,” click      on “Control Panel.”
If you are using the Classic      View, click on “Fonts.”
(If you are using the Category view, click on “Appearance and Themes.” Under      “See Also” on the left-hand side of the screen, click on “Fonts.”)
In the Fonts window, select      the File menu, and choose “Install New Font.”
Navigate to the folder that      contains the fonts you want to install.
OpenType fonts purchased online from Adobe will be in the location you      decompressed them to.
Select the fonts you want to      install. You can click to select one font, Control-click to select several      fonts, or Shift-click to select a contiguous group of fonts.
Press the “OK” button to      install the fonts.
Close the Fonts control      panel when you are finished.
The fonts are now installed and will appear in the font menus of your      applications.

Similar Messages

  • Having trouble with DVD Video files. Please Help! :)

    Hi I recently got a film DVD I wanted to take a clip off. However although I can watch the section I want in Windows Media Player, when I import the film into Premiere - some of it is missing! there are 4 files '4-1',4-2','4-3',4-4' which make up the movie. I can load them all in but 4-3 is missing the last 15-20 minutes, even though I know its there - cos this file is the same size as the previous one which is full length. Does anyone know why this would be? The DVD is unencrypted.
    Please help - its quite annoying that the small section of film I want is the bit that won't appear! Thank you very much
    Rich

    Based on this one line:
    The DVD is unencrypted.
    I was assuming that it was not protected. However, as you point out, some aspects might be, and the OP might not be completely aware of this.
    If there is protection, I strongly urge anyone to respect that, regardless of their intended use of the material. Copy protection is there for a very good reason. Regardless of what one might be able to do, they should be 100% ethical, and honor any/all copy protection. This is true for material from a videographer, or from a commercial studio. Should you need to use the material in such a DVD-Video, you should contact the author to get first permission, and then the original source material, that has not undergone the MPEG-2 compression to DVD-Video.
    Again, I assume that the OP knows that this is NOT an issue, and will not figure into the problem. In that case, all above does NOT apply in this case, but some other reader might make note of it.
    Good luck,
    Hunt

  • Having trouble with Kingston 4gb RAM. Please help!

    So I ordered Kingston 4GB PC2-5300 667/533 MHz Dual Kit for my Macbook and I'm having so much trouble installing it. I can't get BOTH 2GB sticks to work at the same time, it will ONLY let me use ONE 2GB stick at a time in either slot. It works when I have BOTH ORIGINAL memory sticks. If I try ONE new Kingston RAM + 1 OLD 512 mb RAM, it doesn't work either. I've tried almost every combination, and the only thing that works is:
    2 slots with 2 sticks of OLD original RAM 512 MB
    OR
    1 slot with 1 stick of NEW 2GB kingston RAM (either slot, but only one stick)
    Has anyone had this problem?! I have no idea what to do...
    Thanks!!!

    OH so it can only take 2 GB RAM in the first place.. oh DARN! Thanks for clarifying though!!
    Also here is my hardware info:
    Model Name: MacBook
    Model Identifier: MacBook1,1
    Processor Name: Intel Core Duo
    Processor Speed: 2 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per processor): 2 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MB11.0061.B03
    SMC Version: 1.4f12

  • Having trouble with photomerge - as a beginner.please help!

    Howdy folks....
    Just new to photoshop. lots to learn!
    Um......I want to merge roughly 8 photo's using photomerge but when I try it comes up with the error message 'images could not be automatically aligned' & only 3 images (all overlayed) come out in the final result.
    Can anyone give me some ideas? I want to make a poster for my fathers birthday...
    Cheers & thanks for any help
    Ro :-)

    Check this article:
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-75e8a.h tml

  • Having trouble with touch screen. Freezes, texting adds more letters, screen locks up. Got new phone, synced new phone and now it does the same thing??

    Having trouble with touch screen. Freezes, texting adds more letters, screen locks up. Got new phone, synced new phone and now it does the same thing??

    I also tried the Hard Restart and still has the problem?

  • I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

    I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

    You can send it in to them: https://expresslane.apple.com/GetproductgroupList.action?PRKEYS=PF3

  • I'm having trouble opening my premiere pro cs6, please help

    I'm having trouble opening my premiere pro cs6, please help.

