HCI/ECC connection issue with reverse proxy
Hi,
we are struggling to set up the connection from C4C to ECC using a reverse proxy (apache).
Thank you for any help!
Best Regards
Florian
Our apache config is as follows:
<VirtualHost *:443>
ServerName customer.reverseproxy.com
SSLEngine On
SSLProxyEngine On
ErrorLog /var/www/customer/log/error.log
Customlog /var/www/customer/log/access.log "common"
# TransferLog "<Apache_home>/logs/access.log"
# Offical SSL Certificate for customer.reverseproxy.com
SSLCertificateFile "/etc/apache2/ssl/customer/customer_cert.pem"
SSLCertificateKeyFile "/etc/apache2/ssl/customer/customer_key_np.pem"
SSLCACertificateFile "/etc/apache2/ssl/customer/SSL123_CA_Bundle.pem"
# SSLCertificateChainFile "<Apache_home>/conf/proxy-server-ca.crt" # activate the client certificate authentication
#SSLCertificateChainFile "/etc/apache2/ssl/customer/SAP-CA.crt"
# Signing CA's for SAP client certificate (Baltimore CyberTrust Root & Verizon Public SureServer CA G14-SHA2 + more)
SSLCertificateChainFile "/etc/apache2/ssl/customer/SAPClientCA.pem"
SSLVerifyClient require
SSLVerifyDepth 10
SSLOptions +ExportCertData +StdEnvVars
# CA's from SAP and customer for backend connections between Proxy and SAP system (Baltimore CyberTrust Root & Verizon Public SureServer CA G14-SHA2 + more)
SSLProxyCACertificateFile "/etc/apache2/ssl/customer/SAP-CA.crt"
# SSLProxyMachineCertificateFile <Apache_home>/conf/proxy-client.pem
# initialize the special headers to a blank value to avoid http header forgeries
RequestHeader set SSL_CLIENT_CERT ""
<Location />
# add SSL_CLIENT_CERT header to forward real client certificate
RequestHeader set SSL_CLIENT_CERT "%{SSL_CLIENT_CERT}s"
ProxyPass https://sap.internal.com:8300/
ProxyPassReverse https://sap.internal.com:8300/
</Location>
</VirtualHost>
On the HCI we get the following error shown
Message Processing Log{
ContextName = com.sap.scenarios.cod2erp.customermaster.replicate
IntermediateError = true
MessageGuid = AFU2MVOblsS5yIwpSvYiCt7XnLaT
Node = vsaxxxxxx.od.sap.biz
OverallStatus = FAILED
ReceiverId = Q47_
StartTime = Tue Apr 21 11:15:31 UTC 2015
StopTime = Tue Apr 21 11:15:31 UTC 2015
Children [
Invoked endpoint{
Cxf.EndpointAddress = https://HCI.intaas.hana.ondemand.com/cxf/COD/ERP/BP_MASTER_REPLICATION
Error = Inbound processing in endpoint at https://HCI.intaas.hana.ondemand.com/cxf/COD/ERP/BP_MASTER_REPLICATION failed with message "Sequential processing failed for number 0. Exchange[Message: [Body is not logged]]. Caused by: [org.apache.cxf.interceptor.Fault - Could not send Message.]", caused by "SunCertPathBuilderException:unable to find valid certification path to requested target"
StartTime = Tue Apr 21 11:15:31 UTC 2015
Status = FAILED
StopTime = Tue Apr 21 11:15:31 UTC 2015
Children [
Entering Camel route route52{
StartTime = Tue Apr 21 11:15:31 UTC 2015
Children [
Exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-38 created in Endpoint[cxf://bean:my308416_]{
StartTime = Tue Apr 21 11:15:31 UTC 2015
Children [
Processing exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-38 in ref:encodingProcessor{
StartTime = Tue Apr 21 11:15:31 UTC 2015
StepId = process151
StopTime = Tue Apr 21 11:15:31 UTC 2015
Children [
Processing exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-38 in removeHeaders[*]{
StartTime = Tue Apr 21 11:15:31 UTC 2015
StepId = removeHeaders52
StopTime = Tue Apr 21 11:15:31 UTC 2015
Children [
Processing exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-38 in setHeader[MessageId]{
StartTime = Tue Apr 21 11:15:31 UTC 2015
StepId = setHeader76
StopTime = Tue Apr 21 11:15:31 UTC 2015
Children [
Processing exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-38 in sap-map-pi:COD_ERP_BusinessPartnerERPBulkReplicateRequest{
