HBO in perpetual buffering after silverlight update

Hi all.  I suddenly find myself unable to watch videos on HBO Go when I have watched 8 episodes in the past week with no problem. There are only two things that have changed from my last viewing to the one I am attempting: 1) I updated to the latest version of Skype three days ago; and 2) on the same day I also installed a plug-in for Silverlight (in order to watch an NBC Sports broadcast). I have uninstalled and re-installed Microsoft Silverlight to no avail.  I have tried using the HBO Go player in Google Chrome and in Firefox as well as Safari (where I originally viewed eight eps).  When the video tries to load it just says buffering and doesn't move on from that.  I can see the play/pause button in Google Chrome (but not in Safari) but the timecode is 0:00 to 0:00 anyhow.  As it loads, it says 53 of 55 components installed (or sometimes another figure, but always two shy of what it seems to want to load) and 'with 1 error.' Has anyone had similar problems? This is driving me crazy!

Just posting here in case this helps anyone: I managed to resolve the issue by downloading the Flash uninstaller and removing Flash and then reinstalling.  I also removed Silverlight completely for the time being.  It seems the two were at odds with each other, even after removing Silverlight -- perhaps Flash was corrupted/disturbed by the Silverlight plug-in.  The player is now running just fine on Safari.  

Similar Messages

  • After silverlight update laptop acts as if shift key held down

    After silverlight update laptop acts as if shift key held down, i.e. all caps, no numbers, it means I can't input passwords or open folders or select single items. Called Apple Help and they walked me through reinstlling OS from disk and it helped for about 12 hours. Now it shuffles between this ALLCAPS version and regular mode and won't allow me to reinstall anything. Any ideas? Thanks!

    lynnefromoakland wrote:
    HI tjk,
    Thanks for replying! I didn't do anything else during the 12 hours of normal use--the Silverlight update followed one of those automated updates that caused Netflix streaming to stop working. I haven't re-callled Apple Support because when I initially described the problem to the tech, he said to do the reinstall and if that didn't work I should bring the laptop in to one of the stores and see what they could do there. If the problem continues, will have to do that this weekend, I guess. . .
    Lynne
    Ok, that like means the AppleCare representative thinks there may be a hardware issue. One other thing you can try is an SMC Reset: http://support.apple.com/kb/HT3964

