Having troubling exporting a quicktime video

When I try and export a video as a quicktime video i am getting a message saying 'unknown compiling error'. I've tried exporting as other files and it would work but i need it to be a quicktime. Any help would be much appreciated.
Thanks!

I am using adobe premiere elements 11 on a mac osx version 10.9.2. I am
using the lastest version of Quicktime. I am going to the publish and share
tab in the upper left hand corner. Then I go to Computer: view files for
viewing on computers. When I select this option the presets and settings
tab comes up, then I click save. Then a screen will pop up saying my video
is being rendering and saved. Then a message comes up that says 'error
compiling video:unknown error'

Similar Messages

I am having trouble exporting closed captions from premiere cc 2014.

I am having trouble exporting closed captions from premiere cc 2014. I see them in the program monitor but after i export and try to playback in either quicktime or VLC i get to embedded captions. I eve tried the side car file and embedded with compressor and still nothing. Any help would be appreciated.
I only used compressor because i switched from final cut to adobe. easy fellas!

I have latest QT version, do i need to go back to 7? I have tried VLC also, i usually use that to check CC in mpeg files. I am exporting a QT H.264 for just testing purposes, I need a prores HQ, also this is SD so my sequences are set to 720x486.

Sony just isn't helping me. I'm still having trouble transferring my NX3 video files.

Well, I'm still having trouble transferring my NX3 video files to my editing software. Sony suggested using the Sony Content Browser but that doesn't work. Sony just can't seem to help me. If the scene shot on the card is longer than 10 minutes, 4 frames of audio is lost from each file. So if you shoot 60 minutes straight (say a wedding, you loose audio every 10 minutes) I guess this doesn't sound important, unless it happens just as the bride is saying "Yes" in her vows.
My original post is as follows:
Sony NXCAM (NX-3) drops audio tracks when importing into FCPX and Premiere.
I called Sony on Feb 13, 2015. I spoke with Doug (case no. 661972). I've been using my NX-3 for about 3 months. I'm still testing Sony NX-3. Looking for a way to transfer the video and audio without dropping audio frames. I didn't catch it at first, I mean it's only a few audio frames. It seems to happen with files over 12 minutes shooting. It seems that I can't upload the video/audio shot in my NX-3 to either my iMac (using FCPX nor Premiere) nor can I upload it to my PC (using Premiere) without 3 to 6 audio "frames" being dropped. When I spoke with Doug at Sony, a person I've actually spoke with in the past, he seemed frustrated. I was speaking with him as a professional and was attempting to find a solution, he was being protective and wanted to place blame at other companies. He stated that the camera played back the files correctly so it isn't a Sony problem. I explained that it is a problem for all of us if we choose Sony as our purchase. He told me "you should all buy Canons next time." That kind of through me. How do you speak to that. I explained that I am just looking for a solution and he told me to call the software and computer companies. Doesn't Sony realize that just because the camera works, that isn't the end of the road. You need to put the video into a devise to edit the video. I asked him what software would he recommend to a professional to use to edit footage taken by the Sony, he no reply. All I received from Doug was a really bad feeling about Sony. I've been a Sony "shooter" for over 34 years. I still can't believe the way I was treated. Not sure now what path I will take with this. But I surely need to tell everyone (all of my associates who have been asking me how I like my new camera) what response I received from Sony. Buy a Canon. By the way, I asked if Sony might have another camera of the same type that didn't drop audio. Doug didn't know. Really strange. Is Doug not happy with his prosition with Sony?

Auto Correct:
As far as I'm aware this cannot be turned off. Someone may prove me wrong on this point
CDDB Update:
Again, as far as I'm aware this cannot be done. You could use WMP to update the files then import them into iTunes.
Music Deletion:
iTunes seems to only ask you if you want to delete a file if the file is located in its library folder. In the Preferences>Advanced>General section try changing your iTunes Music Folder to the folder where all your music is stored and it should ask you if you want to move files to the recycle bin when you delete them.
Library Update:
This is a feature I with iTunes would introduce. When you delete or move a file iTunes loses track of it. What it needs to be able to do is first check to see that all the existing files in the library are still there, and remove the ones that aren’t, then it needs to search for new tracks.
It can search for new tracks but if you have renamed a file, then it will be in the library twice, one is the old file (which will no longer play because it doesn’t exist) and the other is the new file.
The way I now avoid iTunes annoyances in relation to file names and folder organisation is I let iTunes sort it all out for me. Selecting "Keep iTunes Music folder organised" and "Copy files to iTunes folder when adding to library" will get iTunes to sort your music into Artist folders, then within the Artist folders are Albums, then within the album folders are the actual files, which are named Track Number Artist. For example Coldplay - Clocks will be named 05 Clocks.mp3.
WARNING: Selecting "Keep iTunes Music folder organised" will copy all the music in your library to the iTunes Music folder. You must have enough Hard Disk space to do this.
...that wound up longer then I thought it would. Hope you can make sense of it all.
Cheers,
Ben

I am having trouble exporting .raw files to an external storage device. Even though I export "original" they end up as jpeg files. Any idea what I am doing wrong?

