HCM Process&Forms EHhP5 "proces is currently not released for execution"

Hallo!
After changing the system to EHP5 i got a new error:
Process XYZ is currently not released for execution
I didn't change the customizing! What should i do? I cannot rember that a process is to activate anywhere.
The form and the interface are both active.
Thx for any help!
Best greetings,
Gregor

Hello!
Thx, i checked the SPRO. The valid checkbox is active.
In the backend system I am able to run the process. Before EhP5 we had EhP3 - is there any new customizing for the processes?
Thx and best greetings,
Gregor

Similar Messages

HCM Processes & Forms : Migrating from JSPs to Web Dynpro for ABAP

We are pretty well invested in HCM Processes and Forms. We currently use JSP based forms as the UI for our notifications. We do not, use Adobe Forms.
For a number of reasons, we want to transition to forms based in Web Dynpro for ABAP.
We want to bring a new scenario online using WD4A. Down the road, weu2019ll very likely transition our old JSPs over to the new methodology as well.
I would expect that this is pretty well doable. As part of a proof of concept, we did launch notifications from the web dynpro environment, had them initiate workflow, etc . Weu2019ve also pulled up our web dynpro app from the UWL and portal.
Has anyone gone through this specific exercise u2013 moving from JSPs to WD4A? We are particularly interested in where the integration points will be, working with ISR_PROCESS_EVENT, etc.
Your comments, suggestions, references, etc. are welcomed, as well as any discussion you may offer.
Thanksu2026
...Mike

And along the same lines, any thoughts around which of the following QISRDPROCESS_TYPEs might be a better choice?
Entry Using ITS Service
Entry Using Adobe PDF
We currently use the ITS Service type. I think this may be our first direction, replacing url links with links to our webdynpro application which woulds need to integrate calls through ISR_PROCESS_EVENT
The Adobe Type seems interesting - Again, we do not, nor will, have Adobe Forms in place for this development. But, I've read some discussion that folks have enhanced out of actual Adobe Form rendering.
Again, the thoughts of the community are welcomed here.
Thanks...
...Mike

Error while editing standard HCM Processes & Forms

Hi experts,
I would Iike to test the standard HCM processes & Forms & for which I have imported the standard forms from Client 000. I have also configured the ADS & have tested the credentials as well. Everything is fine & new custom ADOBE interactive forms (Not HCM Forms) are working fine through WDA. When I test any of the standard processes using HR Administrator role in Portal, I am able to select the relevant standard process (e.g. TERMINATION) for a given employee, but when I click on the Edi Process button, the system generates an error (short dump): "'WebDynpro Exception: ADS call failed ". I have checked OSS, but did not find any suitable note for it. I have the HR administrator role assigned in the back end & have confirmed that the ADS configuration as well as credential are working fine using the recommended reports. We are on EhP4 SP06.
Appreciate if anyone has already experienced these probelms & can suggest any solutions. Thanks in advance.
Best regards,
Sameer

Sameer,
To me it appears that ADS is conencted to only backend ECC not to the portal system.
Please try below:
1. Launch WDA for HCMPF in SE80 with appropriate parameters and see if this displays interactive adobe form when you click in edit button.
2. May be test the ADS connectivity to portal system.
regards
Sridhar Kandisetty

HCM Processes & Forms PD Backend Service

HCM Processes & Forms
SAP_PD service (OM New Position Object IT1000, New Org. Unit Object(IT1000) and Relations between Position & Org. Unit(IT1001-A003 and/or A012 )
--- OM Data Create Position Object and Create relation with already existing org. unit, process form shows u201CProcess Completedu201D. When I check transaction log t-code : slg1 " The number indicated is not in any valid external interval" and " S 30117940 not found"
This same case is working fine, if I removed the internal number range (just try), it is creating using SAP standard number range '5XXXXXXXX' , it has been created object 'S' and relation with 'S' - 'O'.
I have created the process form with the following cases with internal number range is working fine.
1) Create Position using SAP_PD standard OM service u2013only object
2) Create Org. Unit using SAP_PD Service -- only Object
3) Using exisiting Org. Unit and Exisiting Position create relation -- only relation.
I am working a requirement same as Process: HR_PD_CREATE_POSITION but no hope.
If anyone knows about the new object with relation, why internal number is not working or any configuration may I missed!!!
Thanks & Regards
SAMY
Edited by: Ranganathan Pazhanisamy on Feb 1, 2011 8:35 AM

Dear Sameer,
The note 1098009 - Limitations for Web Dynpro ABAP doesn't say anything that you can't do.
I made a brief analysis and didn't see any issue (regarding the note). Check it out in a more detailed manner to see if there isn't a limitation.
I hope this has been useful.
Kind Regards,
Maurício.

