HCM changes to be passed to different vendors.. how to?

Hi guys,
This is a HCM technical question...
WE have the current implementation where we are implementing the benefits HCM sub module. The requirement is. we want to send across the benefits / family (0021 IT) information to other vendors when there is a change in this information.
For example, if an employee changes his family and memeber information through ESS, we want to pass on the changed information. Similariy we want to send across information when an employee enrolls in a benefits plan.
What is the best way to do it techincally. Is there a user exit after the data is saved, that can be used to automiatically send the information to external sources.. ( i did not see/find any user exits atleast in PA30 after the data has been saved )
or do we need to enable infotype logging and then send across a file daily to external vendors?
or is there any other mechanism to do this. Am sure that this is a common scenario and whats the best way to do this
regards
Gogol

chandra / Manual,
i was also thinking on similar lines. Just one quick question, how can you trigger as soon as the changes are saved?
We are on ECC 6.0
Chandra can you let me know what needs to be done to trigger the idocs real time to the external vendors.
OR external vendors are mostly non-SAP
regards
null

Similar Messages

How to track cost for different Vendors through SAP PM

Hi
Maintenance needs to discuss with SAP PM Consultant for tracking the different vendor for civil, painting and external services jobs from asset locations and class. It means that total expenses of Civil, Painting and external services jobs for different locations should be easily gathered.
Also ,As temporary solution of identifying posting for different vendors, how maintenance will be able to find actual amount posted for different vendors
Regards
chand

Hi
can you tell me where we can make control
When RFQ is created the PR is not allowed to change when the PR is manually created & it is working perfectly.
but when PR is created thorugh work order then even if RFQ is created/released it is allowing to change PR when created throogh work order
Please tell me where is control
Regards
chand

Excise paymet to different Vendor

Dear All
we have one scenario as follows
Purchase Order to be created for main vendor ,But excise duty to paid to Different vendor . how to map the same .
Regards.
Advait

Hi,
Try to maintian the vendor in the excise condition details for all the conditions.
When you go for invoicing system should give you a pop up asking for which vendor to be invoiced.
Select the relevent vendor & post invoice.
regards,
Akshay

In MIRO system showing different vendor other thar PO

Hi
During Invoice booking in MIRO, system is showing different vendor other than the vendor in Purchase order.
As a result different vendor other than PO vendor is getting credited.
We have checked below settings.
u2022 Partner roles in vendor master record is not changed
u2022 Partner Roles in PO is not changed
u2022 Invoicing Party field in details tab in MIRO is greyed out hence user can not change it
PO has not been changed as per change history.
Please guide me as what can be the possible reason for this.
Thanks & Regards,
Vivek

Please consider this scenario,
1. Suppose you have two PO ( A & B) with different vendors and you want to do the invoice for the PO A for Vendor X (say).
2. So you have entered the PO number B and then realised that the wrong PO number has been specified.
3. So without coming out of the transaction or without executing new transaction, you entered the PO number A.
4. So the item details will be taken from the PO A but in this case the vendor details will be of PO B becoz the header details will not change until you will not come out of the screen or transaction.
This is the reason for getting the wrong vendor against the PO.
Solution for this issue:-
1. Cancel the invoice and redo the invoice for the PO.
2. Pass the JV from one vendor to another vendor.

Unplanned Delivery costs in MIRO for different Vendor

I have an annual PO and I invoice it with normal MIRO transaction.
At the same time I have one service which I want to be a unplanned delivery cost for this PO. This service will be assigned to the material account and it is for a different vendor.
Can I do it in MIRO creating only the value in the unplanned delivery cost and insert a different vendor? In OBYC this is assigned to UPF category.
Can you please help me?

Hello,
You can use transaction MIRO to do unplanned delivery costs.
You use "Subsequent Debit" and insert the PO number (equal to invoice). The system will show the lines of the PO that were already invoiced and in the tab "Details" you should change the Invoice Party and inser the value of the unplanned delivery costs in the field "Unpl. Del. Csts".
If you don't have the costs in the PO for different vendor you must create like this...with Subsequent Debit. Only if you have planned costs in the PO it is possible to do it invoice and costs in the same document for different vendors otherwise you must have 2 documents (invoice for the material vendor and subsequent debit for the other unplanned costs vendor).