Sent To URI = sap-map-pi://COD_ERP_BusinessPartnerERPBulkReplicateRequest
StartTime = Tue Apr 21 11:15:31 UTC 2015
StepId = CallActivity_1
StopTime = Tue Apr 21 11:15:31 UTC 2015
Time Taken = 11
Children [
Processing exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-38 in ref:idocOutboundRequest{
StartTime = Tue Apr 21 11:15:31 UTC 2015
StepId = process152
StopTime = Tue Apr 21 11:15:31 UTC 2015
com.sap.sod.utils.idoc.soap.messageid= 00163E0CB1A01EE4BA82F713C72AD65B
Children [
Processing exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-38 in split[bean{idocPackageSplitter, method=split}]{
Error = org.apache.camel.CamelExchangeException: Sequential processing failed for number 0. Exchange[Message: [Body is not logged]]. Caused by: [org.apache.cxf.interceptor.Fault - Could not send Message.], cause: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
StartTime = Tue Apr 21 11:15:31 UTC 2015
StepId = CallActivity_2
StopTime = Tue Apr 21 11:15:31 UTC 2015
Children [
Successor Exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-39 created with reference to Exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-38{
StartTime = Tue Apr 21 11:15:31 UTC 2015
StopTime = Tue Apr 21 11:15:31 UTC 2015
Children [
Processing exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-39 in setHeader[SapIDocContentType]{
StartTime = Tue Apr 21 11:15:31 UTC 2015
StepId = setHeader77
StopTime = Tue Apr 21 11:15:31 UTC 2015
Children [
Processing exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-39 in removeHeader[ssl_client_cert]{
StartTime = Tue Apr 21 11:15:31 UTC 2015
StepId = removeHeader197
StopTime = Tue Apr 21 11:15:31 UTC 2015
Children [
Processing exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-39 in removeHeader[ssl_client_user]{
StartTime = Tue Apr 21 11:15:31 UTC 2015
StepId = removeHeader198
StopTime = Tue Apr 21 11:15:31 UTC 2015
Children [
Processing exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-39 in removeHeader[operationName]{
StartTime = Tue Apr 21 11:15:31 UTC 2015
StepId = removeHeader199
StopTime = Tue Apr 21 11:15:31 UTC 2015
Children [
Processing exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-39 in removeHeader[operationNamespace]{
StartTime = Tue Apr 21 11:15:31 UTC 2015
StepId = removeHeader200
StopTime = Tue Apr 21 11:15:31 UTC 2015
Children [
Processing exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-39 in cxf:bean:Q47_{
Error = org.apache.cxf.interceptor.Fault: Could not send Message., cause: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
Sent To URI = cxf://bean:Q47_
StartTime = Tue Apr 21 11:15:31 UTC 2015
StepId = MessageFlow_2
StopTime = Tue Apr 21 11:15:31 UTC 2015
Time Taken = 123
Children [
Sent message to endpoint{
Cxf.EndpointAddress = https://customer.reverseproxy.com:443/sap/bc/srt/idoc?sap-client=310
Error = Outbound processing in endpoint at https://customer.reverseproxy.com:443/sap/bc/srt/idoc?sap-client=310 failed with message "Could not send Message.", caused by "SunCertPathBuilderException:unable to find valid certification path to requested target"
StartTime = Tue Apr 21 11:15:31 UTC 2015
Status = FAILED
StopTime = Tue Apr 21 11:15:31 UTC 2015
Exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-39 failed{
StartTime = Tue Apr 21 11:15:31 UTC 2015
Status = FAILED
Exchange ID-vsaxxxxxx-od-sap-biz-40387-1427614280233-51-38 failed{
StartTime = Tue Apr 21 11:15:31 UTC 2015
Status = FAILED
Children [
Exiting Camel route route52{
StartTime = Tue Apr 21 11:15:31 UTC 2015
ReceiverIds [
Q47_
Hi Abinash,
now we are one step further and receive a HTTP 401 on the reverse proxy. It looks like the client cert from HCI is not handled correctly. Can you help?
