HCM form not working.

Hi Gurus!
I created a new HCM process and designed an Adobe form. The form is linked to the Process and found to be active. But, when I open it from the web dynpro application
( asr_process_execute ) , the forms is not getting displayed on the web page. But, I can see other buttons like 'Check and Send'. Is there any other setting which needs to be done to display the Form?
Thanks in advance!
Mahesh

Hi Marcus,
I checked SLG1 and it says the following error.
Work item 000000000000 cannot be read
Message no. WL803
Diagnosis
The work item with the specified ID can either not be read completely or partly (for example, its container).
System Response
The action was cancelled and the work item, if it still exists, set to error status.
Procedure
Check whether the work item has already been deleted or whether only parts of it can no longer be read.
In the latter case, the work item is inconsistent.
Refer to your workflow system administrator.
I am not able to understand why this message is appearing. My HCM process is linked with my wokflow template.
Also, SWEL says no event trace. That means my workflow is not triggerred.
What could be the issue?
Thanks,
Mahesh.

Similar Messages

Custom Master Detail form not working In EBS

Custom Master Detail form not working In EBS
Hi all,
I have two custom tables -- 1) XXX_DIE_Headers
2) XXX_DIE_LINES
I developed a Master Detail form based on above tables. XXX_DIE_Headers is the Master Block (Single record) & XXX_DIE_LINES is the detail block ( Multi line block ).
Yes, I used Appstand,Template.fmb for developing this form. The Master block has three fields out of which Two are required fields and i have given initial value for them.
As i deployed it in APPS(EBS),everything about it is working fine (insert,delete,master-detail behaviour) except querying.
When i press F-11 , It pops up a message "Do you want to save changes you have made" Choice - yes,no,cancel.
I don't want this message to pop up.
The scenario is :- I open the form.( without entering ) Press F11 . The message Pops up.
Please give me suggession on how to work it around so as form directly goes to query mode ,without popping the message.
regards
ravi

It seems that you are changing a database value in your form, do you have any changes in WHEN-NEW-FORM-INSTANCE???
what the form is trying to tell you that you have changed something, do you want to save it?
I suggest you debug your form and see what's happening step by step.
Tony

So does Flash Forms not work in Safari?

Does Flash Forms not work on Safari Browser? I have them on
my site but when I try to look at them in Safari, they don't work..
Or do I need to just add some type of extension to my Safari
Browser to View a Flash Form?
Here is the page. it won't work in Safari.. unless I"m
missing an install extension. I just downloaded the browser for
Windows for the first time today and so I wanted to check my site
in that browser.
http://www.jimmyharrell.com/contact.cfm
is the page in question.

yes but still no luck. When you go here do you see my flash
form load in Safari? I'm using Safari for Windows not mac.
http://www.jimmyharrell.com/contact.cfm

Does Flash Forms not work in Safari?

Does Flash Forms not work on Safari Browser? I have them on
my site but when I try to look at them in Safari, they don't work..
Or do I need to just add some type of extension to my Safari
Browser to View a Flash Form?
Here is the page. it won't work in Safari.. unless I"m
missing an install extension. I just downloaded the browser for
Windows for the first time today and so I wanted to check my site
in that browser.
http://www.jimmyharrell.com/contact.cfm
is the page in question.

yes but still no luck. When you go here do you see my flash
form load in Safari? I'm using Safari for Windows not mac.
http://www.jimmyharrell.com/contact.cfm

Copy form Wrod document and Paste in Oracle Forms not working

Hi
In one Oracle Finacial instance Copy from other document (word or Excel) and Paste in Oracle Financial Forms not working. Any body know the reason for this?
Eg. Copy Invoice Number form Excel and Paste it in Some of the payable forms or any other forms
Regards
Sunil

Hi
We have tried this but no output. ie the issue continues the same. This issue is there for all PC including Server. Is there any other solution avaliable. .
Regards
Sunil

Urgent help - MUSE email form not working - PLEASE HELP

HI to all!!
I'm having a big issue here with Adobe Muse cc 7.0
I have my personal domain www.shepherdtextiles.com
and third party host (here in China which is 72e.net (and yes, got all php and so on requirements Adobe Muse needs)
I follow carefully all steps to add a simple contact form, adding first [email protected] and changing it to my personal hotmail when I saw it wasn't working to try if with hotmail could work, but didn't.
I have checked the Muse PHP Diagnostics and as you can see the mail one failed.....
I used first the simple contact form that comes with Muse and later I used one from museresources.com but none of them seemed to work
I'm just guessing that something is not well setup on my server because I just follow all steps Adobe mentioned and I watched many videos where people do it very simple.
The error I get on my website when I click on submit button is "The server encountered an error"
There is NO error when I export to html or warnings, just exports fine.
PLEASE HELP
Many many thanks!
Vic

