HBA card suitable for HP ProLiant DL380G7 Server

Hello, please i need the part number of a suitable HBA card preferrably 8GB double port for HP Proliant DL380G7 server to connect fibre cables

Hi:
You may also want to post your question on the HP Business Support Forum -- DL Servers section.
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.U3N63elOW9I

Similar Messages

Windows OS required for hp proliant ml10 server machine

Dear / Sir
I planned to buy a new server machine which is a hp proliant ml10
so my query is whch operating systems i can legally install on it.
any legel windows operating systems or only windows server edidtion.
Thanking you
nitin

Hi,
You can found your server model is certificated with Windows Server or not in Windows Server Catalog website:
ProLiant ML10
by Hewlett-Packard Company
Compatible with the following versions of Microsoft Windows
Windows Server 2012 R2 x64
Certified for Windows
Windows Server 2012 x64
Certified for Windows
Windows Server 2008 R2 x64
Certified for Windows
Windows Server 2008 x64
Certified for Windows
But the ProlLiant
ML10 have many extension model, personal advice is you can ask your hardware vendor for the further help.
The related third party information:
HP ProLiant ML10 Server
http://www8.hp.com/us/en/products/proliant-servers/product-detail.html?oid=5390723#!tab%3Dmodels
More information:
Windows Server Catalog
http://www.windowsservercatalog.com/item.aspx?idItem=3d94ac2f-058b-25af-7225-f6119e3c25f9&bCatID=1282
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HBA Card is not detecting in m4000 server

Hi,
hba is not detecting in M 4000 server. Any one plz help me.
Thanks & Regards,
Venkata Siva

Hi.
You not write what type/vendor new HBA.
You not write what you do for detect new HBA and what means new HBA not detected.
I hope you create */reconfigure* before install new HBA or make boot -r
Regards.

CF card suitable for Readyboost?

I am using a T61 and have bought an 8G Sandisk Extreeme III mounted with a KODAK PCMCIA adapter. Is ther any chance of getting this to work as a readyboost storage device. I was hoping to partition it to allow the second 4G to be a TrueCript volume. So plan is not going well so far. Device is not recognised for readyboost use possibly due to the adapter rather then the card and I can't find a way to partition the card. I know that SD card works but I want to resurve that slot for my phone card. Any ideas?

If you have a high resolution camera, this is the only reader to have. I use it with my Canon 30D and it is extremely fast. Comes with two cables, one firewire 800, and a firewire 400 cable.
"http://www.sandisk.com/Products/Item(2015)-SDDRX4-CF-901-SanDiskExtreme_FireWireReader.aspx"
Seems that any links coming from SanDisk don't agree with these forums, just copy and paste.
Message was edited by: Mike Van Sande
Message was edited by: Mike Van Sande

Unable to enable HBA Card in the Cisco UCS c22 m3 server

Hi All,
I need your help desperately to setup the cisco ucs c22 m3 server in our environment. We have a C22 M3 server and I did the basic config of CIMC and we have a LSI megaraid controller connected to one of the PCIe and the other PCIe has a dual port 8gb HBA card. We installed the RAID and we can see the LSI Megaraid controller. But I cannot see the HBA card and there is noo light near the card. I hope I need to enable something so that the card should work. I tried enabling in the BIOS menu I can see the PCIe slot is enabled but I am unable to see the HBA functioning. Couldyou pleasehelp me to resolve this.

Dear Manuel,
Thanks for replying me. See the answers for your queries.
What kind of HBA card are you trying to use?
If I am not wrong we are using "Qlogic QLE2562, 8Gb dual port Fibre Channel HBA".
How many CPUs do you have installed on your server?
I opened the box and saw only 1 CPU installed. But the solution is given by CISCO pre sales. We have 2 PCIe slots configured. One for LSI RAID controller and the other with dual port Fibre Channel HBA.
Awaiting your reply.
Thanks and Regards,
Jaffer Ali

Finding firmware version for HBA card

Does anybody knows a command in solaris 9 to display firmware version for HBA cards or other pci cards currently in system

I've not heard of a way of reading add-on card firmware levels from the OBP...
However, you might be lucky insofar that the firmware levels get displayed at boot time. Emulex cards always do this as one of the very first things that pass on the screen after powering up.

