Haw much time needed to transfer data from one mac to another throughout FireWire

It has been 15 hours since I started transferring data from my old mac to my new one and I cant get throughout the process any tip about the estimated time the amount of data in GB is around 200

That does seem too long for a 200GB transfer, even via FireWire 400. I suspect there's a problem on one of the hard drives that is preventing some data from being read or written successfully. I would cancel the copy process and use Disk Utility to run its Repair Disk routine on each of the drives.

Similar Messages

What is the quickest way to transfer data from one Mac to another?

I just bought a Macbook Air, and using the Migration Assitant, it says that it will take 32 hours to transfer data from my old Macbook to the Macbook Air.
There must be a quicker way! What happens if I abort?

Unless you can use Thunderbolt Target Disk Mode, the fastest means is to use a Time Machine backup from an external drive, using the quickest port you have compatible with that drive.
However, I would NEVER, ever use Migration Asssistant for a new Mac from an old one. Setup Assistant is exponentially better, even if you have to start over.
Read this.
http://pondini.org/OSX/Setup.html

Transfer data from one database to another without identities but keep the relation b/w PK and Foreign key

Hi,
I need to transfer data from one database to another database (both are identical databases).
1. Not transferring identity columns (primary keys). the destination table might have the same key.
2. keep the PK's and FK's relation b/w parent and child table
3. I have 4 levels
Example: tableA (col1 int identity(1,1) , col2, col3)
tableB (col1 int identity(1,1) ,
col2 , col3) -- col2 has the foreign key relation with tableA.col1
tableC (col1 int identity(1,1) ,
col2, col3) -- col2 has the foreign key relation with tableB.col1
tableD (col1 int identity(1,1) , col2, col3) -- col2 has the foreign key relation with tableC.col1
please advise me.
Thanks in advance

Try the below:
/********************************SAMPLE TARGET***************************************************************/
Use MSDNSamples
create table TableA(LevelValueId int identity(1,1) primary key, name varchar(100))
Insert into TableA(name) Select 'R1'
Insert into TableA(name) Select 'R2'
create Table TableB(ChildId int identity(100,1),name varchar(100), LevelValueID int references TableA(LevelValueId))
Insert into TableB(name,LevelValueID) Select 'Childname1',1
/********************************SAMPLE TARGET***************************************************************/
/********************************SAMPLE SOURCE***************************************************************/
Use Sample
create table TableA(LevelValueId int identity(1,1) primary key, name varchar(100))
Insert into TableA(name) Select 'C1'
Insert into TableA(name) Select 'C2'
create Table TableB(ChildId int identity(100,1),name varchar(100), LevelValueID int references TableA(LevelValueId))
Insert into TableB(name,LevelValueID) Select 'Kidname1',1
/********************************SAMPLE SOURCE***************************************************************/
USe MSDNSamples
/********************************MIGRATION INTERMEDIATE TABLE***************************************************************/
--Migration table
Create table Mg_TableA(LevelValueId int, NewValueId int)
/********************************MIGRATION INTERMEDIATE TABLE***************************************************************/
/********************************ACTUAL MIGRATION FOR MASTER TABLE***************************************************************/
MERGE INTO TableA
USING sample.dbo.TableA AS tv
ON 1 = 0
WHEN NOT MATCHED THEN
INSERT(name) Values(tv.name)
Output tv.levelValueId ,inserted.LevelValueid INTO
Mg_TableA;
/********************************ACTUAL MIGRATION FOR MASTER TABLE***************************************************************/
/********************************ACTUAL MIGRATION FOR CHILD TABLE***************************************************************/
Insert into TableB (name,LevelValueID)
Select A.name,B.NewValueId From sample.dbo.TableB A
Inner join Mg_TableA B on A.LevelValueID = B.LevelValueId
/********************************ACTUAL MIGRATION FOR CHILD TABLE***************************************************************/
/********************************TEST THE VALUES***************************************************************/
Select * From TableA
Select * From Mg_TableA
Select * From TableB
/********************************TEST THE VALUES***************************************************************/
Drop table TableB,Tablea,Mg_TableA
Use Sample
Drop Table TableB,Tablea

How do I transfer data from one iPhone to another?

How do I transfer data from one iPhone to another?

