Having Various Problems With Several Sites ("sort by" for ex)
Note: these problems started recently without changing anything in FFox.
Examples:
HomeDepot.com: "sort by" feature stopped working. Also cannot change number of listing per page.
USPS.com: could not print shipping label. Instead of a PDF label popping up, I was prompted to save as or open with "com.usps.cns.web.pdf.labelgeneration servlet". USPS told me to remove everything after ".pdf"
Another site (can't remember which): after filling out a form, pressing "submit" did nothing.
So I:
Turned off Adblock extension
Disabled NoScript extension
Updated JAVA to the latest version
Tested w/ Opera, same problem
Tested w/ IE, worked but now my hands feel dirty!
Restart FireFox in safemode which disables all addons/extensions so you can enable one by one until it reoccurs allowing you to isolate the problem.
[[How to start Firefox in Safe Mode]]
[[Safe Mode]]
Similar Messages
-
Having some problems with JAVA sites with safari, opera and firefox
I work with some online java application for my work. Since I updated to Leopard, I cant access the site with safari, I loose some options with Opera and Firefox...
Is it the JAVA that is not up to date with leopard?
Any updates soon?
Help!!!I have experienced memory leaks with the jvm on Leopard. Seem they took a huge step backwards instead of forward.
It should be obvious by now that they didn't include 1.6 as many publications alluded to (Still haven't seen any explicit word from Apple where they officially said "Yes, Leopard WILL have JVM 1.6 at time of launch".)
Don't know if the url below will get filtered out, but many other (non-Apple controlled) forums have been saying nasty things about Apple not explaining themselves for this major snafu.
The article is titled, "So Long Apple. The Party's Over" and hosted by Java Lobby dot org.
http://www.javalobby.org/java/forums/t102936.html -
I am trying to figure out why this interface never works like it should, I have the lastest drivers 10.8 OS, The firewire cuts in an out and then crahses my computer, it was working fine for a good month, and then it does this. The people at Focusrite are clueless to what is going on. This is horrible engenerring on there part. There are three lights on the interface they all light up, then half way through a recording or just lisiting to music, the FW light flashes and cuts out, and now the mac is rebooting when it does that. I highly doubt it is a simple fix, or a bad wire. I have the original cable for the interface that came with it, hooked up to a sonet adapter to fit in the macbook pro because the geniuses at apple decided that they would make that port small.
Sorry about mispeling its 3 am here in Ohio. Please can someone help
Thank youHello Bagpus113
Check out the article below to troubleshooting issues with the sound for music and for videos. One other thing you can try is to convert the songs to a different format
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
iTunes: How to convert a song to a different file format
http://support.apple.com/kb/ht1550
Regards,
-Norm G. -
I'm having a problem with using an external drive for my iTunes media
I recently switched to using an external drive for my iTunes library and I was able to switch everything fine. I was able to get iTunes to download and new TV shows, videos, and music that I purchased from the iTunes store to the iTunes folder on my external drive but I can't get it to do the same for applications. All my applications are still being used through the iTunes folder on my internal drive and new ones that I download get put in that folder too. How can I set it to get iTunes to put new applications and use the existing application files from my external drive?
There is a Windows based utility that will allow one to change the location of the 'My Music' folder, but you appear to be running a Mac.
You may find more appropriate help in the iTunes for Mac Discussions.
If you are running Windows, post back and some info can be provided.
Best of Luck -
Having serious problems with DPS
So I posted earlier and had few reponses, but the problem has now escalated into something even more frustrating and problematic.
Before, I was having issues where updated articles would not show us updated in the slide out and drop down contents. This is still a problem. I have done everything to try and correct this from deleting and reuploading the article, to archive/redownload, and the only thing that has worked is starting a new folio which I think is rediculous. I have a 300mb file with over 40 articles, to have to make another folio would be absurd....anyone know how to fix this?
NOW however, I'm having further problems with formatting and effects. For example, when I preview my folio on the iPad, I have two articles which have outer glows, even though they are not present in the actual document. I have deleted and reuped the document and article and.same as above and nothing. Even after archiving and redownloading the folio (300 mb folio which again is becoming rediculous) the portrait version got rid of the outer glow, but the landscape version still has an outer glow.
Anyone know why this would be happening and how to fix it? I haven't had a problem until yesterday. I have done everything including reset my iPad and it has not helped.Have you verified that you've updated the article in Folio Builder Panel? Make sure to save the portrait and landscape versions of your InDesign document and then select the article in FBP and say update. Also, check and make sure you aren't accidentally looking at a folio that's been fully published (no blue stripe in the library). If you're looking at a published folio you also have to remember to go to Folio Producer and click update so the updates are pushed to the production servers.
Neil -
I am having a problem with email. I can receive and send, but when I delete, the deleted messages return into either Trash or Bin or both whether or not I have deleted them from my PC.
