HCM IDOC : Create Master Data Export

Can someone throw some light on the transaction PC00_M10_OTEM - Create Master Data Export ?
I need to know on what criteria it fetches the data for various infotypes.
Thanks,
Sandip.

seet his:
http://help.sap.com/saphelp_dimp50/helpdata/EN/f6/2318b13cf011d2a62900104b56737d/frameset.htm

Similar Messages

IDOC : Create Master Data Export - transaction PC00_M10_OTEM

Can someone throw some light on the transaction PC00_M10_OTEM - Create Master Data Export ?
I need to know on what criteria it fetches the data for various infotypes. Its not picking data from IT0041 , what could be the possible reason ?
Thanks,
Sandip.

Hello,
I have some helpful information.
The program that creates the IDOC is RPCOTM** where ** is your country version.
The results of the OTSEL feature are checked in RPCOMF** and then the routine FILL_DATES(RPCOTFX0) is called to write the IDOC.
Debugging in this area will tell you...
1. Is the OTSEL value for IT0041 set
2. Was there a change in the dates for your period
3. What is being written to the IDOC
Best of Luck
Dan Reeves

Payroll Idocs- Master Data Export - US( PC00_M10_OTEM )

Hi,
I have one issue with the IDocs created by Master Data Export- US Program.
Program Name : RPCEMDU0_CALL
Tcode : PC00_M10_OTEM
The Idoc's which are being created by this program having some wrong values for Benefit Infotypes.
Can anyone help me to know how the Idoc's are created and where the Idoc segments are getting filled with the data in this Program?
I have debugged the program but did't get any clues.
Thanks in Advance.
Regards,
Sudhakar.

Hello,
I have some helpful information.
The program that creates the IDOC is RPCOTM** where ** is your country version.
The results of the OTSEL feature are checked in RPCOMF** and then the routine FILL_DATES(RPCOTFX0) is called to write the IDOC.
Debugging in this area will tell you...
1. Is the OTSEL value for IT0041 set
2. Was there a change in the dates for your period
3. What is being written to the IDOC
Best of Luck
Dan Reeves

Master Data Export - PC00_M10_OTEM - Information

Does anyone know where or if there is any detailed documentation on using the standard delivered Master Data Export program? We are currently using it in production but have questions as to what/when/why certain information is picked up passed to ADP.

Thanks for the information! But I'm looking for more details such as:
What triggers an IDoc to be created for an individual?
How does the program pick which items get included in the IDoc?
How do I trouble shoot why information came over, why some information keeps coming over or why some information isn't coming over?
We keep seeing unexpected things coming over in our IDocs even though nothing was changed.

Payroll - Master Data Export - US( PC00_M10_OTEM )

Hi,
I have one issue with the IDocs created by Master Data Export- US Program.
Program Name : RPCEMDU0_CALL
Tcode : PC00_M10_OTEM
The Idoc's which are being created by this program having some wrong values for Benefit Infotypes.
Can anyone help me to know how the Idoc's are created and where the Idoc segments are getting filled with the data in this Program?
I have debugged the program but did't get any clues.
Thanks in Advance.
Regards,
Sudhakar.

Hello,
I have some helpful information.
The program that creates the IDOC is RPCOTM** where ** is your country version.
The results of the OTSEL feature are checked in RPCOMF** and then the routine FILL_DATES(RPCOTFX0) is called to write the IDOC.
Debugging in this area will tell you...
1. Is the OTSEL value for IT0041 set
2. Was there a change in the dates for your period
3. What is being written to the IDOC
Best of Luck
Dan Reeves

HR Master Data Export error

Hi all,
I'm working at a client where we upgraded from 4.6 to 6.0. This client has never used the master data export program.
I'm trying to configure the master data IDOCs, but I'm having an error when running the program RPCEMDU0_CALL. It refers to an OSS note back in 2001, so that really does not apply to this installation. The problem seems to be with function module HR_PU12_UPDATE_T532K_T532L on IT0106. Some sort of data dictionary discrepancies. I haven't been successful in finding any newer notes related to this.
Has anyone experienced this problem before?
Thanks in advance for your response.
Cesar

