HCM Process and Forms Pass data's from forms to workflow

Experts,
In my HCM forms and process, I have some fields. So at runtime Approver will enter some inputs on it. Example [Dependent details - Spouse, child names].
It will stored temporary in the workflow, and finally will update in the system.
Now my question is where the data's strored in the workflow. I need the data's entered by the Approver, to check some validations.
So how to get the data's entered in the Form to the workflow.
Please help me on this,
Helps will be highly appreciated.

Hi,
Idont have much idea about HCM forms.
but if u can able to read the forms    u can store it in workflow container and the necessary validations and subsequently u can save it in  database.

Similar Messages

  • How to import a value from HCM process and forms to workflow?

    Hi Experts,
        i am new to HRASR_DT T.Code , I had  designed a form in Form scenario and process in that T.code . I linked that process with workflow. i had the Employee Number field in Form , i want to IMPORT that employee number into my workflow container element.
    Thanks & Regards,
    Malli.

    You use TS17900110 to extract values from the form into the workflow container. For any HCM P&F workflow, you should always start by looking in task group TS17900001. All the HCM P&F-related workflow tasks, etc. are contained there.

  • Calling a web dynpro from hcm process and forms

    Hi All,
    I have a requirement where in i need to call a web dynpro when i click on a drop down in HCM Process and Form(i.e in Adobe Form) and this drop down should get populated via the code written in webdynpro. Can this be done?if yes can anybody please give me an idea how can i achieve this.
    Thanks,
    Praveen.

    HI Vishal,
    thanks for your earlier reply,
    i have requirement where in i have  to read vales or fields from hcm p&f form (adobe form which is isr native) and based on the read values i have to buld a search help . Could you please help me on this.
    Thanks,
    Praveen.

  • Regarding scripting in adobe HCM process and forms

    Hi Gurus,
    I am working on adobe HCM process and forms. Configuration has been done for HCM process and forms and I am getting the scenario stage level in the forms based on which I will give the visibilty to differenct levels of approvals in the form.Scripting has been done for that.
    When form is initially loaded, I am making invisible some of the fields. On choosing the drop down the value that I make invisible is visible again. I found that Scenario stage that I bound to the form attribute is getting cleared off, when drop down event is called. Drop down event calls the generic services to fill the drop down values. Drop down used is from ISR Controls from the library.
    The scripting that I used in the drop down event is as belows
    if (xfa.form.data.Page1.FORM_SCN.rawValue == "INIMGR_LVL1")
      xfa.form.data.Page1.DE.DEContent.HR_VIEW.presence = "invisible";
    xfa.form.data.Page1.FORM_SCN.rawValue  this is getting cleared off. Form SCN is the field in the form where in which I bound the attribute scenario stage.
    Pls help me on this.
    Regards,
    Krishnan  Paramasivan

    Solomon,
    Thanks for the earliest response. can you explain me in detail. Where to check/select the form scenario stage field to be passed over. In scripting the coding written as below:
    xfa.record.CONTROL_PARAM.ISR_EVENT.value = "DD_GET_POSITION";
    ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
    DD_GET_POSITION is the event created in generic services and used in the user events in the form scenario stage in HRASR_DT.
    Any further guidance on this ?
    Thanks in advance.
    Regards,
    Krishnan

  • HCM Process and Forms - Changes to Form Issue

    We have a scenario within HCM processes and forms where the changes being made by an intermediate approval step is not being sent to the next level approver.  For example, in a pay change the initiating manager sends the pay change to his/her boss for approval, then once approved the form is sent to HR for final approval and update into R/3.
    In this scenario the initiating manager starts the process and makes appropriate updates to the form (including comments).  This then routes to that manager's manager for updates/approval.  When processing the form, the approving manager can see the information input by the initiating manager.  The approving manager then has the opportunity to make appropriate changes within the form and add comments before it is approved and sent to HR for final approval.
    Once the approving manager makes changes and sends this to HR, when HR processes the form they see the changes as if it was sent by initiating manager (HR does not see the changes made by the approving manager).
    I appreciate any insight you may have on this issue.
    Regards,
    Brad

    Sounds like you process is designed incorrectly and your are having problems with your process object integrity. You need to be careful with loops/branches when designing your process. Are you doing it all in the same Form Scenario and just using multiple steps? The form scenario will "share" the "data" hence you can have issues. You can split it to a differnt form scenario and pass the data over from the other FS to your FS. Then you know you will have your own data there. I often see people trying to do their whole process within one form scenario and use multiple steps without realizing the data integrity issues with that.
    Hope this helps.

