Having trouble with voltage alarm in core center

I hadn't used this comp for about a year, just put it back together and added the kingston ram to it that a buddy gave to me. Just found Core Center online and installed it. The problem i'm having is that the alarm is going crazy. Don't have alot of experience overclocking, and i'm not actaually trying to at all. I've been having programs close and games freeze up because of overheating. This is what I see when I look at the core center.
on the left
1.39 v
  Vcore
2.72-82 v (flashing red)
 3.3V
4.97 v
 +5v
11.84-90v
 +12V
If I open the tab, the FBS says 200mhz and is flashing blue to black
doesn't look like i'm having any problems with cpu temp. 35 'C
Any help would be appreciated.
Thanks

Quote from: kourosh on 19-November-08, 01:58:25
do you know how to enter into bios if so then click on default save and exit then see what happens, somehow it looks the voltage for memory has been set 2.7 or 2.8 volt which is too high it should be 1.8 or 2.5 volt
Yea its at 2.5 i beleive. I reset everything to default, and it has been since i put everything back together. Before i had core center installed it was crashing guild wars, and wow consistantly because of overheating. I'll unistall core center and get a monitering app instead.

Similar Messages

  • Hello, I'm having trouble with my ipod

    hello, I'm having trouble with my ipod

    Holding down the center/select button and the menu button will reboot your ipod. See if that helps. Also, I'd recommend something else- I had nothing but trouble with my ipod classic until I spent $20 to get Mac OS Mountain Lion. It did what you said and sometimes wouldnt play, or wouldnt power on...
    Try rebooting your ipod and let me know what happens and maybe in the future obtain Mountain Lion to aide your ipod in functionality.
    Good luck!

  • I am having trouble with some of my links having images. For example, Foxfire has a picture that looks like a small world. The links in question are blank.

    I am having trouble with my links/websites having images attached to them. The place where the image should be is blank. For example, AARP has an A for its image. My storage website has a blank broken box where the image should be. I forgot I had trouble and had to reset Foxfire, this problem occurred after that reset.

    cor-el,
    Mixed content normally gives the world globe image, unless you are using a theme that uses a broken padlock instead. Maybe the gray triangle means invalid? I came across that in a few themes (what is invalid was not made clear), but those were not using triangle shapes to indicate that.
    I came across that mention in one of the pages you posted:
    * https://support.mozilla.org/kb/Site+Identity+Button
    I cannot attach a screenshot because I have not seen a triangle of any kind in my address bar.

  • Are people still having trouble with iPhone/HP Laptops?

    Since I've had my Envy I've had no end of trouble with getting it and the iPhone to play nice. Any my search continues. So far, I have updated every bios, reinstalled Windows 7/iTunes many times, have restored the iPhone far more times than I care to remember and I am STILL having troubles with this thing. Having got through the Syncing issues with the PM55 chipset and iPhone I can now sync with my laptop. However all is not well as it would seem that I cannot sync my photo's. It doesn't matter if I have 0gb, 15gb or 30gb free, iTunes is telling me that there is not enough memory available. This error seems like an old one and there is even some info in the Apple KB but after following all that I still can't get it to sync my photo's.
    Some info on my setup:
    HP Envy 15 (all the latest drivers installed, bios F.24) Core i7-820, 8gb ram etc.
    iPhone 32gb, ver 3.1.3
    iTunes (whatever the latest one is)
    I should add that I can sync my iPhone with an identical install of intunes on my vintage Quad core desktop PC, but as I use my Laptop a lot more (and have all my media, email, and contacts etc on it) I would prefer to sync to it.
    Is there anything that I can do? Its very frustrating to have blown $4k on this equipment and it doesn't work...

    Well I tried deleting the photocache but alas, no luck. I also tried syncing with just the photo's enabled, and it worked! So then I enabled my other media and that copied across too! I thought I was on a bit of a roll here, but now whenever I try and sync it will do one of 3 things:
    iTunes will crash.
    iTunes will indicate that there is not enough memory on the device (+9GB free)
    iTunes will remove the iPhone from the sidebar (and my computer/disk management) even though it will continue to charge.
    Interesting point to note is that it works fine (cable/iphone/itunes/media library) on my desktop and macbook. Still really disappointed that I cannot get these two to cooperate. Also still haven't got any contacts from outlook but that may not be related?

  • I'm having troubles with Mail. Some mails (in particular to gmail addresses) are not sent.

    I'm having troubles with Mail. Some mails (in particular to gmail addresses) are not sent. When sending an email, Mail apparently works for a while but does'nt sent anything. I repeated sending the mail with the same result and 2 or more mails in the draft folder. Yesterday I discovered that the mail had been sent 4 times!. Now I have the same problem: the mail has not been sent, it appears in the draft folder, I try to delete it but the mail remains in the draft folder. This happens after updating to Mac OS X 10.7.2 and migrating to iCloud.
    I have MacBook 2 Ghz Intel Core 2 Duo, 4 Mb ram memory, Mac OS X Lion (10.7.2).