Hi Bernd,
Thanks for your response. I looked at that OSS note but it doesn't seem to be realted to the problem I'm having.
The error reads:
"Export program terminated A009
Export program obsolete, regeneration required
Do not regenerate immediately: First make a $STRUC_P0106 back up of the include
PERNR N 000008 000000
(See note 375108) This include is very important if old cluster IF records"
I've re-activated the program and interface formats, but still getting the same error.
Thanks again,
Cesar

PC00_M10_OTEM - Master Data Export

Hi,
Whenever there is a change in any of the tax infotypes ADP is expecting do receive all tax infotypes. This functionality is not supported by SAP through PC00_M10_OTEM - Master Data Export. All we are sending are infotypes that were changed.
PC00_M10_OTEM - Master Data Export has a checkbox for sending all infotypes for all employees but thats also not what we are looking. We need to send all tax infotypes for an employee even though only one is changed.
Thanks
-Bharath

Hi, 
Other options are
#1 to develop an adhoc query for this requirement. Create four query with IT0,1,207,208,209,210. One will query the change date for IT207, second query will check only for IT208, 3rd only for IT209 and 4th for IT210.
Then use union command to combine the output.
#2 To develop ABAP report with same above logic
Provide fdbk whether these post are helping you or not. If needed ask for more help.
Good luck 
Thanks,
Amosha
 "Known is a drop & unknown is an OCEAN!"

InfoUser Master Data Export using scc8

Hi Team,
Iam doing User Master Data Export using scc8 .I have 1 question regarding this:
1)When i took export using scc8 only 1 TR is created in cofiles folder and i cant see that TR in data-files folder.
Can anybody help me in this??
More info:
We are going to rebuild the system so we need to preserve the user master record data.
Regards,
Abhilash
Edited by: gundala$ on Feb 29, 2012 8:10 AM
Edited by: gundala$ on Feb 29, 2012 8:10 AM

Hi,
Kindly go through the following link.
http://forums.sdn.sap.com/thread.jspa?threadID=1310350
Anil

Generating Master Data Export DataSources Error

Hi Guys
I 0VENDOR info object to be exported to other BI system . Iam using Generating Master Data Export DataSources. When I right click on 0vendor and say Generate export data source it shoud create 80VENDORM , 80VENDORT. But when I am doing that its saying generation successfull (what ever the success message)..when I go check the Infosources / Data Soruces / Info Provder and try to search 8zvendorM...I couldnt find this...Also I searched with vendor in all the tabs...Iam only finding 0VENDOR but not the new created once..Can any one tell me where should i check for it...Also ,please note that...Iam also using the same function Generate Export DS for one DSO and I can see this one in the Unassigned nodes of the Info Source TAb......
Please let me know the sol ASAP
regards

Hi PB and Voodi
I tried with Voodi's Sol and am still not able to find the 80VENDORM and 80VENDORT ....Where as PB's...I cant find the generated objects.in the settings tab...Can you please let me know what will be the issue and how to find this Data Sources....
Please let me know ASAP...regards

Some segments are missing in the idocs for master data zdebmas

hi guru's,
can any one hlep me here we facing the probelumm
some segments are missing in the idocs for master data zdebmas
, there is some issue on the generation of the Site Master IDoc (Message type: ZDEBMAS, Basic type: DEBMAS06).
This is using the SAP standard program (RBDMIDOC) which reads the Site master change pointers.
There is some segments below is missing in the IDoc:
how to chcek this probelumm...

hi
i got the function module. it is triggerig whne i do changepointer running.
what ever changes i made only that segments are onlycomming in to the idoc. but remaing segments are not comming.
my req is to show all segments even if i do changes in one segmet fields dont change theay have send to the interfece all athe segments.i ahve to do some enhancemetns for that
can u plse help me the login or any function module which will fill the alla the segmetns .

