Hd 6570 running 3 monitors

Hi
I have an HP Elite with an HP Radeon HD 6570 graphics card running 2 monitors and wish to connect a 3rd monitor.
1st monitor on the DVI port
2nd monitor display port to DVI adaptor
3rd monitor display port to DVI adaptor
3 x Iiyama 22” HD Screens running at 1920 x 1080
The spec for the HD 6570 indicates it will support 3 screens (http://h18000.www1.hp.com/products/quickspecs/1396​7_na/13967_na.PDF)
On connecting the 3rd screen only two work, you can combine any of the 2 from 3 indicating there is no hardware issue with the third port on the graphics card or the 3rd monitor.
I have updated to the latest catalyst driver from AMD’s web site.
What am I missing here? Any assistance would be appreciated.
Regards
Kevin

Hello Kevin_99,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are trying to connect a 3rd monitor to your HP Elite which has the AMD Radeon HD 6570 DP (1GB) PCIe x16 Card. I am providing you with a link to the AMD Radeon HD 6570 DP (1GB) PCIe x16 Graphics Card (QP027AT) - Specifications and Warranty page which states under the features that the card "Provides Dual-Link (DL) DVI-I and two DisplayPort output ports (useable at the same time)".
This indicates that the card supports only 2 monitors at a time, but that does not mean you cannot use more than one monitor. I am also providing you with an HP Support document: Using Two or More Monitors with One Computer (Windows 8), which states "If you must add a second video card to your computer to gain another video connection, make sure both video cards use the same Windows 8 compliant (WDDM) driver. One way to ensure this is to use the same video card model for both video connections.". This means you need to install a second video card (be best if you could install the same card so as to ensure compliancy).
If the second video card is not an option for you then you can also try to use the HDMI port use the DisplayPort in its native mode. To do this, simply buy an ACTIVE DisplayPort to DVI or DisplayPort to VGA adapter and connect your third monitor. A passive adapter (most of the cheap DisplayPort to DVI adapters) will not work as the card must rely on a compatibility mode that conflicts with the other 2 monitors.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a wonderful day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

  • Running Monitor on Windows Box... does it run as a service?

    I've installed GW Monitor 7 on a Windows box running IIS and Tomcat 5.5.
    If I am logged in to the Windows server and have the Monitor Console open
    I am able to use the web based GW Monitor. If I log out and/or close the
    Console I am no longer able to run the web based GW Monitor. Does the
    server really need to be logged in and have the GW Monitor Console
    running in order to use GW Monitor? Can't it run as a service?

    Very cool, thank you! I got the agent installed on Linux running as
    daemon and the Web Application running on Windows connecting over to the
    Linux agent. It works very well.
    Now to get the HA stuff working...
    > [email protected] wrote:
    >
    > > OK, can I install the agent on linux but have the web piece running
    on my
    > > Windows box?
    >
    > Well yes, but unless you need access to the "web piece" from the outside
    > world, there's really not much a reason to even install it. I just hit
    my
    > agent at port 8200 from inside and avoid the web piece. The web piece
    is
    > really being depreciated a bit, with most of the functionality being
    moved
    > to the agent's HTTP process. For the most part, the web application
    for the
    > Monitor agent is intended to allow you to access the system from
    outside of
    > your environment. If you need to do that, it's cool. You just need to
    > change the config file in the web piece to talk to the agent on the
    other
    > server.
    >
    > --
    > Danita Zanre
    > Novell Support Forums Volunteer
    > Are you a GroupWise PowerUser?
    > http://caledonia.net

  • DAC & Run Monitor

    Hi all,
    I am lunching the "JDE Financials - 811SP1-812" execution plan. Then all the task finish in DAC with any error but I open the workflow monitor and all tasks are with state "running/waiting".
    Also the DAC in all tasks the "Rows Successfully passed" always is 0.
    Did you find this situation some time??
    Thanks in advance!
    Víctor.

