HD 4:3 Sony - 32HS510

I have a Sony 32 inch HD TV (Model 32HS510) that is 4:3 aspect; it has only DVI and two component inputs that are available for HD sources; It also has a 16:9 enhanced feature that allows for enhanced picture resolution for widescreen sources - originally meant for DVD titles - I have my Comcast HD Cable box / DVR going to the DVI and a DVD player going to one of the two component inputs; I will hook the AppleTV when I get if from FedEX tomorrow (by 10:30 am) to the other component input. I will then post whether this works and how well it works. If anyone else happens to have this unit and has already tried hooking the AppleTV up to the TV, please let us know how it works. Thanks

Well to my relief the Sony KV 32HS510 HD TV with a 4:3 aspect works great; the enhanced picture resolution for widescreen sources works great for movies - TV programs are shown in 4:3 with a black border around the image - but that is to be expected; v.v. good picture;it took a total of < 5 minutes to set up the TV- not counting the syncing - I don't know how long that actually took because I did sneak home at lunch for just a few minutes to set things up and the sync took place while I was back at work. I have not yet tried streaming - just played with the unit for a few minutes. I'll provide more information if requested or if I stumble across any interesting issues.

Similar Messages

  • Unable to capture Canon HDV footage with Sony v1u camera

    I'm trying to capture hdv footage filmed with a canon video camera with my sony v1u.  My sony footage captures as it should, but the canon footage, although playing fine on the sony camera, will not capture to cs4.  Any suggestions? 

    Check all camera settings and make sure they match the original filming mode on the other camera... and veryify your PPro settings match
    If that doesn't work, try http://strony.aster.pl/paviko/hdvsplit.htm

  • Unable to capture HDV in FCP 6.0.1 from Sony HVR-Z1P

    Hi I'm attempting to capture HDV footage from a Sony Z1.
    I am trying to capture some HDV footage I shot with the Z1, but FCP simply refuses to recognize the Z1
    I'm certain I've got all the settings correct:
    - Camera is set to HDV firewire out
    - capture presets is set to HDV
    - device control preset is set to Sony HDV FireWire
    - sequence preset is set to HDV 1080i50 (I'm in Australia)
    - footage IS HDV 1080i50
    But I keep getting the "Unable to Initialize Capture Device and Device Control" popup. I've tried everything
    - rebooted the camera
    - restarted FCP
    - rebooted the system
    - changed the capture/device control settings in FCP and tried out a regular DV deck to make sure it wasn't the cable
    Nothing has worked.
    I'm on a MBPro I7. No Kona card or anything like that, just trying to capture through firewire.
    Any suggestions would be greatly appreciated.
    Thank you,
    Matt
    At present it will capture HDV in IMovie but not FCP 6.0.1
    Message was edited by: Matt Blyth

    Thanks Adrian, since posting the thread I've thought of that too but unfortunately to no avail. From other forums I've read this seems to be a central theme to the solution to my capture woes. I since have sorted the problem it was in Audio/Video Settings.
    In the end I set my Audio/Video Settings to:
    Sequence Preset to: Apple Intermediate Codec 1080i50
    Capture Pre-HDV- Apple intermediate Codec
    Device Control Preset: Sony HDV 1080i50 Firewire
    And hey presto my I'm capturing HD without any problems. Thanks everyone for your suggestions.
    Message was edited by: Matt Blyth

  • Macbook to Sony Bravia - Problems

    Hey -
    So I'm trying to connect my Macbook (I got this back in like 2006-2007?) to my Sony Bravia TV. I have the current set-up:
    VGA Cable connected from the back of the TV to a Mini-DVI-to-VGA connector to the MacBook. When I plug it in, the Macbook detects it (since I can see the MacBook screen adjusting to it) but when I go to find it on the TV (Input/Source), the "PC" option is grayed out. I've been trying everything (Detect Display, etc) for the Bravia to detect it but no dice. Any help would be great.
    For the time being, I'm using a S-Video to Mini-DVI-to-S-Video adapter to the MacBook but the quality is really poor (except when watching movies).
    Is there something else that I need to do?
    Thanks!
    Albert

    hello, people.
    I'm trying to sync my mac to Sony Bravia as well.
    And it was tough.
    But on my last try I find a way.
    You have to put a resolution 640 x 480 on your mac
    and 1920 x 1080 on Sony TV.
    After that, you have to go on menu of your TV and follow the steps:
    ajustes > canais de entrada > controle de entradas
    I know the names in portuguese.
    But in english should be the same.
    And set you PC from AUTO to "SEMPRE"
    The TV is already set on AUTO (automatic)
    It works and I really happy.
    I wish it works for you too
    Good luck