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

  • Updated Z10 to new software release 10.2.0.429 and having trouble with sending BBM/text messages

    I recently updated my Blackberry Z10 to the new software release 10.2.0.429 and I'm having trouble sending messages on BBM b/c the red X shows up on every single message that I send to any contact on my list. This was never a problem for me prior to updating it. I also suddenly cannot open my browser nor can I open my texts properly nor send or receive texts. The keyboard on the touchscreen shows up constantly while im trying to navigate through the phone and it stays frozen until I lock/unlock the phone. All of this ONLY started happening ever since I updated it. What's going on? Please help, this shouldn't be happening!!

    Hi and Welcome to the Community! 
    Keep the phone on, and remove the battery for about a minute or more and then replace it
    VIA | rat-7 
    http://supportforums.blackberry.com/t5/BlackBerry-​Z10/z10-update-10-2-0-424-problem-with-text-messag​...
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • I am having problems with my Pantech Caper. Please Help!

    I just transferred my phone number over to a used Pantech Caper that I bought a few years ago. When I used the Caper previously I had no problem with it. And the phone i had before i transferred numbers worked just fine i was just having problems with some buttons not working. Now that i have transferred the number over to the Caper i can receive texts and picture messages but can not download the messages. I can not receive calls nor can i send texts out. after i try to send a text I receive a message saying I have insufficient fund to send message. oh extra info... i have the plan for 500 minutes and unlimited text picture messages and unlimited web. Please Help... I need my phone for work.

        Hi YukiCross,
    I am  confident your issue has been resolved since your original post! If not,let's get this figured out. Based on your description it sounds like you have Pre-Paid service with us. For Pre-Paid assistance please reach out to:888-294-6804 . I can gladly address and resolve any Post-Pay related concerns.
    Thanks for your contribution to our community forums,
    AyaniB_VZW
    Follow us on Twitter @VZWSupport

  • I have a brand computer and I have an ipod nano generation 7. How do you download your music from itunes to your ipod. I did it on the old computer but am having problems with the new computer. Please help. Thanks

    Please help. I have a new computer and an ipod nano 7th generation. I am having problems getting my music from Itunes library to my ipod. How do you do it?

    Hello Sandy
    You can transfer the purchases from your iPhone to your new computer by following the steps in following article.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/ht1848
    If you have music that was not purchased from the iTunes Store, then you will not be able to move it from the iPhone to your computer. Instead you will need to follow the steps in this article that helps with moving the library from the old to the new.
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/ht4527
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Having trouble updating to 5.1.1 please help!

    I am having trouble updating to 5.1.1 on my iphone 4S. I have not jailbroken my phone at any point. but i get the "your phone is not eligible for the requested build" error message. very confused please help

    where would i find that on my mac?
    [typed IPSW into finder and nothing showed up]

  • Troubles with my ichat? someone please help me

    I have gotten my Mac about 3 days ago, and when i started it up i set up my account and everything. I've been trying to get on Ichat but it won't let me and it is really starting to frustrate me so someone please help me.
    its saying I'm logged in, but when i click "available" it is telling me to put a password in when i do it is telling me i am incorrect.
    i have already tried to go to the keylock access and nothing is there. i would really like to be able to use ichat before i just so happen to return it. if someone could please help me that would be just awesome.. the sooner the better, thank you !

    What account do you have .mac, AIM, gtalk.....

  • Having trouble with a audio file. Need help please!