    ORA-12520: TNS:listener could not find available handler for requested type of server
    Failed to connect to database using user [obaw] and connection string [orcl]You should speak to your DBA, looks like it is a problem with the listener on the database
    This search engine is good for researching Oracle errors: http://www.miracleoy.fi/search.html and has quite a few links for ORA-12520 errors

  • Running monitor in svrmgrl

    If I try to start the "monitor" command in "svrmgrl" I get the
    error "MGR-04501: monitors are not available from the line mode
    Server Manafer", even if I start svrmgrl in an xterm!
    How do I have to start svrmgrl to let them know it is running
    in an graphical environment!?
    Where can I find a reference on svrmgrl?
    null

    : If I try to start the "monitor" command in "svrmgrl" I get the
    : error "MGR-04501: monitors are not available from the line mode
    I don't believe the line mode monitors existed since Oracle 6's
    sqldba.
    And the server manager monitors (windows server manager) only
    existed til about Oracle 7.2.
    Since then you need Enterprise manager, possibly even the add-on
    performance manager packs, to have "active monitor displays"
    (or write your own scripts to repetively query some info)
    If someone can tell me otherwise, I would appreciate it. That
    issue had irritated me at one point.
    Mark.
    [email protected]
    null

  • Getting no attributes changes after change run monitor program is executed

    Hi ,
    We have a z-program where we are calling function module RSDDS_CHANGE_MONITOR . The structure of this function module is changes after upgrade from  BI 3.5 to 7.0. Accordingly i have adjusted the z-program . But the result is No Attribute Change Run Found .
    The function module called  is as follows
    CALL FUNCTION 'RSDDS_CHANGERUN_MONITOR'
    EXPORTING
      I_WITH_DETAILS           = RS_C_TRUE
      I_T_CHABASNM             =
      I_T_HIEID                =
       IMPORTING
         E_TS_STATE_CR            = l_cr_state
         E_TS_CHANM_IN_AGGR       = l_t_chanm
         E_TS_HIER_CR             = l_t_hieid
       E_TS_CHABASNM_CR         =
         E_T_AGGREGATE_CR         = l_t_aggrstate
       E_TS_TREXAGGR_CR         =
         E_TSX_MSG_CR             = l_t_msg
       EXCEPTIONS
         ERROR                    = 1
         OTHERS                   = 2
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    The l_cr_state has the details of the status in BI 7.0
    But after upgrade , its empty.
    Pls help on the issue.
    Regards,
    Sarang

    go through this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/64/32a5682e6a4e0cbb3f8a33970d11a8/frameset.htm

  • Z68A GD65 G3/i2600k - is SLI on 1 monitor, run 2nd monitor on IGD possible

    Typically I only use 2nd monitor for reference, chat, etc during a game.
    I cannot get 2xGTX 470 to run 1 and only the 1 monitor, and the IGD HD3000 to run monitor #2.
    Is that because we cannot do so, and virtu only allows for switching ?
    Small hit, if any, I thought I had read that old limitation of using either/or was gone with Z68... wishfull thinking ?
    ld

    Probably wishful thinking. Only two choices, PEG or IGD. Virtu switching won't work when in an SLI configuration if my Z68A-GD80(G3) is any example.