  • Dump while Executing Hrast_dT (Design time of HCM Process and Forms)

    Hi All,
    I am getting Syntax Error Dump while Executing Hrast_dT tcode (Design time of HCM Process and Forms) and here with i have mentioned the source code also ist contained in standard class.
    *METHOD constructor.
      DATA:
        badi_context          TYPE REF TO lcl_badi_context.
      CALL METHOD super->constructor
        EXPORTING
          form_scenario         = form_scenario
          form_scenario_service = form_scenario_service.
      DATA:
        t5asrfscnsrv_wa TYPE t5asrfscnsrv.
      SELECT SINGLE * FROM t5asrfscnsrv INTO t5asrfscnsrv_wa WHERE form_scen_srv EQ form_scenari
      ASSERT sy-subrc EQ 0.
      ASSERT t5asrfscnsrv_wa-service_type = 'GENSRV'.
      fill_table_metadata( ).*
    i followed this link also..its not working for me..
    [Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3]
    Regards,
    Parthi

    Hello Parthasarathi,
    Please, try to implement the note 1075650.

  • Query on HCM Processes and Forms

    Hi
    I am facing some issues in configuring Hiring Forms in HCM Processes and Forms. I can place them in 2 baskets and describe each of them below. I would appreciate any advise on ways and means to overcome these errors.
    Basket #1
    I want to use the standard forms SHU1, SHU2 in development environment to understand the HCM P&F functionalities. I copied these form scenarios from client 000 and did all the configurations as outline in IMG activity HRAdministrative Services >> Configuration of Forms and Processes >> Sample Processes for HCM Process and Forms.
    When I run a check using HR Administrative Services >> Configuration of Forms and Processes >> Configuration of Forms >> Check Consistency of Form Scenarios and select Form name, I get errors along following lines:
    u2022     Error Message Sample#1 Form scen SHU1 vers. 00000 serv. SAP_PA: Only one deflt value allowed for field I0009_ZLSCH
    u2022     Error Message Sample#2 Form scen. SHU1 vers. 00000 service SAP_PA: Field I0007_ARBST default value is not created
    u2022     Error Message Sample#3 ISR scenario SHU1 version 00000: Field I0001_BUKRS is missing
    u2022     Error Message Sample#4 Form scen. SHU1 vers. 00000: Field I0007_ARBST service for default values not required
    However, at the bottom of the log I see this message in Green: Form scenario SHU1 version 00000: Form scenario is consistent
    I tried to make the changes as suggested in the Long Text for each of these messages. Probably due to the fact that I am using standard delivered forms, I get this message u201CDo not make any changes (SAP entry)u201D and I am unable to save the changes.
    Basket #2
    In this basket I have Org_Change form and have managed to go the whole nine yards and complete the configuration in ECC. The consistency checks for process and forms are in green. However, I am unable to start the process through Portal. I get this message u201Cno data availableu201D when I try to select a process.
    Among the 5 roles delivered in SAP as initiators for processors u2013I am interested in 3 of them HRASARA (for HR Administrator). I have configured HRASRA and HRASRB as initiators for Org_Change. However, I am not able to figure out how to link these roles to portal roles such as SAP_ASR_ADMINISTRATOR, SAP_ASR_MANAGER etc.
    I would appreciate any advise on ways and means to overcome these errors.
    Thanks
    Subhash

    Have you been able to fix your issue in Basket # 2 ?