I am having trouble exporting .raw files from my Mac Book Air to an external storage device. Even though I am exporting as "original" they are being exported as jpegs. Anyone have an idea what I am doing wrong?

Using the "original" setting is the correct way to do it. Select on of the photos and use the File ➙ Reveal in Finder ➙ Original menu option. That will take you to the file inside the library via the Finder. Confirm that what you see if the raw file.
If it is then try the following: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

I am having trouble exporting my responses, how do I save all responses as an Excel table?

When I click on the Save as Excel button, and then click OK to export all cells to Excel, it gets stuck "Converting..." and does not process.

I'm also having trouble exporting my responses. I get a message that says:
I was able to copy everything and make my own excel sheet, but would still like to know what I can do.. And it's not only for this one form, I get the same response for all my forms.

Export as Quicktime Video - with alpha

I'm having trouble figuring out how to export an animation
I've created in Flash as a Quicktime Video with transparent (alpha
channel) background. My client wants to import it into Final Cut
and have it play over a video track.
I've used the "export movie" feature in flash with the
following settings. (I have Quicktime Pro installed.)
Format: 32 bit color (alpha channel)
Compressor: Animation
Quality Default setting
Sound 44Hz
Maybe there's nothing wrong with my export settings... maybe
I need to specify a layer in my flash movie as the alpha channel? I
can't find any documentation to help!
Anyone have a clue?
See an example-->
http://www.element-group.net/brini/trans_vertical.html
The white background will need to me transparent to reveal
the video track.
Thanks,

I forgot to say that making the Flash track transparent is an
intermediate step.
After that, import the .mov to Final Cut.
QuickTIme can only support Flash content of Flash 5 and
under.
Do you realize that QuickTime 7.1.3 has "Enable Flash" off by
default. To see Flash tracks in QT player or browser plug-in, you
now have to open the QT Preferences or settings, click Advanced Tab
and check "Enable Flash".
However, if you just want to get Flash content as an
animation in Final Cut, here is a good article that helped me do
it.
Migrating Flash Projects to Video
http://www.adobe.com/devnet/flash/articles/flash_to_video_02.html
I'm working on one now, work-in-progress at:
http://tinyurl.com/hpare
The heart fountain and the animated logo at the end were both
made in Flash.

Having trouble exporting photos from iPhoto to external drive.

I am having trouble copying files to my external drive. It is a shared external drive connected through my wireless router. I can copy some photo's to the externaldrive folder and they transfer no problem and some of the photo's from the same folder appear to be transfering but as soon as the copying window goes away so does the photo's from the folder I was putting them to. New to apple so I am still learning the in's and out's and I am sure it's probably something easy. Any help would be appreciated. The external drive I was using on a PC before and the Mac seems to see most everything so not sure if that matters or not. Pic and video's came from same camera on the same day.

is there anyway to transfer direct to the hard-drive?
What does that mean? Do you mean have your Library on an external drive? Yes, that's easy.
I have a network HDD connected to my router
Two issues here.
1. That NAS is not an appropriate disk for an iPhoto Library - iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos. Later versions simply won't allow the Library on such devices.
2. Router? Wireless connection? A strong warning: If you're trying to edit the Library (that is, make albums, move photos around, keyword, make books or slideshows etc.) or edit individual photos in it via Wireless be very careful. Dropouts are a common fact of wireless networking, and should one occur while the app is writing to the database then your Library will be damaged. Simply, I would not do this with my Libraries.
To move an iPhoto Library:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Having trouble exporting mpeg2 files from FCP 3 - please help me!

