HCM Business Events Attendees
Hello experts,
I have to create a program to obtain all the attendees of a Business Event in SAP HCM, now I am familiar with PNP Logical Database but not with PCH Logical Database, and as my approach should be from the Business Types and Events(Objects Types and ID's) I need to include PCH to my Report in the Attributes, now can any one help if I have an Object ID how can I obtain the pernr's of all the attendees after the statement "Get Objec."?, any sample code would be great, thanks in advance for your your answers.
Regards,
Julio
Hi Julio
It's very similar to how you use PNP. Here you need to declare the infotypes 1001. So after GET OBJECT, the P1001 internal table would be filled with all the relationship for the Business event available in HRP1001. If you have entered the business event, make sure you put the relevant filters to get the employees based on the relationships (Pre-booked, Attended, Cancelled etc.).
You could also use many std. reports available in information system for this purpose like tcode S_PH9_46000434 and many more.
Regards
Ranganath
Edited by: Ranganath Ramesh on Dec 1, 2011 9:11 PM
Similar Messages
-
Training and event management: Book Attendee List for Business Event List
Dear all,
I know this:
PV07: book attendee list for business event
PV08: book attendee for business event list
Is there a tcode to book an attendee list for a business event list
Thanks a lot in advance!Hi Federico,
I think.., no. Below are the tcodes available to book attendee,
PV00 Book attendee for business event
PV01 Rebook attendee for business event
PV02 Prebook
PV03 Replace
PV04 Cancel
PV07 Book attendee for list for Business event
PV08 Book attendee for business event list.
Let me know if you found tcode for your requirement.
Thanks,
Karunakar -
TEM-Attendee & Business Event Appraisal
Hi All,
We are using SAP 5.0 and implementing TEM, when we try to create appraisal using T-code PV34(Attendee Appraisal), PV33(Business Appraisal) we are not routed to Generate To-Do List screen, instead it is going to a screen where we need to select the Appraiser and Appraiser mannually, which is quite un usual. It will remain same even if I go through Business Event Menu or Attendance Menu.
Any help in this regard is hightly appreciated.
Thanks
Ramakrishna RamadurgamHi.
I have now the some problem. When I run tcode PV33/PV34 the list of the appraisal templates contain not only the temlates for business events and attendees but also for employees.
Did you solve the problem?
If yes, please give me some hints.
Thanks a lot. -
Attendee is not available for business event
Dear all,
After business event sceduled i booked 9 attendees and i try to book one more attendee i am getting errorr message Attendee is not available for business event.
1. Attendee maintained in HR master data.
2. Org management is also maintained properly
3. Minimum capacity in business event is 15 maintained.
Still i am getting problem
Regards,
Jai Ram.Hi,
To day only i created a Business event the attendee is available for scheduled date.
and dates are ok but still i am getting this error only for particular person only..
and he is not schedule for different business event also for the same date.
Regards,
Jai Ram. -
Not able to remove a attendee assigned on business event
Hi,
I am not able to remove a attendee assigned on business event
it shows in tcode psv2. but cant delete it.
points will be rewarded.
thanksHi Vinayak,
I have been tryng to cancel the attendee booking but it is not allowing me to cancel. When i press the cancel button it does not do anything. nor it show any error message. i am unable to understand the reason.
plz help
regards
TS -
Unable to book attendee for a future business event.
Dear Community,
In the training and event management module, i am unable to book attendee for a future business event. ( Using T-code PSV1).
I prebook the attendee for the business event type. And when try booking the attendee, it says ' Attendee cannot be booked.
Attendee is not available for the business event type.'
Any guidance would be helpful.
Regards,
RatiAs mentioned earlier, please check the work schedule of the attendee. The employee might be on leave or is actually not working on this day. I am assuming Time integration is activated here. Check for the Business event type too. There if select checkbox NO INTEGRATION, then you should not find this error.
Try tweaking the days off settings in the same tab in the business event type.
Hope this helps
Best Regards.
Karan. -
Follow up Business Event by specific qualification date.
Hi Expert,
In the follow up business event, I want to transfer qualification to attendee with the start and end date of business event. For example, the business event date is held on 07.05.2007 11.05.2007 and the qualification will be given to all attendees by t-code: PV15. By standard the start and end date of given qualification is 11.05.2007 31.12.9999. My intention is to give the date as 07.05.2007 11.05.2007 instead. Is there any solution?