The only way I can get rid of them permanently, is to go into my area of my providers site(Sky) and empty all of the boxes there. I imagine it's a setting, please advise.For IMAP mail only.
Settings>Mail, Contacts, Calendars>tap on mail account>Archieve Messages>OFF -
I am having major problems with Firefox. About 3 weeks ago I started experiencing the display only when on Firefox for all web site, that the display would be shifted right about half a screen. It only happens on Firefox and happens for all web sites.
This issue can be caused by the Babylon Toolbar 1.1.8 extension
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Having multiple problems with script - NTFS Permissions and AD Groups
Hi, all! I'm having multiple problems with my first script I've written with Powershell. The script below does the following:
1. Prompts the user for a corporate division under which a shared folder will be created, and adjusts variables accordingly.
2. Prompts if the folder will be a global folder or an office/location-specific folder, and makes appropriate adjustments to variables.
3. If a global folder, prompts for the name. If an office/location-specific folder, prompts for each component of the street address, city and state and an optional modifier. I've prompted for this information in this way because the information
is used differently later on in the script.
4. Verifies the entered information and requests confirmation to proceed.
5. Creates the folder.
6. Creates an AD OU and/or security group(s).
7. Applies appropriate security groups to the new folder and removes undesired permissions.
Import-Module ActiveDirectory
$Division = ""
$DivAbbr = ""
$OU = ""
$OUDrive = "AD:\"
$FolderName = ""
$OUName = ""
$GroupName = ""
$OURoot = "ou=DFS Restructure Testing OU,ou=Pennsylvania Camp Hill 4410 Industrial Park Rd,ou=Locations,ou=Camp Hill,dc=jacobsonco,DC=com"
$FSRoot = "E:\"
$FolderPath = ""
$DefaultFolders = "Archive","Customer Service","Equipment","Inbounds","Management","Outbounds","Processes","Projects","Quality","Reports","Returns","Safety","Schedules","Time Keeping","Training"
[bool]$Location = 0
do {
$userInput = Read-Host "Enter CLS Division: (W)arehousing, (S)taffing, or (P)ackaging"
Switch ($userInput)
W {$Division = "Warehousing"; $DivAbbr = "WHSE"; $OU = "ou=Warehousing,"; break}
S {"Staffing is not yet implemented."; break}
P {"Packaging is not yet implemented."; break}
default {"Invalid choice. Please re-enter."; break}
while ($DivAbbr -eq "")
write-host ""
write-host ($Division + " was selected.")
$FolderPath = $Division + "\"
write-host ""
$choice = ""
do {
$choice = Read-Host "Will this be a (G)lobal folder or (L)ocation folder?"
Switch ($choice)
G {$Location = $false; break}
L {$Location = $true; $FolderPath = $FolderPath + "Locations\"; $OU = "ou=Locations," + $OU; break}
default {"Invalid choice. Please re-enter."; $choice = ""; break}
while ($choice -eq "")
write-host ""
write-host ("Location is set to: " + $Location)
write-host ""
if ($Location -eq $false) {
$FolderName = Read-Host "Please enter folder name:"
$GroupName = $DivAbbr + " " + $FolderName
} else {
$input = Read-Host "Please enter two-letter state abbreviation:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter city:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter street address number only:"
$FolderName = $FolderName + $input
$GroupName = $DivAbbr + " " + $FolderName
$FolderName = $FolderName + " "
$input = Read-Host "Please enter street name:"
$FolderName = $FolderName + $input
$input = Read-Host "Please enter any optional information to appear in folder name:"
if ($input -ne "") {
$FolderName = $FolderName + " " + $input
$OUName = $FolderName
write-host
write-host "Path for folder: "$FSRoot$FolderPath$FolderName
write-host "AD Path: "$OUDrive$OU$OURoot
write-host "New OU Name: "$OUName
write-host -NoNewLine "New Security Group names: "$GroupName
if ($Location -eq $true) { write-host " and "$GroupName" MGMT" }
write-host
$input = Read-Host "Please confirm creation of new site/folder: (Y/N) "
if ($input -ne "Y") { Exit }
write-host
write-host -NoNewLine "Folder exists: "; Test-Path ($FSRoot + $FolderPath + $FolderName)
if (Test-Path ($FSRoot + $FolderPath + $FolderName)) {
Write-Host "Folder already exists! Skipping folder creation..."
} else {
write-host "Folder does not exist. Creating..."
new-item -path ($FSRoot + $FolderPath) -name $FolderName -itemtype directory
Set-Location ($FSRoot + $FolderPath + $FolderName)
if ($Location -eq $true) {
$tempOUName = "ou=" + $OUName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "OU exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "OU already exists! Skipping OU creation..."
} else {
write-host "OU does not exist. Creating..."
