HCM form hangs

Hi everyone. I am encountering a problem with Adobe forms within the HCM Processes and Forms framework. I am not able to press the check and send button because of the never ending hour glass symbol. The form just seems to hang. This is not related to the hanging problem before when you press check and and send button then the form hangs. This has been fixed. In this case, I cannot even press check and send.
I created the form using ALD 8.0 and tried to open in the portal using Adobe reader 9.0 and 8.1.1 but the problem still persists. What is strange is this is not happening to the standard forms like Birth of Child etc... There seems to be no problem with my custom form as I also tried it using a blank form and it still happens. The Form Wide ISR scripts and ZCI scripts have already been embedded into the form.
Could it be because of ALD 8.0?
Does anyone have any ideas of what's wrong?
[IMG]http://i576.photobucket.com/albums/ss206/alexanderb522/HCMhanging.jpg[/IMG]

Hi Chris,
I have read your blogs before. Great work! However, this is not the problem I am encountering. I was able to fix the bug you described that occurs when you press check and send. This was fixed by upgrading from ECC 6.0 patch 12 to 19.
I am experiencing a different problem where I cannot even press the check and send button. It does not hang on the form i.e I can enter data but if I move my mouse outside the form into the surrounding web dynpro component there is the never ending hour glass that does not let me press the buttons on the web dynpro component.
I think it may be related to the version of the script installed...
Any ideas?
Thanks!

Similar Messages

HCM form hangs on some machine

Hi,
We are having problem that HCM forms hangs only on certain machines. Its spins forever. No standard or custom event can be submited. Exactly same forms from the same location works fine on other machines. it looks like setting on some machines blocking request.
Does anyone have any ideas of what's wrong?
Thanks,
Oleg

We also did some client trace and on the client machine we see the trace
15:07:43.879 Got a message from Adobe Reader: log 1: error: Adobe Acrobat Professional: 2010-02-15T20:07:43.859Z: Error installing message handler: message:HostContainerDisclosurePolicy is not defined fileName:Doc:Init lineNumber:769 stack:RegisterMessageHandler()@Doc:Init:769 RegisterMessageHandler()@:0 @XFA:data[0]:ready:13 name:ReferenceError 2: 3:
on the working machine instead of this we see
15:12:27.925 Got a message from Adobe Reader: zciReady 1: 2: 3:
also then on broken one we see
15:07:44.631 onError: number: 0 description: message: Target document not disclosed. name: MessageDocNotDisclosedError
Any idea what might cause this kind if error on some machines.
Thanks,
Oleg
Edited by: Oleg Sokolov on Feb 15, 2010 9:17 PM

Issue with SAP_PD Service in HCM Forms

Hi Experts,
I am facing this issue when trying to create/update a Position using HCM Forms.
We have the HCM_ASR_CL_2 Business Function Activated
We are on EHP4.
I am trying to create/update a position using forms - SAP_PD Service and facing the below mentioned issue -
When I am trying to add the Object Type S in the LEAD_OBJECT_ID, I get the error - Object type S not supported.
As a workaround that I got from a help.sap - 3.In the navigation pane, go toValidity Period.Enter Start Object Type as S = Job, enter Application Type as PD. - Even this workaround doesnt work!
Am I missing some config here?
Also, once we activate the Business Function - do we get the node for SAP_PD in IMG just as we have for SAP_PA and SAP_PT service?
Please help!!!
Thanks

Any reponses?