  • My ASA5540 8.2.4(4) can not monitor and failover on certain interfaces

    the story is
    we configure the
    monitor interface  inside
    monitor interface  outside
    monitor interface  partner
    and save configue
    but when i show run monitor-interface
    the configure do not show the 3 montitor interfaces, it only show other monitor interfaces,which can failover , but not the above 3 interfaces,  however they are all showed  interface monitor in the ASDM configure
    here is the show version
    ==================================
    Cisco Adaptive Security Appliance Software Version 8.2(4)4
    Device Manager Version 6.4(5)
    Compiled on Thu 03-Mar-11 17:18 by builders
    System image file is "disk0:/asa824-4-k8.bin"
    Config file at boot was "startup-config"
    dcm-lidc-fw1 up 9 days 18 hours
    failover cluster up 16 days 20 hours
    Hardware:   ASA5540, 2048 MB RAM, CPU Pentium 4 2000 MHz
    Internal ATA Compact Flash, 256MB
    BIOS Flash Firmware Hub @ 0xffe00000, 1024KB
    Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                                 Boot microcode   : CN1000-MC-BOOT-2.00
                                 SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                                 IPSec microcode  : CNlite-MC-IPSECm-MAIN-2.05
    0: Ext: GigabitEthernet0/0  : address is 30e4.db7b.6f82, irq 9
    1: Ext: GigabitEthernet0/1  : address is 30e4.db7b.6f83, irq 9
    2: Ext: GigabitEthernet0/2  : address is 30e4.db7b.6f84, irq 9
    3: Ext: GigabitEthernet0/3  : address is 30e4.db7b.6f85, irq 9
    4: Ext: Management0/0       : address is 30e4.db7b.6f86, irq 11
    5: Int: Internal-Data0/0    : address is 0000.0001.0002, irq 11
    6: Int: Not used            : irq 5
    7: Ext: GigabitEthernet1/0  : address is 30e4.db02.1f96, irq 255
    8: Ext: GigabitEthernet1/1  : address is 30e4.db02.1f97, irq 255
    9: Ext: GigabitEthernet1/2  : address is 30e4.db02.1f98, irq 255
    10: Ext: GigabitEthernet1/3  : address is 30e4.db02.1f99, irq 255
    11: Int: Internal-Data1/0    : address is 0000.0003.0002, irq 255
    Licensed features for this platform:
    Maximum Physical Interfaces    : Unlimited
    Maximum VLANs                  : 200      
    Inside Hosts                   : Unlimited
    Failover                       : Active/Active
    VPN-DES                        : Enabled  
    VPN-3DES-AES                   : Enabled  
    Security Contexts              : 2        
    GTP/GPRS                       : Disabled 
    SSL VPN Peers                  : 2        
    Total VPN Peers                : 5000     
    Shared License                 : Disabled
    AnyConnect for Mobile          : Disabled 
    AnyConnect for Cisco VPN Phone : Disabled 
    AnyConnect Essentials          : Enabled  
    Advanced Endpoint Assessment   : Disabled 
    UC Phone Proxy Sessions        : 2        
    Total UC Proxy Sessions        : 2        
    Botnet Traffic Filter          : Disabled 
    This platform has an ASA 5540 VPN Premium license.
    ==========here is the show monitor interface, it does not show outside/inside/partner====================
    -fw1# sh run monitor-interface
    monitor-interface app
    monitor-interface dmz
    monitor-interface data
    monitor-interface dev-app
    monitor-interface dev-data
    no monitor-interface management
    -fw1#
    -fw1(config)# sh run all | in monitor
    banner motd *  This is a private and monitored system.      *
    monitor-interface app
    monitor-interface dmz
    monitor-interface data
    monitor-interface dev-app
    monitor-interface dev-data
    no monitor-interface management
    ===============failover test =============
    - unplug the outside interface cable on primary , led go off, but failover does not happen-
    - upplug the cable on inside, or parner , it still do not failover
    - only unplug the cable on other monitor interface , it failover. 
    =======clear config monitor-interface, and enter monitor-interface command for all the interface, re test, again, same result=======

    fw1# sh failover
    Failover On
    Failover unit Secondary
    Failover LAN Interface: failover GigabitEthernet1/3 (up)
    Unit Poll frequency 1 seconds, holdtime 15 seconds
    Interface Poll frequency 5 seconds, holdtime 25 seconds
    Interface Policy 1
    Monitored Interfaces 8 of 210 maximum
    Version: Ours 8.2(4)4, Mate 8.2(4)4
    Last Failover at: 15:44:00 EST Nov 24 2011
            This host: Secondary - Standby Ready
                    Active time: 767625 (sec)
                    slot 0: ASA5540 hw/sw rev (2.0/8.2(4)4) status (Up Sys)
                      Interface outside (209.202.65.132): Normal
                      Interface inside (10.100.161.2): Normal
                      Interface app (10.100.171.2): Normal
                      Interface dmz (10.100.172.2): Normal
                      Interface data (10.100.173.2): Normal
                      Interface dev-app (10.100.174.2): Normal
                      Interface dev-data (10.100.175.2): Normal
                      Interface management (10.7.4.9): Failed (Not-Monitored)
                      Interface partner (10.100.160.14): Normal
                    slot 1: ASA-SSM-4GE hw/sw rev (1.0/1.0(0)10) status (Up)
            Other host: Primary - Active
                    Active time: 77823 (sec)
                    slot 0: ASA5540 hw/sw rev (2.0/8.2(4)4) status (Up Sys)
                      Interface outside (209.202.65.131): Normal
                      Interface inside (10.100.161.1): Normal
                      Interface app (10.100.171.1): Normal
                      Interface dmz (10.100.172.1): Normal
                      Interface data (10.100.173.1): Normal
                      Interface dev-app (10.100.174.1): Normal
                      Interface dev-data (10.100.175.1): Normal
                      Interface management (10.7.4.8): Normal (Not-Monitored)
                      Interface partner (10.100.160.13): Normal
                    slot 1: ASA-SSM-4GE hw/sw rev (1.0/1.0(0)10) status (Up)
    Stateful Failover Logical Update Statistics
            Link : failover GigabitEthernet1/3 (up)
            Stateful Obj    xmit       xerr       rcv        rerr     
            General         1001073    0          443701     25       
            sys cmd         194284     0          194283     0        
            up time         0          0          0          0        
            RPC services    0          0          0          0        
            TCP conn        262196     0          45389      2        
            UDP conn        342196     0          47480      3        
            ARP tbl         202397     0          156529     20       
            Xlate_Timeout   0          0          0          0        
            IPv6 ND tbl     0          0          0          0        
            VPN IKE upd     0          0          10         0        