  • [SOLVED] RT2870 drops connection after pacman update

    Since last pacman upgrade my USB wireless works for just a few seconds while used; while watching transfer speed I see at first full speed and then going slower and slower and in a few secs totally stopped, without being disconnected. I have to reboot to get it working again (worked sometimes by ip link set wlan 0 down & up)
    No difference using Wicd or networkmanager.
    I have never had any issues earlier even since Kernel 3.0.
    Linksys router with standard WPA2 configuration, other computers in house connecting without problems.
    lsusb:
    D-Link System DWA-140 RangeBooster N Adapter(rev.B1) [Ralink RT2870]
    uname -r
    3.2.8-1-ARCH
    I've tried blacklisting all the kernel rt2800usb modules which supposedly have taken over specific Realtek drivers according to wiki
    https://wiki.archlinux.org/index.php/Wi … and_rt2870
    with no effect.
    Tried killing wpa_supplicant (only found one instance though) as suggested on some blogpost but no effect.
    Tried the proprietary rt2870sta driver as suggested in Wiki
      https://wiki.archlinux.org/index.php/Rt2870
    -got a working link on ra0 but it wouldn't connect to WiFi (kept asking for password).
    More debug info:
    lsmod | grep rt > lsmod.txt
    exportfs 3695 1 nfsd
    rt2800usb 14400 0
    rt2x00usb 9076 1 rt2800usb
    rt2800lib 40260 1 rt2800usb
    rt2x00lib 35183 3 rt2800lib,rt2x00usb,rt2800usb
    crc_ccitt 1363 1 rt2800lib
    mac80211 228527 3 rt2x00lib,rt2800lib,rt2x00usb
    cfg80211 172260 2 mac80211,rt2x00lib
    iTCO_vendor_support 1961 1 iTCO_wdt
    usbcore 146241 7 ehci_hcd,uhci_hcd,usbhid,rt2x00usb,rt2800usb,usblp
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.2.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012
    [ 0.000000] Command line: root=/dev/disk/by-uuid/ce706691-4517-477c-a42d-417ab8ffef38 loglevel=3 ro quiet resume=/dev/disk/by-uuid/5a94d96e-0fdd-425a-91c5-6fe96da349f0 nomodeset
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
    [ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: System manufacturer P5Q SE/P5Q SE, BIOS 0502 08/20/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-DFFFF write-protect
    [ 0.000000] E0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask FE0000000 write-back
    [ 0.000000] 2 base 120000000 mask FF0000000 write-back
    [ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xcff70 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff70000
    [ 0.000000] 0000000000 - 00cfe00000 page 2M
    [ 0.000000] 00cfe00000 - 00cff70000 page 4k
    [ 0.000000] kernel direct mapping tables up to cff70000 @ 1fffa000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
    [ 0.000000] 0100000000 - 0130000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 130000000 @ cff6a000-cff70000
    [ 0.000000] RAMDISK: 37d76000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000fb2c0 00024 (v02 ACPIAM)
    [ 0.000000] ACPI: XSDT 00000000cff70100 0005C (v01 A_M_I_ OEMXSDT 08000820 MSFT 00000097)
    [ 0.000000] ACPI: FACP 00000000cff70290 000F4 (v03 A_M_I_ OEMFACP 08000820 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 00000000cff70440 0907C (v01 A0985 A0985001 00000001 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000cff7e000 00040
    [ 0.000000] ACPI: APIC 00000000cff70390 0006C (v01 A_M_I_ OEMAPIC 08000820 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 00000000cff70400 0003C (v01 A_M_I_ OEMMCFG 08000820 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 00000000cff7e040 00081 (v01 A_M_I_ AMI_OEM 08000820 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000cff794c0 00038 (v01 A_M_I_ OEMHPET 08000820 MSFT 00000097)
    [ 0.000000] ACPI: OSFR 00000000cff79500 000B0 (v01 A_M_I_ OEMOSFR 08000820 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000cff7e5d0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-0000000130000000
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
    [ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
    [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00130000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[3] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000cff70
    [ 0.000000] 0: 0x00100000 -> 0x00130000
    [ 0.000000] On node 0 totalpages: 1048319
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 831408 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3072 pages used for memmap
    [ 0.000000] Normal zone: 193536 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000cff70000 - 00000000cff7e000
    [ 0.000000] PM: Registered nosave memory: 00000000cff7e000 - 00000000cffd0000
    [ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
    [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
    [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s82176 r8192 d24320 u524288
    [ 0.000000] pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028858
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/ce706691-4517-477c-a42d-417ab8ffef38 loglevel=3 ro quiet resume=/dev/disk/by-uuid/5a94d96e-0fdd-425a-91c5-6fe96da349f0 nomodeset
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 4047500k/4980736k available (4488k kernel code, 787460k absent, 145776k reserved, 4409k data, 736k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 2997.032 MHz processor.
    [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 5996.81 BogoMIPS (lpj=9990106)
    [ 0.003340] pid_max: default: 32768 minimum: 301
    [ 0.003361] Security Framework initialized
    [ 0.003367] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006673] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.008366] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.009152] Mount-cache hash table entries: 256
    [ 0.009284] Initializing cgroup subsys cpuacct
    [ 0.009289] Initializing cgroup subsys memory
    [ 0.009297] Initializing cgroup subsys devices
    [ 0.009298] Initializing cgroup subsys freezer
    [ 0.009300] Initializing cgroup subsys net_cls
    [ 0.009302] Initializing cgroup subsys blkio
    [ 0.009332] CPU: Physical Processor ID: 0
    [ 0.009333] CPU: Processor Core ID: 0
    [ 0.009335] mce: CPU supports 6 MCE banks
    [ 0.009342] CPU0: Thermal monitoring enabled (TM2)
    [ 0.009346] using mwait in idle threads.
    [ 0.010343] ACPI: Core revision 20110623
    [ 0.013339] ftrace: allocating 17394 entries in 69 pages
    [ 0.017049] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.050789] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
    [ 0.053330] APIC calibration not consistent with PM-Timer: 97ms instead of 100ms
    [ 0.053330] APIC delta adjusted to PM-Timer: 2081243 (2020688)
    [ 0.053330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.053330] ... version: 2
    [ 0.053330] ... bit width: 40
    [ 0.053330] ... generic registers: 2
    [ 0.053330] ... value mask: 000000ffffffffff
    [ 0.053330] ... max period: 000000007fffffff
    [ 0.053330] ... fixed-purpose events: 3
    [ 0.053330] ... event mask: 0000000700000003
    [ 0.070123] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.096675] Booting Node 0, Processors #1
    [ 0.096678] smpboot cpu 1: start_ip = 9a000
    [ 0.193349] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.199992] Brought up 2 CPUs
    [ 0.199995] Total of 2 processors activated (11992.51 BogoMIPS).
    [ 0.202833] devtmpfs: initialized
    [ 0.203768] PM: Registering ACPI NVS region at cff7e000 (335872 bytes)
    [ 0.203929] print_constraints: dummy:
    [ 0.203965] NET: Registered protocol family 16
    [ 0.204054] ACPI: bus type pci registered
    [ 0.204105] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.204107] PCI: not using MMCONFIG
    [ 0.204109] PCI: Using configuration type 1 for base access
    [ 0.204490] bio: create slab <bio-0> at 0
    [ 0.204490] ACPI: Added _OSI(Module Device)
    [ 0.204490] ACPI: Added _OSI(Processor Device)
    [ 0.204490] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.204490] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.204490] ACPI: EC: Look up EC in DSDT
    [ 0.206720] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.211061] ACPI: SSDT 00000000cff7e0d0 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
    [ 0.211260] ACPI: Dynamic OEM Table Load:
    [ 0.211262] ACPI: SSDT (null) 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
    [ 0.211420] ACPI: SSDT 00000000cff7e350 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
    [ 0.211621] ACPI: Dynamic OEM Table Load:
    [ 0.211623] ACPI: SSDT (null) 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
    [ 0.211740] ACPI: Interpreter enabled
    [ 0.211743] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.211758] ACPI: Using IOAPIC for interrupt routing
    [ 0.211772] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.212438] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.246853] ACPI: No dock devices found.
    [ 0.246855] HEST: Table not found.
    [ 0.246858] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.246900] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.246996] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.246998] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.247000] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.247001] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.247003] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
    [ 0.247012] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
    [ 0.247043] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
    [ 0.247071] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.247074] pci 0000:00:01.0: PME# disabled
    [ 0.247103] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
    [ 0.247137] pci 0000:00:1a.0: reg 20: [io 0xc800-0xc81f]
    [ 0.247179] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
    [ 0.247213] pci 0000:00:1a.1: reg 20: [io 0xc880-0xc89f]
    [ 0.247254] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
    [ 0.247288] pci 0000:00:1a.2: reg 20: [io 0xcc00-0xcc1f]
    [ 0.247336] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
    [ 0.247354] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
    [ 0.247428] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.247432] pci 0000:00:1a.7: PME# disabled
    [ 0.247451] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
    [ 0.247463] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
    [ 0.247516] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.247519] pci 0000:00:1b.0: PME# disabled
    [ 0.247535] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
    [ 0.247589] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.247592] pci 0000:00:1c.0: PME# disabled
    [ 0.247614] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
    [ 0.247669] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.247672] pci 0000:00:1c.5: PME# disabled
    [ 0.247690] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
    [ 0.247724] pci 0000:00:1d.0: reg 20: [io 0xc080-0xc09f]
    [ 0.247766] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
    [ 0.247800] pci 0000:00:1d.1: reg 20: [io 0xc400-0xc41f]
    [ 0.247841] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
    [ 0.247875] pci 0000:00:1d.2: reg 20: [io 0xc480-0xc49f]
    [ 0.247924] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
    [ 0.247941] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
    [ 0.248016] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.248019] pci 0000:00:1d.7: PME# disabled
    [ 0.248035] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [ 0.248084] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
    [ 0.248181] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
    [ 0.248193] pci 0000:00:1f.2: reg 10: [io 0xb000-0xb007]
    [ 0.248199] pci 0000:00:1f.2: reg 14: [io 0xac00-0xac03]
    [ 0.248205] pci 0000:00:1f.2: reg 18: [io 0xa880-0xa887]
    [ 0.248212] pci 0000:00:1f.2: reg 1c: [io 0xa800-0xa803]
    [ 0.248218] pci 0000:00:1f.2: reg 20: [io 0xa480-0xa48f]
    [ 0.248224] pci 0000:00:1f.2: reg 24: [io 0xa400-0xa40f]
    [ 0.248262] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
    [ 0.248274] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit]
    [ 0.248290] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
    [ 0.248317] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
    [ 0.248328] pci 0000:00:1f.5: reg 10: [io 0xc000-0xc007]
    [ 0.248335] pci 0000:00:1f.5: reg 14: [io 0xbc00-0xbc03]
    [ 0.248341] pci 0000:00:1f.5: reg 18: [io 0xb880-0xb887]
    [ 0.248347] pci 0000:00:1f.5: reg 1c: [io 0xb800-0xb803]
    [ 0.248353] pci 0000:00:1f.5: reg 20: [io 0xb480-0xb48f]
    [ 0.248359] pci 0000:00:1f.5: reg 24: [io 0xb400-0xb40f]
    [ 0.248418] pci 0000:01:00.0: [10de:05e2] type 0 class 0x000300
    [ 0.248426] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
    [ 0.248434] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.248443] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
    [ 0.248449] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f]
    [ 0.248455] pci 0000:01:00.0: reg 30: [mem 0xfea80000-0xfeafffff pref]
    [ 0.248497] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.248499] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.248502] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
    [ 0.248505] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.248536] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
    [ 0.248543] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.248590] pci 0000:02:00.0: [1969:1026] type 0 class 0x000200
    [ 0.248610] pci 0000:02:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
    [ 0.248621] pci 0000:02:00.0: reg 18: [io 0xec00-0xec7f]
    [ 0.248706] pci 0000:02:00.0: PME# supported from D3hot D3cold
    [ 0.248710] pci 0000:02:00.0: PME# disabled
    [ 0.248728] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.248736] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    [ 0.248739] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
    [ 0.248742] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.248794] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
    [ 0.248801] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.248803] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.248805] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.248807] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.248809] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
    [ 0.248822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.248885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    [ 0.248906] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.248953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    [ 0.248985] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    [ 0.249003] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.249005] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.249007] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.254308] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.254341] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.254373] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    [ 0.254405] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.254437] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [ 0.254469] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    [ 0.254501] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
    [ 0.254533] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.254589] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.254589] vgaarb: loaded
    [ 0.254589] vgaarb: bridge control possible 0000:01:00.0
    [ 0.254589] PCI: Using ACPI for IRQ routing
    [ 0.259493] PCI: pci_cache_line_size set to 64 bytes
    [ 0.259546] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.259547] reserve RAM buffer: 00000000cff70000 - 00000000cfffffff
    [ 0.259624] NetLabel: Initializing
    [ 0.259626] NetLabel: domain hash size = 128
    [ 0.259627] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.259637] NetLabel: unlabeled traffic allowed by default
    [ 0.259649] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.259653] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.259656] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.270027] Switching to clocksource hpet
    [ 0.274998] pnp: PnP ACPI init
    [ 0.275013] ACPI: bus type pnp registered
    [ 0.275071] pnp 00:00: [bus 00-ff]
    [ 0.275073] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.275074] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.275076] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.275078] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.275079] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [ 0.275081] pnp 00:00: [mem 0xd0000000-0xffffffff window]
    [ 0.275124] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.275131] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [ 0.275167] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
    [ 0.275170] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.275193] pnp 00:02: [dma 4]
    [ 0.275194] pnp 00:02: [io 0x0000-0x000f]
    [ 0.275196] pnp 00:02: [io 0x0081-0x0083]
    [ 0.275197] pnp 00:02: [io 0x0087]
    [ 0.275198] pnp 00:02: [io 0x0089-0x008b]
    [ 0.275202] pnp 00:02: [io 0x008f]
    [ 0.275203] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.275225] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.275234] pnp 00:03: [io 0x0070-0x0071]
    [ 0.275243] pnp 00:03: [irq 8]
    [ 0.275263] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.275269] pnp 00:04: [io 0x0061]
    [ 0.275290] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.275296] pnp 00:05: [io 0x00f0-0x00ff]
    [ 0.275300] pnp 00:05: [irq 13]
    [ 0.275322] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.275431] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.275433] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.275435] pnp 00:06: [io 0x0290-0x029f]
    [ 0.275467] system 00:06: [io 0x0290-0x029f] has been reserved
    [ 0.275470] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.275531] pnp 00:07: [io 0x0010-0x001f]
    [ 0.275533] pnp 00:07: [io 0x0022-0x003f]
    [ 0.275534] pnp 00:07: [io 0x0044-0x004d]
    [ 0.275536] pnp 00:07: [io 0x0050-0x005f]
    [ 0.275537] pnp 00:07: [io 0x0062-0x0063]
    [ 0.275538] pnp 00:07: [io 0x0065-0x006f]
    [ 0.275540] pnp 00:07: [io 0x0072-0x007f]
    [ 0.275541] pnp 00:07: [io 0x0080]
    [ 0.275542] pnp 00:07: [io 0x0084-0x0086]
    [ 0.275543] pnp 00:07: [io 0x0088]
    [ 0.275545] pnp 00:07: [io 0x008c-0x008e]
    [ 0.275546] pnp 00:07: [io 0x0090-0x009f]
    [ 0.275547] pnp 00:07: [io 0x00a2-0x00bf]
    [ 0.275549] pnp 00:07: [io 0x00e0-0x00ef]
    [ 0.275550] pnp 00:07: [io 0x04d0-0x04d1]
    [ 0.275551] pnp 00:07: [io 0x0800-0x087f]
    [ 0.275553] pnp 00:07: [io 0x0400-0x03ff disabled]
    [ 0.275554] pnp 00:07: [io 0x0500-0x057f]
    [ 0.275556] pnp 00:07: [mem 0xfed08000-0xfed08fff]
    [ 0.275557] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
    [ 0.275558] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
    [ 0.275560] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
    [ 0.275610] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 0.275612] system 00:07: [io 0x0800-0x087f] has been reserved
    [ 0.275614] system 00:07: [io 0x0500-0x057f] has been reserved
    [ 0.275616] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
    [ 0.275618] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.275620] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.275622] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
    [ 0.275625] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.275666] pnp 00:08: [mem 0xfed00000-0xfed003ff]
    [ 0.275690] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.275722] pnp 00:09: [mem 0xffb00000-0xffbfffff]
    [ 0.275724] pnp 00:09: [mem 0xfff00000-0xffffffff]
    [ 0.275745] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.275772] pnp 00:0a: [mem 0xffc00000-0xffefffff]
    [ 0.275807] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
    [ 0.275809] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.275845] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.275847] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.275848] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
    [ 0.275850] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
