HD diagnostic/checking utilities?
Got my new HD installed but fsck.reiserfs found some problems which it fixed. System runs stable but I'd really like to make a total check to see if the drive really is ok. Any diagnostic/checking utilities for this?
My /boot is ext2, / and /home are reiserfs.
tlilja wrote:I've stumbled across the problem with RAM during my days as a PC support but that is not the case this time.
i cross my fingers, hope you go lucky with your harddrive. good luck!
Similar Messages
-
My ipad dosen't recognise the sim. I was told to do a diagnostic check. How?
The black screen with details of startup runs every time your Mac starts up. All you have done is made it visible. That information is written at EVERY startup into the log file, and can be examined there with Console.app.
There is NOTHING wrong with your Mac.
I find it soothing to see that information go by, but it is not the default. If you prefer not to see it, but just see the flower petal/gear instead, just reset the PRAM back to the factory defaults. [Command Option P R at startup, hold for three or four chimes.]
This will NOT change what happens at Startup -- the same sequence is executed regardless -- it only changes whether it will be shown on screen. -
System Health Checks Utilities
Hi Linux Gurus,
I need to understand some of the outputs of basic system health checks utilities - vmstat, netstat, iostat. As DBA point of view when I run any of the above utilities - what things I should look for. How can I know, the network traffic is high or network is not performing properly by using netstat. How can I know that the system I/O is high. Also I saw that there are many flags for these utilities which are very helpful to format or limit the output to a certain extent.
I will really appreciate the help on this topic.
Best Regards
-Samar-Hi Samar
A graphical tool like sourceforge.net/projects/xosview/ can make a part of the job, otherwise does oracle the OS Watcher (OSW) is a set of scripts that continually run in the background, collecting information about: Processes I/O Memory Network
OS Watcher user’s guide in MetaLink note 301137.1
Hope this helps.
Regards,
Hub -
After a diagnostic check for both connectivity and sync, we may have a conflict.
fellow iPod classic owners,
after a diagnostic check in which my iPod was found to be connected, on the sync test it was found to not be there. it appears that something is very amiss here. now granted i am not a whiz kid, but when one test tells you that you are connected and the next tells you that you're not, who do you believe? i smell a conflict of some kind or some such thing. clearly we have issues here. i don't know where else to turn. anyone have any ideas? both tests are part of the help tab on the iTunes page. it seemed reasonable to start here, but there is a conflict in the test results.
awaiting your comments,
hardphil.mancave4me,
the answer to the question is yes/and yes again. with one comes the other. i still have the problem even after uninstalling and reinstalling the apple apps. it's a thing which plagues pc users. it isn't an issue for my hp laptop however and that intrigues me. i'm no whiz kid with this stuff, but when you pass the connectivity test and it says your iPod is there. then, you fail the sync test because it tells you it is not there. somethings amiss at the circle k. i smell conflict. this is easily solved. just use my laptop for iTunes unless you have a working solution.
that's the way i see this. it's not the end of the world by a far stretch. let me know if you have a solution. thanks for your concern. sincerely, hardphil. -
My laptop will come on but will not start up. What could the problem be? I did a diagnostic check found no issues
Please post your full product Number
http://h10025.www1.hp.com/ewfrf/wc/findModel?cc=us&dlc=en&lc=en
#2
Please Do Not post your s/n -
Is there a ipad mini online hardware diagnostic check?
Is there a ipad mini online hardware diagnostic check? Or is there a really good app that will tell me if everything is working properly?
Of course not, why make something a buyer could fix himself when Apple can diagnose it and make repair charges so ridiculously expensive that they will offer you a 6% trade in discount on a brand new model? lol And make it sound like your stealin it from them at that price. Did I mention this happened to me? lol. The headphone jack works just fine. When the speakers show up I'll slap those in and have an awesome $162 ipad mini!
-
I have a iMac, Yosemite 10.10 and my toshiba external hard drive is not being recognized, except when I eject it!. I have the preferences checked to show icons and have looked in the utilities folder..nothing. I have also changed ports. ??