Different vendors in freight condition type error in MIRO

Hi,
We are using different vendor in condition type for import purchase order as given.
Ordering Vendor - 800000
Custom Vendor - 900000 in condition type
Freight Vendor - 700000 in condition type
While i am doing Goods Receipt, In the Freight tab only ordering and freight vendor is showing. And at the time of MIRO all three vendor are showing for selection.
Question: So is there any restriction for condition type. And if i change vendor at condition type after MIGO what will be effect on MIRO.
We are using GR Base Invoice verification.
Thanks in Advance.

Hello Venki,
While doing Customs MIRO, please select from the drop down as 'planned delivery cost' option. Once you select this, then you can find your customs vendor flowing from PO.
Hope this helps.
Vikas.

Different Vendor in condition type

Hi,
   We are using different vendor in condition type for import purchase order as given.
Ordering Vendor - 800000
Custom   Vendor - 900000 in condition type
Freight    Vendor - 700000 in condition type
While i am doing Goods Receipt, In the Freight tab only ordering and freight vendor is showing. And at the time of MIRO all three vendor are showing for selection.
Question: So is there any restriction for condition type. And if i change vendor at condition type after MIGO what will be effect on MIRO.
We are using GR Base Invoice verification.
Thanks in Advance.
Ashish Panchal

Hi, For Import PO, you need to follow the following standard process for all Indian scenario,
>>You should have different Pricing Procedure, with all the Duties conditions defined.
>>Import Vendor, with import currency
>>Different Document type for import PO, in the PO for the Customs conditions give the Customs Vendor code.
>>In PO tax code to be Zero or Nil %, & u201CGR based IVu201D tick to be removed from Invoice tab
>>Do MIRO for Customs Vendor before doing MIGO
>>After doing MIRO do GR for the Item (in MIGO you will get popup for the MIRO document done, excise details from this is populated in to the PO )
>>Just refer to below link for Import purchase case for some more understanding,
Excise invoice not getting converted into INR from USD for an IMPORT PO

Different vendor during invoice verification

Hi All
In my testing I came to know that the system is allowing any vendor as different payee in MIRO screen irrespective of PO vendor and even i am able to post the document without any error or block.
I don't have any partner functionality.
There is no frieght vendor maintained.
company codes used are correct.
Please can any one of you tell me how to control this?

Hi Lokesh,
I have not explained Partner function at all.
I have explained Std. functionality of MIRO. That means, you can change the vendor at the time of MIRO.
Now coming back to your question, how can system picks-up different vendor at the time of MIRO at each time?
Same vendor code or different vendor codes at each time?
Have you maintained difference vendor code in Head Office?
Bye,
Muralidhara

Invoice for different vendor

Hi,
I have created PO for XYZ vendor and when I create Invoice it goes on different vendor as ABC. and it is not regular its happening some time.
please suggest me why it is happening.
Thanks
Shital

Hi
check your vendor account group for both vendor number for which its happening and vendor for which its not happening
it might be you have took different account,than regular ,for which vendor partner function active
If its active for all account group the, check in vendor master record you have assign any invoicing party vendor in partner function
if its correct
then check you Po header partner tab,user might change it in PO
Regards
Kailas ugale

Change the issue quantity for different plants

We are facing a problem in the following issue.
A material is being used in two plants. The material is procured from vendors in packets. The pack quantity varies for each plant for the same material since it is procured from different vendor. The base unit of measure for the material in the material master is maintained as NOS and the unit of issue is PAC. The alternative unit of measure in the material master can be maintained for only one PAC. If the pack quantity varies for different plant, how to maintain in the material master.
For example : -
Plant I u2013 Vendor A u2013 Pack quantity u2013 200nos.
Plant II u2013 Vendor B u2013 Pack quantity u2013 300 nos.
While creating reservation in plant II for one pack, the stock keeping quantity is 200 nos. On issue the issue quantity is 200 nos, but our requirement is the system should issue 300 nos. Kindly give solution to the problem.

Hy afzal,
I don't think it is possible to maintain different Conversion factor for 2 different plant for a single material.
Acording to me there is 3 way to comeout of this problem.
1) Create different Material codes for both plants.
2) Insted of using alternate unit of measure use Batch specific unit of measure.But for this Materials are Batch Managed.
[Batch Specific Unit of measure|http://help.sap.com/bestpractices/BBLibrary/Documentation/Q24_BB_ConfigGuide_EN_US.doc]
3) Try to convince one of the vendor to change its packing qty/Packet.
Regards,
Dhaval
Edited by: Dhaval Choksi on Jul 31, 2008 11:25 AM
Edited by: Dhaval Choksi on Jul 31, 2008 1:26 PM

My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve .....