    [ 0.275885] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.275887] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.275889] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.275908] pnp 00:0c: [io 0x0060]
    [ 0.275909] pnp 00:0c: [io 0x0064]
    [ 0.275915] pnp 00:0c: [irq 1]
    [ 0.275945] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.276048] pnp 00:0d: [mem 0xe0000000-0xefffffff]
    [ 0.276083] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.276086] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.276183] pnp 00:0e: [mem 0x00000000-0x0009ffff]
    [ 0.276185] pnp 00:0e: [mem 0x000c0000-0x000cffff]
    [ 0.276187] pnp 00:0e: [mem 0x000e0000-0x000fffff]
    [ 0.276188] pnp 00:0e: [mem 0x00100000-0xcfffffff]
    [ 0.276190] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.276230] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.276232] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.276234] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.276236] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
    [ 0.276238] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.276322] pnp: PnP ACPI: found 15 devices
    [ 0.276323] ACPI: ACPI bus type pnp unregistered
    [ 0.282821] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.282845] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.282848] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf05fffff]
    [ 0.282851] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.282853] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.282855] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.282857] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
    [ 0.282860] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.282863] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
    [ 0.282865] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    [ 0.282869] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf05fffff]
    [ 0.282872] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.282877] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    [ 0.282879] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
    [ 0.282882] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.282885] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.282890] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
    [ 0.282906] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.282909] pci 0000:00:01.0: setting latency timer to 64
    [ 0.282913] pci 0000:00:1c.0: enabling device (0106 -> 0107)
    [ 0.282919] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.282922] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.282926] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 0.282929] pci 0000:00:1c.5: setting latency timer to 64
    [ 0.282934] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.282937] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.282938] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.282940] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.282942] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.282943] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
    [ 0.282945] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 0.282947] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
    [ 0.282949] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.282950] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
    [ 0.282952] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf05fffff]
    [ 0.282954] pci_bus 0000:03: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.282956] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.282957] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
    [ 0.282959] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.282961] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.282962] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.282964] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.282966] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.282967] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xffffffff]
    [ 0.282994] NET: Registered protocol family 2
    [ 0.283102] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.283911] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.286830] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.287221] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.287223] TCP reno registered
    [ 0.287231] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.287261] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.287380] NET: Registered protocol family 1
    [ 0.287533] pci 0000:01:00.0: Boot video device
    [ 0.287538] PCI: CLS 32 bytes, default 64
    [ 0.287587] Unpacking initramfs...
    [ 0.316854] Freeing initrd memory: 2536k freed
    [ 0.317344] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.317346] Placing 64MB software IO TLB between ffff8800cbf6a000 - ffff8800cff6a000
    [ 0.317348] software IO TLB at phys 0xcbf6a000 - 0xcff6a000
    [ 0.317656] audit: initializing netlink socket (disabled)
    [ 0.317668] type=2000 audit(1331070636.316:1): initialized
    [ 0.329229] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.351410] VFS: Disk quotas dquot_6.5.2
    [ 0.351460] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.351537] msgmni has been set to 7910
    [ 0.351674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.351694] io scheduler noop registered
    [ 0.351696] io scheduler deadline registered
    [ 0.351723] io scheduler cfq registered (default)
    [ 0.351807] pcieport 0000:00:01.0: setting latency timer to 64
    [ 0.351832] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.351871] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.351899] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.351947] pcieport 0000:00:1c.5: setting latency timer to 64
    [ 0.351975] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
    [ 0.352104] intel_idle: MWAIT substates: 0x22220
    [ 0.352105] intel_idle: does not run on family 6 model 23
    [ 0.352132] ERST: Table is not found!
    [ 0.352133] GHES: HEST is not enabled!
    [ 0.352190] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.423563] Linux agpgart interface v0.103
    [ 0.423624] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.423626] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.424352] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.424437] mousedev: PS/2 mouse device common for all mice
    [ 0.424487] rtc_cmos 00:03: RTC can wake from S4
    [ 0.424570] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.424591] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.424600] cpuidle: using governor ladder
    [ 0.424601] cpuidle: using governor menu
    [ 0.424761] TCP cubic registered
    [ 0.424857] NET: Registered protocol family 10
    [ 0.425184] NET: Registered protocol family 17
    [ 0.425187] Registering the dns_resolver key type
    [ 0.425287] PM: Checking hibernation image partition /dev/disk/by-uuid/5a94d96e-0fdd-425a-91c5-6fe96da349f0
    [ 0.442444] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.442457] PM: Hibernation image not present or could not be loaded.
    [ 0.442463] registered taskstats version 1
    [ 0.453068] rtc_cmos 00:03: setting system clock to 2012-03-06 21:50:37 UTC (1331070637)
    [ 0.453104] Initializing network drop monitor service
    [ 0.454145] Freeing unused kernel memory: 736k freed
    [ 0.454268] Write protecting the kernel read-only data: 8192k
    [ 0.458421] Freeing unused kernel memory: 1636k freed
    [ 0.460355] Freeing unused kernel memory: 660k freed
    [ 0.465585] udevd[37]: starting version 181
    [ 0.489348] usbcore: registered new interface driver usbfs
    [ 0.489369] usbcore: registered new interface driver hub
    [ 0.490707] usbcore: registered new device driver usb
    [ 0.492744] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.492777] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.492811] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 0.492815] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 0.492852] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 0.492879] ehci_hcd 0000:00:1a.7: debug port 1
    [ 0.497714] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.497902] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [ 0.497918] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
    [ 0.500931] SCSI subsystem initialized
    [ 0.504356] libata version 3.00 loaded.
    [ 0.510015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 0.510276] hub 1-0:1.0: USB hub found
    [ 0.510280] hub 1-0:1.0: 6 ports detected
    [ 0.510367] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.510390] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 0.510393] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 0.510401] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 0.510423] ehci_hcd 0000:00:1d.7: debug port 1
    [ 0.514289] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [ 0.514303] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
    [ 0.526698] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.526921] hub 2-0:1.0: USB hub found
    [ 0.526924] hub 2-0:1.0: 6 ports detected
    [ 0.527005] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.527010] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 0.527013] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 0.527021] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 0.527047] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
    [ 0.527239] hub 3-0:1.0: USB hub found
    [ 0.527243] hub 3-0:1.0: 2 ports detected
    [ 0.527303] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 0.527308] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 0.527310] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 0.527316] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 0.527341] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
    [ 0.527491] hub 4-0:1.0: USB hub found
    [ 0.527494] hub 4-0:1.0: 2 ports detected
    [ 0.527547] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.527552] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [ 0.527554] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 0.527560] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [ 0.527579] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
    [ 0.527671] hub 5-0:1.0: USB hub found
    [ 0.527673] hub 5-0:1.0: 2 ports detected
    [ 0.527725] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.527729] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.527731] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.527737] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 0.527755] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
    [ 0.527850] hub 6-0:1.0: USB hub found
    [ 0.527853] hub 6-0:1.0: 2 ports detected
    [ 0.527912] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.527916] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.527918] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.527925] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 0.527950] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
    [ 0.528041] hub 7-0:1.0: USB hub found
    [ 0.528044] hub 7-0:1.0: 2 ports detected
    [ 0.528095] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.528099] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.528102] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.528107] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 0.528126] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
    [ 0.528217] hub 8-0:1.0: USB hub found
    [ 0.528220] hub 8-0:1.0: 2 ports detected
    [ 0.528277] ata_piix 0000:00:1f.2: version 2.13
    [ 0.528284] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.528288] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 0.528322] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 0.528959] scsi0 : ata_piix
    [ 0.529039] scsi1 : ata_piix
    [ 0.529777] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
    [ 0.529781] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
    [ 0.529808] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.529812] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    [ 0.529848] ata_piix 0000:00:1f.5: setting latency timer to 64
    [ 0.530605] scsi2 : ata_piix
    [ 0.531122] scsi3 : ata_piix
    [ 0.531716] ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 19
    [ 0.531719] ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 19
    [ 0.833346] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 0.860625] ata3: SATA link down (SStatus 0 SControl 300)
    [ 0.871253] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.133351] usb 2-5: new high-speed USB device number 4 using ehci_hcd
    [ 1.320013] Refined TSC clocksource calibration: 2996.999 MHz.
    [ 1.320019] Switching to clocksource tsc
    [ 1.326723] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.326735] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.326848] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.326858] ata1.01: SATA link down (SStatus 0 SControl 300)
    [ 1.334172] ata1.00: ATA-7: WDC WD740ADFD-00NLR1, 20.07P20, max UDMA/133
    [ 1.334175] ata1.00: 145226112 sectors, multi 16: LBA48 NCQ (not used)
    [ 1.347438] ata1.00: configured for UDMA/133
    [ 1.347545] scsi 0:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 ANSI: 5
    [ 1.356883] ata2.00: ATA-7: SAMSUNG HD321KJ, CP100-05, max UDMA7
    [ 1.356887] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.371850] ata2.01: HPA detected: current 1465147055, native 1465149168
    [ 1.371855] ata2.01: ATA-8: WDC WD7500AACS-00ZJB0, 01.01B01, max UDMA/133
    [ 1.371858] ata2.01: 1465147055 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.376886] ata2.00: configured for UDMA/133
    [ 1.390777] ata2.01: configured for UDMA/133
    [ 1.390856] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
    [ 1.390990] scsi 1:0:1:0: Direct-Access ATA WDC WD7500AACS-0 01.0 PQ: 0 ANSI: 5
    [ 1.393373] sd 0:0:0:0: [sda] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB)
    [ 1.393409] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.393411] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.393427] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.393753] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.393840] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.393843] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.393860] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.394066] sd 1:0:1:0: [sdc] 1465147055 512-byte logical blocks: (750 GB/698 GiB)
    [ 1.404247] sdb: sdb2
    [ 1.404286] sd 1:0:1:0: [sdc] Write Protect is off
    [ 1.404290] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
    [ 1.404316] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.410206] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 1.410713] sdc: sdc1
    [ 1.412675] sd 1:0:1:0: [sdc] Attached SCSI disk
    [ 1.414632] sda: sda1 sda2 sda3
    [ 1.414890] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.483346] usb 7-1: new low-speed USB device number 2 using uhci_hcd
    [ 1.675206] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input1
    [ 1.675328] generic-usb 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0
    [ 1.675340] usbcore: registered new interface driver usbhid
    [ 1.675341] usbhid: USB HID core driver
    [ 1.847718] PM: Starting manual resume from disk
    [ 1.847720] PM: Hibernation image partition 8:2 present
    [ 1.847721] PM: Looking for hibernation image.
    [ 1.847851] PM: Image not found (code -22)
    [ 1.847854] PM: Hibernation image not present or could not be loaded.
    [ 1.887347] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.955372] udevd[142]: starting version 181
    [ 3.102653] FS-Cache: Loaded
    [ 3.138386] RPC: Registered named UNIX socket transport module.
    [ 3.138388] RPC: Registered udp transport module.
    [ 3.138390] RPC: Registered tcp transport module.
    [ 3.138391] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 3.206448] FS-Cache: Netfs 'nfs' registered for caching
    [ 3.340426] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 3.340433] ACPI: Power Button [PWRB]
    [ 3.340480] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 3.340483] ACPI: Power Button [PWRF]
    [ 3.367741] iTCO_vendor_support: vendor-support=0
    [ 3.368037] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 3.368042] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
    [ 3.368043] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.420207] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 3.420218] ATL1E 0000:02:00.0: setting latency timer to 64
    [ 3.460984] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 3.646986] nvidia: module license 'NVIDIA' taints kernel.
    [ 3.646990] Disabling lock debugging due to kernel taint
    [ 3.658130] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 3.658258] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
    [ 3.658557] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 3.808444] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 3.808451] nvidia 0000:01:00.0: setting latency timer to 64
    [ 3.808456] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 3.808546] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.20 Mon Feb 6 21:07:30 PST 2012
    [ 3.922194] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 3.922239] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [ 3.922258] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [ 3.964505] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
    [ 4.187852] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.420014] usb 2-1: reset high-speed USB device number 2 using ehci_hcd
    [ 4.487427] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10B6
    [ 4.487464] usbcore: registered new interface driver usblp
    [ 4.597153] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 4.597522] Registered led device: rt2800usb-phy0::radio
    [ 4.597538] Registered led device: rt2800usb-phy0::assoc
    [ 4.597553] Registered led device: rt2800usb-phy0::quality
    [ 4.597572] usbcore: registered new interface driver rt2800usb
    [ 4.896528] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 4.931213] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.962285] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.004187] Adding 8279036k swap on /dev/sda2. Priority:-1 extents:1 across:8279036k
    [ 5.887306] Installing knfsd (copyright (C) 1996 [email protected]).
    [ 36.076486] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 36.077062] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 50.139089] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 53.445833] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 53.490782] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 53.491333] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 53.732458] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 57.151881] wlan0: authenticate with c0:c1:c0:36:e7:5d (try 1)
    [ 57.153391] wlan0: authenticated
    [ 57.170628] wlan0: associate with c0:c1:c0:36:e7:5d (try 1)
    [ 57.174138] wlan0: RX AssocResp from c0:c1:c0:36:e7:5d (capab=0x411 status=0 aid=1)
    [ 57.174142] wlan0: associated
    [ 57.197936] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 57.264846] Intel AES-NI instructions are not detected.
    [ 67.456668] wlan0: no IPv6 routers present
    [ 306.299972] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
    [ 306.300485] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 310.963856] wlan0: deauthenticating from c0:c1:c0:36:e7:5d by local choice (reason=3)
    [ 311.091991] cfg80211: Calling CRDA to update world regulatory domain
    [ 311.342430] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 313.239060] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 314.375684] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 314.545703] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 314.545818] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
    [ 314.581962] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 314.582102] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
    [ 314.582703] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 314.583112] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 325.469976] eth0: no IPv6 routers present
    Last edited by dabbi2000 (2012-03-07 22:57:16)