Here is the background of the question. We migrated the training history record from legacy system in to SAP and stored it as qualification, and start and end date of qualification are the duration of (start/end date) of training course.
Thanks in advance,
ECTSAKCHi,
Sorry my English is not well. I'll tried.
Our training process like this. When any employee who has attended the training course, he/she will be given the qualification according to the particular course. The qualification should be dated the same as the duration of training course. For example, the Techinical English course is held on 07.05.2007 - 11.05.2007. When the courese is finished, the user will do the follow-up activities by using T-code PV15. By default, the start date of given qualification is 11.05.2007 and end date is 31.12.9999. But our intention is to give the start date of assigned qualification as 07.05.2007 - 11.05.2007.
There is any user exit available to do that?
Thanks.
ECTSAKC -
Training & Event Management - Business event appraisal
Dear all,
Wish you all a very Happy new year.
I hve two questions.
1. For e.g. there is one trainer who has conducted many training program in an org and business event appraisal has been performed where there is criteria to capture instructor information. Then how I can get a report for that trainer only. There is one selection criteria in the report of business event appraisal where I can select the instructor(appraisee) id. But it is not working.
2. When there are more than one instructor in one business event, then how attendee appraisal and business event appraisal are done?
3. In training & event mgt is it possible to perform periodic appraisal?
Thanks,
Have a happy weekend.
DanielHi Daniel,
There is no SAP standard report on Trainer wise attendance history for this purpose you have to define the Adhoc query.
When there are more than one instructor in one business event it is a tough scenario to have attendee appraisal .
In TEM it is possible to have periodic Appraisals.
Warm Regards,
Kapil Kaushal -
Business Event Appraisal - Not showing in PA30
Hi All,
We are implementing TEM on SAP 5.0 and replaced the old appraisal system with new appraisal system.
I have prepared the Appraisal for Business Event, by selecting Attendee as appraiser and Business Event as Apraisee, the problem I am encountering here is after the preparation the document is not shown in any of the following areas in PA30 for infotype 25.
1) Appraisal where Apraiser
2) Objective setting & Appraisal(Open)
But the Appraisal templates which are created under Personnel Appraisal(in PHAP_CATALOG), is shown but not the Appraisal templates which are created under SAP Learning Solution(in PHAP_CATALOG).
Is there any configuration inorder to get this done?
Any help in this regard is highly appreciated.
Thanks
Ramakrishna RamadurgamLincoln,
Can you be precise, I mean which Integration settings your asking me to look into?
One thing I noticed while debugging the code, it is getting Add On Application as 'PA', and passing this parameter to get the Personel Appraisal templates, in case if I modify as 'PD' in the debugging mode, it is fetching the Business Event Appraisal along with Personel Appraisal. Is there any setting for this to have PD passed in to the Add on Application variable.
Thanks
Ramakrishna
Thanks
Ramakrishna Ramadurgam -
Business Event Appraisal Form in New Appraisal System
Hi,
I have created Business Event Appraisal Form in New Appraisal System. I have done Appraisals for one Business Event by an attendee.
Where can see this Appraisal Document of Business Event and do any change if required. Or from we can delete this documents of Business Event Appraisal.
I have tried tcode appchange but there only Personnel Appraisal templates are visible.
SamriddhiHi,
If you are using a template created by using the Objective Setting and Appraisals componet you can view and maintain forms filled in by employees via Transaction phap_admin_pa.
Br,
Art -
Business Event Content.in TEM
Dear All,
When a Business Event is created in Training & Event Management module, we find that there is a
an option called " Further Information " to enter CONTENS of the Business Event. I would like to know the significance of the " CONTENTS " data entered here.
I would also like to know if we can call this data in the NOTIFICATIONS which will be sent to an Attendees.Is it possible? If yes what is the procedure to configure this scenario?
Regards
Jai Ramtry recording and uploading data via LSMW.
