HBA / Part Number for 3100 array connect to Sun 420 R
Hi
I need to connect the 420R server to 3100 array. What type of HBA is needed and part number if anybody has.
Thanks
Srini
Hello Srini,
just review the Full Components Lists of the E420R and StorEdge 3120 for supported SCSI controllers.
http://sunsolve.sun.com/handbook_pub/Systems/E420R/E420R.html
http://sunsolve.sun.com/handbook_pub/Systems/3120_R/3120_R.html
Michael
Similar Messages
-
Part Number for parallel cable connecting SCXI-2400 to SCXI-1200
If no longer available from NI, would anyone have the (upper) rear connector pinout for the SCXI-2400 so I can make my own cable using half of a DB-25 parallel printer cable and the appropriate AMP connector?
Hi,
I'm not sure which of the two connectors is the upper one, but there are two connections. One of them uses an RS-232 cable connection and the other is just a 4 wire RS-485 terminal block connector. The latter of the two has a pinout shown here in this article. Here is another useful article that addresses setting up your chassis. I hope this helps.
Chris W
Message Edited by Chris W. on 02-12-2009 04:52 PM -
What is the correct part number for dvi to vga adapter for macbook pro model A1260
Can someone tell me the Apple part number for the DVI to VGA adapter that came with a Macbook Pro model A1260? (Early 2008)
My adapter has reached the end of useful life.
Thanks!You have a MacBook Pro 15" Early 2009 (MacBook Pro 4,1)
The Mac's port is a Dual-link DVI (VGA, Composite and S-video with adapter)
The DVI connector connects to the Dual link-DVI port,thus you need a DVI to VGA adapter.
http://eshop.macsales.com/item/Micro%20Accessories/DVIVGA/
You also can search the Apple store online for the part, but it's so basic and simple that paying more for Apple's version is just for looks. -
Looking for spare part number for Touch Smart 9300
The problem is the RJ45 connection does not show up in devices, have swapped out assemblies and others work fine in that kiosk. Have installed in other kiosks and problem follows the device assembly.
The device assembly is a little module that has USB connections and a RJ45 network connection on it. We just need the little assembly, we've tried ordering the system board but it does not come with it. Does anyone know of the HP spare parts number for this piece?
Thanks in advance!Please see if you can identify the part using these two HP resources;
HP PartSurfer for TouchSmart 9300 Elite
HP Illustrated Parts & Service Map for TouchSmart 9300 Elite
I think the part you need is either;
I/O board with DataPort, with IR 670183-001
or
I/O board with DataPort, w/no IR 670184-001
These boards plug in near the "button" CMOS CR2032 battery.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Satellite Pro P100: What is the Toshiba part number for a 2GB memory module
Unable to find any way of emailing this question so I have posted it on the forum. Sure this info should be more readily available without having to ask.
What is the Toshiba part number for a 2GB memory module for a PSPA4E-00F007. That's for a Satellite Pro P100 T2400
http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie=yes&PRODUCT_ID=115421
Crucial Memory gives me this module - is that correct?
http://www.crucial.com/uk/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304
Found this via Kingstons site - is this also correct?
http://www.dabs.com/productview.aspx?QuickLinx=4P3V
Would really appreciate some official clarification here.
Many ThanksIt must be PA3513U-1M2G. You must check if this module is compatible with your notebook model. I think so.
Anyway I recommend you to buy high quality product like Kingston modules. -
I need to find the correct part number for the ac-charger for hp mini 110-1191eo (part vj213ea#uuw).
This question was solved.
View Solution.Good question.
That I don't have a definite 100% answer to.
It probably is OK. Wattage is what it is rated at. More wattage is probably a good thing, and I have read that = or - .5v is not supposed to be an issue.
You can do a google search of the part number for your power adapter and see if they still carry it, if you are concerned.
Paul -
What is the correct part number for the LCD inverter board for an A1138 15" PowerBook G4 ( 1.67GHz superdrive/ Hi-res model)?
Hello,
Part number 614-0305-A
Hope this helps. -
Part number for hp officejet 8600 feed roller
I have a HP OfficeJet pro 8600 . What is the part number for the cassette feed roller ? Mine has ripped apart.
Hi Babs,
Unfortunately, there is not a separate brightness setting for the number pad. If it is too bright for you, you might try turning down the brightness some in the setting you found earlier.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert -
Part Number for Bluetooth 2.0 module
Does anyone have the part number for a Bluetooth 2.0 module for the Mac Pro?
I want to make sure I don't end up with the older version 1.1.