    certainly didn't expect this... turned off power saving
    iwconfig wlan0 power off
    and all is well again. Surely doesn't explain why it started after kernel update. But it works...

  • [SOLVED] broken gnome after lib update

    Hi all
    After the update, startx fails w/ gnome but not w/ kde. I know that my xf86-video-intel was changed to xf86-video-intel-uxa. next I tried xf86-video-intel-sna (because it is listed on arch's xps15z page) and still no success.
    I would really love some help. The actual fail goes something like: wallpaper, mouse, top bar (w/ clock etc) and then the bottom bar, and right when it looks like it will hand over control, I get dropped into gnome error screen letting me know that something went wrong.
    Thank you
    Some logs:
    [root@clc ~]# grep EE /var/log/Xorg.0.log
    [ 189.827] Current Operating System: Linux clc 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 189.832] (II) Loading extension MIT-SCREEN-SAVER
    [ 189.833] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 189.833] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [root@clc ~]# grep WW /var/log/Xorg.0.log
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 189.831] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 189.831] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 189.831] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 189.832] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 189.833] (WW) Warning, couldn't open module vesa
    [ 189.833] (WW) Warning, couldn't open module fbdev
    xorg
    [ 142.495]
    X.Org X Server 1.12.3
    Release Date: 2012-07-09
    [ 142.495] X Protocol Version 11, Revision 0
    [ 142.495] Build Operating System: Linux 3.4.4-3-ARCH x86_64
    [ 142.495] Current Operating System: Linux clc 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64
    [ 142.495] Kernel command line: root=/dev/sda5 ro acpi=noirq i915.i915_enable_rc6=1 i915.semaphores=1
    [ 142.495] Build Date: 09 July 2012 03:59:39PM
    [ 142.495]
    [ 142.495] Current version of pixman: 0.26.2
    [ 142.495] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 142.495] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 142.495] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 18 08:07:11 2012
    [ 142.496] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 142.496] (==) No Layout section. Using the first Screen section.
    [ 142.496] (==) No screen section available. Using defaults.
    [ 142.496] (**) |-->Screen "Default Screen Section" (0)
    [ 142.496] (**) | |-->Monitor "<default monitor>"
    [ 142.496] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 142.496] (==) Automatically adding devices
    [ 142.496] (==) Automatically enabling devices
    [ 142.496] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 142.496] Entry deleted from font path.
    [ 142.497] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 142.497] Entry deleted from font path.
    [ 142.497] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 142.497] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 142.497] Entry deleted from font path.
    [ 142.497] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 142.497] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 142.497] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 142.497] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 142.497] (II) Loader magic: 0x7c8b00
    [ 142.497] (II) Module ABI versions:
    [ 142.497] X.Org ANSI C Emulation: 0.4
    [ 142.497] X.Org Video Driver: 12.0
    [ 142.497] X.Org XInput driver : 16.0
    [ 142.497] X.Org Server Extension : 6.0
    [ 142.498] (--) PCI:*(0:0:2:0) 8086:0126:1028:0446 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
    [ 142.498] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 142.499] (II) LoadModule: "extmod"
    [ 142.499] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 142.499] (II) Module extmod: vendor="X.Org Foundation"
    [ 142.499] compiled for 1.12.3, module version = 1.0.0
    [ 142.499] Module class: X.Org Server Extension
    [ 142.499] ABI class: X.Org Server Extension, version 6.0
    [ 142.499] (II) Loading extension MIT-SCREEN-SAVER
    [ 142.499] (II) Loading extension XFree86-VidModeExtension
    [ 142.499] (II) Loading extension XFree86-DGA
    [ 142.499] (II) Loading extension DPMS
    [ 142.499] (II) Loading extension XVideo
    [ 142.499] (II) Loading extension XVideo-MotionCompensation
    [ 142.499] (II) Loading extension X-Resource
    [ 142.499] (II) LoadModule: "dbe"
    [ 142.500] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 142.500] (II) Module dbe: vendor="X.Org Foundation"
    [ 142.500] compiled for 1.12.3, module version = 1.0.0
    [ 142.500] Module class: X.Org Server Extension
    [ 142.500] ABI class: X.Org Server Extension, version 6.0
    [ 142.500] (II) Loading extension DOUBLE-BUFFER
    [ 142.500] (II) LoadModule: "glx"
    [ 142.500] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 142.500] (II) Module glx: vendor="X.Org Foundation"
    [ 142.500] compiled for 1.12.3, module version = 1.0.0
    [ 142.500] ABI class: X.Org Server Extension, version 6.0
    [ 142.501] (==) AIGLX enabled
    [ 142.501] (II) Loading extension GLX
    [ 142.501] (II) LoadModule: "record"
    [ 142.501] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 142.501] (II) Module record: vendor="X.Org Foundation"
    [ 142.501] compiled for 1.12.3, module version = 1.13.0
    [ 142.501] Module class: X.Org Server Extension
    [ 142.501] ABI class: X.Org Server Extension, version 6.0
    [ 142.501] (II) Loading extension RECORD
    [ 142.501] (II) LoadModule: "dri"
    [ 142.501] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 142.502] (II) Module dri: vendor="X.Org Foundation"
    [ 142.502] compiled for 1.12.3, module version = 1.0.0
    [ 142.502] ABI class: X.Org Server Extension, version 6.0
    [ 142.502] (II) Loading extension XFree86-DRI
    [ 142.502] (II) LoadModule: "dri2"
    [ 142.502] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 142.502] (II) Module dri2: vendor="X.Org Foundation"
    [ 142.502] compiled for 1.12.3, module version = 1.2.0
    [ 142.502] ABI class: X.Org Server Extension, version 6.0
    [ 142.502] (II) Loading extension DRI2
    [ 142.502] (==) Matched intel as autoconfigured driver 0
    [ 142.502] (==) Matched vesa as autoconfigured driver 1
    [ 142.502] (==) Matched fbdev as autoconfigured driver 2
    [ 142.502] (==) Assigned the driver to the xf86ConfigLayout
    [ 142.502] (II) LoadModule: "intel"
    [ 142.502] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 142.503] (II) Module intel: vendor="X.Org Foundation"
    [ 142.503] compiled for 1.12.2, module version = 2.19.0
    [ 142.503] Module class: X.Org Video Driver
    [ 142.503] ABI class: X.Org Video Driver, version 12.0
    [ 142.503] (II) LoadModule: "vesa"
    [ 142.503] (WW) Warning, couldn't open module vesa
    [ 142.503] (II) UnloadModule: "vesa"
    [ 142.503] (II) Unloading vesa
    [ 142.503] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 142.503] (II) LoadModule: "fbdev"
    [ 142.504] (WW) Warning, couldn't open module fbdev
    [ 142.504] (II) UnloadModule: "fbdev"
    [ 142.504] (II) Unloading fbdev
    [ 142.504] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 142.504] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2)
    [ 142.505] (--) using VT number 7
    [ 142.521] drmOpenDevice: node name is /dev/dri/card0
    [ 142.521] drmOpenDevice: open result is 8, (OK)
    [ 142.521] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 142.522] drmOpenDevice: node name is /dev/dri/card0
    [ 142.522] drmOpenDevice: open result is 8, (OK)
    [ 142.522] drmOpenByBusid: drmOpenMinor returns 8
    [ 142.522] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 142.522] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 142.522] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 142.522] (==) intel(0): RGB weight 888
    [ 142.522] (==) intel(0): Default visual is TrueColor
    [ 142.522] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
    [ 142.522] (--) intel(0): Chipset: "Sandybridge Mobile (GT2+)"
    [ 142.522] (--) intel(0): Disabling use of vmap
    [ 142.522] (**) intel(0): Framebuffer tiled
    [ 142.522] (**) intel(0): Pixmaps tiled
    [ 142.522] (**) intel(0): 3D buffers tiled
    [ 142.522] (**) intel(0): Throttling enabled
    [ 142.522] (**) intel(0): Delayed flush enabled
    [ 142.522] (II) intel(0): Output LVDS1 has no monitor section
    [ 142.523] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
    [ 142.523] (II) intel(0): Output VGA1 has no monitor section
    [ 142.524] (II) intel(0): Output HDMI1 has no monitor section
    [ 142.563] (II) intel(0): Output DP1 has no monitor section
    [ 142.563] (II) intel(0): EDID for output LVDS1
    [ 142.563] (II) intel(0): Manufacturer: AUO Model: 30ed Serial#: 0
    [ 142.563] (II) intel(0): Year: 2010 Week: 0
    [ 142.563] (II) intel(0): EDID Version: 1.4
    [ 142.563] (II) intel(0): Digital Display Input
    [ 142.563] (II) intel(0): 6 bits per channel
    [ 142.563] (II) intel(0): Digital interface is undefined
    [ 142.563] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
    [ 142.563] (II) intel(0): Gamma: 2.20
    [ 142.563] (II) intel(0): No DPMS capabilities specified
    [ 142.563] (II) intel(0): Supported color encodings: RGB 4:4:4
    [ 142.563] (II) intel(0): First detailed timing is preferred mode
    [ 142.563] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 142.564] (II) intel(0): redX: 0.620 redY: 0.349 greenX: 0.324 greenY: 0.606
    [ 142.564] (II) intel(0): blueX: 0.152 blueY: 0.118 whiteX: 0.313 whiteY: 0.329
    [ 142.564] (II) intel(0): Manufacturer's mask: 0
    [ 142.564] (II) intel(0): Supported detailed timing:
    [ 142.564] (II) intel(0): clock: 140.0 MHz Image Size: 344 x 193 mm
    [ 142.564] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2068 h_blank_end 2144 h_border: 0
    [ 142.564] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1084 v_blanking: 1088 v_border: 0
    [ 142.564] (II) intel(0): Supported detailed timing:
    [ 142.564] (II) intel(0): clock: 93.3 MHz Image Size: 344 x 193 mm
    [ 142.564] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2068 h_blank_end 2144 h_border: 0
    [ 142.564] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1084 v_blanking: 1088 v_border: 0
    [ 142.564] (II) intel(0): 00R4M\80B156HW3
    [ 142.564] (II) intel(0): Unknown vendor-specific block 0
    [ 142.564] (II) intel(0): EDID (in hex):
    [ 142.564] (II) intel(0): 00ffffffffffff0006afed3000000000
    [ 142.564] (II) intel(0): 001401049022137802d1159e59539b27
    [ 142.564] (II) intel(0): 1e505400000001010101010101010101
    [ 142.564] (II) intel(0): 010101010101b03680e0703808403064
    [ 142.564] (II) intel(0): 310058c11000001a752480e070380840
    [ 142.564] (II) intel(0): 3064310058c11000001a000000fe0030
    [ 142.564] (II) intel(0): 3052344d804231353648573300000000
    [ 142.564] (II) intel(0): 00004122960111000002010a20200030
    [ 142.564] (II) intel(0): EDID vendor "AUO", prod id 12525
    [ 142.564] (II) intel(0): Printing DDC gathered Modelines:
    [ 142.564] (II) intel(0): Modeline "1920x1080"x0.0 140.00 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (65.3 kHz eP)
    [ 142.564] (II) intel(0): Modeline "1920x1080"x0.0 93.33 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (43.5 kHz e)
    [ 142.564] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 142.564] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 142.564] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 142.564] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 142.564] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 142.564] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 142.564] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 142.564] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 142.564] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 142.564] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 142.564] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 142.564] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 142.565] (II) intel(0): Printing probed modes for output LVDS1
    [ 142.565] (II) intel(0): Modeline "1920x1080"x60.0 140.00 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (65.3 kHz eP)
    [ 142.565] (II) intel(0): Modeline "1920x1080"x40.0 93.33 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (43.5 kHz e)
    [ 142.565] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 142.565] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
    [ 142.565] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
    [ 142.565] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 142.565] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 142.565] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 142.565] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 142.565] (II) intel(0): EDID for output VGA1
    [ 142.566] (II) intel(0): EDID for output HDMI1
    [ 142.606] (II) intel(0): EDID for output DP1
    [ 142.606] (II) intel(0): Output LVDS1 connected
    [ 142.606] (II) intel(0): Output VGA1 disconnected
    [ 142.606] (II) intel(0): Output HDMI1 disconnected
    [ 142.606] (II) intel(0): Output DP1 disconnected
    [ 142.607] (II) intel(0): Using exact sizes for initial modes
    [ 142.607] (II) intel(0): Output LVDS1 using initial mode 1920x1080
    [ 142.607] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 142.607] (**) intel(0): Display dimensions: (340, 190) mm
    [ 142.607] (**) intel(0): DPI set to (143, 144)
    [ 142.607] (II) Loading sub module "fb"
    [ 142.607] (II) LoadModule: "fb"
    [ 142.607] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 142.607] (II) Module fb: vendor="X.Org Foundation"
    [ 142.607] compiled for 1.12.3, module version = 1.0.0
    [ 142.607] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 142.607] (II) Loading sub module "dri2"
    [ 142.607] (II) LoadModule: "dri2"
    [ 142.608] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 142.608] (II) Module dri2: vendor="X.Org Foundation"
    [ 142.608] compiled for 1.12.3, module version = 1.2.0
    [ 142.608] ABI class: X.Org Server Extension, version 6.0
    [ 142.608] (==) Depth 24 pixmap format is 32 bpp
    [ 142.608] (II) intel(0): SNA initialized with SandyBridge backend
    [ 142.608] (==) intel(0): Backing store disabled
    [ 142.608] (==) intel(0): Silken mouse enabled
    [ 142.608] (II) intel(0): Initializing HW Cursor
    [ 142.608] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 142.609] (==) intel(0): DPMS enabled
    [ 142.609] (II) intel(0): [DRI2] Setup complete
    [ 142.610] (II) intel(0): [DRI2] DRI driver: i965
    [ 142.610] (II) intel(0): direct rendering: DRI2 Enabled
    [ 142.610] (==) intel(0): hotplug detection: "enabled"
    [ 142.610] (--) RandR disabled
    [ 142.610] (II) Initializing built-in extension Generic Event Extension
    [ 142.610] (II) Initializing built-in extension SHAPE
    [ 142.610] (II) Initializing built-in extension MIT-SHM
    [ 142.610] (II) Initializing built-in extension XInputExtension
    [ 142.610] (II) Initializing built-in extension XTEST
    [ 142.610] (II) Initializing built-in extension BIG-REQUESTS
    [ 142.610] (II) Initializing built-in extension SYNC
    [ 142.610] (II) Initializing built-in extension XKEYBOARD
    [ 142.610] (II) Initializing built-in extension XC-MISC
    [ 142.610] (II) Initializing built-in extension SECURITY
    [ 142.610] (II) Initializing built-in extension XINERAMA
    [ 142.610] (II) Initializing built-in extension XFIXES
    [ 142.610] (II) Initializing built-in extension RENDER
    [ 142.610] (II) Initializing built-in extension RANDR
    [ 142.610] (II) Initializing built-in extension COMPOSITE
    [ 142.610] (II) Initializing built-in extension DAMAGE
    [ 142.620] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 142.620] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 142.620] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 142.620] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 142.620] (II) AIGLX: Loaded and initialized i965
    [ 142.620] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 142.686] (II) intel(0): Setting screen physical size to 508 x 285
    [ 142.729] (II) config/udev: Adding input device Power Button (/dev/input/event7)
    [ 142.729] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 142.729] (II) LoadModule: "evdev"
    [ 142.729] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 142.729] (II) Module evdev: vendor="X.Org Foundation"
    [ 142.729] compiled for 1.12.0, module version = 2.7.0
    [ 142.729] Module class: X.Org XInput Driver
    [ 142.729] ABI class: X.Org XInput driver, version 16.0
    [ 142.729] (II) Using input driver 'evdev' for 'Power Button'
    [ 142.729] (**) Power Button: always reports core events
    [ 142.729] (**) evdev: Power Button: Device: "/dev/input/event7"
    [ 142.729] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 142.729] (--) evdev: Power Button: Found keys
    [ 142.729] (II) evdev: Power Button: Configuring as keyboard
    [ 142.730] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event7"
    [ 142.730] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 142.730] (**) Option "xkb_rules" "evdev"
    [ 142.730] (**) Option "xkb_model" "evdev"
    [ 142.730] (**) Option "xkb_layout" "us"
    [ 142.755] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
    [ 142.755] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 142.755] (II) Using input driver 'evdev' for 'Video Bus'
    [ 142.755] (**) Video Bus: always reports core events
    [ 142.755] (**) evdev: Video Bus: Device: "/dev/input/event15"
    [ 142.755] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 142.755] (--) evdev: Video Bus: Found keys
    [ 142.755] (II) evdev: Video Bus: Configuring as keyboard
    [ 142.755] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15/event15"
    [ 142.755] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 142.755] (**) Option "xkb_rules" "evdev"
    [ 142.755] (**) Option "xkb_model" "evdev"
    [ 142.755] (**) Option "xkb_layout" "us"
    [ 142.756] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
    [ 142.756] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 142.756] (II) Using input driver 'evdev' for 'Video Bus'
    [ 142.756] (**) Video Bus: always reports core events
    [ 142.756] (**) evdev: Video Bus: Device: "/dev/input/event14"
    [ 142.756] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 142.757] (--) evdev: Video Bus: Found keys
