HCM Proces & Forms - Mass process for OM

Hello experts,
I have a req. in which i have to
1) Create multiple Positions
2) Copy multiple Postions (upto 30)
3) Change multiple Positions(upto 30)
4)Delimit multiple Positions(upto 30)
The req. is to create mass OM process (like mass PA process or special payments).
Step1) As in mass PA process, user is able to select multiple employees, simillarly here user should be able toselect multiple positions.
Step2) As in mass PA process, after selecting multiple employees, a WD table comes (imn enter data stap), here also a WD able should come with all positions selected in previous step.
Step3) Once data for all the positions are saved , the corresponding action(cdelimit or change) for all the positions should be triggred in backend system.
Please help.
Regards,
Ashish Gupta

OK. So I understand the requirement a bit more now. Ultimately you want 30 positions created but via one form and one workflow.
Ideally in a create mode you would like to save the data multiple times. i.e. put the save data task in a loop, the iterations of which would be governed by an entry on the form? (A 'Number of Instances' field for example).
I am not sure if it is possible to save the data multiple times - even if you are in create mode and therefore generating new positions. Maybe someone else can comment?
Either that or can you clone the process object within the workflow? I think it best to at least use the form to process one position as it will have all the standard error checking, even if you decided to copy the position from within the workflow (via a program exit on a task or a class based based business object?).
Cheers
Ian

Similar Messages

HCM Process and Forms - Mass process for PA

Hi,
I have developed one PA process with process type "Enable Mass Process"
Now in portal the process is available both in Single employees process list and multiple employees process list. i want to remove it from single employees process list. Please advice the solution for it.
Regards,
Ashish Gupta

Implement BADI HRASR00PROCESS_VISIBILITY_LIST

Mass Processing for Forecast SOP

Hi Experts,
I have one requirement, I have to run Mass Processing for Forecast SOP in background Job based on consumption values updated in Material Master.
I have followed all instruction give for doing this process (SAP SOP Mass Processing - SAPs'WORD - We SAP For Your Cause) but could not achieve.
Can any one help to run in background job for Mass Processing for Forecast SOP.
Thanks in Advance
V.Sundeep

Hello,
Refer KBA 1778072 - Error message MA 653 when running mass processing forecast (program RMCP6BIN)
Internal condition NOT IPRWA-VGVON IS INITIAL not fulfilled
Internal condition NOT IPRWA-VGBIS IS INITIAL not fulfilled
Forecast/historical period cannot be calculated MA 653
Check your planning type which is used for your batch job. The number of historical periods in planning type (transaction MC8B) must not be smaller than the number of historical periods in forecast profile (transaction MC96). If the number of forecast period is maintained in the forecast profile (transaction MC96) the number of future period in the planning type must not be smaller than the number of forecast period in the forecast profile.
A not appropriate entry in SOP User Settings (transaction MC79) in Number of periods in the planning horizon can have an effect on this also.
Best Regards,
R.Brahmankar

Mass Processing for employees in HCM Processes & Forms

Hi experts,
We are trying to implement mass processing in HCM Processes and Forms,
Could any one of you give us an overview how this works.
Any suggestions / documentation is appreciated.
Thanks in advance.

Hi Nrupen
To be honest there is not much to it and the SAP documentation covers it really.
Enable the process to be mass processed.
Make fields visible/invisible/readonly in the columns using the field attributes
A singlle process is triggered for each employee in mass process table etc.
Do you have a specific issue?
Regards
Ian

Mass processing for SOP

Hi,
I am able create sale plan through MC87 transaction by selecting the create sale plan through forecasting, when total consumption values are maintained in the material. But I want this to be done by MASS processing function. In other words I want to up date key figure sales in S076 table.
There is one tcode MPBT which is to create total forecast in background. But this is happening only when unplanned consumption values are maintained in material. Is this behaviour is correct?
Can u detail the configuration settings required for mass processing of SOP.
Through help I came to now that mass processing can be done for forecasting. Is this forecasting and creating sales plan are same. Kindly brief.
Thanks & Regards,
N. Laxman