  • WS17900260 - Task TS17900108 resulted in error, in HCM Processes and Forms

    Hi,
      I have designed a HCM process and workflow. In custom workflow ,WS17900260 (TS17900108) has been used to save data. In this step it is resulting in error and shows the below message in "Step History" tab. No message in Message Tab.
    Work item 000000172044: Object CL_HRASR00_WF_COMPONENTS method SAVE_FORM_DATA_TO_DB cannot be exe
    Message no. WL821
    An exception with the type CX_HRASR00_PROCESS_MODE LLING occurred, but was neither handled locally.
    I tried executing the associated method and I did not get any error. Please let me know if anyone has faced this issue and how it is resolved.
    Thanks,
    Sri

    Hi Sri
    Expecting a prompt answer in 2 hours time is a tad too demanding for all of us
    We try to help you based on our experience and if we do not have it, we just wait for the right one to respond.
    It is not that I have experience in HCM Processes and Forms, but a little bit of googling to help you gave me the following:
    1) SAP Help for your task TS17900108 states that it has the same requirements for binding as that of task TS17900107 .... check the latter half of the page here:
    https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f28f8a1e5132c3e10000000a1553f6/content.htm
    2) If you check TS17900107 binding requirements, it needs certain necessary parameters which may be causing the issue. Check the mandatory requirements here:
    https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f2cf2c249b3268e10000000a1553f6/content.htm
    Also check for authorizations
    3) See how another user solved the issue with the same method here:
    http://scn.sap.com/thread/1753027
    4) See the possible advice for a similar issue with task TS17900107 (which is kind of similar to your task)
    Novice in HR forms and processes workflow - help in usage of TS17900110
    I checked various threads and the common link is that it all depends on your system and the bindings or the custom functions called within. Also do check for authorizations as mentioned in the first link from Help.sap.com
    I am sorry, I cannot give you further details because I myself do not have experience in HCM P&F. I am sure you too can google further from here, or we can be a little more patient for others to reply (I understand that some issues are critical and need immediate resolution, but we all are busy in our own projects and sometimes are not able to reply immediately).
    Regards,
    Modak

  • Infotype 0000 Creation using HCM Processes and forms in MSS

    Hi,
    I need to create an Action for Transfer an employee using HCM Processes and Forms. So, my form should update infotype 0000, 0001, 0008 etc.
    But when I provide create operation for infotype 0000, system is throwing short dump. When I change the operation to change nothing was creating in infotype 0000 for that respective employee. Is there any way to update infotype 0000 using HCM Processes and forms. Please help me here.
    Thanks & Regards,
    Nayani.

    Hi Chris,
    Thanks for your reply mate.
    I understand that for IT0000 update we don't have to configure it explicitly.We just assign values to MASSG and MASSN and IT0000 should update. I am doing exactly that.
    For the "condition" we do have multiple rules for that and I am familiar about the trickthat the rule fields must be part of the SAP_PA service which is actually making the update. That's all in place and that's working fine.
    Now coming to the problem -
    The "action" is "Return from Career Break" where the only PA infotype that has to be updated is IT0000. Besides that we are updating Absences,IT2001.
    I have tested the process thoroughly and it seems that the system does not allow an IT0000 update without any other PA data change. To test this, I added a PA infotype update in my config and at that time IT0000 got updated beautifully. But when I am trying to update only IT0000, it fails.
    To solve the issue, I had a discussion with my team and we have decided to copy IT0001 along with IT0000. So as of now, we have sorted out a workaround but the technical issue is something I would like to look into.
    If you figure out anything then please let me know.
    Appreciate your help.
    Thanks,
    Saikat

  • HCM Process and Forms & Global employee management

    Hi all,
    I would to know if anyone of you experience in implementing HCM Process and forms for Global employee management(GEM).
    I would like to know the difficulties or challeges .
    How the forms will work.
    Means if i have created a form using Personnel number without GEM.
    Later if i Implement GEM.do i have to Change the form ?
    Does P&F has any option choose the employee based on personnel id anywhere or we have to use personnel number and process as existing.
    what could be stuctures for each infotype which are country specific .
    Please share your experience on this.
    Regards,
    Nachy

    Forms and processes are enabled for CE/GE.
    what process you would lile to do ?
    refer HR_PA_US_ADDL_CONTRACT sample process  and note 1366872
    1) The central person id of the existing (reference) pernr should be
       read with the help of a generic service and this should be made
       available for the SAP_PA service so that a new central person is not
       created. This should be set in the field CENTRAL_PERSON in the
       form scenario.
    2) An explicit operation on IT0709 should not be defined in the
       infotypes and operations of the design time tool. This is
       automatically handled by the infotype framework through the data
       sharing mechanism (table T582G). Kindly ensure that IT0709 is
       enabled for data sharing and please remove it from the process.
    3) The reference pernr data and the shared infotypes must be read with
       the generic service only (refer to note 1366782), these should not
       be read with the SAP_PA service as this may lead to a clash in the
       record keys and can lead to undesired results.