    [ 142.757] (II) evdev: Video Bus: Configuring as keyboard
    [ 142.757] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input14/event14"
    [ 142.757] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 142.757] (**) Option "xkb_rules" "evdev"
    [ 142.757] (**) Option "xkb_model" "evdev"
    [ 142.757] (**) Option "xkb_layout" "us"
    [ 142.758] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 142.758] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 142.758] (II) Using input driver 'evdev' for 'Power Button'
    [ 142.758] (**) Power Button: always reports core events
    [ 142.758] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 142.758] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 142.758] (--) evdev: Power Button: Found keys
    [ 142.758] (II) evdev: Power Button: Configuring as keyboard
    [ 142.758] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
    [ 142.758] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
    [ 142.758] (**) Option "xkb_rules" "evdev"
    [ 142.758] (**) Option "xkb_model" "evdev"
    [ 142.758] (**) Option "xkb_layout" "us"
    [ 142.759] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
    [ 142.759] (II) No input driver specified, ignoring this device.
    [ 142.759] (II) This device may have been added with another device file.
    [ 142.760] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
    [ 142.760] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 142.760] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 142.760] (**) Sleep Button: always reports core events
    [ 142.760] (**) evdev: Sleep Button: Device: "/dev/input/event4"
    [ 142.760] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 142.760] (--) evdev: Sleep Button: Found keys
    [ 142.760] (II) evdev: Sleep Button: Configuring as keyboard
    [ 142.760] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
    [ 142.760] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
    [ 142.760] (**) Option "xkb_rules" "evdev"
    [ 142.760] (**) Option "xkb_model" "evdev"
    [ 142.760] (**) Option "xkb_layout" "us"
    [ 142.761] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event12)
    [ 142.761] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "evdev keyboard catchall"
    [ 142.761] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2HDM'
    [ 142.761] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
    [ 142.761] (**) evdev: Laptop_Integrated_Webcam_2HDM: Device: "/dev/input/event12"
    [ 142.761] (--) evdev: Laptop_Integrated_Webcam_2HDM: Vendor 0x5986 Product 0x2af
    [ 142.761] (--) evdev: Laptop_Integrated_Webcam_2HDM: Found keys
    [ 142.761] (II) evdev: Laptop_Integrated_Webcam_2HDM: Configuring as keyboard
    [ 142.761] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12/event12"
    [ 142.761] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
    [ 142.761] (**) Option "xkb_rules" "evdev"
    [ 142.761] (**) Option "xkb_model" "evdev"
    [ 142.761] (**) Option "xkb_layout" "us"
    [ 142.762] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
    [ 142.762] (II) No input driver specified, ignoring this device.
    [ 142.762] (II) This device may have been added with another device file.
    [ 142.763] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
    [ 142.763] (II) No input driver specified, ignoring this device.
    [ 142.763] (II) This device may have been added with another device file.
    [ 142.763] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
    [ 142.763] (II) No input driver specified, ignoring this device.
    [ 142.763] (II) This device may have been added with another device file.
    [ 142.764] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
    [ 142.764] (II) No input driver specified, ignoring this device.
    [ 142.764] (II) This device may have been added with another device file.
    [ 142.765] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
    [ 142.765] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 142.765] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 142.765] (**) Logitech USB Receiver: always reports core events
    [ 142.765] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
    [ 142.765] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51b
    [ 142.765] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
    [ 142.765] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 142.765] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 142.765] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 142.765] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 142.765] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 142.765] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 142.765] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 142.765] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb2/2-2/2-2:1.0/input/input1/event1"
    [ 142.765] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12)
    [ 142.765] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 142.766] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 142.766] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 142.766] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 142.766] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 142.766] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 142.766] (II) No input driver specified, ignoring this device.
    [ 142.766] (II) This device may have been added with another device file.
    [ 142.766] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 142.766] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 142.766] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 142.766] (**) AT Translated Set 2 keyboard: always reports core events
    [ 142.766] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 142.766] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 142.767] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 142.767] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 142.767] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 142.767] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
    [ 142.767] (**) Option "xkb_rules" "evdev"
    [ 142.767] (**) Option "xkb_model" "evdev"
    [ 142.767] (**) Option "xkb_layout" "us"
    [ 142.767] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event13)
    [ 142.767] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
    [ 142.767] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
    [ 142.767] (**) ImPS/2 Generic Wheel Mouse: always reports core events
    [ 142.767] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event13"
    [ 142.767] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
    [ 142.767] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
    [ 142.767] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
    [ 142.767] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
    [ 142.767] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
    [ 142.767] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
    [ 142.767] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
    [ 142.767] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
    [ 142.767] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 142.767] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event13"
    [ 142.767] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 14)
    [ 142.767] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
    [ 142.767] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
    [ 142.767] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
    [ 142.767] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
    [ 142.767] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
    [ 142.767] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)
    [ 142.767] (II) No input driver specified, ignoring this device.
    [ 142.767] (II) This device may have been added with another device file.
    [ 142.767] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 142.767] (II) No input driver specified, ignoring this device.
    [ 142.767] (II) This device may have been added with another device file.
    [ 142.767] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event6)
    [ 142.767] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 142.767] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 142.767] (**) Dell WMI hotkeys: always reports core events
    [ 142.767] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event6"
    [ 142.767] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
    [ 142.767] (--) evdev: Dell WMI hotkeys: Found keys
    [ 142.768] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
    [ 142.768] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
    [ 142.768] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 15)
    [ 142.768] (**) Option "xkb_rules" "evdev"
    [ 142.768] (**) Option "xkb_model" "evdev"
    [ 142.768] (**) Option "xkb_layout" "us"
    [ 142.930] (II) intel(0): EDID vendor "AUO", prod id 12525
    [ 142.931] (II) intel(0): Printing DDC gathered Modelines:
    [ 142.931] (II) intel(0): Modeline "1920x1080"x0.0 140.00 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (65.3 kHz eP)
    [ 142.931] (II) intel(0): Modeline "1920x1080"x0.0 93.33 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (43.5 kHz e)
    [ 143.236] (II) intel(0): EDID vendor "AUO", prod id 12525
    [ 143.236] (II) intel(0): Printing DDC gathered Modelines:
    [ 143.236] (II) intel(0): Modeline "1920x1080"x0.0 140.00 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (65.3 kHz eP)
    [ 143.236] (II) intel(0): Modeline "1920x1080"x0.0 93.33 1920 1968 2068 2144 1080 1083 1084 1088 +hsync -vsync (43.5 kHz e)
    [ 148.677] (II) evdev: Power Button: Close
    [ 148.677] (II) UnloadModule: "evdev"
    [ 148.680] (II) evdev: Video Bus: Close
    [ 148.680] (II) UnloadModule: "evdev"
    [ 148.687] (II) evdev: Video Bus: Close
    [ 148.687] (II) UnloadModule: "evdev"
    [ 148.700] (II) evdev: Power Button: Close
    [ 148.700] (II) UnloadModule: "evdev"
    [ 148.703] (II) evdev: Sleep Button: Close
    [ 148.703] (II) UnloadModule: "evdev"
    [ 148.703] (II) evdev: Laptop_Integrated_Webcam_2HDM: Close
    [ 148.703] (II) UnloadModule: "evdev"
    [ 148.704] (II) evdev: Logitech USB Receiver: Close
    [ 148.704] (II) UnloadModule: "evdev"
    [ 148.705] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 148.705] (II) UnloadModule: "evdev"
    [ 148.705] (II) evdev: ImPS/2 Generic Wheel Mouse: Close
    [ 148.705] (II) UnloadModule: "evdev"
    [ 148.705] (II) evdev: Dell WMI hotkeys: Close
    [ 148.705] (II) UnloadModule: "evdev"
    [ 148.809] Server terminated successfully (0). Closing log file.
    startx
    X.Org X Server 1.12.3
    Release Date: 2012-07-09
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.4.4-3-ARCH x86_64
    Current Operating System: Linux clc 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64
    Kernel command line: root=/dev/sda5 ro acpi=noirq i915.i915_enable_rc6=1 i915.semaphores=1
    Build Date: 09 July 2012 03:59:39PM
    Current version of pixman: 0.26.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 18 08:07:11 2012
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    gnome-session[757]: WARNING: Could not connect to ConsoleKit: Could not get owner of name 'org.freedesktop.ConsoleKit': no such name
    gnome-session[757]: WARNING: Could not connect to ConsoleKit: Could not get owner of name 'org.freedesktop.ConsoleKit': no such name
    GNOME_KEYRING_CONTROL=/root/.cache/keyring-Gapdvn
    SSH_AUTH_SOCK=/root/.cache/keyring-Gapdvn/ssh
    GNOME_KEYRING_PID=776
    GNOME_KEYRING_CONTROL=/root/.cache/keyring-Gapdvn
    SSH_AUTH_SOCK=/root/.cache/keyring-Gapdvn/ssh
    GPG_AGENT_INFO=/root/.cache/keyring-Gapdvn/gpg:0:1
    GNOME_KEYRING_CONTROL=/root/.cache/keyring-Gapdvn
    SSH_AUTH_SOCK=/root/.cache/keyring-Gapdvn/ssh
    GPG_AGENT_INFO=/root/.cache/keyring-Gapdvn/gpg:0:1
    GNOME_KEYRING_CONTROL=/root/.cache/keyring-Gapdvn
    SSH_AUTH_SOCK=/root/.cache/keyring-Gapdvn/ssh
    GPG_AGENT_INFO=/root/.cache/keyring-Gapdvn/gpg:0:1
    (gnome-settings-daemon:773): libupower-glib-WARNING **: Couldn't enumerate devices: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
    (gnome-settings-daemon:773): power-plugin-WARNING **: failed to get device list: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
    ** (gnome-settings-daemon:773): WARNING **: Failed to connect context: OK
    ** (gnome-settings-daemon:773): WARNING **: cannot connect to ConsoleKit: Error calling StartServiceByName for org.freedesktop.ConsoleKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Permission denied
    (gnome-settings-daemon:773): color-plugin-WARNING **: failed to connect to colord: Error calling StartServiceByName for org.freedesktop.ColorManager: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
    ** (gnome-settings-daemon:773): WARNING **: cannot connect to ConsoleKit: Error calling StartServiceByName for org.freedesktop.ConsoleKit: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Permission denied
    (gnome-settings-daemon:773): power-plugin-WARNING **: Could not connect to UPower: Error calling StartServiceByName for org.freedesktop.UPower: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
    (gnome-settings-daemon:773): power-plugin-WARNING **: Could not connect to UPower: Error calling StartServiceByName for org.freedesktop.UPower: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
    (gnome-settings-daemon:773): media-keys-plugin-WARNING **: Failed to get proxy for upower: Error calling StartServiceByName for org.freedesktop.UPower: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
    Initializing tracker-store...
    Initializing tracker-miner-fs...
    Tracker-Message: Setting up monitor for changes to config file:'/root/.config/tracker/tracker-miner-fs.cfg'
    Tracker-Message: Setting up monitor for changes to config file:'/root/.config/tracker/tracker-store.cfg'
    Tracker-Message: Setting up monitor for changes to config file:'/root/.config/tracker/tracker-store.cfg'
    Starting log:
    File:'/root/.local/share/tracker/tracker-miner-fs.log'
    Starting log:
    File:'/root/.local/share/tracker/tracker-store.log'
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
    Failed to play sound: Not available
    ** (nm-applet:823): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
    ** Message: applet now removed from the notification area
    ** (nm-applet:823): WARNING **: fetch_connections_done: error fetching connections: (23) Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success.
    ** (nm-applet:823): WARNING **: Failed to register as an agent: (23) Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
    (tracker-miner-fs:822): GVFS-RemoteVolumeMonitor-WARNING **: remote volume monitor with dbus name org.gtk.Private.UDisks2VolumeMonitor is not supported
    (gnome-shell:814): GVFS-RemoteVolumeMonitor-WARNING **: remote volume monitor with dbus name org.gtk.Private.UDisks2VolumeMonitor is not supported
    Window manager warning: Log level 16: Could not initialize NMClient /org/freedesktop/NetworkManager: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
    (gnome-shell:814): AccountsService-WARNING **: Failed to create accounts proxy: Error calling StartServiceByName for org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
    Window manager warning: Log level 16: Error getting session for the process we are in: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success (g-dbus-error-quark 23)
    ** Message: applet now embedded in the notification area
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    (gnome-shell:814): GLib-GIO-CRITICAL **: g_dbus_proxy_call_internal: assertion `G_IS_DBUS_PROXY (proxy)' failed
    AccountsService:ERROR:act-user-manager.c:2156:load_users: assertion failed: (manager->priv->accounts_proxy != NULL)
    ** Message: applet now removed from the notification area
    gnome-session[757]: WARNING: Application 'gnome-shell.desktop' killed by signal 6
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    (gnome-shell:939): GVFS-RemoteVolumeMonitor-WARNING **: remote volume monitor with dbus name org.gtk.Private.UDisks2VolumeMonitor is not supported
    Window manager warning: Log level 16: Could not initialize NMClient /org/freedesktop/NetworkManager: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
    (gnome-shell:939): AccountsService-WARNING **: Failed to create accounts proxy: Error calling StartServiceByName for org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success
    Window manager warning: Log level 16: Error getting session for the process we are in: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program /usr/lib/dbus-1.0/dbus-daemon-launch-helper: Success (g-dbus-error-quark 23)
    ** Message: applet now embedded in the notification area
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    (gnome-shell:939): GLib-GIO-CRITICAL **: g_dbus_proxy_call_internal: assertion `G_IS_DBUS_PROXY (proxy)' failed
    AccountsService:ERROR:act-user-manager.c:2156:load_users: assertion failed: (manager->priv->accounts_proxy != NULL)
    ** Message: applet now removed from the notification area
    gnome-session[757]: WARNING: Application 'gnome-shell.desktop' killed by signal 6
    gnome-session[757]: WARNING: App 'gnome-shell.desktop' respawning too quickly
    gnome-session[757]: WARNING: Could not connect to ConsoleKit: Could not get owner of name 'org.freedesktop.ConsoleKit': no such name
    gnome-session[757]: WARNING: Could not connect to ConsoleKit: Could not get owner of name 'org.freedesktop.ConsoleKit': no such name
    (gnome-settings-daemon:773): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    (gnome-settings-daemon:773): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    [1342613232,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application
    xinit: connection to X server lost
    waiting for X server to shut down
    Received signal:1->'Hangup'
    Received signal:1->'Hangup'
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Received signal:15->'Terminated'
    (tracker-miner-fs:822): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
    (tracker-miner-fs:822): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
    (tracker-miner-fs:822): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: The connection is closed
    OK
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Received signal:15->'Terminated'
    OK
    Server terminated successfully (0). Closing log file.
    Last edited by killnine (2012-07-19 15:42:27)

