Having trouble with updating...

Hi. I am trying to update iTunes using software update, but, whenever I try to update, all that comes up is an error window with the following:
*The update "iTunes" can't be saved*
You do not have the appropriate access privileges.
The Installer package has been moved to the Trash. To try again, open the package from the Finder.
I have tried to play around with the access privileges, but, it did not make a difference.

You library and settings will remain intact.
That's a big assumption to make, if the preference file that describes some of those settings is corrupted. I would at the very minimum clone backup your data before attempting anything so big, in case the update does make something more corrupt than it is already*:
http://www.macmaps.com/backup.html
At very minimum you don't want the update to trigger another failure somewhere else. Once corruption exists, it can multiply when updates are done.
- * Links to my pages may give me compensation.

Similar Messages

  • Having trouble with updated iTunes - iPod Nano 1st Gen.

    My iPod Nano [1st Generation] won't update or anything with iTunes 7.0!!! It worked with iTunes 6, but I downloaded 7 and it messed up my iPod - I tried deleting iTunes 7 and redownloading 6, but when I finished doing that, and I tried to get 6 to load, a window popped up that said "'iTunes Library.itl' cannot load because it was created on an updated version of iTunes" or something along that line. So now my songs are completely gone, I have NOTHING on my iPod because I had to delete iTunes 7... WHAT DO I DO!?!?!?!?!?!

    I tried to get 6 to load, a window popped up that said "'iTunes Library.itl' cannot load because it was created on an updated version of iTunes"
    the following post might be of some help with that:
    b noir: Re: How can i access my itunes library now ive gone back to 6.5 from 7?

  • I am having trouble with updating Itunes

    Hi can anyone help me out with this. The other day I tried to update my Itunes from 11.1.3 to 11.1.4. The update wasn't successful. I then tried to update via the Itunes website however that led me to a error message. That message said "Service apple mobile device. (Apple Mobile Device) Failed to start. Verify that you have sufficient privileges to start system services."
    Another thing that I tried was restarting my computer and that didn't help with the issue. I uninstalled Itunes and I am still getting the above error message when I am attemping to reinstall it.
    Has anyone else had this issue? If so is there anything that was done to resolve the issue? Everything with my itunes was working fine until I tried to update it.

    Hello, JRA24ever. 
    Thank you for visiting Apple Support Communities. 
    I think the best option would be to completely uninstall all components of iTunes in the order specified of the article below.  Once this is done attempt to install iTunes again.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    If the issue persists, try the steps in the article below. 
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    Cheers,
    Jason H. 

  • Anyone having trouble with updater 5?

    Just seems to hang after the updater 5 screen then do nothing.  server is still running under device manager.  I'm running T61 windows 7 with all updates.

    Same problem after automatic update to version 5 on a T420 using Windows 7 Ultimate x64.
    Starting, splas window appears for a few minutes and then nothing!
    Content of tvsu_exe.log:
    TSS(L) 1: 23:15:42:0517 tvsu.cpp(1825): Installdir: C:\Program Files (x86)\Lenovo\System Update
    TSS(L) 1: 23:15:42:0579 tvsu.cpp(1754): Installdir: C:\Program Files (x86)\Lenovo\System Update
    TSS(L) 1: 23:15:42:0579 tvsu.cpp(1775): szCmd: C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
    TSS(L) 1: 23:15:42:0673 tvsu.cpp(579): StartTvsukernel : admin
    TSS(L) 1: 23:15:42:0673 tvsu.cpp(586): Begin InvokeUacSdkViaService
    TSS(L) 1: 23:15:42:0689 tvsu.cpp(431): Installdir: C:\Program Files (x86)\Lenovo\System Update
    TSS(L) 1: 23:15:42:0689 tvsu.cpp(466): szCmd: C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
    Content of service_log.txt:
    Info 2012-09-25 , 11:15:42
    at Tvsu.Service.Client.CommandLauncher.ExecuteCommandLine(String command)
    Message: The current user is a Vista Administrator, the request will be handled by suservice -System context-
    Severe 2012-09-25 , 11:15:42
    at Tvsu.Service.Client.CommandLauncher.Main(String[] args)
    Message: Error launching command
    Exception:
    Message: Object reference not set to an instance of an object.
    Type: System.NullReferenceException
    at Tvsu.Service.Client.CommandLauncher.ExecuteCommandLine(String command)
    at Tvsu.Service.Client.CommandLauncher.Main(String[] args)

  • Having trouble with updating PS CC

    Update keeps failing and application Manager keeps closing? anyone know why

    You could try a password reset on your previous Apple ID. You may need to do this in the future for other software if you have purchased other apps with that previous Apple ID.
    How to go about a password reset.
    Go to appleid.apple.com. Click on the words "Reset your password" under the button "Manage your Apple ID". Just give them the other info they request. You will need to know what the email you used for your previous apple ID was. If you don't have that info, go to appleid.apple.com. Click on the words "Find your Apple ID" under the button "Create an Apple ID".
    Another option you could try if you have never paid for software using your previous Apple ID: Since iBooks Author is a free piece of software, why not go to the app store, choose to purchase it again with your current ID, and then try updating it. I have never actually done this, but it should work.