-
Creating Business event in training and event management
Hi Gurus!!!,
can you please instruct me the steps involved in creating business events in Training and Event Management.(HR Module)
Thanks and regards,
ProsperHi Prosper,
You need to configure lot of settings, prior to Business Event, because one BE is based on various elements like Location, Attendee type, Instructor, Fees, Resources, Time Schedule, Services, BE type, BE Group.
After configuring all these for BE type, you need to create a BE for the BE type. Then, you can go for day to day activities like Booking, Pre Booking, Cancellation.
I hope, this link will help you
http://help.sap.com/saphelp_47x200/helpdata/en/26/865738c185f50ce10000009b38f8cf/frameset.htm
Good Luck
Om
Reward it, if u feel helpful. -
Creation of Business Event Type
Hi
We have already created a Business Event Type called Safety Refresher. Actually this training will happen every month. already created Safety Refresher and again trying to create its showing business event type already exists. Now i want under safety refresher is it possible to maintain month wise for the whole year or particular perilod.Hi Suraish
You have not to create Business Event Type again and again. You only have to create new Business Event only under the said business event type. Use copy function and copy the previous business event and assign a new Schedule for the next month, also assing resources if required and then you can book the attendees against that new business event.
Regards
Rao Imran -
Missing iView for Business Events in MSS 1.31
Hi,
We made an upgrade from ERP 4.7 to ECC 6.0, and we can't find the iView "Business Events". Do you know if this service still valid in the version 1.31 of MSS?. In the previous version the tecnical name of the service was com.sap.pct.hcm.eeprofileeventdetails.
Thanks in advance.
Kind regards,
Carlos.Hi Carlos
I think this is now part of the SAP Learning Solution - at least delivered iviews in MSS require
Learning Solution infotypes to be populated
The equivalent in ERP2005 would be
com.sap.pct.erp.mss.personneldev_trainingactivities
Best wishes
Stuart -
Hi Experts,
I need help regarding TEM - Business Events.
In the Dynamic Attendance Menu (PSV1) interface, when I check for the Attendee List, the Cost Center column does not appear.(Cost center of each attendee) How do i make it appear? This is also the case when I use report RHXTEILN.
The attendees were booked using Booking with Allocation, so the fee and the cost center is already recorded.
2nd Problem
An emplyee was in the same BE but when I looked it up on the Attendee list, the record of the employee under column ∑Bookings is 0. All the others are 1.
The fee is also 00.00. What could have gone wrong?
Thanks. Point to those who can help.
Regards,
NoobHi Zsolt,
Thanks for your reply. Problem no. 1 is solved.
2) When you right-click on the business event where the employee was booked, there is an option called "Attendee List". When you chose this option, the list of Employees booked for that particular Business event is shown along with the columns Attendee Name, ∑Bookings, BP, Booking Date, Org Assignment, Cost Center, etc.
Under ∑Bookings column one attendee has a "0", all the other attendees has 1. What are the possible cause of this?
Also the number of booked attendees is counted incorrectly. Even if there are only 4 booked persons, 5 are displayed since the booking of 1 person is not counted. (value is 0)
Maybe you are looking for
-
Any ideas on how to save a download to a document folder? I have tried to "save as" and "move to" documents from the desktop, but the same message appears. Please help!
-
Question regarding Portability and transfering my number
I am thinking about buying a boost mobile no contract phone and ending my contract/service with Verizon. My question is if I want to keep my original number and transfer it after buying the new phone, do I need to purchase the phone at a store in tha
-
Dynamic data select from table is giving dump
Hello Experts, Below statement is giving Dump after it move all the data in my dynamic table. When i see in debug. All my recored are avilable in <T_TAB> Table. SELECT * FROM (pa_tab) INTO CORRESPONDING FIELDS OF TABLE <T_TAB>. > IF SY-SUBRC = 0.
-
Context-sensitive WebHelp topics opening in new tab not window per browser default
hello everyone. i am generating WebHelp using Robohelp 7. the developer i am working with is new to WebHelp but got the idea pretty quick. i generated a map and he set up the help link to call the correct topic from the application. at first he coul
-
Hi Friends, I have created saperate Item Categories for BOM relating to Billing Plan. In Higher and Lower level Item categories I maintained Billing Plan 01 and Billing Relevance "I", Order relavent Billing-Billing Plan. I created order and maintaine