Best Regards
Florian
HCI log
Sent message to endpoint{
Cxf.EndpointAddress = https://customer.reverse.com:443/sap/bc/srt/idoc?sap-client=310
Error = Outbound processing in endpoint at https://customer.reverse.com:443/sap/bc/srt/idoc?sap-client=310 failed with message "HTTP response '401: Unauthorized' when communicating with https://customer.reverse.com:443/sap/bc/srt/idoc?sap-client=310"
StartTime = Fri Apr 24 11:03:12 UTC 2015
Status = FAILED
StopTime = Fri Apr 24 11:03:12 UTC 2015
Apache config
<VirtualHost *:443>
ServerName cuscrm.webmail.cus.com
SSLEngine On
SSLProxyEngine On
ErrorLog /var/www/cuscrm/log/error.log
Customlog /var/www/cuscrm/log/access.log "common"
# TransferLog "<Apache_home>/logs/access.log"
# Offical SSL Certificate for cuscrm.webmail.cus.com
SSLCertificateFile "/etc/apache2/ssl/cuscrm/cuscrm_cert.pem"
SSLCertificateKeyFile "/etc/apache2/ssl/cuscrm/cuscrm_key_np.pem"
SSLCertificateChainFile "/etc/apache2/ssl/cuscrm/ThawteCAChain.pem"
# SAP Baltimore Cybertrust Chain for Client authentication
SSLCACertificateFile "/etc/apache2/ssl/cuscrm/SAPCybertrust.pem"
SSLVerifyClient require
SSLVerifyDepth 10
SSLOptions +ExportCertData +StdEnvVars
# CA's from SAP and Schunk for backend connections between Proxy and SAP system
#SSLProxyCACertificateFile "/etc/apache2/ssl/cuscrm/SAP-CA.crt"
SSLProxyCACertificateFile "/etc/apache2/ssl/cuscrm/SAPCHAIN.pem"
# SSLProxyMachineCertificateFile <Apache_home>/conf/proxy-client.pem
# initialize the special headers to a blank value to avoid http header forgeries
RequestHeader set SSL_CLIENT_CERT ""
<Location />
# add SSL_CLIENT_CERT header to forward real client certificate
RequestHeader set SSL_CLIENT_CERT "%{SSL_CLIENT_CERT}s"
ProxyPass https://internal.sap:8300/
ProxyPassReverse https://internal.sap:8300/
</Location>
</VirtualHost>
Similar Messages
-
SSL Issue with reverse proxy module
Hi there,
I'm hoping someone can help me. I am using Sun ONE Web Server 6.1SP7 Reverse Proxy Plugin to connect to a backend server over SSL.