If your old device is an Apple using iOS 5 or later, and you have an iCloud account, you can transfer all your saved messages, email accounts, photos, notes, and other personal settings to your new iPhone.
Here's how...
Connect your old Apple device to WiFi and to a power source.
Back it up to iCloud by going to Settings > iCloud > Storage & Backup and toggling iCloud Backup on. The time it takes to ba ckup depends on how much data you have and on the speed of your internet connection.
iCloud backs up your device once a day. If it needs backing up before you transfer to your new iPhone 5, tap Back Up Now in Settings > iCloud > Storage & Backup. Do not start transferring before the backup is finished.
Turn on your new iPhone and complete the setup by selecting your language and country, and choose whether to enable Location Services. When prompted, choose your WiFi network.
When prompted to set up, choose Restore from iCloud Backup, tap Next, and enter your Apple ID and password.
Select the backup of your old device and tap Restore. Wait until the device has finished restoring from the backup.
When the restore process is complete, your iPhone will restart and be ready to use.
Connect your iPhone 5 to iTunes to sync data not contained in the backup (such as music, videos, apps, and so on). You can choose the data that are synced by clicking the syncing tabs in iTunes.

How can you transfer data from one ipod to another ?

How can you transfer data from one ipod to another ipod ?

The geniusbar told me what to do, I understood but there is still a problem for me >:/ It's not showing up though. Like "device." Nothing is happening, and I tried as soon as I got home. Then after half an hour, then an hour, then 3 hours. My problem is that it's not showing up! It's stuck in recovery mode! There's still like 25% battery. So I have no idea why.

How to transfer data from one macbookpro to another

how to you transfer data from one macbookpro to another. the other one was stolen.

If your computer was stolen and you don't have a data backup, you can't transfer data from the stolen computer to your new one. If you have a data backup, restore the data to the new computer.

How to transfer DATA from one machine to another using DBlink

I want to transfer data from one machine to another both having oracle 8.0.5 with AIX operating system using DB link. CAn any one help me in this task

Step one - Create and test SQLNet connections between the databases.
Step two - Create at least on database like from one database to the other:
CREATE DATABASE LINK linkname
CONNECT TO user identified by password
USING 'tnsnamesentry';
Step three - use the dblink linkname in dml statements eg:
insert into emp@linkname
(select * from emp);

How to transfer data from one system to another by datamart please give de

how to transfer data from one system to another by datamart please give details

Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK.

Different ways to Transfer data from one database to another database

Hi all,
What are the ways to transfer data from one database to another database. With the following options, i Can transfer data as far as i know. Please
correct me if i am wrong or tell me if there is any other options are available.
1) Create database link/connection string and using this string and COPY command, we can transfer data.
2) By using Export and Import utilities.
I told first one to my interviewer, he told, its strange, by using, COPY command also can we transfer data ? As far as i know, we can transfer data. Am i right ?
Thanks in advance,
Pal

transfer data from one database to another database.You mean store the data of one to another?
1) Create database link/connection string and using this string and COPY command, we can transfer data.every SELECT on a DB-link is transfering data. And you can have all kind of transfers and store on the e.g CTAS of materialized views or.... the SQL*PLUS COPY :
The COPY command is not being enhanced to handle datatypes or features introduced with, or after Oracle8i. The COPY command is likely to be made obsolete in a future release.
But there are many others. Check for ORACLE Streams, and the "COPY" your interviewer was mentioning is about the operating file system COPY right? That's transportable tablespaces.
http://download.oracle.com/docs/cd/E11882_01/server.112/e17120/tspaces013.htm#ADMIN11403
-- andy

Can I use flash drives to transfer data from one MBP to another at a differ

I've looked and cannot find any info on the use of flash drives. Can I use a flash drive to transfer data from one MBP to another one at a different location? (ie; school Apple and home MBP) Grade tests and papers at home, enter data into home computer, then put it on flash drive and carry flash drive to school, transferring data to school desk top? Are certain flash drives preferrable over others, name brands, size, etc?

Yep, you sure can. Just about any drive will work as mentioned above. But I'm partial to SanDisk and PNY. I've used both and they work great! Currently I carry both a 2GB SanDisk Micro Cruzer and a retractable 2GB SanDisk Cruzer, both really nice. Replaced my oldie but goodie 256MB PNY drive that I've been using since they first came out.

How to transfer Signatures from one Mac to another

In Mail, if I go to Preferences > Signatures, I see in the left column *All Signatures*, and signatures for various accounts.
How would I transfer the signatures in *All Signatures* from one Mac to another?
The names of files in the folder ~/Library/Mail/Signatures are all cryptic.
Moreover, since each signature is tied to a certain account, I don't think that I can just copy these files into the Signature folder of the 2nd Mac.

Simply moving these cryptic files did not work, in the sense that these signatures did not show up in the right-most column of the Signatures pane.
I made sure that I did not move the SignaturesByAccount.plist file in the ~/Library/Mail/Signatures folder.
So, would someone please share with me how to transfer signatures from one Mac to another, with both running Mail?