I haven't made a DVD for a little while, in the meantime have upgraded my operating system from 10.3 to 10.4 and am completely up to date with QT etc. I have Final Cut Pro 3, DVD Studio Pro 1.5 and Quicktime 7.3. The problem now is that when I try to export my edited video as mpeg2 from FCP, FCP immediately quits- I just can't figure it out... it leaves a file icon in the destination folder but apparently the error in the crash report means that I'm trying to write to a read only destination!?
look! ->
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x900b8c90
and this->
Thread 10 Crashed:
0 com.apple.mpeg.QTMPEGExport 0x095e6634 SingleEntryPointInitialize + 52
1 com.apple.mpeg.QTMPEGExport 0x095f828c MPEncode2__FP11CallbackRecP15EncodeParamsRec + 488
2 com.apple.mpeg.QTMPEGExport 0x095f85b4 MPEncode__FP11CallbackRecP15EncodeParamsRec + 16
3 com.apple.mpeg.QTMPEGExport 0x095e7fe8 DoIt__FP6FSSpecP11MovieRecordP19PixelToolsParameterlxP17CProgressReporter + 892
4 com.apple.mpeg.QTMPEGExport 0x095e48ec QTtoMPEG2__FP6FSSpecP11MovieRecordP13ConvertParamsllP17CProgressReporter + 1048
5 com.apple.mpeg.QTMPEGExport 0x095e297c EncodeMPEGandAIFF__FP15MPEGPrivGlobals + 1992
6 com.apple.mpeg.QTMPEGExport 0x095e20f0 EncodingThread + 60
7 ...ple.CoreServices.CarbonCore 0x90b6e0d8 InvokeThreadEntryUPP + 24
8 ...ple.CoreServices.CarbonCore 0x90b6dcf8 CooperativeThread + 220
9 libSystem.B.dylib 0x9002b200 pthreadbody + 96
thanks for reading this far! anyway I've tried suggestions for similar sounding problems, they haven't worked - anybody
got any ideas?

Can you use DVDSP to do the encoding for you?
FCP3 was really not intended to be run from Tiger, in fact, I believe it will not install on a clean 10.4 disk.
x
Do your part in supporting your fellow users. If a response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
Also, don't forget to mark the thread Answered when you get enough information to close the thread.

Trouble exporting with QuickTime 7 to UNCOMPRESSED 10-bit 4:2:2

I have succeeded with shorter videos, but my 90 minute video returns "error -2125".
Somehow I managed to do this before, I'm not sure what has changed on my system. Does anyone else have trouble exporting to Uncompressed 10-bit 4:2:2 ? I'm now exporting to ProRes instead, but would prefer uncompressed video for the sake of quality.

You don't say what's the source of your clips.
If standard DV (..though I doubt that an agency would accept standard def video any more..) NTSC DV is compressed in the camera as 4:1:1, and PAL DV is compressed as 4:2:0 ..so you won't get true 4:2:2 from normal DV, unless you're using a broadcast camera (..probably feeding into the capture device via SDI inputs).
If the source was tape-based HDV or any other hi-def source, then iMovie converts that, during import, into Apple Intermediate Codec, and wouldn't be able to output proper Uncompressed 4:2:2 material.
For Uncompressed 4:2:2, I think you'll need to be using a dedicated capture card - and massive-capacity hard discs! - to be able to import the material in the first place.
iMovie certainly isn't the program to handle pro video of this nature.
Ask in the Final Cut Pro Discussions..
"..I've also tried doing this on my Macbook with Intel processor.." ..but maybe that's just not fast enough (older Mac portables have "shared graphics memory" ..meaning their graphics processor may have to compete with the main processor to temporarily grab free RAM)!

I am having trouble getting sound on video clips I have imported into Premiere Elements 10.

I am having trouble getting sound when importing video clips into Premiere Elements 10. Is someone able to offer me a solution as I have no idea what I have done to cause this to happen.
The clip has sound when opened with windows media player.
Thank you

Hi Steve,
After reading everybody’s responses I am feeling a little out of my depth. Being new to this I am having difficulty in understanding a lot of the information given to me and also in the information you require from me. It appears that one thing I should never do is mix film from two different cameras. I would really like to fix this one particular clip though as it holds an interview that was taken when leaving Coober Pedy and something that I don’t want to lose.
I have today done some research on the camera that took the offending video clip. It was a Samsung S85 and according to the Samsung website it uses MJPEG video format.
Here are the specifications as per the Samsung website.
Camera Type
Ultra-Compact Point-and-shoot Digital Camera
Image Quality
Image Sensor
1/2.5" 8.3 Megapixel CCD
Effective Resolution
8.2 million pixels
Color Depth
24-Bit RGB
Color Modes
Normal, B/W, Sepia, Negative, Red, Green, Blue, Custom Color
Image File Formats
JPEG (Super Fine, Fine, Normal)
Recorded Resolution
8M (3264 x 2448)
7M (3264 x 2176) - 3:2
6M (3264 x 1824) - Wide
5M (2592 x 1944)
3M (2048 x 1536)
1M (1024 x 768)
Video Recording
AVI Motion JPEG with Audio
640 x 480 @ 30 or 15 fps
320 x 240 @ 30 or 15 fps
Clip length limited only by available memory
5x optical zoom available during video record
Audio Recording
WAV format (monaural)
I downloaded and installed Media Info and Morgan Multimedia MJPEG Codec V3.99.108 today. Do I have to register it to get it to operate? I read the documentation file that came with it hoping to find a clue as what I should do but I could not comprehend the information it contained.
Thank you and other members who have responded to my plea for all the help you have given me.
Judy