  • Still having trouble with update

    A month ago I tried updating to iTunes6. Once that occurred it told me that I needed quicktime 7.0.3 and that I have 7.0.2. I've tried uninstalling and going back to the cd software...but then my music won't play. All my music will be in the library, but it won't play. So then I redownloaded iTunes6 and the original message comes up. Can you send me a patch or send me an older version of iTunes? I can't update my mini without it.
    Thanks,
    Lexi
      Windows XP  

    hi Lexi!
    you're actually not talking directly to Apple. this is a user-to-user troubleshooting forum. see:
    What is Apple Discussions?
    Once that occurred it told me that I needed quicktime 7.0.3 and that I have 7.0.2.
    for that one, let's first try a careful standalone QT 7.0.3 install.
    download and save to your hard drive a copy of the QT 7.0.3 installer. (we'll run the install from there rather than online.) switch off any antivirus and antispyware applications prior to the install.
    Quicktime 7.0.3 Standalone Installer
    if you get an error message on the standalone install, let us know what it says. (include error message numbers if you're getting any.)
    if the install goes through, does your itunes launch again?
    keep us posted.
    love, b

  • Having trouble with updating from 4.0 to iOS 4.0.2.

    I have been trying to update my iPod since yesterday. I attempted 6 to 7 time but i got the same message again again saying "There was a problem downloading the software for the iPod. The network Connection timed out, make sure your network setting are correct and your network connection is active, or try again later".
    I don't see any connection error.My internet connection is working fine. But still i get the error message. Any help will be great. Thanks in advance.

    omg! dont do it!!!!!!!!!!!!! if you update you will have less battery life!
    almost all apps will not be compatible!
    ipod will crash frequently
    PDF exploit patch,,,which is bad if you want to hack
    trust me dont upgrade! you will regret it, all your paid for apps will not work,,
    half of my apps dont work right and im on os4 4.0.2 is even worse!

  • Trouble with updating apps

    Having trouble with updating some of my apps. You Tube esp.

    Apps are tied to the account that downloaded the apps, not to the device that they are on, so any apps that your son downloaded can only be updated via his account and vice versa.
    You can sign in and out of accounts via Settings > Store and tapping the account on the right-hand side. If you no longer use the apps that your son downloaded then you could delete them (or if they are free apps you could delete and then download them under you account) - you could always reset to factory settings (Settings > General > Reset > Erase All Content And Setting) and reload just your apps from scratch (apps can be re-downloaded for free : http://support.apple.com/kb/HT2519), which is a 'cleaner' way of doing it

  • I am having trouble with my Mac Mini's ethernet connection.   Defining a new network interface shows no ethernet adaptor.  Reloading SL from DVD repaired.  But SL update lost ethernet again.  Will Lion Fix?

    I am having trouble with my mac mini ethernet.  It had been working for weeks after an update to SL 10.6.8.
    Once it went out and i repaired it by defining a new connection from System Preferences ->Network->(left panel service, +).
    But yesterday, after a power up.  my ethernet was not working again. I tried this old trick to repair it, but the interface choices
    listed for '+' a new service did not include Ethernet any more.  And the Utilities->System Profiler->Ethernet Cards shows
    no ethernet available.
    As a last ditch effort i reloaded my original SL from DVD.  (I think it was version 10.6.4 but i could be mistaken on the version).
    The ethernet worked!  But KeyNote wasn't going to work because apparently the version i purchased depends on 10.6.8.
    So I upgraded again to SL 10.6.8 (Plus some other updates like AirPort which i don't use).
    Now the Ethernet is not working again.  I see the same symptoms as before with the Ethernet seeming not installed.
    Is this a problem seen by others?
    Would going to Lion fix the problem?
    Could AirPort actually be the culprit and not SL?
    If i stay with my original SL, would i need to repurchase a version of KeyNote for the older version of SL?

    Have you reset the SMC?
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    While you're at it, resetting the PRAM won't hurt anything and 'might' help is SMC reset didn't work (PRAM does some port control):
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Something else you might try .... you don't say how you're updating to 10.6.8, however, if you're using Software Update, you might try downloading the 10.6.8 combo update, which contains all updates to 10.6. Sometimes, Software Update doesn't work quite right, and installing the combo update fixes that. Download the update from Apple's download site at http://support.apple.com/downloads/ , using Disk Utility repair permissions, apply the combo update, then repair permissions again.