Unable to test a FPM form based process in HCM Process & Forms ?

Hi Experts,
Am new to HCM Process & Forms, I created my first form on FPM and am trying to test it but am not able to do so.. can you all please help me figure out where I am going wrong.
Here is what I am doing ...
I have a build a FPM Form Scenario and Process. Now when I clicking on the Execute button in HRASR_DT and go the test screen I dont get the option for selecting the Web Dynpro Screen as Application Start Option.
I also tried testing it through
http://OURSERVER/sap/bc/webdynpro/sap/asr_process_execute_fpm?sap-language=EN&sap-wd-configId=ASR_EXECUTE_5_STEP_PA
and
http://OURSERVER/sap/bc/webdynpro/sap/asr_process_execute
when I do this then I am getting an error message "No Internal Service Request scenario was specified".
Please Advice.
Thanks

Hi Sahir,
Yes, I had to Activate the business function HCM_ASR_CI_5 to get the "Option for Application Start" section in HRASR_DT.
Thanks for the launchpad configuration link.
The one think that I am still having issues is that if I goto se80 and selected the WD Application ASR_PROCESS_EXECUTE_OVP and using the Application configuration ASR_PROCESS_EXECUTE_OVP_CFG I execute it by clicking on Test....I get an error message saying
"Process does not exist"
Does this mean I can't test my process through se80 I will always have to go through portal and configure the launchpad to test my process ?
Or am I missing some config or doing something wrong ?
Regards
Chayan

HCM Processes & Forms - Infotype 0008

Hello,
I am working on a scenario where a salary change is being done through HCM Processes & Forms. The salary that changes is in a wagetype (0001). There are other wage types that are also in infotype 8. How can I make sure that I can add more than 1 wage type in this scenario? Right now, if I only add one wagetype, it doesn't copy the wage types that are in the previous record (which is what I thought it would do).
So, as an example:
On date - 1 we have : 0001 - 4,000, 0100 - Indexed to full time salary, 0200 - indexed 12.50 %
On date we have: 0001 - 4,200
We want to have: 0001 - 4,200, 0100 and 0200 - 12.50%
TIA
Jaron Frenk

Hi Chris,
We have a similar requirement to update infotype 0041 records.
I think you simply use the same field to pass to your service to different fields but you change the index for each time you use it. You can see this in the sample processes SAP provides.
Could you explain a bit on the above ' index' ? What index are you referring to?
Also, if possible could you reply with the sample processes in SAP which you were referring to?
Thanks in advance,
Deepa

HCM Processes & Forms Cost Assignments Defaults

Hello Everyone,
I have a question about making Cost Assignments for Infotyps like "Additional Payment" (0015) or "Employee Remuneration Info" (2010) within a Processes and Forms Scenario. This is really a huge requirement for us because the hole Company is split in several subsidiaries so we need to book the costs to different cost objects.
In the Backend World (PA30/PA61) when creating a record for either one of the Infotypes I can choose the Option "Maintain cost assignment" so I can define a different cost object where the costs of the created record should be booked.
I know the data of the cost assignment get's stored in the tables ASSHR & ASSOB. But as I'm using the SAP Backend Services SAP_PA and SAP_PT I can't make any DB update/insert statments after the records are created.
Did anyone implemented a Scenario like this before?
Would be awesome if someone could give me an advise.
Best regards,
Tobias

If the infotypes in question are standard PD infotypes you could use SAP_PD service to update them.
For any other tables you will have to go with a advanced generic service or do the update in a background workflow task.
Refer here to the post by Christopher Solomon's Profile | SCN: http://scn.sap.com/community/erp/hcm/blog/2012/08/20/hcm-processes-forms-when-all-else-failsadvanced-generic-services
Hope this helps.
Regards.

