HD Audio is not working in bootcamp windows in mac mini 2012

Update to the latest bios: https://forum-en.msi.com/index.php?topic=163918.msg1260356#msg1260356 (Follow the guide)
>>Clear CMOS<<
Afterwards update the Intel Management Engine Driver in Windows.
Reboot and afterwards install current Realtek drivers: http://www.msi.com/service/download/driver-22481.html

Similar Messages

ExpressCard/34 not working in BootCamp Windows 7 64-bit. Apple's BIOS emulation does not give enough resources.

MacBook Pro unibody, 15" 2009
ExpressCard/34 (Card is by Transcend TS-RDF1, JMicron chip for SD card) is not working in BootCamp Windows 7 64-bit. Windows reports:
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system."
Other data points: Card works fine in Mac OSX, worked under Windows XP 32-bit (initially reported same problem, but works after reboot).
Checking the forums there seems to be no actual device suggested to actually remove that would help the problem. And even if it was, the concept is ridiculous. What other device would you like to remove? Display adapter? Network adapter? No way. I use all available devices and don't want to compromise.
It seems like BIOS emulation does not allocate enough resources to ExpressCard.
Are others having the same problem?
Does anyone have a fix for this?
Is there anyone at Apple who cares to provide a solution?

It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
(added link to Sonnet's explanation)

Adobe flash does not work on bootcamp windows 2002 xp. down loaded to windows. works with Mac. No program folder for such. shows up in "add delete programs" (in setting) but without a file size. I have a MacBook Pro purchased new in June 2010.

Using bootcamp (windows 2002 xp) I down loaded adobe flash player from the windows platform. told me it installed successfully. however does not work in windows, does works in mac. in xp there is no created program folder for such or created short cut. In the control panel (xp) in add/delete programs it is listed but wihout any file size or frequency used. I've deleted & reinstalled numerous times. Mac OS is 10.6.8. Windows is 32 bit. Can't find a thing that discusses this. THANKS!

I just now posted it Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913

Firewire soundcards not working under bootcamp/windows (mbp unibody)

I am reading a lot about firewire sound cards not working on the new unibody macbook pros.
I am using sp3 and trying to use my konnekt6 sound card without any luck. Will apple address this issue or is there a hotfix for this?
Best regards,,
Mark

I have the same problem and i have tried numeral suggestion and trik with no success.
it seems that the firewire driver 1394.inf in the xp or vista is not fully compatible with the chipset in the mac. any solution?
the presonus sound card is not recognized as sound card on XP, but no vista it is recognized but caused the system to crash and freeze upon plug in

Graphite base station not working with my Intel Based Mac Mini and iPhone.

My Airport Express died after 2 years of use. I had to resort to plugging in my old but still functioning Graphite Airport base station. Since the set up assisant on my Mac mini does not work with the older base station, I used my G4 400 tower to set it up. I got it working and tested the connection. On to testing my iPhone. It sees the new network. Password is entered and the wifi icon shows full signal strength, but does not connect to the web. Next I try my Mac mini out on the new network and it too sees the network, but does not connect to the web. I double check the older G4 and the connection is still strong and fast. I shut the G4 down thinking that maybe the Graphite can only support one computer at a time, and the Mac mini and iPhone still can't connect to the web. I'm not sure what to do with this one. Is there a setting that I need to use? As far as security goes, the Graphite base station was set up with a WEP password. Any help would be great
Message was edited by: Soriano

I suggest using AirPort Admin Utility (version 4.2) to check the base station settings and change them, if necessary. (AirPort Admin Utility should be able to configure a Graphite base station from a computer running Mac OS X 10.4, even though AirPort Setup Assistant can't.)
In the Network pane of AirPort Admin Utility, please make sure that "Distribute IP addresses" and "Share a single IP address (using DHCP and NAT)" are checked, and that everything else is unchecked. I am assuming that the Graphite is the only router in your local network and that there are no computers connected via Ethernet.
The Access Control pane of AirPort Admin Utility should list either all of the relevant AirPort ID's or nothing. You can find the AirPort ID of an OS X computer by looking at System Preferences>Network>Show:AirPort>AirPort.
The Internet pane of AirPort Admin Utility should be set in accordance with your Internet provider's requirements. Most likely, it should be set to Connect Using:Ethernet and Configure:Using DHCP.
After verifying the settings, power down the computers, base station and cable or DSL modem for a few minutes, then start them up sequentially, leaving time for each to get fully up and running: first the modem, then the base station, and finally the computers.
The network preferences on the Mac Mini and the iPhone are also relevant. I assume that the preferences are unchanged from those that worked with the AirPort Express.
I hope this helps.