I'M having a similar problem with my Muse website Formally hosted by GoDaddy. The contact me widget does not send an email when you click submit button. Normally, it accepts with a green check mark in another screen. It does not do that. The submit just turns black when clicked, but nothing else happens
THe he regular email works. I am able to send and receive. It just does not work with the contact widget

Web Forms Not working on Client Machines with Separate Win

Hi friends,
We deployed all our Forms on web and we are using Developer
Server 6.0 ,OAS 4.07, Oracle Jinitator 1.1.7.18 ,Netscape 4.7
Browser
My problem is we configured forms to open in a separate window
this is giving problems on Client Machines they are getting a
blank screen ,previously we used to open forms in the same window
(browser ) at that time we didn't get any problem.
We are using Oracle Jinitiator 1.1.7.18 & Netscape 4.7 as
browser on Client Machines.
Thanks in Advance...!
Smita T
null

JInitiator will be downloaded only once - the first time when u connect to a web-forms application. After that - no problem. It is true that the first time it takes a little bit longer, but I think forms are working better using JInitiator. However - it is just a matter of settings how u will make your application to run. Oracle did great improvement of the speed introducing the forms servlet listener. I would expect even better performance with Forms9i. And Win2000 is not a problem, but combination between Win2000 and Pentium4 is. There is a way to avoid your (installation) problems however.

Unable to create Menu Item List Buttons in Forms - Not Working!

Hi guys,
I need desperate help since I have been stuck on these for 2 days and I am unable to move forward!!
I am trying to create a pdf form using Acrobat pro 9 and Adobe LiveCycle Designer ES. Since I am new to this, I have been browsing through numerous sites, forums and tutorials to learn about this. So far, I was able to create the forum with text fields, etc.. I am trying to have a column in my pdf form where the users can simply copy & paste image icons here..I was having difficulty with this already and have done numerous searches in google. In the end, I thought I am better off trying to use the "stamp" tool for this instead of image field. So this is what I did:
1) I already placed the image icons (that the users will be copying & pasting) on my pdfs so users can simply click on it to select the image.
2) I added a new bottom to this form which has the short cut to the menu item "copy" function. I labeled this button as 'Copy' and to this button, I added the following javascript for "Mouseup":
app.execMenuItem("CopyFileToClipboard");
3) Next I created another button that I called 'paste' and this button executes the "Paste Clipboard Image as Stamp Tool" menu. This button has the following javascript:
app.execMenuItem("Annots:Tool:StampFromClipboardMenuItem");
I thought that after doing the above, the user should be able to click on one of the images in the pdf, then click on 'copy' button and in the end click on 'paste' button that will then run an action so user can stamp this copied image to where ever they want in that file. But this is not happening!! I dont why?? Nothing happens when these buttons are clicked. I have made sure that the "Extended features in Adobe Reader..." is enabled and also tried running the above javascripts on my console window to test it and i know that the actual javascript code is not at fault since these functions works when I try the code through the debugger window. But I just cannot figure out why these menu item functions are not working when the buttons I had created are clicked!!! I dont know if what I have done is correct or if there is a easier way to achieve what I am trying to do!! Its a shame there is no simpler way for the end-users to copy and paste images to the columns in the pdf forms.
please help me understand why the above button are not working....any help will be great!!