A few things to try:
1-Repair permissions and restart your computer.
2-Zap the PRAM
3-Use Software Update/App Store to update your OS to OS 10.10.3. Also, update everything SU/AS has to offer for your computer. When done, repair permissions and restart your computer. -
Guys,
I read in some of the Java books about a password utilities which checks if passwords are legal(according to the company's policy).
They used something like this:
public static boolean isPasswordValid (String pw)
String digits = "0123456789"
String letters ="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ"
//something with indexOf()
}and then checked if one of the chars exists in the String pw.
could anyone advise how to check it with indexOf????
I implemented it differently with this:
public static boolean isPasswordValid(String pw)
if (pw!=null && pw.length()>5)
char[] c = pw.toCharArray();
boolean digitExist = false;
boolean letterExist = false;
for (int x=0; x<pw.length(); x++)
if (Character.isDigit(c[x]))
digitExist = true;
if (Character.isLetter(c[x]))
letterExist = true;
if (digitExist && letterExist)
return true;
return false;
}I suggest:
Implementing what you want to do, by using the 'indexOf()' method, is also difficult.
But anyway...
char[] c = digits.toCharArray();
boolean digitExist = false;
for (int i = 0; i < c.length; i++)
if (pw.indexOf(c) != -1)
digitExist = true;
break;
//Same for the letters -
Please tell me what I need to do to fix this problem. It was working fine yesterday and now today that is not the case. Thank you.
I had the same issue! My 24" 2008 iMac was working perfectly. Yesterday I used my BootCamp partition and when I went back to my Mac OS I couldn't connect to the internet!
The computer looks like it's connected but it won't navigate at all! I tried to verify the network settings and when I tried to do that my System Preferences app hang-up. I had to Force quit it and reboot the computer couple of times to double check.
Then I run de Disk utility to verify the disk & permissions and the scan result was that the disk was not repairable, I had to make a timeMachine backup of my personal data and completely format my HD including the BOOTCAMP partition to reinstall MAC OS 10.6 and all the updates and everything and now Everything is working perfectly.
I first tried to only format my MAC OS partition and reinstall but there was another error that the insallation couldn't be completed. Then I completely erases all partitions and erased all the files and I was able to reinstall everything in a couple of hours. -
Nano (disconnected) is doing its own diagnostic check??
I turned on my ipod and it had a screen with a series of check lists it was going through which including testing all buttons and right now it is stuck on "read verify scan". I dont know how to turn it off or go back. Help?!?!
first gen nano Windows XPsee whether you can find an answer here
http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/ -
How do I run a system diagnostic check on my macbook?
I have a 2006 macbook pro with OS X Lion 10.7.5. I don't have AHT on my macbook and I don't have the backup disks. Any ideas?
you need grey disk 2 that origionally came with the mac to run AHT. No other alternative unless you bring it to an Apple store or AASP and have them run one. What seems to be the problem with your mac that makes you want to run AHT?
-
HP Pavilion dv8t-1100 Hard Drive Diagnostic failure - but runs fine?
I have a HP Pavilion dv8t-1100 CTO Entertainment Notebook PC (Windows 7 Professional 64-bit) that seems to run just fine. On a whim, I ran the pre-boot diagnostic check and received the following error code that the hard drive test had failed.
Q7NK1R-52M62E-XD002J-60WW03
Nothing in my PC's performance prompted me to run the diagnostic test, I simply ran it as a double check for the heck of it.
Is this something to be worried about? Of course an error code is always something to look into but since the PC seems to be running just fine is this a true error or simply a nuisance that should be ignored?
I can not remember making any signficant changes lately to the installed software and have made no changes to the hardware at all.
Any help would be greatly appreciated.
MJDHi,
I would resaet (not reset) the HDD or you may want to try this first:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443463&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_in...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
ORA-20998: Transaction Failed on Headstart Utilities 6.5 installation
Hello,
I am having problem when running insthsu.sql script to install
Headstart utilities 6.5. We are doing client/server approach. The
server is Sun 450 - Oracle 8.1.7.0.0
Designer 6i Release 4 repository was installed on the server.