Points to remember while creating master data

Hi Gurus,
My client is using QM but inspection set up is not done.In material master check box for post to inspection stock is activated.Now they want to go for inspection set up in material master & using inspection types.In such case what care should be taken while creating master data. Because inspection stock will be already available while doing inspection set up & they have some batches in inspection stock which are created in year 2006- 2007.What care to be taken if we use mass processing(QA08) so that all batches which are manufactured in previous years will also get incorporated in new inspection set up.
Any suggestions are most welcome.Thanks in advance
Regards
Amit

Dear Amit
Long back I worked for similar assignment where only QM has to be introduced.
First you
1..identify the Material and Plants needs to be setup for Inspection
2. Create MIC for identified material
3..Create Task Lists
4..Make list of Material in Quality Stock with Plant and Batch number
5. Create new Inspection type (Copy of 08) for material already in QI stock
6..Move QI stock to UR
7.. On non working day or in mid night assign Inspection setup to all material (It's a QM Go Live dt)
8 .. Move identified stock back to QI stock so that Inspection lots will get created (IL origin 08)
Hope this information will give you some clarity & less hassle to move forward
Atul

Points to be remember While creating master data.

Hi Gurus,
My client is using QM but inspection set up is not done.In material master check box for post to inspection stock is activated.Now they want to go for inspection set up in material master & using inspection types.In such case what care should be taken while creating master data. Because inspection stock will be already available while doing inspection set up & they have some batches in inspection stock which are created in year 2006- 2007.What care to be taken if we use mass processing(QA08) so that all batches which are manufactured in previous years will also get incorporated in new inspection set up.
Any suggestions are most welcome.Thanks in advance
Regards
Amit

I am putting this thread in PLM forum
Regards
Amit

Create Master Data

Hello,
   I am starting a new BW-BPS project, I am a beginner in BPS, and I would like to know if there is a way to create master data from BPS, and if it is possible what are the steps to do so.
   Thanks for your help,
   Luz

Me too learner on BPS....
I understand from the documentation to maintain/create master data we have to use normal BW masterdata loading or Maintaince using RSA1. We can utilise those data in BPS ofcourse..
regards,
Hari
Welcome to SDN Luz!!

Want to display only certain manully created master data in F4 help?

Hello all,
We have created a Z infoobject (Char 10) and included in our cube. This Infoobject is mapped directly from DSO from another infoobject which has dates, when I see the data in the cube it looks good for this infoobject.
Now my requirement is, I have created a variable on this IO in the query and I want the users to see in the F4 help only the values that I manually maintain in the master data (I am creating master data records)
In the Bex Explorer tab of RSD1, I have selected "Values in Master Data table" and it shows me the values that I have created manually and also the values that got loaded in the cube from transaction data.
What is the setting I can use so the F4 shows only the values that I want users to see.
Any suggestions.
Thank you for your help in advance.

Hi Kiran,
Are you using 3.5 or 7.0 query designer?
If it is 7.0 query designer then you can see the option "refresh variable as designed"
But if you choose this option "values from the master data" it should work.
I've used in my projects this option verymuch. it worked.
Other than that you may change the query generated program in SE38, to select the F4 options in the Variable.
OR
You can keep Default values in the variable for the User.
Regards,
Ravi Kanth

Creating Master Data Centrally Using Guided Procedures

Is it possible to create master data centrally using GP say for example creating Material master data without using MDM? Is there a stand out of box delivered scenario exist without MDM. I did see the article Create Master Data Centrally Using Guided Procedures but it uses MDM.
Any help appreciated.

Wow, that was indeed a quick reply i have ever got on SDN. Thanks for the excellent link jitesh. However, where will i get the deployable files that it selects in the Import GP/CAF contents step of the demo? those are the webdynpro components files. One is SCA and other is SDA. Where will i get them?
Kindly post the link to those files if u have them or else send it across.
Regards,
Ameya
Edited by: Ameya Pimpalgaonkar on Sep 27, 2008 11:53 AM

HCM IDOC : Create Master Data Export

Similar Messages

Maybe you are looking for