Need to transfer data from one external hd to another hd

Hi, I need to transfer movies from one external hd to another external hd - destination hd is formatted currently as NTSC, source hd is formatted currently as Mac OSx extended (journalled).
I believe I need to transfer data across to different hd before I can reformat source hd to MSDOS - fat. Then after reformatting source hd I want to transfer data back from destination hd to source hd, to allow this to be viewed on TV & PC...
I have tried copying & dragging from one to another, doesn't work (on desktop, or in Finder).
Any help welcome, thank you.

When you reformat a drive it erases all data. You'll need to buy a second external drive.
Note: you can reformat a single partition on a drive. More info
I like the Seagate USB 3.0 Backup plus drives. Works on USB 2.0 ports. They come formatted for PC but easy to format in Disk Utility.
I don't recommend Western Digital because of the boot problem with some of their drives. LaCie makes good drives. All Mac formatted drives will cost more and it’s easy to reformat with Disk Utility. Do not use the software that comes with the drives. It’s recommended that you use Apple’s Disk Utility.
Prices vary but this gives you an idea of what you’ll find. As you notice the second and third TB is usually only $15 more per TB. It's not uncommon to find a 1T is more than the 2T
Current Amazon pricing:
Seagate Backup Plus 1 TB USB 3.0 $154.85 (used to be around $85.00)
Seagate Backup Plus 2 TB USB 3.0 $114.95 (used to be around $99.00
Seagate Backup Plus 3 TB USB 3.0 $129.90 (used to be around $115.00)
Locally, Best Buy seems to have the best prices.
Occassionally you'll find the 3T for $99 on sale.

Transfer data from one DATASET to another DATASET

Hi,
Is there a way to transfer the data from one DATASET to another DATASET?
I tried the following
OPEN DATASET DS1 FOR OUTPUT IN TEXT MODE ENCODING DEFAULT .
OPEN DATASET DS2 FOR INPUT IN TEXT MODE ENCODING DEFAULT .
TRANSFER DS2 to DS1.
CLOSE DATASET DS1.
CLOSE DATASET DS2.
But it does not work.
Thanks in advance.

Hi Jason,
This logic transfers data from one dataset to another....Kindly check..
DATA fname(60) VALUE 'myfile'.
DATA fname2(60) VALUE 'myfile1'.
TYPES: BEGIN OF line,
         col1 TYPE i,
         col2 TYPE i,
       END OF line.
TYPES itab TYPE line OCCURS 10.
DATA: lin TYPE line,
      tab TYPE itab.
DO 5 TIMES.
lin-col1 = sy-index.
lin-col2 = sy-index ** 2.
APPEND lin TO tab.
ENDDO.
"writing data to file fname.
OPEN DATASET fname FOR OUTPUT IN BINARY MODE.
LOOP AT tab INTO lin.
TRANSFER lin TO fname.
ENDLOOP.
CLOSE DATASET fname.
"reading data from fname and writing to fname1.
OPEN DATASET fname2 FOR OUTPUT IN BINARY MODE.
OPEN DATASET fname FOR INPUT IN BINARY MODE.
DO.
READ DATASET fname INTO lin.
IF sy-subrc <> 0.
    EXIT.
ELSE.
    TRANSFER lin TO fname2.
ENDIF.
ENDDO.
CLOSE DATASET fname.
CLOSE DATASET fname2.
"displaying data from fname2.
OPEN DATASET fname2 FOR INPUT IN BINARY MODE.
CLEAR lin.
DO.
READ DATASET fname2 INTO lin.
IF sy-subrc NE 0.
    EXIT.
ENDIF.
WRITE:/ lin-col1, lin-col2.
ENDDO.
CLOSE DATASET fname2.
Mdi.Deeba
Edited by: Mdi.Deeba on Feb 17, 2009 8:11 AM

Is there any mechanism available to transfer data from one AQ to another AQ

Hi All,
Is there any way , any api's available or any other real time mechanism available to transfer/move the data from one AQ to another AQ..
Is this possible..could someone please advise/help us regards this..
Thanks
sachin.

I dont think there is a standard business content datasource to extract data from NAST table. If you are going to use this data in some other LO modules based on the requirement enhance the datasource and append fields and write code to populate the message types.
If you are going to use this as stand alone data, then you can go ahead and create a generic datasource based on table.

How do i transfer files from one mac to another?

how do i transfer my files from one mac to another mac?

I normally use an External Hard Drive or Flash Drive for moving files from both Mac's and PC's, but if you want to move from an old Mac to a new one see > How to use Migration Assistant to transfer files from another Mac

Haw much time needed to transfer data from one mac to another throughout FireWire

Similar Messages

Maybe you are looking for