How far was the installation:
1. Installed HST65 --> No problem found
2. Installed HDEMO65 --> No problem found
3. Failed on the following statement on insthsu.sql script:
... installing Quality Check utilities
execute hsu_qa_app.install;
error message:
hsu65@devl> execute hsu_qa_app.install
BEGIN hsu_qa_app.install; END;
ERROR at line 1:
ORA-20998: Transaction Failed
ORA-06512: at "HST65.QMS$ERRORS", line 128
ORA-06512: at "HST65.QMS_TRANSACTION_MGT", line 814
ORA-06512: at "HSU65.CG$AIS_HSU_UTILITIES", line 39
ORA-04088: error during execution of
trigger 'HSU65.CG$AIS_HSU_UTILITIES'
ORA-06512: at "HSU65.HSU_INSTALL", line 132
ORA-06512: at "HSU65.HSU_QA_APP", line 40
ORA-06512: at line 1
Any idea or direction where should I go from here?
Thanks,
Sanny SubowoAli,
You are running into a bug in the install form. It sees the tables that you imported manually (like the message told you to do), and then complains about them. The best thing to do is change the code in the hsdinst.fmb where the check for existing objects is performed in program units CHECK_USERS:
function hsu_objects_exist
return boolean
is
cursor c_chk
is
select 'x'
from user_objects
where object_name like 'BL_%'
-- or object_name like 'HSU_%'
-- or object_name like 'OMR_%'
So comment out the two lines as indicated above and recreate the fmx.
Kind regards,
Peter -
Dignastic check and then it comes up. Why is it doing this
When I bring up Safari, It wants to not come up until I do a dinastic check and the only thing that is not green is the internet and the server. In doing the check it will check out ok. Safari come up after i do the check. What is causing this?
How do you get your internet service? DSL? Cable? DialUp?
How is your iMac connected to the internet?
- Do you connect your iMac directly to the internet service provider's modem?
- Are you connected to wirelessly or via an ethernet cable?
Rather than going through the diagnostic check, what happens if you instead wait 30-60 seconds. Does the issue resolve itself?
The following articles may also provide some help. If you are using PPPoE then the following information from the article referenced below may help. It's referring to an option in the advanced section of the Network System Preferences pane. I've included a screenshot from my system below. I am also running 10.7.3, just like you.
"Tip: To have the computer automatically connect whenever you open a network application (Web browser, email, and so forth), click PPPoE Options and select the "Connect automatically when needed" checkbox."
http://support.apple.com/kb/HT2301
Hopefully a simple preference change like this will help. -
My computer diagnostic said my plugin container has quit working
certain sections of my emails would not open and my zinga toolbar disappeared i ran a copmuter diagnostic check and it said my mozilla firefox plugin container had stopped working how do i remedy this situation
See this - http://kb.mozillazine.org/Problems_printing_web_pages
Maybe you are looking for
-
Invooice block for price variance
Hi I require a block for the invoice for value more than PO value by 2Rupees. I have done the Tolerance key cuustomizing for PP (Price variance) by mainaining the upper limit as 2 Rupees and have checked the limits. I expected the system to block the
-
How do i set Preset "High Resolution" in save as EPS script
Hi, I am writing my own Illustrator scripts to automate the workflow. I haven't been able to fix a Preset "High Resolution" in the transparency section of the EPS-option dialog. Is there a way to set that option by script? It would be great if anyone
-
Oracle Business Intlligence Dashboards
Hi, In my Oracle Business Intelligence Answers Dashboards, I get this issue: Error View Display Error Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_
-
For a report region, is the query results cached? That is, is the report query being executed again in the following condition: * when a user navigate between pages of a report (from page 1 (1-100 of 1000 rows) to page 2 (101-200 of 1000 rows) * when
-
hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.