However the backend server is reporting errors on the SSL handshake: SSL_ERROR_NO_CYPHER_OVERLAP
I have installed ssldump and can see the following set of cipher suites are offered by the client (in this case, the reverse proxy module:
New TCP connection #6: dptettsw02(62951) <-> dptdevss01(31006)
6 1 0.0105 (0.0105) C>S SSLv2 compatible client hello
Version 3.1
cipher suites
SSL2_CK_RC4
SSL2_CK_RC2
SSL2_CK_3DES
SSL2_CK_DES
SSL2_CK_RC4_EXPORT40
SSL2_CK_RC2_EXPORT40
TLS_RSA_WITH_RC4_128_MD5
Unknown value 0xfeff
TLS_RSA_WITH_3DES_EDE_CBC_SHA
Unknown value 0xfefe
TLS_RSA_WITH_DES_CBC_SHA
TLS_RSA_EXPORT1024_WITH_RC4_56_SHA
TLS_RSA_EXPORT1024_WITH_DES_CBC_SHA
TLS_RSA_EXPORT_WITH_RC4_40_MD5
TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5
How do I configure the reverse proxy module to use a different cipher suite?
Any help would be greatly appreciated and please let me know if anything is unclear
Thanks!
KevHi there.
The server.xml file is below:
<?xml version="1.0" encoding="UTF-8"?>
<!--
Copyright (c) 2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
-->
<!DOCTYPE SERVER PUBLIC "-//Sun Microsystems Inc.//DTD Sun ONE Web Server 6.1//EN" "file:///opt/SUNWwbsvr/servers/bin/https/dtds/sun-web-server_6_1.dtd">
<SERVER qosactive="no" qosmetricsinterval="30" qosrecomputeinterval="100">
<PROPERTY name="docroot" value="/opt/iplanet/servers/docs"/>
<PROPERTY name="user" value=""/>
<PROPERTY name="group" value=""/>
<PROPERTY name="chroot" value=""/>
<PROPERTY name="nice" value=""/>
<PROPERTY name="dir" value=""/>
<PROPERTY name="accesslog" value="/opt/SUNWwbsvr/servers/https-ETT03WEB02/logs/accessSSL"/>
<LS id="group1" ip="0.0.0.0" port="2080" acceptorthreads="1" blocking="no" security="off" defaultvs="https-ETT03WEB02" servername="dptettsw02"/>
<LS id="ls2_default" ip="0.0.0.0" port="20443" acceptorthreads="1" blocking="no" security="on" defaultvs="https-ETT03WEB02" servername="ptpcam-ptpett-drs.dwpptp.londondc.com">
<SSLPARAMS servercertnickname="Server-Cert" ssl2="off" ssl2ciphers="+rc4,+rc4export,+rc2,+rc2export,+desede3,+des" ssl3="on" ssl3tlsciphers="-rsa_rc4_128_sha,-rsa_rc4_128_md5,-rsa_rc4_56_sha,-rsa_rc4_40_md5,-rsa_3des_sha,-rsa_des_sha,-rsa_des_56_sha,-rsa_rc2_40_md5,+rsa_null_md5,-fortezza,-fortezza_rc4_128_sha,+fortezza_null,-fips_3des_sha,-fips_des_sha" tls="on" tlsrollback="off" clientauth="off"/>
</LS>
<MIME id="mime1" file="mime.types"/>
<ACLFILE id="acl1" file="/opt/SUNWwbsvr/servers/httpacl/generated.https-ETT03WEB02.acl"/>
<VSCLASS id="defaultclass" objectfile="obj.conf" rootobject="default" acceptlanguage="off">
<PROPERTY name="docroot" value="/opt/iplanet/servers/docs"/>
<PROPERTY name="user" value=""/>
<PROPERTY name="group" value=""/>
<PROPERTY name="chroot" value=""/>
<PROPERTY name="nice" value=""/>
<PROPERTY name="dir" value=""/>
<VS id="https-ETT03WEB02" connections="group1" urlhosts="dptettsw02" mime="mime1" aclids="acl1" state="on">
<USERDB id="default" database="default"/>
</VS>
<VS id="ETT03WEB02_SSL" connections="ls2_default" urlhosts="ptpcam-ptpett-web.dwpptp.londondc.com" mime="mime1" aclids="acl1" state="on">
<USERDB id="default" database="default"/>
</VS>
</VSCLASS>