    Hello. 
    This may sound funny and not to related to any of this at first, but if anyone here knows about the game portal, then they know about the ARG that went on during last week and may even still be continuing. None of thats really important but if anyone cares to know, basically VALVe released a new update with 30 new sounds, 26 of them moarse code/sstv pictures. 3 of them called dinosaur_fizzle 1 2 and 3. Infact, each one was named dino_1 dino_2 and so on. 
    The main sound that no ones been able to crack is called Dinosaur_noise. Its obvious there are voices in it and its some sort of major clue, this file is way out of league with the other ones. No ones solved it 100% or cleaned it enough to make basically anything audible.
    Now this started March 1st. Since then i have worked hours on the audio file. I have gotten close, but not close enough.
    Thats why im turning to someone here, that can do a through analysis of the audio that adobe or reaper just cannot do.
    In the attachments is the original file itself with no editing what so ever.
    Heres some collected data. 
    Frequencies of interest
    An analysis was undertaken to find the strongest frequencies acting within "dinosaur_noise". Linear and Logarithmic curves showed sets of dominant figures, with the most being:
    Frequency (Hz)
    Comments
    9092
    Largest spike before silence
    7862
    Very faint
    7812
    Very faint
    7657
    Very faint
    7502
    Largest spike in the 4000-9000Hz band
    3502
    various noise between 3502 and 3510
    360
    Another very visible wave. This was the most pronounced visible wave in the Logarithmic scale
    35
    The most dominant low frequency wave
    There are a few standout segments, not of voice data underneath, but visible clicks or something happening about 5 times. These could be indications of splices or other manipulations going on. The largest noticed broad-spectrum spikes were:
    Time(in samples)
    Comments
    55402
    First broad spike
    422931
    Second broad spike
    751643
    Third broad spike
    1081537
    Fourth broad spike
    1110841
    Fifth broad spike
    Silence in the frequency ranges is located in the band of 10.567 - 15.337 KHz. All frequencies above that are likely to be high frequency poinoning from the FFT process. 
    Heres what i know personally.
    -Noise reduction makes it a lot worse and adds strange harmonics and artifacts.
    -Most filters do the same.
    -Clear voice around 15 that says THATS AMAZING.
    If anyone cares to help I would appreciate it so much.
    Here are some links that might help.
    http://www.snotmonkey.com/work/school/405/methods.html
    http://pastebin.com/r90fEtnd C++ code
    Actual files in attachments 
    Attachments:
    dinonoise.zip ‏2554 KB

    LabVIEW has a sound and vibration toolkit.  Do you have that?  Do you have LabVIEW?
    The forum is made up of volunteers who will help others with their LabVIEW problems.  But you need to have a specific problem and ask clear questions.
    What you are asking for is very unclear.  Why do you even want to do a "thorough analysis of the audio"?  No one is going to do your project for you.

  • Installed New Fonts: Still cannot edit with Touch-up Text Tool

    I purchased the fonts I was looking for, installed them, re-booted everything, and I still get the following error message when I try to edit the text.
    HELP!  Even checked distiller and it's pointing to the correct file.

    It is also possible that you bought fonts that are not licensed for embedding. In such a case Acrobat will refuse to embed them. Why not just ask the author for a copy of the original file. It is better to edit an original file anyway and not a PDF.

  • I'm having issues with my Lumia 800. Please help.

    I recently bought a lumia 800 and the issues i am having includes-the bluetooth,it refuses to obey my commands at times e.g i cannot make another call immediately when i am through with a call .some times it will hang for about 2-3 minutes some one told me it can be the problem of the processor.
    Moderator's Note: We have moved your post and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.

    Can you post OS version,  Firmware and Hardware revision information from settings > about > more information please..
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Maybe you are looking for

  • GPIB-ENET driver 1.10 no longer works under Windows 2000 service pack 2

    I have used my GPIB-ENET adapters with Windows 2000. However, since I installed service pack 2, the GPIB driver 1.10 no longer works. It seems to install correctly and puts the GPIB icon in the Control Panel. After a reboot, however, the icon is gone

  • Cannot resize a window

    I am new to the Mac and am having a problem. I did a search but couldn't find an answer. I installed Adobe Lightroom and expanded the window to the point where I cannot see either the resize handle or the red, yellow, or green button at the top. I ca

  • Tag Search doesn't always show "best"

    I have lots of photos and have tagged these with quite a few tags. With some combinations of tags I get "best" "close" and "not", where "best" is photos with all selected tags, and "close" is photos with one or more, but not all the selected tags. Fo

  • New update creating an alternate icon in Windows menu

    Since the update to 12.1, clicking the iTunes icon in my menu creates a new window with an unknown icon. Does anybody know how to fix this. Please see picture for reference.

  • Server Admin is no longer showing the IMAP connections

    Hello, Did someone get this issue ? On a new Xserve Intel, I installed the updates for amavisd and spamassassin (thanks pterobyte website . All was working correctly, but I noticed that now I've 0 connections in my Server Admin "Connections" monitor.