  • Cannot Connect Imac 24" via mini dvi to HDMi adapter cable to Sony Bravia 3

    Hello Everyone,
    I'm having the worst time in trying to connect the following:
    1. Imac 24" 3.06 dual with dvi connection
    2. Mini dvi to HDMI adapter (this mac with this connection was produced only for a short while!).
    3. 10' (foor) HDMI wire
    3. Sony Bravia 32" model KDL32L-5000 with 3 HDML connections
    i.When I wire everything up, I keep getting"no signal" on my Sony Bravia TV.
    ii. It doesn't matter whether I connect the HDMI wire to HDMI 1,2, or 3 on my Sony
    iii. On my Imac Hard Drive>>Applications>>System Preferences>>Displays
    all I get is a list of different resolutions. There is no mention or mirrors etc.
    Nothing happens when I press "Gather Windows" or Detect Displays"
    Can someone out there please help!!!!!
    Can you also give any solution in very simple and small detailed steps!
    Thanks,
    Stacey Bindman
    Montreal

    Majortrout, there is a major disconnect going on here.
    1. You are showing an Ebay link with a mini-DVI to HDMI adapter.
    2. You report that you have an Early '09 24" iMac.
    3. That iMac does not have a mini-DVI port. That iMac has a mini-DispayPort.
    4. You need a mini-DisplayPort to HDMI adapter.
    It is physically impossible to attach the adapter to which you link at Ebay to your iMac. So you need to take a step back and figure out what you really have; which iMac, which adapter, etc.
    Dah•veed

  • How to connect a Sony Bravia TV to the internet through your Airport network

    Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
    My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
    Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
    The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

    I have now had a detailed reply from Sony Europe and the way to do this is to:
    1.       Press Home on the TV Setup
    2.       Use the right and left arrow to select Setting.
    3.       Use the up and down to select Network, press Enter.
    4.       Select Network Setup.
    5.       Select Wireless setup.
    6.       Select Scan
    7.       Select your network
    8.       A new screen will appear asking for entering the security key.
    9.       Enter your WPA2 key.
    10.   Select Enter.
    11.   It will take you back to the same screen asking for entering the
    security key.
    12.   Press the right arrow.
    13.   Select Auto.
    14.   Press the right arrow.
    15.   Select Save and connect.
    These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

  • Airplay with Sony RDp-AX900 no longer working

    Running off a Standard MAc 21".. 2011 model ... just upgraded the box to Mavericks
    Trying to use spotify or Itunes and just want output to go the the external Sony  airplay speaker..
    Works fine to Apple TV sitting next to it - it  sees the Sony but when you select it it just pops back to the Internal Speaker Option ... Thoughts? All working before the Upgrade...
    Ended up connecting via BT to the Sony but thats just a fudge really...

    Yes I did all the easy stuff first. I even re-installed Mavericks incase a special file was missing. I've totally reset my AirPort Express several times. It's what's transmitting my WiFi and it's super close to my iMac.
    It's deffinitely a problem with my iMac seeing as it's not working with both my AirPort Express and Apple TV, also can't access Shared movies on my iPad via Home Sharing so yeah... definitely my iMac. All those other things communicate to eachother just fine.

  • FCP 6 no longer 'sees' my Sony HDR-HC7.  Works perfectly with iMovie HD

    I used to be able to capture from and print to my HC7. Setup was saved. Now, FCP doesn't 'see' the camera with the saved settings, or when I try setting it up again from scratch. Camera connection, driver, etc. are good in that the camera works perfectly with IMovie HD. Obviously I've messed something up in FCP, but I can't find it. Suggestions?

    Thanks for the response SDIllini, unfortunately when I do go the Disk Utility, my camcorder isn't even show for me to even repair the disk permissions. As monty jr stated, Sony was no help for me either, they also told me that I would need to contact Apple. The problem still remains unsolved though, it's as if the MBP just doesn't recognize the camcorder whatsoever. I'm open to any suggestions, have anymore?