<JAVA javahome="/opt/SUNWwbsvr/servers/bin/https/jdk" serverclasspath="/opt/SUNWwbsvr/servers/bin/https/jar/webserv-rt.jar:${java.home}/lib/tools.jar:/opt/SUNWwbsvr/servers/bin/https/jar/webserv-ext.jar:/opt/SUNWwbsvr/servers/bin/https/jar/webserv-jstl.jar:/opt/SUNWwbsvr/servers/bin/https/jar/ktsearch.jar" classpathsuffix="" envclasspathignored="true" debug="false" debugoptions="" dynamicreloadinterval="2">
<JVMOPTIONS>-Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter</JVMOPTIONS>
<JVMOPTIONS>-Dorg.xml.sax.driver=org.apache.crimson.parser.XMLReaderImpl</JVMOPTIONS>
<JVMOPTIONS>-Djava.security.policy=/opt/SUNWwbsvr/servers/https-ETT03WEB02/config/server.policy</JVMOPTIONS>
<JVMOPTIONS>-Djava.security.auth.login.config=/opt/SUNWwbsvr/servers/https-ETT03WEB02/config/login.conf</JVMOPTIONS>
<JVMOPTIONS>-Djava.util.logging.manager=com.iplanet.ias.server.logging.ServerLogManager</JVMOPTIONS>
<JVMOPTIONS>-Xmx256m</JVMOPTIONS>
<JVMOPTIONS>-Xrs</JVMOPTIONS>
<SECURITY defaultrealm="file" anonymousrole="ANYONE" audit="false">
<AUTHREALM name="file" classname="com.iplanet.ias.security.auth.realm.file.FileRealm">
<PROPERTY name="file" value="/opt/SUNWwbsvr/servers/https-ETT03WEB02/config/keyfile"/>
<PROPERTY name="jaas-context" value="fileRealm"/>
</AUTHREALM>
<AUTHREALM name="ldap" classname="com.iplanet.ias.security.auth.realm.ldap.LDAPRealm">
<PROPERTY name="directory" value="ldap://localhost:389"/>
<PROPERTY name="base-dn" value="o=isp"/>
<PROPERTY name="jaas-context" value="ldapRealm"/>
</AUTHREALM>
<AUTHREALM name="certificate" classname="com.iplanet.ias.security.auth.realm.certificate.CertificateRealm"/>
</SECURITY>
<RESOURCES/>
</JAVA>
<LOG file="/opt/SUNWwbsvr/servers/https-ETT03WEB02/logs/errors" loglevel="finest" logtoconsole="true" usesyslog="false" createconsole="false" logstderr="true" logstdout="true" logvsid="false"/>
</SERVER> -
BPC 4.2 connectivity issues with server
Hello All, I have a user that is experiencing connectivity issues with our server. This appears to be at a client level and I would like to know how to correct it. We are currently using BPC 4.2 (service pack 2).
The problem occurred when they had IE8 uninstalled and installed IE6 today. This morning he had no issues connecting to BPC w/ IE8, but lost that connection when IE6 was installed. When working through the connection wizard, the following errors appear.
Here are the pop-up error messages they are receiving:
"The server name, or IP address (srvbpmarl01) is unreachable now. Please check the following:
1. LAN connection or Internet connection is working properly.
2. Server name or IP address is invalid
Detailed Error Message: Internet connection is not available"
"The system cannot download information from server: SRVBPMARL01.
There may be a network or security issue.
Error message: Your LAN connection or Internet connection is not working properly.
Detailed error message: Internet connection is not available."
I can't help but feel this issue is a result of the IE 8/6 complications, but I do not know which actions to take next.
Thanks for any help you could provide!I don't think the problem is related to IE.
It seems to be more a problem of configuration of IE.
I suggest to chec the follow:
1. Please make sure you are not using any proxy into connection of IE. Ot if you neede then make sure you will add your server into exceptions of proxy.