    Trilby wrote:Are you trying to start X as root?  Why is Xorg looking in /root/.config/ ?
    I am. I prefer to run as root.
    I have tried running as non root and the result is the same.
    Do you think it has to do with /lib changes?

  • Netflix will not play on my Mac anymore after latest update...HELP!!

    After latest update, Netflix will no longer play.  When I select a movie, it prompts me to install Microsoft Silverlight, which I have repeatedly done.  Netflix claims the latest MAC update is to blame, not a Netflix issue....PLEASE, any assistance is greatly appreciated.

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    Profile Backup and Restore
    *http://kb.mozillazine.org/Profile_backup
    *https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • My Photoshop CS6  is opening as Photoshop cs6 extended after it updated this morning NOT PHOTOSHOP CS CLOUD

    my Photoshop CS6  is opening as Photoshop cs6 extended trial after it updated this morning I DO NOT HAVE PHOTOSHOP CS CLOUD

    Permanent reverts to Trial with CC ad.
    This happens often. Don't panic. Your serial number is still good, you simply need to re-enter it and you do not need to purchase anything. Follow these steps:
    On receiving Trial/Trial Expired screen
    Make sure that you are online
    Click on license this software
    Perpetual product owners: Log in with adobe ID and enter product serial number
    Product should be licensed successfully

  • After last update, flash won't run, camera won't work, slow slow slow!

    After the recent update, my camera won't work, can't do facetime or video in ichat.  Also shockwave and silverlight plug ins won't work so can't watch youtube or netflix.  On reboot my laptop is EXTREMELY Slow!
    help?

    Hi hadleyoil, and a warm welcome to the forums!
    Thanks for the report(s).
    That is generally the best cure, just be sure to Repair Permissions before & after any update!
    The combo update for PowerPC-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
    The combo update for Intel-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
    Repair Permissions before & after re-install, then reboot again each time.

  • SAFARI freezes on me after I updated the Adobe Flashplayer (file name:AdobeFlashPlayerInstaller_15_ltrosxd_aaa_aih(1).dmg). I have done some research on Apple's community support and have found many users with the same experiences, but no progress.