  • I forgot pattern lock on my Sony Xperia Z1 and i need it back

    Hello,
    on my sony xperia z1 phone i forgot my pattern lock. I can't use the Forgot Pattern Lock because it uses Wifi conection which i can't connect to...(my screen is locked) I want to hard reset it somehow but i tried allmost every method on the internet but none of them were working I tried holding the volume up and these things....but as i said it won't work for me. Can anyone please help me? THANK YOU VERY MUCH

    In order to fix this you need to perform a system repair
    Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
    Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the onscreen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
    If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • Adobe and Sony Photoshop Elements Serial Number Ping Pong !

    Hi
    I wanted you all to know what is going on.
    See below my first 'ANGRY' support message I sent and their replies - actually this offer tipped me to buy this laptop instead of another one and I did contact SONY several times and they pretended not to understand and in their website is stated and listed as 'included programs'.
    It is a trick to make customers buy their product? Sometime ago offers were 'real' offers.
    IS THIS EVEN LEGAL ? A purchase is a contacrt the buyer/the sellers and its suppliers (Adobe!)
    Next time, it will be a Toshiba (again!) - it has lasted me 5 years or had labour and it still is going - it stillis working and on Linux this time!
    Saturday, 17 October 2009 10:49:44 o'clock BST - Product registration
    ===================================================
    Hello
    I have just purchased a SONY VAIO with these programs bundled/installed/no doscs/no licence!
    I wish to:
    1. register them and I cannot since your program only show 5 groups of digits instead of the 6 needed!
    2. I wish to install Linux on this computer, but I cannot install PSE7 and Adobe Premiere E 7 without a licence!
    Which should have been part of my purchase.
    I feel I have been robbed.
    As soon as you run it, your programs connects and show us the 'called option' to purchase upgrade to version 8 - are you trying to make us pay twice for the same programs?
    What is the solution here? I spent hunfdreds of  £££ during the years 'macromedia too to get treated like this?
    ADOBE first reply - Wednesday, 21 October 2009 15:57:09 o'clock BST
    ====================================================
    Hello
    Thank you for contacting Adobe Support. We apologize for the delay in
    responding to your issue.
    I am responding in reference to your case no. ****** dated 17/09/2009.
    First let me thank you for using an Adobe product and also let me assure
    you that together we will try to find a resolution for this issue.
    Regarding your issue, we have discovered that this issue requires
    customer service handling and we have escalated the case to the right
    department to resolve.
    Your new CS Web Case number is *******.
    We are closing this case as TS has nothing to do in this case.
    Customer Services Reply -Friday, 23 October 2009 07:11:59 o'clock BST
    =====================================================
    Thank you for contacting Adobe Customer Service.
    The software you received is part of an Original Equipment Manufacturer
    (OEM) bundle. You need to contact the company that distributed the
    bundled software to get your serial number and documentation.
    They have licensing rights to distribute these products and are
    responsible for supplying you with a serial number.
    For information about Adobe product purchasing options, registration,
    trial software, upgrades, licensing and other services, please visit our
    Customer Service Center at: http://www.adobe.com/support/service/
    =====================================================
    This is what you get to have been a faithful customer that spent £££ in the last 6/7 years or more - before with Macromedia and then with ADOBE !
    What do you think?
    I feel robbed and I am now using GIMP - which better than PSE7 and competitive to PShop Professional.
    Sorry Adobe, but this case is not closed!
    Wrong person to play with.
    As soon as I have time a website will come out with all these stories - I will gather them all and them publish them.
    I am a honest person and democratic and I do not like to be treated like this and I do not trea any of my customers like this, even if some deserve it!
    Mobon

    Dear Barbara
    Thank you for your reply.
    Either Sony or Trade Standards, plus advertising on MoneySavingExpert and
    Watchdog and so on.
    Just a few millions will see the way your partnership with Sony works, in
    order to 'force' sell your products!
    Kind Regards
    Mauro
    PS ... and comes Europa! It is so silly to get into trouble to save money
    and get customers this way, very silly - I miss Macromedia.

  • Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. How do I get and install the right version of Camera Raw?

    Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. I was told to update Camera Raw to at least 7.2. I tried to download this but got a DNG Converter instead. Where is Camera Raw? (it does not show up in a search of my hard drive. There is a folder of camera profiles but no extension or plug-in with this name). How do I find out what version I have already? How do I get the correct version?  . . . OR . . . is it the case that Bridge will never open Sony raw files directly and I will have to do a separate conversion process every time I want to use a raw file??. Can someone explain this?
    Thanks.