Return function module result to HCM form using backend service

Hi
I'm trying todo something very simple.
I would like to call a FM using a backend service and return the result of the FM to the HCM form.
I'm using USER_EVENT_CHECK on button to initiate the call.
Here is my dooperations, I have omitted the calling of the FM. I just want to return the changed text to the form in this example.
I have stepped through code using external breakpoint and the field gets changed succesfully in the service_dataset
method IF_HRASR00GEN_SERVICE~DO_OPERATIONS.
DATA service_operation_wa TYPE hrasr00genserv_operation.
DATA service_dataset_wa TYPE hrasr00gensrv_dataset.
DATA dummy TYPE string.
DATA message TYPE symsg.
FIELD-SYMBOLS <service_dataset_wa> TYPE hrasr00gensrv_dataset.
DATA inputText TYPE string.
LOOP AT service_operations INTO service_operation_wa.
    CASE service_operation_wa-operation.
      WHEN C_CVRT_OPERATION_NAME.
        LOOP AT service_datasets INTO service_dataset_wa WHERE fieldname = c_oldText_fieldname.
          inputText = service_dataset_wa-fieldvalue.
         MODIFY service_datasets INDEX sy-tabix FROM service_dataset_wa TRANSPORTING fieldvalue.
          exit.
        ENDLOOP.
        LOOP AT service_datasets ASSIGNING <service_dataset_wa> WHERE fieldname = c_newText_fieldname.
          EXIT.
        ENDLOOP.
        IF sy-subrc = 0. "entry found; must not necessarily exist
          CONCATENATE inputText '-TEST-' inputText INTO <service_dataset_wa>-fieldvalue.
        ENDIF.
    ENDCASE.
ENDLOOP.
endmethod.
Any help will be appreciated.

You could use 'CU_READ_RGDIR_NEW' to get payroll directory RGDIR, 'PYXX_READ_PAYROLL_RESULT' to read results (RT, CRT, ...) from specific entry in payroll drectory.
Rgds.

Error: Organizational Assignment created via Orgnizational Management in HCM form

Hi All,
I am getting below error while moving an EE to certain position via HCM form.
I have cheked and found that if an org unit is to be assigned to another cost center in Organizational management from a certain date, this action generates a new record in infotype 0001 for integrated persons from the date of assignment to the new cost center and if we perform any action which would be deleting the new record (created from OM) in IT0001 then this error would populate.
Here is the the same case a new Cost Centre has been assigned with the orgunit and a new record is creaed in IT0001 from the OM but when I am performing the same action via PA40 then I not getting any error, the error is occuring from the form only.
Can you please help me to resove this error and provide me the reason why it is not occring when I am performing the same action from PA40.
Regards,
Mayank

Hi Mayank,
I think you will be triggering Job Salary Form for the action you have mentioned. Please check in the Tcode HRASR_DT for the form name as I have show below from my development system. In Back-End services - SAP_PA - Infotypes and Operations and for Infotype 0001 check what is the operation that you have maintained.. It should be "change" to avoid the error message.
For PA40 action you would have configured the same as "change" thats why you are not getting error message in PA40.
Thanks,
Sriram

How to Edit a custom HCM form directly after Employee selection?

Hi All,
As per the requirement, the Manager should have a tab in Portal called "Forms and Processess" and on click of that he should see a Page with few hyperlinks . Each hyperlink is the name of a HCM Form.
So, the Manager will click on one of them to start a particular form. ex. One time payment
After clicking, he should have the Employee search result having Direct reports under STEP "Select Employees".. But the next STEP has to be "Edit" instead of "Select Process" and the Form "One time payment" should directly Open for him to work on.
Please help me providing the relevant information and the approach. Let me know if you need any additional information.
Regards
DK
Edited by: DIPENDRA MOHANTY on Mar 11, 2011 12:05 AM
Edited by: DIPENDRA MOHANTY on Mar 11, 2011 12:06 AM

we do have selection of employees or search and you can choose a form?
If you want to change it, then only option is WD ABAP Iviews custom
But i still didnt fathom the need of teh approach above, does the standard doesnt meet the requurement? Please check it
which is pretty flexible