  • Mac mini compatibility with 1600x900 Samsung monitor?

    I have just purchased a Mac mini Z0FW-2GB (2GHZ 2GB DDR3 RAM/120GB drive) and would like to pair it up with a Samsung 2033SW 20-inch with a resolution of 1600x900
    Does anyone know if this monitor / resolution will work natively with Mac mini? Does the necessary connector ship with the Mac mini?
    Thanks.

    A Mac can automatically configure itself for any resolution on-the-fly based on whatever EDID (display driver data) it receives from the monitor it is connected to. That is, for example, why all Macs, even older ones, are successfully running monitors like the new 2048 x 1152 ones that have recently come into the market. Even though older Macs may pre-date the existence of that new and never previously existing format by several years, they are still able to read the EDID and self-configure their graphics output into any resolution. For this reason, I doubt you will have any trouble with a 1600 x 900 monitor.
    And, yes, everything you will need comes with the Mac mini (Mini DVI to DVI Adapter) or the monitor (DVI cable), so you won't need to buy anything extra.

  • Mac Pro and 3 monitors??

    guys:
    Back again for more of your expertise. I am on a Mac Pro (2009 early) running OSX 10.6.2, 2.66 Ghz Quad processor, 8 GB RAM, with an ATI Radeon HD 4870 video card and 512 MB VRAM.
    I currently run two monitors, one being an Eizo CG222W and the other being a cheapie NEC AS191WM.
    I want to get a Wacom Cintiq monitor for retouching work. (I am a photographer)
    So finally, the question...can I run all three at once or do I need plug and unplug the Cintiq as needed? I am assuming I need to install another video card. I can't run 3 monitors off of one video card...can I?
    Any recommendations? Any warnings about what I am intending to do? The Mac Pro has the ability to add another video card, doesn't it?
    I don't know if processing power of the Mac Pro has anything to do with running monitors but if so, does the specs of my machine have the power to do the job of three monitors?
    As always, a big thanks in advance for your help and info!!
    Matt the shooter

    I understand it is best to stay with the same brand for installing another video card
    Yes, for Boot Camp, but OSX is fine with mixed brands.
    but then I just read a post that stated there isn't enough power to run two Radeon ATI 4870 cards in a Mac Pro.
    True, but you could add a NVIDIA GeForce GT 120
    <http://store.apple.com/us/product/MC002ZM/A?fnode=MTY1NDA5OQ&mco=MTA4MzU2MzE>
    I'd like to run the Cintiq for retouching, the Eizo with the Photoshop tool palette and the NEC to have anything like Mail or Calendar open so I can handle appointments while I retouch. It that possible with two cards?
    It should work, but you may want to ask in a Photoshop forum to be sure. It may be necessary for all Photoshop windows to use the same card.

  • Best Temperature Monitoring Program?