2. Try to connect with IE to server. use: http://nameofserver/osoft and also http://nameofserver.
If you received errors in both cases then it seems it is a problem with installaion of IE.
If you are able to connect and to display the default page for osoft then it must be a configuration problem.
I suppose MSDTC or Pivot table services is not correct.Try to use slow connection when you connect to server not High connection.
Regards
Sorin Radulescu -
Peoplesoft Portal with Reverse Proxy, content provider also need RP?
Hello there,
I need your help, I am currently implementing a PS Portal, I set my CRM as content provider, for safety reasons public access portal is configured using a reverse proxy (rp), my question is: Is there a different option to configure the CRM also with reverse proxy? as static content generated by CRM are then shown through the Website Portal (already rp),
Thanks and regards.
Alexander C.I also would like overcome this issue. I could not find an answer anywhere on Metalink or OTN.
Can a reverse-proxy (i.e. using ProxyPass & Reverse) be used with and internal Portal?
John Z
Butler Mfg. Co.
[email protected] -
Portal 10.1.2 with reverse proxy
Hi,
Does anybody configure Portal 10.1.2 working with reverse proxy behind the firewall?
I tried using generic docs and Metalink Notes 270160.1, 262451.1, unsuccessful.
I ended with SSO not starting at all.
Now i have fresh install without proxy and I am looking for some success reference.
Thanx
JiriWhat are you going to use for the Reverse Proxy?
1) Apache
2) Oracle Isapi IIS Plugin
3) Oracle HTTP Server
4) Webcache
I've been dealing with basically #1, #2 for the past month so I could have some info for you there. How is your MT's / Infra configured? same server, different servers? Will the proxy be in another server? Do you have webcache running?
I would suggest making sure it works internally first with the name that you want before putting the reverse proxy infront of it. I have 1 URL that works now both internally and externally though a reverse proxy.
It sounds like your having some SSO configuration related issues with your name. These are somewhat difficult to troubleshoot, so if needed open a TAR and Oracle Support can pretty quickly help you resolve those. -
Connection issues with Safari 3
I'm having some connection issues with Safari 3.
When I connect wirelessly, Safari won't load any web pages. I go and use Firefox and everything is just peachy.
I've reset Safari, emptied the cache and whatnot. I went in and checked the permissions, everything checks out.
When I connect with Ethernet, there's nothing wrong, which is my dilemma.
Help would be greatly appreciated.There are a number of posts in the Leopard forum from people with direct experience with upgrading from Panther to Leopard. Here is a relevant thread from there that should reassure you.:
http://discussions.apple.com/thread.jspa?threadID=1418714
Your system should be fine for Leopard, but you will probably need a current version of Photoshop if you don't already have it. See this download:
http://www.adobe.com/support/products/pdfs/leopardsupport.pdf
Also, Leopard doesn't run Classic (OS 9) apps.
One caveat - first make a bootable backup "clone" of your present system onto an external firewire drive so you can recover if anything goes wrong. You can use the "Restore" tab of Disk Utility to make such a clone, and there are also Panther-compatible versions of Carbon Copy Cloner (v 2.3) and SuperDuper (v 2.1.4), both excellent for this.
It's even possible to a create second Panther clone on a different external volume to create a "dual-boot" system, using that volume to continue to run old applications that you can't run with Leopard. -
I had bad connection issues with my mobile device, so i pressed reset on my EA4500 router, and now when i connect to my network, it gives my limited connection even though i have 5 bars of signal. Not sure what to do now...
Resetting the router will erase all the settings you configured on the router since the initial setup. You manually configure the router's wireless settings so your wireless devices can have internet access again.
Procedure: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cfb50c0dc992443ab2405a782cca60f7_19073.xml&pid=80&...
Make sure to use a computer that is hardwired via Ethernet cable to the router.