Hi Paul,
This is further to our email correspondence. I am just pasting your email response here since it may be useful to other newbies like me:
"Ok here you go ......I had to add the new row via a script object as the new objects are not completely available until the script ends so I cannot resize the new row from teh current script.
Then when we resize - we have to resize the row, the cells and the image ....we start with all existing subforms then we do it for the new row that was just added.
Lastly I see that you have a delete row button. This will have to be part of the row otherwise we ill not know which row the user will want to delete .....unless you ask them (which is not good UI design)."
I was really impressed the way you modified the script so the table height does not change when new rows are added. That did help me in understanding the methods and it will certainly be v useful to me in the future. I have been practicing and getting a hang of LS and I have actually decided to redesigned my form since it appears that trying to have a fixed table height is quite a bit of work each time a row is added, removed or changed, etc... Your advise so far have been v helpful and it has helped me in redesigned the form into a different layout. So far so good...However, I just have a few more clarifications regarding some hurdles I am facing:
PS: I have emailed you a sample of my new form now so you can have a look at it.
1) Dynamic Image fields:
In this form, I have a subform that has a dropdown list and next to this, I have an image field. I want to change the image based on the selection in the dropdown list. I found a few samples and tutorials on this already and I tried 2 different approach for this. One works and the other doesnt.
Method that works: What I have done here is, I added all the images in the form and have put their presence to invisible. Then using the javascript, I am making the image visible based on the selection in the dropdown list. I found this method somewhere through googling and it works.
Method that doesnt work: Its similar to the above, but instead of putting all the images in the form, I just inserted 1 image field and then tried to change the url of this dynamic image based on the selection in the drop down list. But this method is not working. I tried inserting this jscript and nothing happens:
switch (this.rawValue)
case "1":
myImages.value.Image.href=http://www.mysiteaddress.com/blah_blah.jpg;
break;
case "2":
myImages.value.Image.href=http://www.mysiteaddress.com/blah_blah2.jpg;
break;
The 2nd method does not work. Although I know the method 1 above works and I am currently using it, I am just curious to find out why the 2nd method is not working? Did I get the script wrong or is this feature no longer allowed? I just thought that if the second method works fine, it saves the hassle of putting all the images on the form and then making them hidden. Instead, I just need to put one image field and then dynamically change its image based on the selection. I hope this make sense..please advise..
2) Changing the background colour of the Dropdown list box:
I am trying to change the bg colour of the listbox in the dropdown list object (only the listbox bg color and not the whole background color). So, I added the following script to the mouseEnter event and this works:
var vName = this.somExpression;
var fieldObj = xfa.resolveNode(vName + ".ui.#choiceList.border.fill.color");
fieldObj.value = "255,255,225";
My Problem: The above script works so I dont need to change anything there. But, I also want to add another script to the mouseExit event to change the fill color to its default once the mouse leaves the dropdown lists. Initially, this field has no fill colour and the border fill style is none. The fill color is only added during the mouseEnter event. How do I change the bg color fill back to none during mouseExit after the above script is executed on mouseEnter?
(NOTE: If you see my form, I have used the above scripts for the dropdown list only in "boxSubform[0]".)
3) Changing the length of the Dropdown List box:
I only have about 1.6 inches workspace to add this dropdown list box. However, the length of some lists (list items) in this dropdown list box is actually longer and the remaining part is cut out. So, I added the following script to increase the dropdownlist length and it does not work the way I would have hoped...
The script I have written so far:
I added these to the mouseEnter event and it works fine -
form1.pageSubform.dynamicSubform.Table1.Row1.boxSubform[0].MyDropdown::mouseEnter - (JavaScript, client)
this.w = "2in"; //this is to to increase the width of the dropdown list
I added these to the mouseExit event and it works fine too-
form1.pageSubform.dynamicSubform.Table1.Row1.boxSubform[0].MyDropdown::mouseExit - (JavaScript, client)
this.w = "1.625in";
When I tested the form with the above script, this is what happens:
1) First when you move the mouse over this field, the width increases. Similarly the width decreased when you move away.
2) So, even if this is clicked, the list box is opened with this 2inch width so thats good.
3) There are no problems when the mouse is moved over these list items as well. However, this does not look good when the dropdown list item is clicked with its item lists open and then the mouse leaves this area. In this case, as soon as the mouse leaves this area, the mouseExit script runs and hence it makes the drop down list width to shrink eventhough the list items are still open. How do I resolve this? I was thinking about this and I thought the possible way to overcome this is by writing a javascript for the mouseExit event executing something like this:
if this dropdown list is open,
then this.w = "2in";
else
this.w = "1.625in";
I am not sure how to write a jscript for the above?
(NOTE: If you see my form, I have used the above scripts for the dropdown list in "boxSubform[0]".)
4) Hiding the alternative row shadowing for hidden columns:
If you check out my form, you can notice that I have put the "close" button (button to delete table rows) on the left column and I have also put its presence to "Visible (screen only)". The parent table has got the 'alternative row shadow' checked. What I notice here is, when this page is printed, eventhough the first column's presence is set to "Visible (Screen Only)", it still prints the row shadow for this column and it looks bad. How can I fix this? Any help will be great!
I have already emailed you my new form again so you can have a look.
Thanks again Paul and I cant thank you enough for your help. I am sooo happy to see such a great support and resources available here since it can be a nightmare for some newbies like me... :-)