    Hey all, first time posting in the forums.
    I recently got a mid-2012 MBP for college, so of course I immediately began putting games like Borderlands and GTA:SA on it. It runs anything I throw at it beautifully, but it gets awfully hot while it does. I know this is common for MBP's, even up to 90 degrees celsius, but it is something a tad worrisome when it gets over 80 (some games get it there every time....). So I've been trying to monitor it to at least be sure I'm not letting it get up there too often or for too long.
    So had a few questions about temperature monitoring with Macs. I've currently got 3 programs running monitor temperature and system usage- System Pal, iStat Pro, and SMCfancontrol (which I also kick up a bit when playing the more GPU intensive games). The problem is that all three show different temperatures. Right now SystemPal reads 41 degrees celsius, SMCfancontrol reads 49, and iStat Pro has temps between 30 and 42 degrees. Which one's right? Is there a more accurate/definitive program for temp monitoring?
    If it makes any difference, I usually play projected onto a 32 in LG TV using a thunderbolt to HDMI. I know this is more GPU intensive to begin with, but after going HD it feels a necessary evil.
    If anyone happens to know of ways to keep temps down while gaming, monitor temps during full screen apps/games, or ways to monitor GPU usage (right now I have none ) I'd greatly appreciate advice on that too!
    Thanks so much for answers!

    Try iStat Menus 4.02 or Temperature Monitor 4.96 or Hardware Monitor 4.96.

  • Monitoring with Server Manager?

    I start Server Manager in an xterm window with command
    svrmgrl
    and log in with system account. However, when trying to monitor
    the database, the following message appears (interpreted by
    oerr):
    [oracle@rxo log]$ oerr MGR 4501
    4501, 0, "monitors are not available from the line mode Server
    Manager"
    // *Cause: You attempted the MONITOR command from Server Manager
    line mode.
    // *Action: Start Server Manager in graphical mode to run
    monitors.
    So: What is the right way to use the monitor command. Should I
    start svrmgrl with some weird parameter ?
    null

    Risto Raitio (guest) wrote:
    : I start Server Manager in an xterm window with command
    : svrmgrl
    : and log in with system account. However, when trying to monitor
    : the database, the following message appears (interpreted by
    : oerr):
    : [oracle@rxo log]$ oerr MGR 4501
    : 4501, 0, "monitors are not available from the line mode Server
    : Manager"
    : // *Cause: You attempted the MONITOR command from Server
    Manager
    : line mode.
    : // *Action: Start Server Manager in graphical mode to run
    : monitors.
    : So: What is the right way to use the monitor command. Should I
    : start svrmgrl with some weird parameter ?
    Correct me if I'm wrong here, but I think the "l" in svrmgrl
    stands for "l"ine mode.
    Rob
    null

  • How to find what are all the rules and events are monitoring for specific server in SCOM 2007

    how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
    I need to know what are all the events, services, and rules are monitored for the specific server.
    Kindly help me friends.

    how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
    I need to know what are all the events, services, and rules are monitored for the specific server.
    Kindly help me friends.
    Thanks for the question Sandoss. This is something that we all come across at sometime.
    Thanks & regards, Sumit Agrawal
    The lack of this feature is an inexcusable oversight for an enterprise management product.  They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down. 
    BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server. 
    The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well.  I'd like some feedback if something is missing.
    DECLARE @srv varchar(30)
    SET @srv = 'your name here'
    SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
    case
        when s.HealthState = 1 then 'healthy'
        when s.HealthState = 2 then 'Warning'
        when s.HealthState = 3 then 'Critical'
        else 'N/A'
    end as Health
    FROM state AS s WITH (NOLOCK)
    left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
    left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
    where
    bme.FullName like '%' + @srv + '%'
    and s.HealthState <> 0
    and mon.IsInternalRollupMonitor = 0
    and mon.IsExternalRollupMonitor = 0
    order by bme.DisplayName, mon.displayName

  • Failure Upgrading Monitoring in GMS 2.0.1

    We just completed (incompletely) upgrading our Data Synchronizer from 1.2.5.299 to GMS 2.0.1. Everything appeared to go fine for the most part, except the monitoring. The server has been tested, and data is flowing properly, but we cannot get any stats off from the Dashboard.
    During the update, there is the following:
    shutting down GroupWise Mobility Service... done
    Updating prostgres settings... done
    Restarting postgres.....failed
    done
    <the rest of the upgrade goes fine until...>
    Updating Monitoring
    Failed upgrade monitoring: Failure in: su root -c "rcpostgresql restart"
    done
    A reboot of the server has postgreSQL working fine. However, we can't get our monitoring working until we can let the system restart it. For what it is worth, this was a problem when we were running Data Synchronizer also.
    The server originally started as a SLES10, and has been upgraded incrementally to SLES11 sp2.
    Any help is appreciated. I am still a Linux newb, so I may need some help in that area also (command-wise). Thanks in advance!