For bad connection issues: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cf6ed888ce144d06905af4987887fd1b_KBxxxx_EN_v1.xml&... -
CR2008 connectivity issue with BOE Universes(sap and non sap universes)
Hi Experts !!
Recently we tried to build/connect to a Universe in Crystal Reports2008 via 'Make a new connection tab'.
The universes are of SAP BW or non SAP Lying in BOE Servers and we are trying to build reports on them by conncting/utilizing the universes as a database for Crystal Reporting.
Our issue is most of the time we are not able to connect to the Universes and the connectivity blows out by some 'communication Error' thing initially.
While at some other points in time, the connectivity takes us to the Universe and we are able to select few characteristics and key figures from the Universe but the moment we go futher and try to run by pressing 'OK' button it blows out and say' LOGON FAILED'.
Apparantly, it is an connectivity issue with BOE server and from the different blogs it looks like it is a known issue for long.
The proposed issue resolution were like either CR2008 should be SP2 with BOE SP3 or there should be some additional .dll files defined in the paths in case of MSSQL database. None of this applies to us as we are on CR2008 with SP3 and going back to SP2 is probably not a viable option for us, and we are using Oracle as underlying database in this specific case.( i would like to tell you here that we are able to connect to Oracle Database directly though).
We have raised a message with SAP and was just wondering if we do have some solution/workaround already available to this known issue in place please?
Thanks&Regards.
Edited by: AMIT GHILDYAL on Aug 1, 2011 2:41 PM
Edited by: AMIT GHILDYAL on Aug 1, 2011 2:44 PM
Edited by: AMIT GHILDYAL on Aug 1, 2011 3:14 PMHi Amit,
Moved to Universe Forum.
If you have a case logged then no point posting here also, this is a public site and not a case management tool.
Once you do get the solution from your case please post it here also to help others if they have the same problem.
Thank you
Don -
I have a MacBook with Snow Leopard 10.6.8. The last few weeks it has been constantly dropping internet connection, and one of these messages appear on the page: "Safari cannot open this page because the server where this page is located isn't responding" or "Safari cannot open this page because you are not connected to the internet" comes up. I will check Wifi and I am connected. No wifi connectivity issues with iphone or windows 7 laptop, this doesn't happen with either of those devices. I have unplugged and reset router, cleared cache, still happening. Any ideas? Thanks in advance.
Hi BCLor!
Try using the suggested steps in the following article to help you troubleshoot this issue with your Wi-Fi connection:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
Connectivity issue with ipad 3
anybody having connectivity issues with new ipad 3?
mine won't connect to wifi.
when i switich to cellular 4g lte, that doesn't connect as well.
my macbook pro and iphone connect, with no prob.
i get various can't connect to server messages.
took to genius bar, we erased and rebooted, it worked for a bit but happening again. genius bar staff claimed it was a corrupted file, but i think its more than that?
any thougths?
many thanks,
-LLook at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
SFTP connection issue with Dreamweaver 2014
I have a very weird SFTP connection issue with Dreamweaver CC (2014). I am on a Mac running 10.9.4 and have no problem connecting to my server through SFTP with Dreamweaver CS 6. However, using the exact same settings on CC (2014), I get the following error: "An FTP error occurred - cannot make connection to host. Your login or password is incorrect. Please check your connection information".
I am truly at a loss here. Command line connection works without problems.
Any thoughts?Hi there,
Try after rebooting your system or in a different user account on MAC.
Is there any limit with number of login sessions with your SFTP?
Could you check with Filezila or similar FTP client and connect to your site, see if you get any error there?
Thanks. -
SQL Developer connection issue with JDBC
Hi skutz & friends,
I have problem with Oracle SQL Developer I can not connect to any oracle db
because Status : Failure -Error loading native JDBC driver library.
However, I download SQL developer [ Oracle SQL Developer for Windows (JDK1.5.0_06 is bundled in this zip) ]
After it is not working. Also I download JDK 5.0 Update 14
The Java SE Development Kit (JDK) to install it on my PC again.