    My Safari App started freezing on me after my update with Adobe Flash Player (AdobeFlashPlayerInstaller_15_ltrosxd_aaa_aih(1).dmg). When I open up Safari, it'll freeze but the little ball as my cursor will keep rolling. I've tried emptying the cache files in the library like other answers found on other posts but have not made any progress. I've even uninstalled and re-installed Flash Player but Safari is still not working. Any suggestion?
    I am on OS X 10.9.5

    A smidgeon concerned that there are no replies to the person who posted his results of the test, but I really need this issue resolved, so here goes:
    Start time: 09:39:13 01/07/15
    Model Identifier: MacBookPro5,3
    System Version: OS X 10.9.5 (13F34)
    Kernel Version: Darwin 13.4.0
    Time since boot: 33 minutes
    Battery
       Cycle Count: 1155
       Condition: Replace Now
    SATA
       Hitachi HTS545032B9SA02                
       - S.M.A.R.T. status: Not Supported
    Diagnostic reports
       2014-12-16 AdobeAcrobat crash
       2014-12-16 UserEventAgent crash
       2014-12-23 QuickLookSatellite crash x4
       2014-12-23 com.apple.appkit.xpc.openAndSavePanelService crash
       2014-12-24 Adobe Illustrator crash
       2014-12-24 dynamiclinkmanager crash
       2014-12-25 Adobe Photoshop CC 2014 crash
       2014-12-27 FaceTime hang
       2014-12-29 com.apple.WebKit.Plugin.64 crash
       2014-12-30 iTunes hang
       2014-12-31 dynamiclinkmanager crash x5
       2015-01-01 dynamiclinkmanager crash x2
       2015-01-04 com.apple.WebKit.Plugin.64 crash
       2015-01-07 Creative Cloud crash
       2015-01-07 Image Capture hang
       2015-01-07 com.apple.WebKit.Plugin.64 crash
       2015-01-07 iTunes hang
    Log
       Jan  6 19:41:21 PM notification timeout (pid 254, Creative Cloud)
       Jan  6 19:41:21 PM notification timeout (pid 284, Core Sync)
       Jan  6 19:41:21 PM notification timeout (pid 456, Adobe CEF Helper)
       Jan  6 19:41:21 PM notification timeout (pid 455, Adobe CEF Helper)
       Jan  6 19:41:51 PM notification timeout (pid 284, Core Sync)
       Jan  6 20:02:14 PM notification timeout (pid 254, Creative Cloud)
       Jan  6 20:02:14 PM notification timeout (pid 284, Core Sync)
       Jan  6 20:02:14 PM notification timeout (pid 456, Adobe CEF Helper)
       Jan  6 20:02:14 PM notification timeout (pid 455, Adobe CEF Helper)
       Jan  6 20:02:44 PM notification timeout (pid 284, Core Sync)
       Jan  6 22:46:46 wl0: Roamed or switched channel, reason #8, bssid f8
       Jan  6 22:51:43 PM notification timeout (pid 284, Core Sync)
       Jan  6 22:52:13 PM notification timeout (pid 284, Core Sync)
       Jan  6 23:41:30 process com.apple.WebKit[6947] caught causing excessive wakeups. Observed wakeups rate (per sec): 240; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 1769796
       Jan  6 23:48:52 IOAudioStream[0xffffff80172d7e00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (9,70c)->(b,203c).
       Jan  6 23:54:45 process com.apple.WebKit[6947] caught causing excessive wakeups. Observed wakeups rate (per sec): 556; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 2004855
       Jan  7 00:35:49 process com.apple.WebKit[6947] caught causing excessive wakeups. Observed wakeups rate (per sec): 809; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 3273316
       Jan  7 01:14:20 PM notification timeout (pid 284, Core Sync)
       Jan  7 01:14:50 PM notification timeout (pid 284, Core Sync)
       Jan  7 08:12:25 process distnoted[158] caught causing excessive wakeups. Observed wakeups rate (per sec): 197; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 234302
       Jan  7 08:13:18 process mds[41] caught causing excessive wakeups. Observed wakeups rate (per sec): 431; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 336491
       Jan  7 08:14:30 process CalendarAgent[195] caught causing excessive wakeups. Observed wakeups rate (per sec): 308; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 81935
       Jan  7 08:16:32 process mds_stores[86] caught causing excessive wakeups. Observed wakeups rate (per sec): 216; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 166025
       Jan  7 08:19:47 process firefox[1745] caught causing excessive wakeups. Observed wakeups rate (per sec): 187; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 203899
       Jan  7 09:19:41 wl0: Roamed or switched channel, reason #3, bssid f8
    Daemons
       com.oracle.java.JavaUpdateHelper
       com.oracle.java.Helper-Tool
       com.google.keystone.daemon
       com.fitbit.galileod
    Agents
       com.hp.devicemonitor
       com.oracle.java.Java-Updater
       com.google.keystone.system.agent
       com.adobe.AdobeCreativeCloud
       com.genieo.completer.update
       com.genieo.completer.ltvbit
       com.genieo.completer.download
       com.facebook.videochat.kimberlyskinner.updater
       com.citrixonline.GoToMeeting.G2MUpdate
       com.adobe.ARM.UUID
    Bundles
       /System/Library/Extensions/hp_Inkjet1_io_enabler.kext
       - com.hp.print.hpio.Inkjet1.kext
       /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
       - com.AdobeAAMDetectLib.AdobeAAMDetect
       /Library/Internet Plug-Ins/AdobePDFViewer.plugin
       - com.adobe.acrobat.pdfviewer
       /Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
       - com.adobe.acrobat.pdfviewerNPAPI
       /Library/Internet Plug-Ins/DirectorShockwave.plugin
       - com.adobe.director.shockwave.pluginshim
       /Library/Internet Plug-Ins/Flash Player.plugin
       - N/A
       /Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
       - com.google.googletalkbrowserplugin
       /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
       - com.oracle.java.JavaAppletPlugin
       /Library/Internet Plug-Ins/o1dbrowserplugin.plugin
       - com.google.o1dbrowserplugin
       /Library/Internet Plug-Ins/Silverlight.plugin
       - com.microsoft.SilverlightPlugin
       /Library/PreferencePanes/Flash Player.prefPane
       - com.adobe.flashplayerpreferences
       /Library/PreferencePanes/JavaControlPanel.prefPane
       - com.oracle.java.JavaControlPanel
       /Library/ScriptingAdditions/Adobe Unit Types.osax
       - N/A
       Library/Address Book Plug-Ins/SkypeABDialer.bundle
       - com.skype.skypeabdialer
       Library/Address Book Plug-Ins/SkypeABSMS.bundle
       - com.skype.skypeabsms
       Library/Caches/com.apple.Safari/Extensions/Ghostery.safariextension
       - com.betteradvertising.ghostery
       Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
       - com.citrixonline.mac.WebDeploymentPlugin
       Library/Internet Plug-Ins/FacebookVideoCalling.bundle
       - com.skype.FacebookVideoCalling
       Library/Internet Plug-Ins/FreeConferenceCallPlugin.plugin
       - com.FreeConferenceCallPluginLib.FreeConferenceCallPlugin
       Library/Internet Plug-Ins/Picasa.plugin
       - com.google.PicasaPlugin
    Contents of /System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>KeepAlive</key>
        <dict>
        <key>SuccessfulExit</key>
        <false/>
        </dict>
        <key>Label</key>
        <string>com.apple.NetBootClientHelper</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/sbin/NetBootClientHelper</string>
        <string>-setSharingNames</string>
        <string>-resetLocalKDC</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
        <dict>
         <key>Label</key>
         <string>com.adobe.AAM.Startup-1.0</string>
         <key>Program</key>
         <string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
         <key>ProgramArguments</key>
         <array>
          <string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
          <string>-mode=logon</string>
         </array>
         <key>RunAtLoad</key>
         <true/>
         <key>LaunchOnlyOnce</key>
         <true/>
        </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.adobe.AdobeCreativeCloud.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.adobe.AdobeCreativeCloud</string>
        <key>Program</key>
        <string>/Applications/Utilities/Adobe Creative Cloud/ACC/Creative Cloud.app/Contents/MacOS/Creative Cloud</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Utilities/Adobe Creative Cloud/ACC/Creative Cloud.app/Contents/MacOS/Creative Cloud</string>
        <string>--showwindow=false</string>
              <string>--onOSstartup=true</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.google.keystone.agent.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.google.keystone.system.agent</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
         <string>/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/Conten ts/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftwareUpdateAg ent</string>
         <string>-runMode</string>
         <string>ifneeded</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>3523</integer>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>15</integer>
        <key>Minute</key>
        <integer>24</integer>
        <key>Weekday</key>
        <integer>1</integer>
        </dict>
       </dict>
       ...and 1 more line(s)
    Contents of /Library/LaunchDaemons/com.fitbit.galileod.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Program</key>
        <string>/usr/local/bin/galileod</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/bin/galileod</string>
        </array>
        <key>Label</key>
        <string>com.fitbit.galileod</string>
        <key>UserName</key>
        <string>root</string>
        <key>GroupName</key>
        <string>daemon</string>
        <key>InitGroups</key>
        <true/>
        <key>OnDemand</key>
        <false/>
        <key>ServiceIPC</key>
        <true/>
        <key>Sockets</key>
        <dict>
        <key>UserClients</key>
       ...and 27 more line(s)
    Contents of /Library/LaunchDaemons/com.google.keystone.daemon.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.google.keystone.daemon</string>
        <key>ProgramArguments</key>
        <array>
         <string>/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/Conten ts/MacOS/GoogleSoftwareUpdateDaemon</string>
        </array>
        <key>KeepAlive</key>
        <false/>
        <key>RunAtLoad</key>
        <false/>
        <key>MachServices</key>
        <dict>
        <key>com.google.Keystone.Daemon.UpdateEngine</key>
        <true/>
        <key>com.google.Keystone.Daemon.Administration</key>
        <true/>
        </dict>
        <key>UserName</key>
        <string>root</string>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
       ...and 4 more line(s)
    Contents of /Library/LaunchDaemons/com.oracle.java.Helper-Tool.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
               <key>Label</key>
               <string>com.oracle.java.Helper-Tool</string>
               <key>ProgramArguments</key>
        <array>
               <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Helper-Tool</string>
        </array>
        <key>WatchPaths</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/com.oracle.java.Java-Update r.plist</string>
        </array>
        <key>SHAuthorizationRight</key>
               <string>system.preferences</string>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.oracle.java.JavaUpdateHelper.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.oracle.java.JavaUpdateHelper</string>
        <key>MachServices</key>
        <dict>
        <key>com.oracle.java.JavaUpdateHelper</key>
        <true/>
        </dict>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.oracle.java.JavaUpdateHelper</string >
        </array>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
        <dict>
         <key>Label</key>
         <string>com.adobe.AAM.Scheduler-1.0</string>
         <key>Program</key>
         <string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
         <key>ProgramArguments</key>
         <array>
            <string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
            <string>-mode=scheduled</string>
         </array>
         <key>StartCalendarInterval</key>
         <dict>
           <key>Minute</key>
           <integer>0</integer>
           <key>Hour</key>
           <integer>2</integer>
         </dict>
        </dict>
       </plist>
    Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.adobe.ARM.UUID</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
        <string>semi-auto</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>12600</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.citrixonline.GoToMeeting.G2MUpdate.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.citrixonline.GoToMeeting.G2MUpdate</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Library/Application Support/CitrixOnline/GoToMeeting/G2MUpdate</string>
        </array>
        <key>StartInterval</key>
        <integer>3660</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.facebook.videochat.kimberlyskinner.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
         <key>Label</key>
         <string>com.facebook.videochat.kimberlyskinner.updater</string>
         <key>ProgramArguments</key>
         <array>
           <string>/usr/bin/java</string>
           <string>-cp</string>
           <string>/Users/USER/Library/Application Support/Facebook/video/3.1.0.522/FacebookUpdate.jar</string>
           <string>FacebookUpdate</string>
           <string>com.facebook.peep</string>
           <string>3.1.0.522</string>
         </array>
         <key>RunAtLoad</key>
         <true/>
         <key>StartInterval</key>
         <integer>10800</integer>
         <key>StandardErrorPath</key>
         <string>/dev/null</string>
         <key>StandardOutPath</key>
         <string>/dev/null</string>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.genieo.completer.download.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.genieo.completer.download</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/InstallerS< /string>
        <string>-trigger</string>
        <string>download</string>
        <string>-isDev</string>
        <string>0</string>
        <string>-installVersion</string>
        <string>16974</string>
        <string>-firstAppId</string>
        <string>327280029</string>
        </array>
        <key>WatchPaths</key>
        <array>
        <string>/Users/USER/Downloads</string>
        </array>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.genieo.completer.ltvbit.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.genieo.completer.ltvbit</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/InstallerS< /string>
        <string>-trigger</string>
        <string>ltvbit</string>
        <string>-isDev</string>
        <string>0</string>
        <string>-installVersion</string>
        <string>16974</string>
        <string>-firstAppId</string>
        <string>327280029</string>
        </array>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>4</integer>
        <key>Minute</key>
        <integer>51</integer>
        </dict>
       ...and 2 more line(s)
    Contents of Library/LaunchAgents/com.genieo.completer.update.plist (XML  document text)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.genieo.completer.update</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/InstallerS< /string>
        <string>-trigger</string>
        <string>update</string>
        <string>-isDev</string>
        <string>0</string>
        <string>-installVersion</string>
        <string>16974</string>
        <string>-firstAppId</string>
        <string>327280029</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>15</integer>
        <key>Minute</key>
       ...and 4 more line(s)
    Font issues: 3
    DNS: 65.32.5.111
    Listeners
       cupsd: ipp
    User login items
       iTunesHelper
       - /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
       Creative Cloud
       - /Applications/Utilities/Adobe Creative Cloud/ACC/Creative Cloud.app
       AdobeResourceSynchronizer
       - /Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app
    App extensions
       find: L*/P*/com.ap*.p*.ext*.*.*t: No such file or directory
    Safari extensions
       Ghostery
    Restricted files: 383
    Elapsed time (s): 505