Dynamic table in webdynpro interactive form not working. Urgent

Hi guys,
I am facing a problem when trying to retreive data entered in interactive form dynamic table.i can get the data entered in non dynamic fields no problem.
I have a node structure like this
Root
Data 1...1 singleton and non tried both
Table 1...n singleton and non tried both
In my adobe form i tried adding rows using add instance, and also using add button in webdynpro native. In the same method that adds row i simulated the submit button to create row in WD context! It adds rows but any data entered later is lost. One more thing i have noticed is it sometimes works after adding just one row! Data is passed to context but from next row it doesnt work! What am i missing?
I also tried adding a button in webdynpro tray and adding the row directly to the context. new row is created in form but any data entered in new rows is lost!
I am unable to obtain the data entered in Dynamic fields. I thought i would try the xml reading method but the problem is after crating a couple of rows dynamically if i go save pdf locally the new rows are not showing up in the pdf!
I have seen a post which said using the if_wd_iactive handler to set the form as dynamic but that method is not available in our system! Sorry i am not in front of an SAP system so i cant type exact names!
I tried using zci update program/ etc etc but i am still struggling at the moment. Any help would be much appreciated! Pls ask if you need more info.
Regards
Naresh
Edited by: naresh dwadasi on Oct 7, 2011 9:05 PM

problem solved! I had to recreate the form. not sure if i corrupted the webdynpro scripts etc by mistake.

Contact form not working :( Please Help...

Hey guys,
I am really in trouble with flash forms and need help please. Ive been trying to get a contact form working for a few weeks but have had no luck.
Below is the code I am putting in to the flash form and php file.
(this is the code I have put for the send Button)
on (release) {
         if (name eq "" or subject eq "" or message eq "" or email eq "") {
               stop();
         } else {
         loadVariablesNum("form.php", 0, "POST");
         gotoAndStop(2);
(this is the code I have put for the clear Button)
on (release) {
    name = "";
    subject="";
    message="";
    email="";
(And this is the php file i created in dreamweaver and saved it as form.php)
$to = "[email protected]";
   $msg = "$name\n\n";
   $msg .= "$message\n\n";
mail($to, $subject, $msg, "Message From: Online client\nReply-To: $email\n");
?>
I have uploaded the swf file and php file on the server but my form is still not working by sending the information to my email.
This is the link where i got the code from http://www.flashvault.net/tutorial.asp?ID=103
It would be really greatful if someone could help me please
I look forward to your opinions and ideas.
Thanks

you should really check a tutorial using loadvars.
and there's no hope for that php file.:
try:
$to = "youremailaddress @ yourserver.com"; // change this to your email address
$email=$_POST["email"];
   $msg = $_POST["name"]."\n\n";
   $msg .= $_POST["message"]."\n\n";
mail($to, $subject, $msg, "Message From: Online client\nReply-To: $email\n");
?>

Open Form not working when called from When-Mouse-Click

In our application to navigate to other forms we have created a feature where user selects the Forms from a LOV, the form id is returned to the text item and user needs to click the text item.....In the text item the Open form command is given
This is not working
The form builder throws an error
Frm 92100 Connection interupted
what could be the reason

Code written in When-Mouse-click
for item :boo_toolblk.nbt_nxtscr which contains the form id
DECLARE
p_name_id PARAMLIST;
lv_param_name VARCHAR2(8):= :boo_toolblk.nbt_nxtscr;
lf_next_form_id FORMMODULE;
BEGIN
Clear_Item;
/*Create a parameter list named 'TEMPLT_PARAM'. First
** make sure the list does not already exist, then
** attempt to create a new list*/
IF not Id_Null(Get_Parameter_List('TEMPLT_PARAM'))/*Returns a BOOLEAN value if the object ID is available*/
THEN Destroy_Parameter_List('TEMPLT_PARAM');
END IF;
p_name_id:= Create_Parameter_List('TEMPLT_PARAM');
/*Add a value parameter to an existing Parameter
** List */
Add_Parameter(p_name_id,'templt_nxtscr',TEXT_PARAMETER,lv_param_name);
Go_Block(Get_Form_Property(:system.current_form,FIRST_NAVIGATION_BLOCK));
lf_next_form_id := FIND_FORM(lv_param_name);
:PARAMETER.next_form := lv_param_name;
IF lf_next_form_id.id is not null
THEN
Close_form(lf_next_form_id);
END IF;
Add_parameter(p_name_id,'previous_form',TEXT_PARAMETER,:SYSTEM.CURRENT_FORM);
/* opens another form*/
Open_Form(lv_param_name,ACTIVATE,NO_SESSION,SHARE_LIBRARY_DATA,p_name_id);
EXCEPTION
WHEN FORM_TRIGGER_FAILURE
THEN RAISE FORM_TRIGGER_FAILURE;
WHEN OTHERS
THEN RAISE FORM_TRIGGER_FAILURE;
END;
Error :-
Frm-92100 : Your Connection to the Server was Interrupted
This may be the result of a networn error or a failure on the server.
You will need to re-establish