  • I am having trouble with app updates on my iOS 5 iPhone never getting beyond the "waiting" state.

    I am having trouble with app updates on my iOS 5 iPhone never getting beyond the "waiting" state. I have tried signing out/in of my account, rebooting and removing/re-installing the apps.  This started shortly after going to iOS 5 but I am not certain if that is related.  All updates that I try now are stuck in "waiting".  I also tried removing the apps and then installing via iTunes desktop sync with no improvement.  The only thing that I have not tried so far is a restore to a prior iPhone backup.  I have not been able to find anything to indciate what the updates on waiting on.  There is plenty of space on the iPhone (16gb available).  Any suggestions on what to try next? 

    Hello there, Missy.
    First thing I would recommend is to check your downloads queue to make sure there is not an interrupted download per the following Knowledge Base article:
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/HT1725
    If your download was interrupted using your iPhone, iPad, or iPod touch
    1. From the Home screen, tap the iTunes app.
    2. For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
    3. Enter your account name and password if prompted.
    4. Tap the blue download arrow to resume.
    If you can't complete the download on your iOS device, you can download it in iTunes on your Mac or PC and then sync it to your iOS device. You can also transfer purchases from your iPhone, iPad, or iPod to a computer.
    For Apps, you can also try tapping on the application icon to resume the download, as outline in this featured discussion:
    App updates won't download on my...: Apple Support Communities
    https://discussions.apple.com/thread/4111336
    Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
    Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
    If that doesn't do it, try resetting or restoring the iPhone.
    via whatheck
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords

    I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .

    Connect the device to iTunes and restore from the most current backup.
    If the issue continues, restore as new.

  • I'm having trouble with my Pages app. Over half of my document are updating, and do not finish. I cannot get to the documents. This has been going for 2 weeks now, they do not update.

    I'm having trouble with my Pages app. Over half of my document show that they are updating. I cannot open or delete the documents. Does anyone know a fix for this? Please help.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
    Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702http://support.apple.com/kb/TS1702
     Cheers, Tom

  • HT3180 Anyone having trouble with Netflix not showing up in the internet menu?  I am trying to do a reset, but it says it can't download latest updates try again later.

    Anyone having trouble with Netflix not showing up on the Internet Menu?  I have tried to do a reset and then restore, but it says that "the latest update download cannot be done at this time, try again later"

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.

  • HT4528 I am having trouble with the touch screen.  When I press - on the glass surface sometimes it doesn't respond back.  I updated my software.

    I am having trouble with the touch screen.  When I press - on the glass surface sometimes it doesn't respond back.  I updated my software.

    This Apple doc might help ya out -> iPhone, iPad, iPod touch: Troubleshooting touchscreen response

  • HT4623 I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do???

    I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do??? If possible, I would also like to keep all of my data.

    Maybe this will help:
    Troubleshooting
    As with all clickwheel iPods, you can reset this iPod by first toggling the hold switch on and off and then simultaneously pressing the select (center) and menu buttons for approximately 5-10 seconds. This is a common fix should your iPod behave unexpectedly or lock up. Once reset, the iPod should display an Apple logo for a few seconds before showing the main menu. This procedure is similar to rebooting a computer and damages none of your music or data.

Maybe you are looking for

  • User access at IO level

    I have 2 OUs-- OU1 and OU2. OU1 has 1 inv org-- IO11 OU2 has 2 inv orgs-- IO21 and IO22. I will define responsibilities at IO level, i.e., 3 responsibilities for an application --R11(for IO11), R21 (for IO21) and R22 (for IO22). I want to restrict us

  • What is the last version i can use that still has MY TIMEZONE SETTING for ebay?

    I upgraded to your newest version and lost the time zone setting thing so i tried your nightly devel tool thing and was crashing a hanging because of the amount of memory i think. So i got rid of that installed a 2 something version and now have it b

  • Where used in web templates  for parameter groups

    Does SAP deliver any where used functionality for parameter groups? I need a report or function that can take as input a parameter group (fully qualified) and deliver back all the web layouts and planning folders that the parameter group (or for that

  • Delete in xsql:dml vs xsql:delete-request and returned rows attribute

    There is a difference in the number of rows returned between using a delete in xsql:dml vs xsql:delete-request. If I issue a delete via xsql:dml and the row I wish to delete is not in the table, then I get a result with rows equal to 0 as expected. H

  • Safari opens with old tabs on start up

    Safari keeps opening with old tabs from about 3 weeks ago rather than my home page. On start up safari is showing as open and there is a folder in the right hand part of the dock. This has the old tabs in it and safari opens with these and not my hom