Do we require HBA card for single instance database.

Hi All,
I have doubt that we are going to implement a single instance with ASM.
Db version will 11gR2 as it is asm. My concern HBA is required for single instance oracle database.
Please suggest.
Thanks and Regards,

The question is : do you want your user to be able ti use their application offline ?
If yes, then you may provide them a local database and use a JDBC type4 driver. (The application is fetch directly from the server when first connected and then is able to lauch the applicaiton off-line) Such a network listen is allowed by the JNLP security model without any application sign !
If no, then why not having a single database and some user debedant table that store the user specific data (as usual), and using a login dialog-bon (or an auto-logon mechanism) to restric identify and access your database thru some business logic via RMI or any ligh-webservice technology.
Anyway you have plenty of solutions ..... it only depends of what are the exact needs.
Regards,
Jean-Baptiste Bugeaud
WWW.UP2GO.NET - The JNLP Applications Repository

Which oracle software is suitable for Microsoft windows server 2003

Hi,
I'm suppose to install oracle 9i,10g on the system which i mentioned below.
Which oracle software is suitable for the system?
System:
Microsoft Windows Server 2003 R2
Standard x64 Edition
Service Pack 2
Computer:
Intel(R) Xenon CPU
E5335 @ 2.00Ghz
2.00Ghz, 2.00Gb of RAM
Waiting for your suggestion.
Thanks, Muhammed.

Thanks for your quick response.
As you said v11 can be installed and
Could you please say about the bit (32 or 64bit)? which oracle binaries i can download
because my system configuration is server 2003 - 64 is bit xeon process.
Many Thanks,
Muhammed

Ntpdate - no server suitable for synchronization found

Hi,
I am running Solaris 8; ntpdate 3-5.93e.
Running:
ntpdate -u -d server01
19 Jun 11:01:22 ntpdate[24907]: ntpdate 3-5.93e Mon Sep 20 15:45:30 PDT 1999 (1)
transmit(172.25.12.5)
transmit(172.25.12.5)
transmit(172.25.12.5)
transmit(172.25.12.5)
transmit(172.25.12.5)
server 172.25.12.5, port 123
stratum 0, precision 0, leap 00, trust 000
refid [0.0.0.0], delay 0.00000, dispersion 64.00000
transmitted 4, in filter 4
reference time: 00000000.00000000 Wed, Feb 6 2036 22:28:16.000
originate timestamp: 00000000.00000000 Wed, Feb 6 2036 22:28:16.000
transmit timestamp: c84164f5.3870e000 Mon, Jun 19 2006 11:01:25.220
filter delay: 0.00000 0.00000 0.00000 0.00000
0.00000 0.00000 0.00000 0.00000
filter offset: 0.000000 0.000000 0.000000 0.000000
0.000000 0.000000 0.000000 0.000000
delay 0.00000, dispersion 64.00000
offset 0.000000
19 Jun 11:01:26 ntpdate[24907]: no server suitable for synchronization found
Number of Interupted System Call - Err#4 EINTR error messages in truss report. when receiving SIGALRM #14 ( Generated by clock when alarm expires)
Any idea?
Thanks