  • Error in MSS HCM Processes and Forms Overview

    Hi all,
    Currently we are working on ESS/MSS from NW 7.3 portal.
    When i open HCM Processes and Forms Overview from MSS, it prompt me to change the password again and again.
    And on some user HCM Processes and Forms Overview not shown properly.
    Error while processing your query
    What has happened?
    The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
    Note
    The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
    The error occurred on application server MUMSAP02_BEQ_00 and in work process 8 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
    Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
    Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
    What can I do?
    If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
    If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
    If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 8 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system adminmistrator.
    Error Code: ICF-IE-http -c: 350 -u: ISHAJI -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 8 -d: 20130514 -t: 133514 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF8DA00F61FBEAC0_D4AE5218F8121ED2AF8DA00F5D19EAC0_1 -x: 006DBCE20F7BF1E58AC0D4AE5218F812
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Please suggest me the solution.
    Regards,
    Devendra

    Dear Andrea,
    I reset the password of backend user and gave sap_all and sap_new role.
    Last time it prompt the screen in mss as to change the password. (See above screen shot).
    But after reset the password...error showing instead of login screen in mss as below:
    Error while processing your query
    What has happened?
    The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
    Note
    The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .  
    The error occurred on application server MUMSAP02_BEQ_00 and in work process 7 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
    Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
    Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
       What can I do?
    If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
    If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
    If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 7 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system adminmistrator.
    Error Code: ICF-IE-http -c: 350 -u: IKHASU -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 7 -d: 20130514 -t: 175940 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF923E065A39EAC0_D4AE5218F8121ED2AF923E394271EAC0_1 -x: F091BCE2D132F1D58AC0D4AE5218F812
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    I checked log in ST22 as below
    What happened?
        The exception 'CX_PARAMETER_INVALID_RANGE' was raised, but it was not caught
         anywhere along
        the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program
         'CL_ABAP_TSTMP=================CP' has to be
        terminated.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_PARAMETER_INVALID_RANGE', was not
         caught in
        procedure "SUBTRACT_TIMESTAMPS" "(METHOD)", nor was it propagated by a RAISING
         clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        Parameter has invalid value: Parameter TSTMP1 has invalid value 0.
    Regards,
    Devendra

  • Use HCM processes and Forms without using the Enterprise Portal

    is it possible to leverage existing HR Admin Services (HCM processes and Forms) functionality without using the Enterprise Portal?
    1) Create an Adobe form and Interface using SFP
    2) Set up ISR and Form Scenario
    3) Set up Forms configuration to use existing Backend and generic Services
    4) Set up workflow to updated Backend using Services
    is it possible to do the above steps and not use the Portal? If Yes, how do we present the forms to the Manager, and provide different buttons that appears on the Portal by default?
    Any ideas will be greatly appreciated.
    Thanks,
    Saurabh

    Hi Saurabh,
    your assumptions and findings (items can not be started from the backend workflow inbox etc.) are correct: These processes can not be started without the Portal and it is not intended to do this.
    The above mentioned backend report are only forseen for implementation and testing purposes and not for productive use.
    In addition to the fact, that you already can't execute the work items a lot of other features of the framework (Process Browser etc.) are only available through the Portal.
    Best Regards
    Michael Bonrat - Solution Manager HCM Processes and Forms
    Info about HCM Processes and Forms:
    www.service.sap.com/erp: 
    - SAP ERP Human Capital Management -> Workforce Process Management -> HCM Processes and Forms

  • Default value in dropdown field for FPM form in HCM Processes and forms

    Hi Experts,
    I am developing HCM Processes and forms using FPM forms and I had a dropdown list contains ten values. So, every time while opening the form first time, my dropdown field should be defaulted with fifth value from the list. How can we achieve this in dropdown field related to FPM Form.
    Please guide me.
    Regards,
    Nayani.

    You would have to assign the default value to one your custom generic services.
    Regards.
    PS: There are posts which talk about generic services , make yourself comfortable with the concept of generic services.