The part number I've been told to use is Model A1115, but one service site says that's a version 1.1 module, while the seller and another site say it is the 2.0 module.
I can't find anything at apple.com which lists the part numbers, though I might know where to look.Updated information (why can't we edit our posts any more?):
The part number I'm looking at is, well, several numbers on the module:
7C748005XUZ4A
ANATEL:0786-05-1993
003NY05015 0000
Model A1115
FCC ID: BCGA1115
IC: 579C-A1115
Again, I'm trying to figure out what version of Bluetooth this module is. -
What's the Part Number for an IdeaPad S12 recovery disk?
Hello,
I have an IdeaPad S12 (NVidia Ion). The recovery partition is gone. What's the part number for the recovery disk?
I mainly work with ThinkPad systems and Lenovo has an excellent part number system that covers just about every part you could imagine on a ThinkPad laptop. I assume Lenovo is also using this or something similar for it's consumer-line laptops. Sadly, Lenovo doesn't treat it's consumer laptop line with the same dignity as the ThinkPad line, and no customer support agent would tell me the part number, so I'm resorting to the forum for finding it.
Please help.Hi and welcome,
the ideapad as consumer-line has no part list ....as the thinkpads have...
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1 -
What is Toshiba part number for Satellite Pro L20
Morning
Does anyone happen to know the Toshiba Part Number for the Satellite Pro L20? I seem to have mislaid mine.
Thanks
SiHi
I dont know which number you mean exactly but there are many different Satellite Pro L20 models which different numbers.
All necessary details and serial numbers you will find on the label which was placed at the bottom of the unit. Please check this.
If you need these details for part ordering or recovery cd you should contact the Toshiba service partner. There you can order all supported parts. -
How do I determine the correct part number for a replacement topecase with keyboard?
What is the correct replacement part number for a Macbook 13" Core 2 Duo (Identifier 4,1) s/n
W88*****0P0 ?
<Edited by Host>Hi PePe
I made the change and it worked as I wanted it. Thanks a lot.
You say there's no need to Maintain the Responsibilities Rule. Can I ask what this section does and why it can be one or the other?
Regards
Declan -
What is the motherboar​d part number for hp dv6-3037tx​?
I have a bricked laptop and would like to buy a replacement motherboard
What is the motherboard part number for hp dv6-3037tx notebook PC?
Laptop product number is WY285PA.
And also, will the replacement motherboard be identical to the old one (i.e. same GPU). I don't want to get a new motherboard with a crappy GPU, my old one was great.
ThanksHi:
I can't find any specs on your notebook to pinpoint the motherboard you need.
Below is the link to the service manual for your notebook series.
http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf
See chapter 3, pages 22 and 23.
If you know your processor, GPU, and what wireless device you have, you should be able to select the exact part # you need.
Paul -
The LCD for my macbook air model number MC965LL/A (purchased 2011) is broken , where can I get new one and what is the part number for it ?
You can find them at vendors like ifixit and instructions to install.
http://www.ifixit.com/Mac-Parts/MacBook-Air-13%22-Mid-2011 -
What is the part number for a HP Pavilion dv6-2064ca VM280UA keyboard?
HI,
I was wondering if anyone can tell me the part number for HP Pavilion dv6-2064ca VM280UA keyboard?Here is the Manual:
Manual
Page 3-3 has a list of all the keyboards for the dv6 by color and language....
Maybe you are looking for
-
Hello All, When the LM3S8962 is the master, what pin is used when chip select is the default (0), or another value ? Despite this question being asked a few ways in the forums, NI's "ARM SPI Create Configuration Reference.vi" documentation for chip s
-
Hello There is already a discussion on this topic, however its answer is not accessible to any of us. Can you please provide some insight as how to go about achieving this solution. I know we have to customize the view. But where can we bring the inf
-
Hi, I have a LOV in my page its query should be based on item condition. So I tried using Apex provided Dynamic LOV Query with IF.. ELSE.. END IF condition.. But when I use this and run the page it is giving error "URL NOT FOUND". My query is IF :
-
Background: Initially there were 3 SSIDs configured but all of them were assigned a single interface and this interface was configured with the controller management IP address as DHCP server so that the WLC could assign IP addresses to wireless clie
-
Delete a version --- what am I doing wrong?
Hello everyone. I'm using Aperture 1.5.1. I have a NEF file that I sent to Photoshop Elements 4.0 as a TIFF to do some editing. This was done through the 'Open with External Editor' command. Upon returning to Aperture, I found the file as edited stac