Thanks Darren,
* The remote machine (server01) isn't running an NTP server
ps -eaf | grep ntp
root 13451 1 0 Jun 16 ? 0:03 /usr/lib/inet/xntpd
I checked and server01 is acting as the ntp server, comunicating and replying to client's requests:
snoop port 123
Using device /dev/bge0 (promiscuous mode)
client01 -> server01 NTP client (Tue Jun 20 08:14:53 2006)
serfver01 -> client01 NTP server (Tue Jun 20 08:14:16 2006)
server01 -> time.nrc.ca NTP client (Tue Jun 20 08:14:17 2006)
server01 -> time1.chu.nrc.ca NTP client (Tue Jun 20 08:14:17 2006)
client02 -> server01 NTP client (Tue Jun 20 08:16:19 2000)
server01 -> client02 NTP server (Tue Jun 20 08:14:24 2006)
* The remote machine is restricted and will not serve time to you
I am not sure what do you mean by remote machine (cleint or server machine); but they are all on the inside network and I am not aware of any kind restrictions?
* A firewall or other policy is intentionally dropping the packets
This might be true and an issue for server01 talking out to the Internet NTPserver
server01 -> time.nrc.ca NTP client (Tue Jun 20 08:14:17 2006)
server01 -> time1.chu.nrc.ca NTP client (Tue Jun 20 08:14:17 2006)
As you see **No response from the Internet Servers**;
Running ntpq -p on client01:
ntpq -p server01
remote refid st t when poll reach delay offset disp
======================================================== ntp.mcast.net 0.0.0.0 16 - - 64 0 0.00 0.000 16000.0
time.nrc.ca 0.0.0.0 16 - - 64 0 0.00 0.000 16000.0
time1.chu.nrc.c 0.0.0.0 16 - - 64 0 0.00 0.000 16000.0
Stratum for all of Internet NTP server is 16 which I don't think is good?
Temporary solution to set up server01 to be LOCAL, so that it can advertise itself as a server for ntpdate command, because it appears to act as a server for xntpd on the client side since it talks to clients.
* One or the other machine has a network problem dropping traffic
If you mean hardware problem, I checked log file no traces of loged problems.
Thanks

Right HBA Card for X4150

Hello all,
i have a little question:
is the following HBA Card supported by Oracle in a X4150 SUN Fire ?
http://www.oracle.com/us/products/servers-storage/storage/storage-networking/6gb-sas-pcie-hba-external-ds-186803.pdf

This card is only certified and supported for X4-4 and T5440 machines.
X4150 supported cards are listed there : https://support.oracle.com/handbook_private/Systems/SunFireX4150/components.html#SCSI

Severely problem with SUN HBA card SG-XPCI2FC-QF4 installation

Hello:
I'm facing a big problem when installation SUN HBA card,the machine can't recognise the HBA card when poweron with HBA installed,
my system is:
Server: SUN V890, Solaris 10
HBA: SG-XPCI2FC-QF4
I changed another HBA card and I/O solt,the problem again,
errors following:
This is the only error i got ,please help out,thanks.
/var/adm/messages:
Nov 9 01:21:51 N2000Primary genunix: [ID 936769 kern.info] mc-us35 is /memory-controller@5,400000
Nov 9 01:21:51 N2000Primary rootnex: [ID 349649 kern.info] mc-us36 at root: SAFARI 0x6 0x400000 ...
Nov 9 01:21:51 N2000Primary genunix: [ID 936769 kern.info] mc-us36 is /memory-controller@6,400000
Nov 9 01:21:51 N2000Primary rootnex: [ID 349649 kern.info] mc-us37 at root: SAFARI 0x7 0x400000 ...
Nov 9 01:21:51 N2000Primary genunix: [ID 936769 kern.info] mc-us37 is /memory-controller@7,400000
*Nov 9 01:21:51 N2000Primary pcicfg: [ID 756804 kern.warning] WARNING: failed to allocate 256 bytes for dev fibre-channel BASE register [0x10]*_
Nov 9 01:21:52 N2000Primary rootnex: [ID 349649 kern.info] pcisch3 at root: SAFARI 0x9 0x600000
Nov 9 01:21:52 N2000Primary genunix: [ID 936769 kern.info] pcisch3 is /pci@9,600000
Nov 9 01:21:52 N2000Primary pseudo: [ID 129642 kern.info] pseudo-device: dld0
Nov 9 01:21:52 N2000Primary genunix: [ID 936769 kern.info] dld0 is /pseudo/dld@0
Nov 9 01:21:52 N2000Primary ebus: [ID 521012 kern.info] su1 at ebus0: offset 1,3083f8
Nov 9 01:21:52 N2000Primary genunix: [ID 936769 kern.info] su1 is /pci@9,700000/ebus@1/rsc-console@1,3083f8
Nov 9 01:21:53 N2000Primary pcisch: [ID 370704 kern.info] PCI-device: usb@1,3, ohci0
Nov 9 01:21:53 N2000Primary genunix: [ID 936769 kern.info] ohci0 is /pci@9,700000/usb@1,3
Nov 9 01:21:53 N2000Primary unix: [ID 950921 kern.info] cpu7: UltraSPARC-IV (portid 7 impl 0x18 ver 0x31 clock 1350 MHz)
Nov 9 01:21:53 N2000Primary unix: [ID 950921 kern.info] cpu0: UltraSPARC-IV (portid 0 impl 0x18 ver 0