  • Performance reduced under Bootcamp after EFI update on Macbook Pro Retina

    after i upgraded EFI on my retina macbook pro the proformence reduced to unusable. under heavy load under bootcamp windows7. the cpu clock drops and as well as cpu clock. this is the screen shot of gpu clock monitoring from windows u can see the gpu clock is running at 270Mhz at most of the time and trying to be back to 725Mhz(yea, not 900Mhz!) when im running a graphic benchmark at same time cpu will run about 1.1Ghz as well. i noticed that it will run 10-20sec normally then CPU and GPU clock will start dropping. It's almost like speedstep is programmed backwards. My CPU is constantly running at 3.1-3.2GHz, and then as soon as a game loads, it drops to 1.2GHz. I've lost track of how many times I reset the SMC  reseting SMC PRAM, reinstalling windows using Bootcamp or even erease the entire drive and start over from network recovery MacOS did not solve this problem. so all the recent games like COD MW3, Starcraft II, BF3,or D3 will only run about about 10 fps as i was playing them with no ploblem before the EFI update.
    this is killing me! please help.
    im in NY, in this season i dont think is the overheating problem. when i check the temperature, it stays about 80C (fans will run about 4k rpm). but some time heavy loaded Mac OS cpu is about 90 degree but only with 3k rpm fan kicked in.
    i did search online, seems that some other people have the same problem with rMBP or MBA 2012.
    anyone knows if i take my macbook pro to the store, will those people work at genuines bar help me with this "windows" problem?
    thanks!

    Hey Shadowyani, please take a time and fill a bug report at http://developer.apple.com/bugreporter/ . The machine is useless for me as it is now because I develop and use very GPU/CPU demanding scientific applications, after the update my realtime applications are completely useless as they drop from something like 25fps to 9 fps even on Mac OS X (no SMC reset fixed the issue). In bootcamp the situation is worse, my software runs at 4 fps and gaming turns to be impossible to play as well.
    Please let Apple know about the problem, fill a bug report, even if SMC reset once in a while fixed the issue for you (this is not a common behaviour and must be fixed). We paid the price for cutting edge technology.
    Apple shall not do a downgrade of the system after few weeks, remember that most of reviews and benchmarks were done BEFORE the EFI Update, so people are being fooled by Apple in this sense.

  • My ipod touch will no longer download new apps after i updated via apple store.How can i get the updates deleted or correct the problem moving forward?

    My ipod touch will no longer download new apps after I updated via apple store.It freezes now when I attempt to download and blanks the app off entirely . How can I reverse the updates or correct the problem moving forward?

    Basics from the manual are restart, reset, restore.
    Try those

  • Unable to Reboot After Software Update - Unable to Reinstall Mac OS 10.4.10

    Hello,
    I just bought a Macmini 9 months ago, and I believe I may need to either erase the HD to reinstall the original Mac OS (10.4.10) or else replace it. However, I am not familiar with Mac and don't know how to reformat the disk. Can anyone help?
    Each time there is a software update, I experience problems starting up from the HD. After the last update a few days ago, I am unable to start up from the HD at all. I tried using the original install CD 1 to reinstall Mac OS 10.4.10 with archiving. However, I received an error saying "unable to install because there is a newer version already installed." Therefore, I tried to start up from the HD again by pressing Option key at startup, but the Macmini continously turned off by itself without rebooting. I tried reinstalling Mac OS with the erase option, but it failed. After that, the Mac OS install CD1 only gives me the option to reinstall additional applications, but when I select continue, there is not HD shown to install the applications.
    Disk Utility First Aid on CD1 was unable to repair the disk. I received the following messages: "Invalid sibling link", "Volume check failed", "The underlying task reported failure on exit", "1 HFS volume checked", "1 volume could not be repaired because of an error."
    At the bottom of the page under Disk Utility, the following information about the disk is available. Format: Mac OS Extended (Journaled); Capacity: 111.5 GB (119,690,149,888 Bytes); Available: - ; Used: - ; Number of Files: - ; Owners Enabled: - ; Number of Folders: - .
    System Profiler is able to identify type, disk identifier, file system, etc. It shows the volume supports journaling, but is not journaled.
    Scan Image for Restore shows Library_Preferences (Empty), and Root applications are all grayed out.
    I performed the Apple Hardware Test (ver 3A129) by pressing D at startup. The test ran for 5 minutes and 6 seconds. It reported "No trouble found".
    It seems the HD is empty, but the install CD is not offering any options to reinstall the OS, only the additional applications. I believe it is a partition error, but I am not familiar with Mac and hesitate to proceed any further.
    How do I reformat the disk so that I can reinstall the original Mac OS 10.4 and 10.5?
    Your help is sincerely appreciated. Thanks.

    Good news!
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

  • Adobe Application Manager CC not working after last update

    Last night I avrived home and sat down to work on my website and other side projects after a long day at work.  I opened my application manager and it notified me that it had an update.  So naturally I agreed and was excited to see the new upgrade.  Sadly after a couple hours of trying to figure things out on to why I wasn't able to access my Adobe Muse and Adobe Application manager after the update I had to give up.   I was online with tech support about the issue and was given a link to download the application manager yet again (this would have been my 3rd attempt to do so, and the link that was given to me was outdated).  After finding out that this was going to take longer than I had hoped asked if the teck support could help me resolve the Muse issue.  I was told that I'd be transfered to the Muse support and never was after an hour or so.
    I'm now still stuck not being able to use muse (after a couple re-installs) and not able to use my application manager. 
    Currently when I lunch my application manager my backgound decktop goes black and the application manager pops up and is white with no options to choose and shows nothing.  When I try to use Muse  it askes me to log in, and then gives me an error message asking me to please try again later....
    Can anyone help, has anyone had this issue before??
    (running on a 64bit system, windows 8, Adobe CC Member)

    Hi LantzDesign,
    Could you please follow this step and let me know if it helps.
    Rename the OOBE Folder to OOBE.old from this location and relaunch Creative Cloud.
    C:\Users\(your Username)\AppData\Local\Adobe
    Regards,
    Abhijit

  • Unable to Log In After Software Update

    Hello:
    After running Software Update, I am unable to log in.
    I found the following support article:
    Mac OS X 10.5: Unable to log in after an upgrade install
    Article: TS1543
    http://support.apple.com/kb/TS1543?viewlocale=en_US
    However, upon step 8 of the instructions, the following error appears:
    delete Invalid Path
    <dscl_cmd> DS Error: -14009 (eUnknownNodeName)
    This is actually after an update (not an "upgrade"), so I'm not even sure these are the appropriate steps.
    This is the second time that I have been unable to log in after an update. The first time, I attempted to reset the password with the installation DVD; however, this resulted in "No LDAP Master" errors and I installed Mac OS X 10.5 Leopard Server on a second internal drive and configured everything again. After setting everything up on the second install, I was going to reformat the first boot drive. Unfortunately, I'm just back to where I started after running the updates. I'm not sure if having two volumes with Mac OS X Server installed makes a difference in the instructions in the article mentioned above or not.
    Another question: Is resetting the password with the installer DVD the same as using the Single User approach ("launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist", "ls /Users", then "dscl . -delete /Users/username AuthenticationAuthority")?
    If so, I'll just do that; however, I am hoping that the Single User approach might somehow avoid "No LDAP Master" errors again.
    Any suggestions are greatly appreciated.
    -Warren

    baltwo:
    Thanks! I think a week would have gone by before I realized this on my own.
    -Warren

  • HP ePrint iOS app no longer finds Photosmart C4780 after app update

    I have an HP Photosmart C4780 connected through WiFi to my network but sadly it's not supported by AirPrint on iDevices.
    So, I was using HP ePrint Home & Biz iOS app (version 4.1) which was very useful for me as it found the printer and allowed me to print from my iPad/iPhone. 
    Today I updated the app on my iPhone to version 5 (now simply named "HP ePrint" on the App Store) and after the update, the new version doesn't find my Photosmart C4780 anymore. I did the Activation thing on the iPhone, as it was requested to refresh the list of printer on my network in the All tab, but after Refresh no printer is found.
    Still I have the old 4.1 on my iPad (and hopefully in my iTunes library) and the printer is located, I assume, through mDSN as it shows the name specified for this setting.
    So, question is: Did you dropped support for Photosmart C4780 on 5.0 release of HP ePrint iOS app? If so, why did't you informed this appropriately on the app update text description in the App Store? A message like "some printers may not be supported anymore" would have been helpul.
    If HP ePrint should find Photosmart C4700 series printers and this is an issue, how should we proceed from here?
    Thanks.

    WilliamBPS, 
    I was not informed that support was removed from the app for certain printers. It may have been lost in the transition to the new updated app. I will deffinitly pass this information along as it is very important that the app supports as many printers as it can. I'll go ahead and take note of your printer model. If I find anything out about this, I'll try to give you an update in this thread. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • IPhone remote app no longer working after iPhone update to version 4.2.1

    I have 4 apple TV generation 3 devices. I have had these (and some older Apple TV 2 devices) for a number of years.
    I have home sharing enabled on all the TV devices and use the iPhone remote app or the iPad remote app to control them.
    After the update to version 4.2.1 my iPhone (and my wifes) can no longer see any of the apple TV devices and I get the message
    "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account $my account"
    Home sharing is turned on on the iPhone devices (I have disabled it and re-enabled it and re-signed in to prove this as well as re-downloading the remote app direct from the app store)
    Home sharing is enabled on all the Apple TV devices
    I know this is working as the iPads can still see the Apple TV devices, but the iPhone 5s's both myself and my wife have cannot see them.
    This has worked fine for years but after the 4.2.1 update the iPhone is unable to interact at all as if home sharing is not enabled.
    I've one through the trouble shooting guides on the support pages but they don't do anything, and I didn't expect them to as I know home sharing is setup just fine as a.) it was working b.) the iPads are still working with the apple TV's
    Suggestions ?

    Update:
    Issue is still occuring, after resetting wireless router.
    Router: Netgear WNDR3400, SSID's turned off, WMM is enabled.

Maybe you are looking for