SL server share mounting not working for 10.7.4 Mac Mini

I'm running about seven Macs on a network with a 10.6.8 Mac Mini server.
The older Macs (PPCs and 10.4.11) mount the share immediately.
Newer Macs recently have had a problem.
My 10.6.8 MBP can mount the share, from a dock icon, but it can take minutes.
Another Mac Mini (10.7.4) now refuses to mount the share manually. It can't make contact with the server share. I've tried via Ethernet and WiFi. It just hangs with Connect to Server.
And yet, it has no problem with the iCal server running on the server.
Another older MB and 10.6.8, mounts the share immediately.
Has anyone had newer hardware with 10.7.4 develop server connection problems?

Hi iToaster,
These were all good tips, and I tried or investigated them.
As it turns out, I noticed my SL Mac server needed a Java and securtiy update.
After installing, mount time on my Lion and SL client Macs was near normal, not minutes. (Again, my older Macs had mounted the server share quickly and normally, when the newer ones did not.)
My suspicion is that a modern OS sensed that the Java and security updates were not in place and took extra time to check the share mount in some manner.
Thank you for your time, experitse and ideas, iToaster!

HT202638 Can I record the audio from a cassette player (portable) into my Mac Mini 2012?

I have several old cassette tapes that I'd like to digitize. Can I do that by playing the tapes on a portable cassette player plugged into the audio in port on the back of my 2012 Mac Mini? If I can, what plug do I need, a simple stereo (ground, left, right) mini plug? Do I need a pre-amp? What software should I use?

I have several old cassette tapes that I'd like to digitize. Can I do that by playing the tapes on a portable cassette player plugged into the audio in port on the back of my 2012 Mac Mini? If I can, what plug do I need, a simple stereo (ground, left, right) mini plug? Do I need a pre-amp?
Yes, the audio input on your MacMini is stereo and line level. (It is not a Mic input.) You need a stereo miniature phono plug (3.5 mm) on the end that goes into the MacMini. You do not need a pre-amp.
As far as software goes, you can try 3rd party software, like: http://audacity.sourceforge.net
or
Just use Quicktime:

Bluetooth Headset Not Working in Bootcamp/Windows XP

I have a Plantronics Bluetooth headset that works fine in OSX, and is paired successfully in Windows XP. For some reason though, Skype doesn't recognize it, and it is not visible in the sound control panel. The latest Macintosh Drivers disk seems to have updated the Bluetooth driver, and I thought all of those issues were resolved. Anyone know what the problem could be here?
Thanks.
sundevil671

Late arrival. I posted re this topic about a year ago, to no avail. Then - 10.5.2 - the youtube, etc. files froze along with no audio via bluetooth, now (10.5.7) the video plays and only the audio stops!
This is not 'a Safari problem', it is a bluetooth/Mac/Flash problem that is ultimately only going to be sorted by Apple, I fear. And, I fear, it is not much of a priority for them while all their talent is still puzzling over the Java security problems...
You could try looking at this thread:
http://discussions.apple.com/thread.jspa?messageID=6384201
but nothing in it helped me, alas.
This:
http://support.apple.com/kb/HT2178?viewlocale=en_US
doesn't work with my headset (and probably works with none) either. Anybody know a hack that will allow changes to audio sampling rates offered in the Audio MIDI Setup app??
Or any other solution? A number of us would be very grateful!

Wifi not working with bootcamp windows 7 install

I have installed window 7 enterprise via bootcamp however I can't get my wifi configured. Windows does not see the built in wifi. So I cant get to the outside world nor configure a wifi printer in window. Everything still works perfectly in OS 10.6.6. Any advise on how get to get the wifi working in windows would be great.