I see this reply is a little late, but just came upon it.
http://wikis.sun.com/display/PlatformIoSupport/Summit4Gb2PortFcQlogic
As you can see in the link above the SG-XPCI2FC-QF4 is not supported in the V890
JK

RAC Diagram: Where does HBA card fit in?

Version : 11g
I know that all nodes in a RAC configuration have an HBA card and that HBA is somehow connected to the Shared storage. In the following link, we can see that, through NIC meant for public IP, nodes connect to Shared storage.
http://www.akadia.com/services/ora_rac.html
So, where does HBA fit in the whole RAC set up?

GarryB wrote:
So, where does HBA fit in the whole RAC set up?At physical h/w and driver level.
For the public RAC network you use what? A network card (aka NIC) and a network driver.
An HBA is like a NIC. But instead of wiring into a network switch, it wires via fibre into a storage array switch (where the switch connects to a SAN). It also needs a driver.
Typically HBAs have dual fibre channel ports. This means that the kernel, via the driver, will see the very same storage device (aka LUN), twice. Once via the one port and then again via the second port.
A LUN will however have a unique identifier (called a <i>WWID</i>). A driver (typically Multipath on Linux, or Powerpath when using EMC) is used to create a logical device that Oracle CRS and ASM can use. It uses the WWIDs to determine the unique device (LUN) and then creates a single logical devices that "sits on top" of the physical devices that points to the very same LUN on the storage server.
So instead of the application layer having to deal with the complexities of mulltiple I/O paths to a LUN, this is done by the driver. The application layer simply uses the logical multipath device and the multipath driver does the rest.
So a HBA is pretty low down in RAC architecture - and RAC itself does not deal directly with it. Just like it does not deal directly with a NIC and its settings.
PS. As already mentioned, the URL you referred to uses IP as a storage protocol and thus a NIC instead of a HBA. Questionable whether this is a good idea as a HBA provides dual 2Gb pipes - and the typical NIC used will be shared IP running at best at 1Gb, using a high latency protocol like TCP. A better option than HBAs are using HCAs and Infiniband instead. This runs dual ports at 40Gb (each) using the low latency SRP storage protocol.

HP HBA Card compatibility-SunStoredge9990/Tagmastore 9990,SunStoragetek6540

Is there any site or way to check the compatibility of this HBA Card...
"HP StorageWorks FC1143 4Gb PCI-X 2.0 HBA AB429A" with Sun Storedge 9990 / Hitachi Tagmastore 9990, Sun StorageTek 6540.

I think the HCL is more for letting you know what hardware - in this case, the HBA - the Solaris OS will support. So, I'm thinking that most fibre-channel cards are built to an industry standard for fibre-channel and that if the OS has a driver for that particular card, it should meet your needs when you connect your Solaris server via the HBA to your 9990/6540. There may be an issue if link speed on each end doesn't match and HBA can't strp down to 9990/6540's link speed.
One way to find out for sure (if you already paid for the HP HBA) -- connect it up and see if it works.