My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve this issue. I have tried resetting it but nothing... Either I'm doing something wrong or....

I believe the issue is with the Apple ID that was used to purchase the App. If you download an App that was purchased under a different Appple ID then all updates will also be linked to the original purchaser's Apple ID. Your Apple ID is the the same ID as your iTunes, iCloud, etc. Some folks use different ID for the different Apple sites. No need for that One ID for all Apple Sites, and if someone else buys an App using their ID and they(you) download that App onto your device and that App requires an update it will ask for the purchasers Apple ID. This happens a lot when folks sell their iPad or give it to someone else and leave some purchased(free) Apps on the iOS device. You cannot change the original ID the App was purchased under. A suggestion would be if someone else has an App that you like but do not want to pay for use their ID or in the future have them gift the App to you.

What is the path or TC for changing control of recon account in vendor

Hi Gurus,
Pl tell the TC or Path for changing the reconciliation account control for vendor as like in asset recon account.
Pl itsUrgens
Thanks in advance

Hi:
What i guess from your requirement that you need to control the field Reconciliation account, some users should be allowed to change the recon account and other should be restricted from doing so? If i am right then you can do that easily with the help of BASIS guy. F_LFA1_AEN Customer: Change Authorization for Certain Fields will do the needful for you.
Ask your Basis consultant to implement authorization's checks against F_LFA1_AEN for this Transaction code for the user profiles as desired by you. Before that do the necessary customization in SPRO as follows:
Define your change groups in the task level menu of Financial Accounting >A/R & A/P -> Credit management -> Define Field group-> Assign Fields -> Groups.
While assigning you can find the field LFB1-AKONT . Your issue will be resolved.
Regards

GR and IR from different vendor??

hi experts
Can anybody give some idea to how to go about the below scenario.
I have to create 1 PO to x vendor for 100/ea quantity.
X vendor he 'll distribute the same some 50 vendors and advised to send materials and invoice to me with ref to 1 PO.
So, i 'll be doing GR and IR from 50 different vendors lik per vendor 2 quantity . ( Like third party).
By keeping reference of 1 PO , i have to do GR and IR for 50 different vendor .
Any suggestion and solution in SAP.
Thanks
SAP-MM

Hi,
U can acheive this via Partner Function.
There U can give the ordering Address(OA) and Good Supplier(GS) as different vender
and PI(invoice Party) as one vender.
Suppose you get material from different vender and Invoice from other vender.
Hope Help U !
Regards,
Pardeep Malik

One MIRO document with two different vendors for two different line items

Can it possible to make MIRO for a PO which is having two conditions(Basic price+Freight) with two different vendors.
MIRO document needs:
GR/IR Clearing    Dr.
Freight Clearing Dr.
Vendor RM(X)         Cr.
Vendor Freight(Y)   Cr.
Is it possible to post the above document at a time not individually for each condition.

Hi,
Yes, It is possible to post Material and delivery cost in one document.where in material supplier is different than the Frieght vendor.
Itm PK BusA Acct no.   Description                    Tx     Amount in   USD
001 89       130001     Stock-Ingredients               244 0            880.00
002 96       320001     GR/IR Account - Ing.            244 0          1,200.00-
003 86       520002     Ingredients - PPV               244 0          3,297.87
004 50       320008     GR/IR Account - Duty            244 0            797.87-
005 50       320009     GR/IR Account - Fre.            244 0          2,180.00-
Thanks
Dinabandhu

One PO for two different vendors

Hi Experts ,
My Questions are ......
Can we maintain two different vendors for two different materials and create one PO ? ;
How does it work ?
How is it sent to different Vendors ?.
Will the vendor receive one general PO containing all line item materials from different vendors...or Each vendor will receive his own line item PO (PO Split)...
Regards
Albert

Hi Albert,
Your qns-
Can we maintain two different vendors for two different materials and create one PO ? ;
Yes you can maintain 2 different vendors for 2 different materials. But you cannot create a single PO (i.e. PO with same number) for 2 different vendors. I do not understand why you want to create one PO for 2 vendors supplying different materials. Can you please explain the logic for it?
Vivek

HCM changes to be passed to different vendors.. how to?

Similar Messages

Maybe you are looking for