Having trouble exporting file from After Effects CS5.5

I am trying to add some titles to a Multi Camera mix I have finished. I have exported my multi cam that I created in Premiere Pro as an MPEG.
So hears what I have done:
- open After effects
- create new composition (HD 1080x1440- length 2:16 (so clip fits)
- I place my clip in the time line the type some text.
- in the effects bar I click the roll up and select "Browse Presets" which opens adobe bridge
- I apply my effects and they play back in elements fine...
When I try to export my clip as a Premiere Pro Project it doesnt keep my animated txt when I open it. Says it does not support the presets. his
Con someone please help me export this project? Getting very frustrating. I need it as a High Res HD file

Create the titles in After Effects without the MPEG. (Or if you must use it as a reference, go ahead and do so, and then when you're done creating the title, delete the MPEG.)
Then go back to PP and select File>Dynamic Link>Import After Effects Composition... Navigate to the AE project that has the title, and bring in that composition. It will appear in your bin as a clip. Then you add it to the sequence and export the completed video with titles.

Trouble exporting to quicktime

I created a new keynote file using keynote08 trial version and tried to export in quicktime.
However, new slide transitions are not exporting as shown in keynote.
Is it just me only, or exclusively to trial version?
Is anyone experiencing same problem?

The bug has to do with wave file in my slide.
When I delete the wave file in slide, slide transition effects work same way as in quicktime export or in actual keynote presentation. But slides with wave file shows the problem.
I am not sure why it has such problem. Previous keynote version did not have this kind of problem. Slide with wave file was exported to quicktime without any problem in keynote 3 version in iwork06.

Having Trouble Exporting .mov files

Hi, I've been trying to export a lossless quality .mov file of a presentation I shot a couple weeks ago. It's about 3.5 hours long and is being an absolute pain. It takes over 8 hours for it to export the quicktime animation file, and then it ends up being around 250gb which is way way wayy to big! The files I put into the timeline only add up to 21 gb, why is it doing this? Even when I used an h.264 codec, the file is still around 100gb and it took 12 hours to encode!! Can somebody please help me with this? I need to get this footage to the company I shot for. Thanks!
Export settings
Quicktime Animation
Quality 100, 1280x720, 29.97 fps, progressive

> and then it ends up being around 250gb which is way way wayy to big! The
files I put into the timeline only add up to 21 gb, why is it doing
this?
Losslessly compressed files are huge. That is an unavoidable fact. 250GB is an unsurprsing size for a 3-hour movie that is losslessly compressed. The fact that your input files were 21GB has nothing to do with it. Those files were heavily compressed.
What is your client asking from you? It seems unlikely that they're asking for losslessly compressed file for delivery. Are they asking for something for playback? What are their delivery specifications?

HT201272 hi all, I am having trouble downloading 2 music videos. I keep getting the download error 8008. Can anyone enlighten me on how to work around the problem.

Hi guys, I'm havinh trouble downloading 2 music videos. The download starts then stops before it gets going and gives me an error code, 8008. Can anyone help please.

Try the troubleshooting for that error number on this page : http://support.apple.com/kb/TS3297
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while accessing iTunes Store:
See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
Windows Vista:  \Users\username\Music\iTunes\iTunes Media\Downloads\
Windows 7:  \Users\username\My Music\iTunes\iTunes Media\Downloads\
Windows XP:  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
If you encounter this issue while while downloading Digital Copies using Windows:
Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.

I am using imovie 06, but i am having trouble exporting my video as a quicktime file

I have tried changing the settings numerous times, but when i try and export the movie as a good quality one only part of it plays.
The first bit of video plays but it freezes until the end on one clip while the audio carries on.
I would appreciate any help any one can give me as the film is for a uni assesment and needs to be good quality.
I am so confused!

Hi
How are You going to Play it ?
• as a DVD
• from Mac
• as QT.mov on any other compute
• or what ?
Yours Bengt W

Having troubling exporting a quicktime video

Similar Messages

Maybe you are looking for