But it does not work. My install path information:
install path as C:\Program Files\SQLDEVELOPER_INSTAL\sqldeveloper
local oracle as !0g 10201
SQL version as sqldeveloper-1.2.1.3213 which download last versionfrom OTN on 2/18/2008.
for connection, taken basic.
port as default 1521
hostname and saver name are same.
I created a environment variable in window xp.
SQLDEVELOPER_USER_DIR AS C:\Program Files\SQLDEVELOPER_INSTAL\sqldeveloper
can anybody help me with this connection?
thanks
JimmyDuplicate thread: Please enter all responses on other thread: SQL seveloper connection issue with JDBC
-
I just updated the software on my iMac to OS X version 10.8.5. Now I am having repeated connectivity issues with the wifi in my house. This is the only device that is having these issues. My phone, ipad and tv are not having any problems at all.
It happened immediately following the update. I was sending emails and browsing before the update without a problem.
from apple:I had a message like that last week - only it asked what browser I would be using - I just quit safari - purges caches etc - and at that time noticed I was getting RSS feeds through PUBSUB - tracking them down to the top sites view I never use - I deleted all of the top sites (most of which I don't go into so it must have been a preset) that included MSN and Google - I don't use google so that was pointless. (deleting a top site means you are blocking it from that page) Have not had the message since so it must have had something to do with top sites activity.
Just a note: Did see somewhere probably BBC tech - that Google was going to stop supporting older web browsers. -
iOS 5.1 or iPhone Configuration Profile 3.5 for Windows has not fixed the issue with apply Proxy Settings via a Configuration Profile. Has anyone else got the same issue? Are Mac users got this issue?
This seems to be working for me now but will keep monitoring it the next couple of times I use it to make sure its not a one time thing
-
Hey all,
Has anyone in the Tampa, FL 33629 area had connectivity issues with their FIOS services? My current setup is a Motorola modem that is plugged into a D-Link Router that was provided by VZ. At the D-Link located outside of the house the connectivity light is flashing red and according to the legend it indicates that it has passed the test but is having communication issues. This has been occurring over the past few weeks. The first call to customer service, after diagnostics where run and the outside unit was unplugged and battery were removed as well as all modems and routers being reset, the service rep scheduled a tech to come out. The next morning it seemed like everything was back to normal. Since then we have had intermittent service and I am currently without phone and Internet access (bundled the phone, TV, and Internet) for a couple of days due to their internal service report and dispatching system being unavailable. Just curious if anyone else has encounter this issue.
Thanks,
JBMessage Edited by CPUGuy on 05-04-2009 06:23 AM
Maybe you are looking for
-
APEX is not working after upgrade from 2.3 to 4.2 in Ubuntu
Hi all, i updated my running apex which i had installed with the 10gXE Version on ubuntu (9.04) and which was running fine I need this maschine for trainings and it was requested to update it. So i load the apex4.02 and installed like described als m
-
How do I create podcast links that open automatically in iTunes?
I want to create different podcasts and distribute them via emails to my friends. I want to make it as simple as possible, so that my friends can click on the link to my feed, and have iTunes open automatically, and subscribe to my podcast without ta
-
Payment file duplication in target system at F110 transaction
Hi All Payment file duplication in target system. Wherein since the Print Job was scheduled twice by user, the duplication of payment had taken place.The payment medium program u201CRFFOAVIS_FPAYMu201D is use to control the generation of duplicate pa
-
Alarm for a specific event and time
My alarm works just fine, if I set it to ring like an alarm clock. The problem is that from time to time if I enter a specific time and event, it will not alarm. For example: 9:00 AM. Phone home The alarm indicator will be checked in the preference
-
Question about Chart in WAD ?
Hi everybody : i have designed a query about data for every year , and each year has some months , but not every year has integrated data for every month ,it means there have some years only has data less than 12 months. then i must prepare a chart