Forms hangs when using result of an OUT parameter to do an Insert

Hello,
I think I have slightly odd problem here... I'm currently migrating a Forms 6i client-server application to Forms 10g904. I found that one of my Forms was hanging i.e. screen goes blank, 'activity' bar on the bottom right just keeps whirring away indefinitely.
After much investigation, the hanging-form problem occurs in the following scenario:
- In a routine in a Forms pll library, a variable is declared e.g. w_capture_output
- In the first round of a loop, this variable is passed into a database stored proc, which has an OUT parameter to return a result e.g. SOME_PROC(w_some_input, w_capture_output);
- w_capture_output comes back with a value e.g. 'P'
- This is then used in an Insert e.g. INSERT INTO some_table (a, b) VALUES (1, w_capture_output)
- The next round of the loop; the variable is passed in again into the proc. It still holds the value from the last round e.g. 'P'
- In this round, the logic of the proc is such that the OUT argument is set to null i.e. when the proc has finished, w_capture_output is now null. This can be confirmed with IF w_capture_output IS NULL THEN display_some_message. The code is still all running fine.
- But now when I run INSERT INTO some_table (a, b) VALUES (2, w_capture_output) - the form hangs.
I can, however, work around this and prevent the form from hanging simply by ensuring at the start of each round of the loop that I explicitly set w_capture_output back to null before passing it into the proc that sets it. Or alternatively, after it comes back from the proc, the following also prevents the hanging problem:
w_capture_output := NVL(w_capture_output,NULL);
To summarise - if I pass a variable into a proc taking an OUT parameter, AND that variable is not null going into the proc, AND the proc sets it to null AND I then try to use that variable in an Insert statement - the form hangs. Something horrible is happening to the variable inside the procedure, I think.
Now, I can kind of see why passing a non-null variable into an OUT argument might cause problems (although only if you then try to set it to null - not if you set it to another, non-null value). However, exactly the same code works fine under Forms 6i, using the same database instance and proc. And if Oracle have changed the rules, shouldn't it throw an error, rather than just hanging? I'd prefer not to have to use the workaround, as this is a very large app and I don't know yet how many places would need it.
Has anyone else come across this issue..? (Database is 9.0.2. btw, Forms are 10g904)
Cheers,
James

Try
v_log_name := 'Fnd_File.LOG_OUT';Hey, what r u doing with above code?
You are assigning string value to a variable?
The compilation won't give any error.
And OP thinks it's solution!!!!!!!!!!!
LOL

Attachment Buttons not coming in Task TS17900101 of HCM Forms and Process

Hi ,
We are using HCM Forms and process for changing employee organization unit which is linked with workflow for approvals.
In this workflow we are calling standard task TS17900101 .Till now every thing is working fine but the problem is with attachments as their is a requirement to show attachments button with this Approve and Reject Task. But as per my knowledge SAP has not given any option to attach documents with this task which is however only possibe through TS17900100.
So can u suggest any way to attach documents with Approve and Reject Task which is TS17900101.
Thanks,
Rahul

Hi,
i have the same problem and no idea how to solve it.
Please let me know, what enhancing module pool code helped you
Thanks,
Galina

A particular form hangs while saving in Oracle Apps 11.5.10.2

Hi Friends,
I am using Oracle Apps 11.5.10.2 on Linux.
In a custom Responsibilty ,In a particular form after entering the valuses when i give confirm button the application forms hangs for a long time without saving the values.
Please let me know the Fix.
Regards,
Arun

Hi,
Was this working before? If yes, any changes have been done recently?
Can you find any errors in the Jinitiator Console Window, application log files, and the database log files?
Please verify that you have no invalid objects in the database. Also, try to generate the form via adadmin and see if this helps.
In none of the above helps, please obtain FRD file, and see if more details about the error are reported in the log then -- See (Note: 150168.1 - Obtaining Forms Runtime Diagnostics (FRD) In Oracle Applications 11i) for details.
Regards,
Hussein

Forms hangs after using FileUpload PJC in our application

1) I've successfully tested the stand-alone FileUpload demo form provided by Oracle for moving files from C/S to the middle tier machine. That tells me all the environment variables, etc. are good to go.
2) When i try to use the same demo form from my application using the call_form function, it works till the point of transferring the file to the server. Then when I try to close the demo form by hitting the close button to go back to my application, the form hangs up with no error message either in the Java console or the Application.
3) Even when i made changes to my application to implement the PJC as per the Oracle implementation paper, the same result as #2.
We are using Forms 6i (v6.0.8.19.2), iAS Rel1 (v1.0.2.2.2a) running on W2000.
BTW, the size of the file is 1K. The last message I see in the Java console is oracle/ewt/laf/basic/ProgressBarPainter.class
Any ideas or help appreciated. Thanks.