    If those music are greyed out in iTunes on your laptop, are you able to play the music? If you cannot, it means that you probably deleted the mp3 file or moved it to another location where iTunes can no longer find. If they are greyed out on iTunes and cannot play them, I would just right click and delete it. Then re-sync with your iPad.

  • HT4623 I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do???

    I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do??? If possible, I would also like to keep all of my data.

    Maybe this will help:
    Troubleshooting
    As with all clickwheel iPods, you can reset this iPod by first toggling the hold switch on and off and then simultaneously pressing the select (center) and menu buttons for approximately 5-10 seconds. This is a common fix should your iPod behave unexpectedly or lock up. Once reset, the iPod should display an Apple logo for a few seconds before showing the main menu. This procedure is similar to rebooting a computer and damages none of your music or data.

  • HT203433 I'm having trouble with the purchased stickers.

    Dear iTunes Store Help Center
         I'm having trouble with the purchased stickers. I purchased LINE Sticker, Doraemon & Doremi. But Sticker are not show in my Sticker history and can not use sticker (Doremi). Please advise me what to do.
    My registration details:
    - Country : Thailand
    รายการ
    ผู้พัฒนา
    ประเภท
    ราคาต่อ หน่วย
    LINE, Doraemon & Dorami
    รายงานปัญหา
    NAVER JAPAN
    การซื้อผ่าน App
    $1.99
    LINE, Doraemon
    รายงานปัญหา
    NAVER JAPAN
    การซื้อผ่าน App
    $1.99
    ยอดรวมของใบสั่ง:
    $3.98
    <Personal Information Edited by Host>

    Most of the people on these public forums, including myself, are fellow users - you're not talking to iTunes Support here. I've asked the hosts to remove your email address from your post.
    Have you tried the help on the developer's site : https://line.naver.jp/help/iphone/en/serviceId/10155/sp ?
    If you haven't received the items then you contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Having trouble with the most simple of things: Static IP

    I am having trouble with the most simple of things: Static IP.
    I am working in Windows Server 2008 R2 SP1.
    "Control Panel\Network and Internet\Network and Sharing Center\Local Area Connections>Properties>Internet Protocol Version 4 (TCP/IPv4) and Internet Protocol Version 6 (TCP/IPv6)"
    IPv4: I have went to "ipconfig /all" and found the "preferred" IP Address and the Default Gateway. 
    Assign DNS Servers?
    IPv6: I used "netsh interface ipv6 show address level=verbose" and found 3 usable IPv6 IPs.
    Assign IP Address, Default Gateway and DNS Servers?

    What is the question?
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Anyone else having trouble with FCPX crashing after the OSX update?

    Anyone else having trouble with FCPX crashing after the OSX update? It NEVER crashed until the update. The night before last it crashed 20 times in 45 minutes. I can't finish my project because of it.
    Retina, Mid 2012
    Processor  2.3 GHz Intel Core i7
    Memory  8 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GT 650M 1024 MB
    Software  OS X 10.9 (13A603)

    therealamaru wrote:
    I don't understand the question. I am simply editing.
    There are some patterns of crashes that suggest possible causes and fixes; some users report crashes when FCPX is in the process of loading; others while importing/exporting, etc. Asking to narrow the list of possibilities.
    Suggest starting with three things:
    1) Update the software from the APp Store  if need be.
    2) Trash preferences.
    3) Repair permissions.
    Russ

  • I am having trouble with sound on my iPad

    I am having trouble with sound on my iPad

    Found the fix.
    If the reboot doesn't fix it.
    If the headphoens work find, but no external speakers.
    If the double-click and page right to the software mute, doesn't show the sound knob - just the brightness
    If your pop-up shows "Docking Station"
    Then, the problem is very likely a dirty connector.  The iPad/iPhone/iPod connector uses a resistor value to determine if the device is connected to an external 'speaker'.  There are a range of resistances, for a range of products.  This is known as the Connector Pin 21 issue.
    Take some windex on a que-tip, or perhaps a Windex paper scrub and rub it on the bottom connector port.  Somehow, "something" has gotten on those contacts, and it is pulling the voltage on pin #21 down - so that the iPad "thinks" it's connected to an external speaker - this will disable the internal speaker circuitry, as well as the internal speaker volume controls.
    Do not over-saturate and short out your iPad.  Do not throw it in the sink, do not use the kitchen faucet to flush it out.  A Que-tip with a few drops of Windex (or other gentle cleaner) should work just fine.  Takes all of 30 seconds - and magically, the volume knob appeared and everything worked just fine.