HCM & Process forms

Hi Experts,
I am new to HCM & Process forms could you please provide the information about HCM & Process forms, and how they are useful.
In which requirements we have to use these HCM & Process forms.(Send me some important links regarding the HCM & Process forms).
Thank you,
B. Raghu Prasad.
Moderator Message: Please search before posting.
Edited by: Suhas Saha on Oct 5, 2011 3:52 PM

Hi Aakash,
Yes, in my case it was an authorization issue. Try assigning the role SAP_ASR_MANAGER to the manager in the ECC.
Regards,
Manish

Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days

Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days, is there any problem ideally or, please leave a reply
<Email Edited By Host>

Hi vivekanandanganesan,
Thanks for using Apple Support Communities. This article has some steps you can try if you are unable to connect to the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
- Ari

What The Meaning Of Sorry, this Adobe product is currently not available for sale in your country

What The Meaning Of Sorry, this Adobe product is currently not available for sale in your country

And, um, what country are you currently in (connecting from)?

The FM "DD_DOMA_GET" not released for 'remote' calls.

Hi,
When I try to import RFCs from my CRM system in XI, I am getting the following exception:
com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: The function module "DD_DOMA_GET" not released for 'remote' calls.
Solution please!!
Regards,
Mahesh.

Hi,
Making remote enabled will solve this,
see my reply(Anirban) and jacob's reply in this thread(although this was with idoc)
Unable to import SAP objects
For, <i>We tried to make it Remote Enabled but it asks for "Access Key". How to go further?
</i>
You need a devloper access key for FM, in SE37
you can get one in market place, follow this thread,
Whats Development Key
Regards,
Anirban.

Function module WWW_ALV_CALL is not released for the Internet

Hi
I am facing this error Function module WWW_ALV_CALL is not released for the Internet and Only user SAP can release the function module.
Best Regards
GAGAN

hi,
This Web based calls are not available anymore in Netweaver 2004s/7.0.
More information in SAP-Note: 910202
Hope this helps
regards
Tobias

DME - it is not released for customers

Hi friends,
I am getting error when i am executing F110 with the help of DME. Payment document is generating but i am not getting the file which i have to send it to bank. This is the error i am getting it "Format tree 8301:DME FOR OUT GOING PAYMENT of tree type PAYM was delivered by SAP; however, it is not released for customers. SAP does not guarantee that the corresponding formats are mapped correctly for format trees with this status".
we are using SAP 4.7 EE version. Even i have gone through the SAP note. 656591. But i couldn't fine any help. Please help me if anybody faced the same kind of problem.
Thanks,
Rams.N

Use the keyboard shortcut Command + Option + Esc That will prompt the Force Quit window.
Or click Force Quit from your Apple menu  drop down menu.
Mac OS X: How to quit an unresponsive application using Force Quit

Save button on GUI does work in ver. 5, IE_Tab not released for ver. 5

I was recommended that I should be able to use FF - but the saving button on the GUI for the data portal does not respond and the IE_Tab is not released for the latest version FF
:-) Ole

IE Tab V2 (FF 3.5, 4, 5, 6, 7+) 3.5.9.1
* https://addons.mozilla.org/en-US/firefox/addon/ie-tab-2-ff-36/
IE Tab Support Forum
* http://getsatisfaction.com/ietab/products/ietab_ie_tab_2_for_firefox
* http://getsatisfaction.com/ietab/topics/ietab_on_firefox_5
Check and tell if its working.

Query not release for OLE DB

Hi..Experts
I need to design a query say Q1, Its taking prod order through a replacement path Query Q2,which is
restricted by Cal month variable.
As i check Query Q1 for allow external uses, Its giving error " Query not releases for OLE DB"
But when I restrict Q2 by fixed month then there is no error....but this is not fulfill my requirement.
I need Q2 should be restricted by Cal Month variable...
What I have done is.....first I restrict Q2 by fixed month. then Q1 query executing perfectly.Once Q1
is executing again i restrict Q2 by cal mont variable. Then also Q1 is running fine, even though it is checked allow
external Access.
I also execute Q1 query in RSRT without using cache . It is working fine. But as I open Q1 on another day is not working, WHY?
I am not getting....Please help me...
your comments will be appreciated..
Edited by: Abhishek@maventic on Jul 8, 2011 3:10 PM

Check whether this helps you
[OLE DB for OLAP|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6a8eb390-0201-0010-8fa3-b70f6f9a17c1?quicklink=index&overridelayout=true]
thanks
G. Lakshmipathi

HCM Process&Forms EHhP5 "proces is currently not released for execution"

Similar Messages

Maybe you are looking for