Hi,
You can try a package named: JTwain, which is available at http://asprise.com/product/jtwain.
JTwain supports all kinds of digital cameras and scanners. You can use Java to access, contorl digital cameras and scanners, and of course, to acquire images with flexible settings.
The developers' guide is available @ http://asprise.com/product/jtwain/devGuide.php
In the simplest case, one line of Java code can solve your problem.
Good luck!

Time taking to open HCM Forms on portal.

Hi,
The entire development of HCM Forms and Process has successfully completed. Now this interactive form is taking too much time to open, for example time taking is from 30 sec to 60 sec. But client bench mark time to open any adobe form is 6sec. Actually does client benchmark is right? Second, how can we avoid this issue?
Regards,
nspkumar.

Nikhil,
Thanks for the response, but I didnot get replacing existing form template with the new one in LiveCycle Designer.
Can you please elaborate in more detail.
Regards,
nspkumar.

Standard HCM & forms Process development using WD4A

Hello All,
We are planning to implement applications of Standard HCM & forms Process using WD4A same like standard create Position u2026etc. to avoid Adobe forms.
Could you please share your advises, suggestions and approach to be followed. Best feasible solutions.
To meet the same like standard solution what are the precaution need to take into the consideration?
Can you any provide how the standard HCM & forms Process technical flow and logic.
Where I can find the technical information of the Webdynpro Component: HRASR00_PROCESS_EXECUTE. If you any please share the same.
Thanks in Advance.
Regards
SS

If i understand you correctly you want to replace adobe with WD4A
it was done here
refer here
/people/brad.pokroy/blog/2010/10/05/web-dynpro-forms-using-hcm-processes-and-forms
While investigating and figuring out the best way to classify a form as a "Web Dynpro form" opposed to an "Adobe form", that was one of the routes I looked into. in transaction QISRSCENARIO I started going the route of a fixed value append to domain QISRDPROCESS_TYPE and adding a new value fixed value 'W' - Web Dynpro Forms. It ended up that it would need a bit more work than just that. And I was advised that much of the data in view V_SCENARIOVERSN was populated automatically via transaction HRASR_DT opposed to QISRSCENARIO, so it wasnt the best way to do it via that field.
Edited by: Siddharth Rajora on Apr 27, 2011 6:03 PM

Using Digital Personnel File for HCM Forms & Processes

Hi,
We would like to use Digital Personnel File for HCM Forms & Processes to save forms and attachments using record case management. For this to be done record case management needs to be customized. Can you provide the steps for record case management customization and integrating digital personnel files with HCM forms.
Regards,
Amit

http://help.sap.com/erp2005_ehp_03/helpdata/en/43/1d63953fce3566e10000000a11466f/frameset.htm
Refer here

HCM form cannot be displayed in Portal

Dear Experts,
We are facing this problem which has stopped us for days.
Recently, in our Portal, the HCM forms cannot be displayed at all. We suspect it is ADS issue. However, both ABAP and Java are working fine in ADS as tested by BASIS team.
Has any of you encountered this problem before? Is there any specific area we need to look into?
Thanks in advance!!
Regards.

false alarm

Opening /Attaching a BDS document to an HCM form (Adobe interactive)

Hi Experts,
We have a requirement to attach a document in the Adobe Interactive form used for Employee recruitment process.
The document will be stored in the user's local machine.
We are using HRASR_DT to design the recruitment process.
We are not able to open the document from HCM form.
Can anybody help us resolving the same?
~BiSu

Hello,
I don´t understand when/who/how do you attach files. I also don´t understand what does not work: who cannot read the attachments? The machine/SAP system or the user? In the step after the step when the attachments were attached? Orin any stpe? Please elaborate a little. This seems like a difficult problem (at least for me) and any additionl info could help a lot here.
Regards Otto

HCM form hangs

Similar Messages

Maybe you are looking for