DVD Burn problem. "Device error - the target device isn't suitable for use"

Hello everyone,
I initially had a lot of problems with PE8. However the nVidia driver update solved most of them.
Just thought it was important to report success as well as failure!
However one problem remains. I get the following error at the 96% mark while burning. "Device error - the target device isn't suitable for use". It is always at the 96% mark and the program is "compiling [something]" when this happens.
Having searched this site I notice that user rgferg posted a similar problem 13 days ago but was redirected to repost in a different place, but never did.
I have tried to burn a 1hr clip 4 times and every time I have selected the slower burn speed (8MB/s) as has been suggested. It seems that inferior media is a culprit, so I have bought some [quality] Verbatim DVD-R media to try in my Phillips SATA optical drive. I am sceptical this will work, but open minded nonetheless. I will give it a whirl when my computer has stopped capturing the VHS I am working on.
Each time the burn failed the disk was automatically ejected and the burn process had actually started and progressed perhaps ~40% or so.
This indicates to me that it is a drive sharing issue, rather than a media issue. Somewhere on this forum it suggests that I go through a 20+ step process and delete/disable every piece of software that can compete with Premiere among other things. IF I do this what do I burn with outside of Adobe? Do I have to get imgburn or whatever it was called? What if I like Nero? Nero 6 has worked great for me for 3 years.
So given I am willing to uninstall my old optical drive burning software, who out there can recommened commercial software that for them creates a painless Adobe burning experience with no errors or conflicts? Perhaps there is another solution that I did not see on this forum?
I am running Windows XP SP3. I have the latest nVidia drivers for my SLI GeForce 7600 GS cards. I have 3 monitors. RAID 0 SATA, 2GB RAM, Athlon X2 5400.
Justin.

OK been working through the list of 20 things Adobe recommends to fix DVD burn error. No luck yet:
system meets minimum requirements
Project size does not exceed disk capacity
successfully burned project to DVD folder -thus skip to step 8.
8. Using new blank media for burning
9. Try different media and DVD burners. Bought Verbatim DVD-R. Don't have another DVD burner. Adobe's supported burner list is VERY short, so of course mine is not on it.
10. Uninstalled Nero 6. Did NOT uninstall Acronis True Image workstation or Lightscribe. These do not access the drive unless I say so!
11. Have not yet disabled startup items and services. This will take a lot of work and will leave to last. Deactivated Spybot thus far.....
12. Disabled IMAPI CD burning COM
13. DMA if available already set. Haven't set this in BIOS yet. I already think it is, but will check next boot.
14. Updated DVD firmware
15. Already updated nVidia drivers
16. Don't have any other DVD drives to disconnect.
17. MPEG workaround. Will resort to if required.
18. Disable Autoplay? XP only has "prompt me each time to choose an action". I have set this for ALL file types.
19. Have NOT refreshed the DVD drivers in the registry. This step involves uninstalling PE8. Will leave this as last resort.
20. Visit forums to see if other have the same problem. Hi guys
So still working through some of the items above.
Can anyone direct me to advice on how to write the encoded files sent to the hard drive, or the VOB files that PE8 failed to burn to a disk? Will the former work with DVD menus?
What a process.
Stay tuned.
Justin.

Error while burning dvd in pre 8.0 "device error-the target device isn't suitable for use."

I am trying to burn a dvd in premiere elements 8.0 but after 96% iam getting this error :
"device error-the target device isn't suitable for use."
I have tried all of these steps according to this link :http://kb2.adobe.com/cps/515/cpsid_51553.html.
System configration :
win vista 32 bit .
Processor :Amd athlon 64 dual core 2.60 ghz .
Ram :3 gb
Graphic card :nvidia geforce 6150 se .
Camcoder model number :JVC gz-hm320.
Format :.mts
Frame size :1920/1080
Frame rate :29.97.
Please look into this problem .
Regards
Manoj Khati

This is a user to user forum, not Adobe support... YOU look into things, based on advice other users are able to give
Things and Software to AVOID when authoring/burning a DVD
Read all links/sub-links to create a "best" burned disc
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus a Microsoft note http://support.microsoft.com/kb/314060
And another note http://support.microsoft.com/kb/982116

HBA card suitable for HP ProLiant DL380G7 Server

Similar Messages

Maybe you are looking for