  • Having trouble with iCloud Photo Stream on a Windows Vista 64 machine.

    Having trouble with iCloud Photo Stream on a Windows Vista 64 machine.  Can you tell me why Photo Stream will not stay enabled.  When I reboot, it will disable not to mention that it will not get any pushed photos.  Is there a 64 bit version?

    Hello tw_mama,
    I was looking into the issue you are experiencing and found an article that may shed some light on the subject. It's called iCloud: Account troubleshooting found here: http://support.apple.com/kb/TS3988
    This section in particluar:
    I get an "Unsupported Apple ID" error when I try to sign in to iCloud from my iPhone, iPad or iPod touch.
    Depending on how you created your Apple ID, you may not be able to create an iCloud account with your current Apple ID. If your Apple ID works in the iTunes Store, App Store, Game Center, FaceTime, or with other Apple Services, your Apple ID should work for iCloud. Also, if you created your Apple ID while you applied for a job at jobs.apple.com, your Apple ID should work for iCloud. If you cannot use your Apple ID with any Apple Services, it might not be compatible with iCloud. Contact iCloud Support for assistance.
    All the best,
    Sterling

  • Having trouble with getting on messages and facetime

    having trouble with getting on messages and facetime.  Got two new ipods, one works fine, the other keeps giving us the error: iMessage Activation Could not sign in.  Please check your network connection and try again.  We have tried to reset the factory settings, and verified that the internet is working.  Please help!

    FaceTime, Game Center, Messages: Troubleshooting sign in issues

  • I've been having trouble with in getting iMessage to send messages. I decided to connect to my VPN (along with wifi) and it worked. Why won't it work via my wifi connection alone?

    I've been having trouble with in getting iMessage to send messages. I decided to connect to my VPN (along with wifi) and it worked. Why won't it work via my wifi connection alone?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hello Sue,
    I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
    I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
    It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
    Michael

  • I'm having trouble with something that redirects Google search results when I use Firefox on my PC. It's called the 'going on earth' virus. Do you have a fix that could rectify the vulnerability in your software?

    I'm having trouble with a virus or something which affects Google search results when I use Firefox on my PC ...
    When I search a topic gives me pages of links as normal, but when I click on a link, the page is hijacked to a site called 'www.goingonearth.com' ...
    I've done a separate search and found that other users are affected, but there doesn't seem to be a clear-cut solution ... (Norton, McAfee and Kaspersky don't seem to be able to detect/fix it).
    I'd like to continue using the Firefox/Google combination (nb: the hijack virus also affects IE but not Safari) - do you have a patch/fix that could rectify the vulnerability in your software?
    thanks

    ''' "... vulnerability in your software?" ''' <br />
    And it affects IE, too? Ya probably picked up some malware and you blame it on Firefox.
    Install, update, and run these programs in this order. They are listed in order of efficacy.<br />'''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' <br />These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have.<br />
    ''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
    Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] <br />
    SuperAntispyware - [http://www.superantispyware.com/] <br />
    AdAware - [http://www.lavasoftusa.com/software/adaware/] <br />
    Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] <br />
    Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]<br />
    Also, if you have a search engine re-direct problem, see this:<br />
    http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
    If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: <br />
    [http://www.spywarewarrior.com/index.php] <br />
    [http://forum.aumha.org/] <br />
    [http://www.spywareinfoforum.com/] <br />
    [http://bleepingcomputer.com]

Maybe you are looking for

  • Display cross-references' linked documents filename in the xref panel

    Our company creates technical manuals consisting of five chapters, all named the same, except with a different prefix. For example the "ABC Widget" manual has an introduction chapter named "ABC 1 - Introduction", a safety chapter named "ABC 2 - Safet

  • What's the best out-of-the-box web interface for a SQL DB?

    I'm developing a Java web application that will be backed by an Oracle database. Users would like a simple web interface that allows them to accomplish what they could with SQL queries without knowing SQL. The basic operations would be: * displaying

  • Repeating structure through the receiver file adapter

    I wanted to ask wheter it is possible to create repeating structure through the SAP xi receiver file adapter. What I'm trying to accomplish is this: Item1 Item2 Item1 Item2 (variable number of times). I can accomplish the following: Item1 Item1 Item2

  • Two web services in a pdf form

    I m designing a process which has two web services (adobe livecycle workbench) I can get respond from each of them but that means I have two xmls. The problem starts from here .I need one document put into pdf however I have two Documents, one from e

  • Login failure

    I'm using a Creative Cloud account to publish Single Edition DPS FOLIOS, but before I publish them, I'm sharing the FOLIOS with members of my team make any corrections. The e-mail addresses I'm sharing them with have Adobe IDs, but they're unable to