    A Good samaritan answered this for me on another forum
    How to update Camera Raw

  • Adobe Photoshop Elements Organizer Stops Working due to Sony AVCHD files

    Hello I installed Adobe Photoshop elements and have been having trouble with it crashing.
    To solve this problem I deleted my Catalog and added a Catalog with only one folder.
    This folder has photos, in JPEG and Sony .ARW format as well as AVCHD files.
    I found that by removiing the AVCHD files from the catalog the SW would no longer crash.
    This really is not a practical solution since my PC has many folders with many AVC files.
    I am trying to see if there is a SW patch or another way to address this issue.
    Thanks,

    It might work but this is not a practical solution.
    I have many picture folders on my pc and several of these have AVC files.
    My intention was to use Photo Shop Essentials to edit my pictures. Unfortunately the "Organizer" app crashes when trying to work with my Catalog.
    I have narrowed it down to only happening when there are AVC files in my folders. I have seen others have this issue and I found the issue by what they recommended.
    Sadly if I am unable to get this to work with my current folders I will have to dump Essentials for another application.

  • My sony hdr-xr150 - can not see all clips in iMovie

    I have used my iMovie for over a year (love it and upgraded). But lately when I go to the "import" from my sony camera it only shows old clips.  A month ago all the clips would eventually show- but now nothing in the last 8 months shows.  I even erased the old clips from the camera but the old clips show- nothing newer than Jan. 1, 2011.  I tried something beside iMovie on a pc and the same thing happened.  I know this is apple forum- and I feel its a sony problem- but I was hoping someone has had the problem.
    Thanks so much!

    Yes, you would, that's why I ask in advance if the camera appears on the Desktop as if it were like an External Hard Drive.
    If the Mac can mount your video camera on the desktop, then you make a duplicate or backup of everything on the camera by Option + dragging the camera icon to another postion on the Desktop. Then use the camera to reformat the internal disk. With a duplicate of the camera hard drive, you can try importing from that virtual disk instead of directly from the camera itself? That's what I'm thinking might help troubleshoot this somewhat more.

  • Can not capture from Sony HDV 1080i (recording in 60i)

    Hello
    We are trying to capture from the above camera to a Mac Dual G5. We are using FinalCutPro 5.1.2. We are using a FireWire 400 cable to connect to the front of the computer (have also tryed back of Cinema Display). The footage was captured in HDV1080/60i, and we have tried the corresponding formats in Easy Setup (Basic, standard, Apple Intermediate).
    The problem: we can control the camera from the Log and Capture windows, but when starting capture, no data is coming in, and the program therefor gives up after a few seconds (displaying a no data error message).
    We have tried Batch and Now capture. We can log clips, and get the correct time code, but can not capture those clips due to the no data problem.

    This is a good workaround for curing your camera recognition problem with FCP (if that's what it is):
    First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
    FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
    http://docs.info.apple.com/article.html?artnum=301852
    Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
    If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
    Still not working? Try a different Firewire cable.
    Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
    Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
    Let us know how you get on!
    Andy
    Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E   Mac OS X (10.4.7)  
    "I've taught you all I know, and still you know nothing".

  • Unable to capture "Sony Handycam" to iMac

    I bought Sony Handycam 2007 and worked on PC windows but this year I bought a new iMac computer but when I captured the video to iMac from the Sony Handycam and it won't open or work.... iMac said that I need to download software called MPEG or MPEG2, so umm do I need to buy a software or download free from internet??  Or do I need to buy new programe called "OS X Lions"  I'm new with iMac and patient to learn everything on iMac.

    If the Vista install was a standard installation, Vista should recognize the camera automatically and install the correct drivers. Nothing you need to do. Make sure that you connect the firewire cable first between the camera and the on-board firewire connector. Do not try to connect it to the ATI card. Once the cable is connected, turn on the power on the camera and set it to VCR. Vista will then install the necessary drivers automatically and if they have been installed previously, show the autoplay box. Make sure that the menu in the camera is correctly setup to use the iLink connection and the format you shot in, so either DV or HDV. Consult the Sony manual for that. If the does not work, try a different cable first.

Maybe you are looking for