you can refer the below link:
[http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOLISPLN/LOLISPLN.pdf]
configuration steps for SOP:
1)Set parameter for Info structure and Key figure
2)Maintain Transfer Profile
3)Define Activity
4)Define Key figure assignment
5)Define copy profile.
procedure of Standard SOP:
1. Create Plan in inactive version
2. Disaggregate product group plan & Check capacity
3. Version Management
4. Transfer Product group to planning
procedure of Flexible Planning:
1.Create Plan in inactive version
2.Convert Plan in to Active Version
3.Transfer to Demand management
Master Data in SOP:
1.Information Structure
2.Planning Type
3.Planning Hierarchy
4.Product Group
5.Resource
6.Rough cut planning profile
It's very helpful link & std procedures for SOP.
SOP steps have 3 classifications
1) STD SOP for Material
2) STD SOP for Product Group
3) Flexible Planning
A) Now Let we take STD SOP for Material
This will takes place in Material and Plant level
so the charateristics will be Material and Plant
The key figures are Sales,Production Qty,Targer stock level,.......etc
Steps
1) Create Planning for material MC87
2) Copy to Active Version MC78
3) Transfer to Demand Mangement MC74
B) STD sop for Product Group
Here also the Characteristics are same material->product group
You have to maintain master data Product group
steps:
1) Create Product Group MC84
2) Create Plan for Product Group MC81
3) Disaggregate Product Group Plan MC76
4) Copy to active version MC78
5) Transfer to Demand Management mc75 for Pg or mc74 for material
C) FLEIXIBLE PLANNING
Here you can able to Define your own characteristics and Key figures
Char like Sales org,Dis chann, Div,......
Key figures like stock,invoice qty,....
steps
1) Create Info structute MC21
2) Maintain Planning Parametes MC7F
3) Create Planning Type MC8A
4) Create Flexible Planning MC93
5) Copy to active version MC8V
6) Transfer to Demand managemet
5) Create Std SOP Planning -MC
6) Transfer to DM from change mode of Flex Plann with active version MC94
if you want use the flexible planning info like SIS in std sop after the 4th step of above it will be like
5) MC87 std sop there Sales data from SIS it will ask for info str and version then you can get it automatically then the std steps like
6) Copy to Active Version MC78
7) Transfer to Demand Mangement MC74
Pls let me know any clarifications.

Want to do mass processing for inspection lots with status SPRQ

Hello,
My company using early lot creation for 04 inspection type. We have thousands of inspection lots with status "UD ICCO SPRQ PRII PRSI STUP". Now due to SPRQ status, system is not closing process orders associated with thousands of inspection lots.
Is there any transaction where I can do mass processing of inspection lots to change the status "SPCO" from "SPRQ"?
Thanks
Bhavesh

Dear Bhavesh
You may have to modify the standard program to do so. Modify this program RQEVAI30.
This can help you
Regards
gajesh

Mass processing for forecating in SOP

Hi all
I ma able to forecast a material online thru MC87 in standard SOP, but when I try to set up a variant for mass processing in the background the forecasting does not work. Has anybody encountered this issue?
thanks a lot

Tajuddin
Thanks for your reply. I am reading the R/3 documentation and it talks about Mass processing of SOP forecasting ( R/3 documentation verbiage below) I am trying to follow these steps but it does not work. Isn't this mass processing supposed to be for forecasting in mass in background?
Am i understanding this incorrectly?
How to Run the Forecast with Mass Processing
You can use SOPs mass processing function to run the forecast. In this process:
You create a forecast profile.
You create a planning activity and include in it this action (the forecast profile).
You create a mass processing job for this activity.
You schedule this mass processing job.
The results of the forecast will be different if the forecast is run at a high level and the results then disaggregated to the detailed level than if you carry out the forecast at the detailed level.

Mass processing for printing shopfloor papers

When I press background processing for printing shopfloor papers in COHV then I get message background processing triggered but no print comes out of printer.
Where to see result of background processing. In COHV log is also empty.
My requirement is that when I press print Icon in COHV then it should automatically print paper, No need to goto Sp01 and print from there .
Please guide.

Mayuresh,
In the order print control configuration transaction OPK8, activate Print Immediately check box against the individual list in the "Spool Parameters for user" folder.
Since you have mentioned that you are using Background processing for printing, you need to run Program "PPPRBTCH" in background to print the papers.
Regards,
Prasobh
Edited by: Prasobh Karunakaran on May 7, 2009 8:03 PM. Added background processing program details as user is using background processing mode instead of online

HCM P&F - Mass processes Fast Data Entry Error

Hi guys,
I have a new requirement to do a new mass process to save some IT data on several employees without Workflow related. First of all I have tried to understand how standard is working and I have checked one of mass process that system provides, in my case HR_PA_XX_MSP_ADDR_CHANGE process.
Unfortunately, when I execute start application ASR_MASS_START_PROCESS (configuration ASR_MASS_PROCESS_CONF) and select my process and more than one employee I'm getting a dump. This issue is not happening if just select one employee.
I'm going to attach some screenshots to clarify steps that I'm following.
Anyone has faced similar issues? It seems is a standard problem and I want to get some thoughts of you!
Regards

Sorry, I don't get you.
When selecting employees there is no issue there, my issue is when I save the data once I have selected more than one employee.
Regards

Mass processing for inbound orders idoc's from file

Hi Experts,
I have an requirement wherein we need to process all the ORDERS idocs sent from a thrid party system to a particular folder in the SAP system. Now we use a custom programme which in turn calls fn module IDOC_INBOUND_FROM_FILE to process each file. Here if the fn. module IDOC_INBOUND_FROM_FILE hits an erroneous file (control record error) it issues abend message which causes to entire programme to exit leaving rest of the files in the folder unprocessed.
Let me know if there is any other function module or way to tackle this issue so as to process all the files.
Thanks & Regards,
Jimmy.