Acrobat 8 form not working when enabled in Reader version 7

We have a form that was created in version 8 of Acrobat. It was enabled and is not working the same in some of our regional offices as it does in ours. Specifically there is a field that is allowing entry of 7 characters for users in our home office (all using Acrobat 7 or 8) and only 6 characters for users in one of our regions who are using Acrobat Reader version 7. Any idea what setting they have to change or what we have to do to enable the form so it works properly?
Thanks for the help!
Ken K.

The error message is "Please fill out the following form. You cannot save data typed into this form. Please print your completed form if you would like a copy for your records". I'm not really sure how to make an older version of pdf, but if we do this, won't the forms created in version 8 not work properly? Right now our IT folks are having the users start Business Tools to open the older forms and Reader 8 to open the new forms. The trouble with this is that the users aren't familiar with opening applications. They typically double click the file they want which is launching Acrobat 8.
Please let me know what you think.
Thanks again for the help!

WebDynpro ActiveX Button in Interactive form- not working in IE

Hi,
1) I am working with Interactive forms in WebDynpro. When I deploy the application, the PDF form is opens in a browser window, But the WebDynpro ActiveX button ( to call a method in view Controller) is not working.
When I copy the URL and try in another sysetm, its working.
I hope the probelem is with the browser settings.
2) And also, the 'https' URLs does not work properly in my IE.
Can you give me a solution for these problems?
Thanks,
Prabhakar.

Hi Prabhakar,
I doubt this is anything to do with the browser. Please let me know if you have already installed SAP Active Control Framework on your desktop.
I think this might be an issue. Also check for Adobe Reader version in both the machine.
Cheers
Satya

Clear form not working in multi record form 10g.

I have a multi record block form, when sys_indicator is 'Y' in any of the records, user should not be able to delete this record. In Pre_delete trigger, I put this code
below.
IF :CST_REFERENCE_CODE.SYS_INDICATOR = 'Y'
     THEN
     MESSAGE('You cannot delete this record. Consult your Administrator');
     MESSAGE(' ');
     CLEAR_FORM(NO_VALIDATE);           EXECUTE_QUERY;
--     RAISE FORM_TRIGGER_FAILURE;
     END IF;
I want to clear form an re_query, but the clear form is not working. Help

CLEAR_FORM is a restricted built-in and is not allowed on PRE-DELETE trigger.
the purpose of PRE-DELETE trigger is to do some validation before the actual delete happens and may be delete the child records before the master record can be sucessfully deleted.
it will be better if you could explain that why you need some different functionality on PRE-DELETE trigger, which looks strange. Like, user is trying to delete the record and you want to restrict user from deleting the record if some condition is met and want to re-query. what is the main purpose of doing query here again or why you want to clear the form.

Form not working in Reader X

Hello,
I created a form in Acrobat Professional 8, and it works perfectly. When I send it to someone using Adobe Reader X they can not type in the fields or use the submit button. Any ideas on what the problem could be?
I have reader enabled the form, and tried exporting it as an FDF as I have read on other threads, and its still not working.
Thanks in advance!

Additional info regarding this issue:
I am testing it on my PC. We have the creative cloud license so all is updated and complete. I was testing it in different ways, saving all the versions (static, dynamic, with and without extended rights) and the problem sticks. I have noticed that the file with extended rights weight a bit more than original file. Details below:
1. straight from livecycle: 832KB
2. opened in Acrobat, saved as copy 832KB
3. opened in Acrobat, saved with extended rights 844KB
4. opened in Reader, saved with filled data 864KB
5. opened the same file with Reader, it is empty so i save it as a copy - 864KB
6. opened it in Reader & Acrobat - it's empty; opened it in Photoshop - all data is there...???

HCM form not working.

Similar Messages

Maybe you are looking for