    Ok, I apparently can't find where to update my thread either. I did some searching on the forums, and found TID 7008132. I added the following lines to my pg_hba.conf file:
    local all postgres ident sameuser
    host all postgres 127.0.0.1/32 ident sameuser
    host all postgres ::1/128 ident sameuser
    Now, what that did, was that it enabled postgresql to restart properly. What it also did was bork the rest of gms. When doing a "rcgms start", I had some errors. It said:
    Checking for gms monitor: unused
    Checking for gms config: running
    Checking for gms engine: dead
    Checking for gms web admin: running
    Checking for gms agent manager: running
    Seeing the "dead" on the gms engine, I removed the lines and rebooted the machine. Everything came back up so it now reads:
    Checking for gms monitor: unused
    Checking for gms config: running
    Checking for gms engine: running
    Checking for gms web admin: running
    Checking for gms agent manager: running
    Monitor is still unused, but I believe that is due to the update.sh script not being able to restart PostgreSQL, and erroring out on the Upgrading Monitor section.
    To me, this all screams user or permissions, but I don't know where to begin for that.

  • HOWTO: Monitoring WebLogic Server with Hyperic HQ

    For those of you that administer WebLogic Server deployments, you may be interested in this HOWTO - it demonstrates how to get up and running monitoring your WebLogic deployments with Hyperic HQ. HQ auto-discovers WebLogic instances, thus shortening your time to deployment and delivering WebLogic metrics in minutes.
    To read the article:
    http://support.hyperic.com/confluence/display/hypcomm/Monitoring+Weblogic+with+HQ
    Download the open source (GPL) HQ:
    http://www.hyperic.com/downloads/other-register.jsp?product=hqfree
    Enjoy!
    John Mark

    can any one in the community please help for sorting out this issue.
    I have been with this error for a long time.

  • How to achieve romate-monitoring in Labview5.0?

    I want to monitor one system through internet ,but I don't know how to do it in Labview5.0,and wether should I build one net-station? should use what function of the Labview? in fact ,that is How to achieve the monitoring through internet? please experts tell me !thank you

    Hey there,
    National Instruments has a great solution to your application. Unfortunatlely, it is not in LabVIEW 5.0 integrated but in LabVIEW 6.1. In this latest version of LabVIEW 6.1 you can see/run/monitor a VI in a Web browser by running your application with the built in LabVIEW web server and by publishing your VIs to the Web - it will be simple and easy!
    I would recommend the upgrade to LabVIEW 6.1 - please check out the information on www.ni.com/labview and all the new features!
    Hope this helps
    Roland

Maybe you are looking for

  • Slow Shutdown on all Linux kernels but not on Linux-lts kernel

    Been having this problem since the beginning of my Linux experience with Arch. This is my uname -r output: 3.8.6-1-ARCH This problem only happens on Linux main kernel, and never happen in Linux-lts kernel. Tried using the method mentioned in the wiki

  • Uccx 8,5 outbound IVR unable to load contact list intermittently and other ?

    Good morning on our outbound IVR we seem to have problems importing the contacts page and sometimes when it does load it show the calls were successful, yet none of the numbers were dialed. when we import the contacts it will usually show the remaini

  • Need help with 'unable to open executable ... ' error

    After I compile I get this error. Here is the entire error msg: == error: unable to open executable '/Users/..MyName../Library/Developer/Xcode/DerivedData/BallsAway-dxopkhiuo..... .zemqfcgnldx/Build/Products/Debug-iphonesimulator/BallsAway.app/BallsA

  • Airplay Audio for TV Shows and Movies

    I just purchased Airport Express for Airplay using my MacBook Pro, iTunes and iHome speakers. My music and radio stations on iTunes stream to the speakers with no problems. The audio for TV shows and movies on iTunes will not stream. Airplay is set f

  • Hub 3 needs to be restarted every day to restore s...

    Hi Every day, our Hub 3 needs restarting to restore our speed. It has been constantly 37+ MBPS for months. Recently, both wired LAN and wireless connections have slowed to 3Mbps. Speeds checked on BT Wholesale Speedchecker, Lan and Wifi All ususal ch