It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
(added link to Sonnet's explanation)

Audio will not work after a Windows 7 upgrade.

Hello
I have recently Installed Windows 7 to my Lenovo 3000 N100 Type- 0768, 6XG. Everything works perfectly accept for the sound. I have tried to install different audio drivers to see if anything works. I have also been on other forums to see if this is a common problem. It seems that some people get their sound working and others don't.
Does anyone know what sound driver I should be using?
Could there be another problem which I don't see?
Is the best bet for me to restore my computer to factory settings!?
Please help me.
Thanks
Luke

have you tried to install drivers manually?
after you locate the .inf file for the driver that you want to install, manually install the new driver. to do this, follow these steps:
- click start, right-click computer, and then click properties.in the tasks pane, click device manager.
- if you are prompted for an administrator password or confirmation, type your password or click continue.
- in device manager, locate the device for which you want to install the driver.
note to display hidden devices, click show hidden devices on the view menu.
- right-click the device, and then click update driver software.
- click browse my computer for driver software, click let me pick from a list of device drivers on my computer, and then click have disk.
- in the install from disk dialog box, click browse, locate an .inf file for the device driver that you want to install, and then click open.
- follow the steps in the update driver software devicename dialog box to update the driver

Macbook pro w/ 24" cinema display does not work in bootcamp windows 7 - any solutions out there?

I am running bootcamp with windows 7 to be able to access some autodesk software. Once I'm in the windows environment I can no longer use my 24" cinema display. Is this a driver issue, video card, any ideas on how to make this function, I really need to display real estate.

I know this is an old post, but did you ever find a solution for this? I just installed Windows 7 through Boot Camp and bought an older 20" Cinema Display (M9177LL/A); the display works wonderfully on the Mac side, but I can't get it to register in Windows. This isn't the brightness issue that I see a lot of people have, I don't see a way to use the display at all.

Why does double clicking not work in photos on my Mac Mini?

Why can I not open a photo by double clicking my mouse in Photos App?

Has nothing to do with ios6, the last update to the Facebook app did it. Mine has been like that for weeks on ios5.0

Realtek Audio is not working in Windows 8 x64 and 8.1 x64

I bought MSI x79 gd 65 mainboard with 4930K i7 and GTx780 1 week ago.
I downloaded windows 8 and latest bios, chipset and audio drivers: Audio didnt worked. Then i updated 8.1 still not worked.
I tried to dowload windows 7 its worked but not with 8.
Then i downloded 8.1 again and i started to try oldest versions like 2.72 - 2.71 they couldnt help too.
I saw in one forum i was saying "make your realtek driver, windows 7 compatible" I tried and not worked.
I saw another forum "close your nvidia audio" Not worked :(
I saw another forum " Download oldest bios" Not worked
Nearly i tried everything. I dont want to use windows 7. What can i do to fix that latest Realtek audio driver not working. Realtek manager can see my 2+1 sound system when i put the cable also when i test it sound bar moving but no sound. Please help me. I hope i can find solution in there.

Update to the latest bios: https://forum-en.msi.com/index.php?topic=163918.msg1260356#msg1260356 (Follow the guide)
>>Clear CMOS<<
Afterwards update the Intel Management Engine Driver in Windows.
Reboot and afterwards install current Realtek drivers: http://www.msi.com/service/download/driver-22481.html

Flash player does not work properly on Windows 7 32 bits

Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your help

Hi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju'

Audio driver not working in hp 2000 - 2116tu laptop

Audio driver not working in hp 2000 - 2116tu laptop
Driver installed : sp57716.exe
From : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106718-1&cc=us&dlc=en&lc=en...
OS : Windows 7 Pro x64
Exact Problem : Audio stops working now, and then, intially reinstalling audio driver helped, but now, that trick is also not working!! I'm nither on mute, nor on low volume level!!
Laptop is brand new : And i'm using it from last 2 days only, so was installing everything for the first time.

Hi architsomani,
Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HD Audio is not working in bootcamp windows in mac mini 2012

Similar Messages

Maybe you are looking for