New-ADOrganizationalUnit -Name $OUName -Path ($OU + $OURoot) -ProtectedFromAccidentalDeletion $false
$GroupNameMGMT = $GroupName + " MGMT"
if (!(Test-Path ($OUDrive + "CN=" + $GroupName + "," + $tempOUName + $OU + $OURoot))) { write-host "Normal user group does not exist. Creating..."; New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
if (!(Test-Path ($OUDrive + "CN=" + $GroupNameMGMT + "," + $tempOUName + $OU + $OURoot))) { write-host "Management user group does not exist. Creating..."; New-ADGroup -Name $GroupNameMGMT -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
# $FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
write-host $BIUsersSID.Value
# out-string -inputObject $BIUsers
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$objUser = New-Object System.Security.Principal.NTAccount($ADGroupName)
$objUser.Translate([System.Security.Principal.SecurityIdentifier]).Value
write-host $ADGroupName
write-host $objUser.Value
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
$ADGroupName = "JACOBSON\" + $GroupNameMGMT
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
} else {
$tempOUName = "cn=" + $GroupName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "Group exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "Security group already exists! Skipping new security group creation..."
} else {
write-host "Security group does not exist. Creating..."
New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ($OU + $OURoot)
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$FolderACL.SetAccessRuleProtection($True,$True)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"Modify","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
My problems right now are in the assignment/removal of security groups on the newly-created folder, and the problems are two-fold. Yes, I am running this script as an Administrator.
First, I am unable to remove the BUILTIN\Users group from the folder when this is an office/location-specific folder. I've tried to remove the group in several different ways, and none are having any effect. Oddly, if I type in the lines directly
into Powershell, they work as expected. I've tried the following methods:
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
In the first case, the script goes through and has no apparent effect because afterwards, I do a get-acl and the BUILTIN\Users group is still there, although when looking through the GUI, inheritance appears to have been broken from the parent folder.
In the second case, I get the following error message:
Exception calling "RemoveAccessRuleAll" with "1" argument(s): "Some or all identity references could not be translated."
At C:\Users\tesdallb\Documents\FileServerBuild.ps1:110 char:5
+ $FolderACL.RemoveAccessRuleAll($Ar)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : IdentityNotMappedException
This seems strange that the local server is unable to translate the SID of a BUILTIN account. I've also tried explicitly putting in the BUILTIN\Users SID in place of the variable in the New-Object line, but that gives me the same error. I've
also tried the solutions given in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ad59dc58-1360-4652-ae09-2cd4273cbd4f/remove-acl-issue?forum=winserverpowershell and at this URL:
http://technet.microsoft.com/en-us/library/ff730951.aspx but these solutions also failed to have any effect.
My second problem is when I try to apply the newly-created security groups, I also will get the "Some or all identity references could not be translated." I thought I had found a workaround to the problem by adding the -PassThru option to
the New-ADGroup commands, because it would output the SID of the group after creation, however a few lines later, the server is unable to translate the account to apply the security groups to the folder.
My first Powershell script has been working well up to this point and now I seem to have hit a showstopper. Any help is appreciated.
Thanks!I was hoping to stay with strictly Powershell, but unless I can find a Powershell solution, I may resort to ICACLS.
As for the problems with my groups not being translatable right after creating them, I think I have solved this problem by using the -Server parameter on all my New-ADGroup commands and this example code seems to have gotten around the translation problem,
again utilizing the -Server parameter on the Get-ADGroup command:
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
# Add the new normal users group to the folder with Read and Execute permissions
$GroupSID = Get-ADGroup -Identity $GroupName -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
# Add the management users group to the folder with Modify permissions
$GroupMGMTSID = Get-ADGroup -Identity $GroupNameMGMT -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupMGMTSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
Going this route seems to ensure that the Domain Controller I'm creating my groups on is the same one that I'm querying for the group's SID to use in the FileSystemAccessRule. It's been working fairly consistently.
Still having issues with the translation of the BUILTIN\Users group, though. -
I had a quick links bar that contained several of my daily sites. Today I opened Firefox and that bar is no longer there. I have tried to find it under the "View" tab but nothing exists. Where did it go and how do I bring it back?
== This happened ==
Just once or twice
== todayHello Christian.
If it was the Bookmarks toolbar and it's no longer visible, you can make it visible by going into ''View > Toolbars > Bookmarks Toolbar''.
If the Bookmarks toolbar is visible but no bookmarks are displayed, go into ''Bookmarks > Bookmarks Toolbar'' and see if there's anything inside it. If there is, go into ''View > Toolbars > Customize... > Restore default set'', to restore your interface buttons to their default postion. If there is nothing inside ''Bookmarks > Bookmarks Toolbar'', something deleted what was inside it. You should be able to restore your bookmarks by going into ''Bookmarks > Organize Bookmarks... > Import and Backup > Restore''.