Add the exception ERROR_MESSAGE = 99 (or some other unique number) to the standard exceptions in the function module call in your custom program. This will allow you to trap the error and continue processing.

Mass processing for rough-cut capacity

Hello PP experts,
Help me with the options of checking rough cut capacity in flexible planning in Mass.
Are there any separate transactions availbable or can i create a macro?
Thanks,
G.Madhvaraj.

Thanks Brahmankar, I understand that. Next doubt is,
This rough cut capacity situation is not been stored in my info structure.Where does it get stroed?
G.Madhvaraj.

Attachment Buttons not coming in Task TS17900101 of HCM Forms and Process

Hi ,
We are using HCM Forms and process for changing employee organization unit which is linked with workflow for approvals.
In this workflow we are calling standard task TS17900101 .Till now every thing is working fine but the problem is with attachments as their is a requirement to show attachments button with this Approve and Reject Task. But as per my knowledge SAP has not given any option to attach documents with this task which is however only possibe through TS17900100.
So can u suggest any way to attach documents with Approve and Reject Task which is TS17900101.
Thanks,
Rahul

Hi,
i have the same problem and no idea how to solve it.
Please let me know, what enhancing module pool code helped you
Thanks,
Galina

Cache issue coming in Start Process for Employee iView under MSS

Hi,
Navigate to MSS -> Team -> HCM Process and Forms -> Start Process for Employee
In Start Process for Employee iView, when I clicks on Refresh link at the bottom right of the table the Direct Reports got removed from the table (which is correct) but when I navigates to some other screen and comes back then again the previous data comes back. It seems to be cache level issue. Even I logs off and login the same data comes back which should not happen.
I have checked the forum [Team=>Personnel Developent=>Employee Search; and found it that Refesh property will work if I set the parameter of iview Cache Lifetime = -1 then it will disable the caching at all.
And I wants the same behaviour for Start Process for Employee iView. But I am not able to find the similar property in Start Process for Employee iView.
Anyone have an idea of What is the resolution for this issue?
Regards,
Deep

Hi Deep,
now I understand your problem )
To me it sounds like an OADP cache issue rather than one in Portal. The iview uses OADP which again uses the cache which does not reflect on the actual current org-structure.
One possibility would be enhancing the WD4A and call FMs
HRWPC_OADP_DELETE_TGTOBJCACHE
HRWPC_OADP_DELETE_SRCHOBJCACHE
HRWPC_OADP_DELETE_NAVOBJCACHE
HRWPC_OADP_DELETE_DATAVWCACHE
dependent on what you want to delete to refresh.
I would probably try to enhance HookMethod WDDOINIT in Component Controller and call them there, but that's just a guess; could be complete nonesense.
Another possibility would be trying to add the application parameter "sap.xss.req.crt.cachelifetime=0" to the iView.
Links for reference:
http://help.sap.com/saphelp_ppm50/helpdata/en/21/1ac5ca5cad46528d4f970cc03b8e8f/content.htm
Web dynpro abap and OADP cache
http://help.sap.com/saphelp_dimp50/helpdata/DE/97/7f754067025537e10000000a1550b0/content.htm
hope this helps a bit now
regards, Lukas

How to create process massages through mass process

Hi
I have created process orders in mass
I have release process orders in mass ..at the time of release system creates control recipe automatically system status CRCR
after that i have done conformation ,then i have done c057 (create message indivudual )...here i want to create process messages for all oders at a time means mass or automatic ....is there any standard process is there ...please guide in this process hoW to do mass process for create process messages
Regards
Sasi

Hi
In CO69... Shold create varient.... i tried but we get error messages
our process message category has contain charcterstis are....
process order,control recipe,control recipe status,date of evevt,time of event
in co69 i maintaine chracterstic val *** type .which should i maintain .. here 3 there (no value,fixed value ,dat point)
Regards
Sesidhar

Mass processing PIR's

Can we do mass processing for materials to upload in PIR table? We dont have product groups?

Hi
Either you can use the BAPI (BAPI_REQUIREMENTS_CREATE).
OR
Goto Tcode : MD61 and enter the Material / Plant and goto the intial screen and Copy paste the Material Number and Qty from An Excel sheet upto the number rows displayed in MD61 screen and press enter and then Click Page Down Ikon, system will show the new rows where you can copy and paste again from the Excel sheet and Repest the steps to complete 2000 materials.
OR
You can create the BDC , BDC will work for Tcode : MD61 .
OR
You can use LSMW also for creating PIR's
Hope this will help you.
regards
radhak mk

HCM Proces & Forms - Mass process for OM

Similar Messages

Maybe you are looking for