  • Workflow could not start in HCM process and Forms

    Hi All
    It would be really helpful if you can suggest possible solution regarding case management case in HCM forms and process.
    I have set up a simple custom HCM process and Form regarding Infotype 2 updation. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Exception occurred - Error when starting work item 000000007031
    PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
    CREATE - Error when creating a component of type 'Step'
    CREATE_WIM_HANDLE - Error when creating a work item
    CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
    Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
    I have searched few SAP notes such as 1384961 which talks about same error but it is implemented in our system (EA-HR 604 , Patch 27, )
    Appreciate any help.
    Thanks
    Umang

    Hi Swati
    One of the similar (not exact) issues were resolved by correcting the event linkage....please refer thread:
    http://scn.sap.com/message/14848795#14848795
    Not sure of the details of the the resolution, maybe Ragavendran Kanagaraj can throw more light.
    Just some high level checks (if not done already):
    Check event linkage errors in SWEQADM if anything is related to your WF
    Check in SWEL if it's showing any more details (not sure if it will)
    Any warnings in syntax check of WF template (PFTC) or WF definition (SWDD)
    Any error sin binding
    regards,
    Modak

  • Use of Table in HCM Processes and Forms

    Hi Guys,
    I am developing an Adobe form for the HCM process and forms .My requirement is to populate table values in the adobe form   based on a value got in  the backend service.
    I tried declaring an internal table in the backend service but in vain.So decided to code inside the context of the form.But was not able to use the parameters available in the
    Now the trouble is how to get the value from the form scenario field and populate that table.
    Please provide your thoughts.
    Regards,
    Aravind.P

    Hello Aravind,
    Could you please tell us how you solved this ?
    Edited by: Gopi chelvam on Mar 24, 2010 6:13 AM

  • Dynamic navigation, on HCM Process and Forms "Web Dynpro FORM"

    Hi,
    I'm trying to solve an issue regarding dynamic navigation, on a enhacement done at the Web Dynpro ABAP QISR_UI component for HCM Process and Forms.
    I'm hiding the Adobe Form, and doing "do_dynamic_navigation" for a dynamic generated view container present at the VIEWSHOWFORM on the QISR_UI component.
    The code works great, i.e.: the Adobe Form remains hidden and the custom form, using Web Dynpro appears.
    I'm also using the HRASR00_PROCESS_EXECUTE_1 component to execute a Portal IView (Floorplan based component).
    When the process is started, and the folowing actions are executed:
    1- Select Employee
    2- Select Process
    3- Edit form
    4- Press back (for example if the wrong process is selected)
    5- Select the Process
    6- Edit form again
    There is a NULL exception, the "embedding_vca" (below) is NULL
    SAPLWDR_RUNTIME_REPOSITORY
    METHOD: IF_WD_RR_VIEW_USAGE~GET_EMB_VIEW_CNT_ASSIGNMENT (LCL_VIEW_USA
    * method IF_WD_RR_VIEW_USAGE~GET_EMB_VIEW_CNT_ASSIGNMENT
      method if_wd_rr_view_usage~get_emb_view_cnt_assignment.
        result = me->view_usage->embedding_vca->get_api( ).
      endmethod.
    "IF_WD_RR_VIEW_USAGE~GET_VIEW_CONTAINER_ASSIGNMENT
    Can you guys give me an hand?
    Regards

    Hello,
    Basically what I did was replacing the Adobe Form, by a Web Dynpro component that contains its own form, and associated logic.
    Tecnically the steps to acomplish the task were:
    1º Development of a component for showing a form. ( I suggest you to start with just a "hello world" or something very basic )
    2º Enhance the QISR_UI component (VIEWSHOWFORM view, on the modify view method), something like
    if form scenario = XXXXX then
    hide the adobe form;
    create a custom view container (the problem I had above), and create an instance of the component created on step 1
    end if
    3º Access the context that the original form returns (you can check the context debugging the VIEWSHORFORM view )
    4º Pass the context to the component created..
    I can't provide further details on this, I'm sorry...
    I do not suggest doing this, this was a requirement so I had to do it... But this requires a lot of workarrounds, and lots of small changes in standard code related with process and forms... It's not, also, a "clean" solution
    Regards,
    Joã

Maybe you are looking for