If none of this helps, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author. -
Having connection problems with Mail after installing 10.9.4
I upgraded to 10.9.4 a few days ago, and ever since, I've been having connection problems with Mail. First, it stops downloading new mail automatically and second, it won't send any of my messages. When I try to send, I get a message that it is unable to connect.
Quitting Mail and restarting it seems to clear the problem, but then it happens again, maybe an hour or two later.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should look and B is what happens after I have I opened several tabs. I can get it back to normal if I click on VIEW than click on customize. When the customize window appears FireFox returns to its normal state. I than click on the done box and go back to what I have been doing. I tried resetting FireFox back to default settings, but that did not correct the problem.
This began happening about a month ago. Is there a way I can fix this problem? Thanks for your help.I don't know how to attach my 2 attachments that shows the problem I am having.
[email address removed to protect your privacy and security]
<! [email protected] -->I found the images here: https://support.mozilla.org/en-US/questions/977542#answer-501598
-
Hi everyone,
I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanksThose are not viruses. You have probably installed some malware:
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware. -
I am having a problem with Windows Fusion installed on a MacBook.
I am having a problem with Windows Fusion installed on a MacBook OS 10. When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
Any help would be greatly appreciated.
Thank you very much.HartEJ wrote:
...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them. -
I am having major problems with my track pad on my macbook pro. Even though my settings haven't changed...my trackpad is no longer responding as it did before. The left hand corner no longer clicks when I press it and my personal commands which I set up in preferences no longer seem to be workin. Please help!
Some websites have an internal mute or volume setting. If that's not the issue, see below.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
Delete All Site Data and Settings
then click Delete Data. Close the preference pane. -
Im haveing a problem with google map in my adobe edge web page file project
ok iv set my google map for a certain address in adobe edge however when I load the file in a internet browser the map is scrolled further away from the address and marker that is placed on the address.
the problem is that when I load the page the map is not on target it looks like this
the map should look like this
here is the link to download the site project files
https://www.dropbox.com/s/5mtq1medqd1bh5w/storewebsite2.zip
Also im having this problem with it it when I load the map its on target when I place this code in a trigger on the timeline
var container = sym.$("container");
var map = '<iframe width="'+container.width()+'" height="'+container.height()+'" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" src="https://maps.google.com/maps?f=q&source=s_q&hl=en&geocode=&q=7120+Boul +St+Laurent,+Montreal,+QC,+Canada&aq=0&oq=7120+boul+st&sll=45.534114, - 73.617124&sspn=0.006907,0.016512&ie=UTF8&hq=&hnear=7120+Boulevard+Sai n t-Laurent,+Montr%C3%A9al,+Communaut%C3%A9-Urbaine-de-Montr%C3%A9al,+Q u %C3%A9bec+H2S,+Canada&t=m&z=14&ll=45.534114,-73.617124&output=embed"></iframe><br /><small><a href="https://maps.google.com/maps?f=q&source=embed&hl=en&geocode=&q=7120+Bo ul+St+Laurent,+Montreal,+QC,+Canada&aq=0&oq=7120+boul+st&sll=45.53411 4 ,-73.617124&sspn=0.006907,0.016512&ie=UTF8&hq=&hnear=7120+Boulevard+S a int-Laurent,+Montr%C3%A9al,+Communaut%C3%A9-Urbaine-de-Montr%C3%A9al, + Qu%C3%A9bec+H2S,+Canada&t=m&z=14&ll=45.534114,-73.617124" style="color:#0000FF;text-align:left">View Larger Map</a></small>'
container.html(map)
however when I place the code in creationcomplete it plays the google map off target to a different address. Any ideasPlease correct your download file - it will not open/unzip - it says it is currupted or damaged.
D
Maybe you are looking for
-
How to Connect Airport Express to Existing Wireless Network (Client Mode)
I am posting this for everyone tearing their hair out trying to connect the Airport Express to your own existing home wireless network. After spending 2 hours last night installing this on my father-in-law's home network, I hope to be able to save so
-
The error message is appearing where the auto-complete options should be appearing
-
I cannot turn up the volume during a phone call
My "+" button on the side of my phone is broken and I cannot turn up the volume during a phone call. Is there any other way to control the volume during phone calls?
-
Integration (CIF) of dependend demands to APO without planned orders?
Hi, is there any way we can integrate dependent demands for the components generated by planned and/or process orders without integrating the final products and planned / process orders? The reason is that we are forecasting on component level only i
-
Source System mapping while transporting objects from Q to P
Hi All, I have moved all my transports from BW DEV to Q twice with different source system mappings, say R3D to R3Q and again R3D to R3X, as I have to do testing from both the source systems. Now, I have to move all those transports to PROD and I fou