HD does not mount on Desktop

I have a friend who have an external USB HD which works well under XP on his PC.
When I connect the HD on my Pb G4 17" 1.67Ghz it does not appear on my desktop (OSX 10.4.10). I even don't see this HD under Disk utility.
Why?
Ben

I mean, does your external hookup via FireWire or USB?
Well assuming the drive in the enclosure is physically OK, perhaps your FireWire bus is not working (most Mac users have FW as they are bootable);
Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that didn't work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
If that still didn't get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good! Also, here is Apple doc.#88338 on getting FireWire to work.Here's another Fw Faq.
DALE

Similar Messages

External hard drive asks for password and does not mount on desktop

Hello all,
I bought a portable FireWire external hard drive to connect to my iMac G4. When connecting via FireWire, a message window appears telling me that the external disk is password protected and prompts me to type a password. Neither typing my administrator password nor activating the checkbox "Temporarily remove protection" and clicking the Unlock button is successfull: the hard drive does not appear on the desktop but it is listed in the System Profiler under Fire Wire Bus. I tried the external drive on an iMac G5 where it works without any problem. So what shall I do? Does anybody know an issue to this? I will be glad for every answer.

Have you written any data to the external drive? If not, perhaps you could add some data.
Are you using filevault?
You could reformat it in disk utilities.
Here is the path...
Macintosh-HD -> Applications -> Utilities -> Disk Utility
It may be a problem with accessing the drive from different users, I could not recreate the problem with different users on my machine. I have only one machine with firewire.
Robert
Message was edited by: rccharles

Blank SD card does not mount on desktop

I bought a Sandisk 1.0 GB card and put it in my Sandisk reader ( which takes just about everything). I want to move some pictures from iPhoto onto the card to use with one of those picture frame slide show I just got. The card does not show up on the desktop. I am lost!

Hi again,
If it's a new card, it's probably good. Smtr is right, format the card in a camera, that might do the trick.
Rick
iMac G5 iSight 20" - 30G iPOD & Hot Pink Nano 4G - WD 500G FW - Mac OS X (10.4.8) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620 Kodak P880
Message was edited by: JMEH
You can also try the card out by taking a few pictures and try the downloading the images to your Mac...

IPod recently does not mount to desktop, intermitten problem

My iPod dos not want to mount to desktop on my G5. This is something of an intermittent problem. I plug into firewire port, iPod comesalive, shows main screen. Nothing happens. After a while iPod goes to sleep and shows chargin icon.
This is pretty intermittent, but seems to be getting worse as time goes on. I began to think there was something physically wrong with the cabel, port etc. until I realized it had to be getting a signal to be charging.
Any good ideas?

Interestingly enough, it mounted fine when using a USB cable. Now I wonder if the problem is in the firewire cable of the firewire port.

External Drive does not mount on desktop

Hi,
I did a Leopard upgrade and most everything went smoothly. But when I boot, Leopard pops up a window telling me that a disk I inserted is unreadable (it took me a time or two to realize it WAS referring to my USB 2.0 external hard drive).
It gives me the option to ignore, initialize or eject. Thus my hard drive won't mount on my desktop. It DOES show up in Disk Utility, however, so maybe there is hope.
So what are my options? Am I looking at burning DVDs all day so I can re-initialize or reformat this drive for Leopard?
I appreciate any help, and I did a lot of searching on this topic, so I'm aware that there may not be any solutions as of yet.
Many Thanks, Frank B.

Hi Andre, I can't remember except to say that it was mounting fine with tiger and I was able to copy files to it for backup purposes.
I just hooked it up to a PC and windows tells me the drive is not formatted. That's not a good sign, and this was stupid: I think I had the drive hooked up to my Mac Pro during the upgrade.
Idiotic, granted. But this was an upgrade, not a full install and I maybe was trusting in Apple's ability not to do extraneous stuff during an install like windows does. Oh well...
I appreciate any further ideas. Many Thanks, Frank.

External Firewire drive does not mount on desktop now.

Greetings everyone.
G5 dual, 4.6GB ram, OSX 10.4.10, external firewire drive, formerly worked fine, now is invisible.
Not the drive. New purchase, worked fine until a restart. Not the cable. Power is getting from the G5 to the firewire drive. Not the port. I also have a firewire card instlaled so I have three ports to connect it to (and two on the FW drive). No combination works. Not the computer, the FW drive also fails to appear on an iBook. Not the OS. I did a clean install to make sure.
I'm not a newbie. I know what I'm doing. Until now! DiskWarrior, TechTool Pro, Drive Genius and Apple's Disk Utility cannot see the drive.
The FW drive is a Powerbook internal HD inserted into a case, purchased seperately.
At my wits' end. Can anyone help please.

I am suddenly having this EXACT problem. I have two Firelite firewire drives (one 60G and one 80G) that are suddenly refusing to mount on my older dual 1.25GHz G4 tower. They are also suddenly refusing to mount on my non-intel iMac. They will both mount painlessly on my new Intel MacBook Pro, but that's not much use, since the point of the firewire drives is to transfer files between these computers. I'm updating all of them to 10.4.10 to see if that's the issue...

Vivitar "Vivicam 2755" digital camera does not mount to desktop

My mother recently acquired a digital camera. She acquired it from a second-hand store, which did not include an interface cable or software. The manual (and the USB port on the camera) indicates that a male-male USB cable is necessary for photos to be copied to the hard drive.
I was not successful in locating such a cable at any local electronics store (I assume such a cable is now out-of-date). I purchased one from a seller on eBay. The brand is "e circuit electronics".
Upon powering up the camera with the cable connected to it and the computer, the following message appeared:
"Software needed for the USB device "USB Interface Controller TEST2.0" is not available. Would you like to look for the software on the Internet?"
I clicked "Yes". After an approximate two-minute wait, another message appeared stating:
"Software Update is not able to connect to the Internet. Please check your configuration and try again."
I queried this discussions forum for assistance in locating software for this camera, or to correct "Software Update"'s issue with connecting to the Internet, but was unsuccessful. The discussion can be located here:
[http://discussions.apple.com/thread.jspa?threadID=1280502&tstart=0]
Yesterday, by pure luck while continuing my search via Google, one of the results was a German web site. Through Google translation, I was able to find software that alleviated the message that appeared after connecting the camera with the computer. That piece of software is the Vivicam V2655 (most likely a slightly older version than what I need), located here:
[http://64.233.179.104/translatec?hl=en&u=http://www.treiberupdate.de/treiber-download/z-dltreiber/download_trei ber_9991007.php%3Fload%3D157665%26extern%3D1%26vendor%3DVivatar%26sys%3DMAC&prev=/searc h%3Fq%3DV2755%2BMac%26hl%3Den%26sa%3DG]
Upon restart, I expected a new icon to appear on the desktop as well, but that did not occur.
Is there an application that will reveal such an icon (with the action of a folder) that will allow me to copy the photos in the folder, from the camera to the hard drive? I assumed Drive Setup would be able to do so, but I was wrong.

Your easiest & cheapest way to transfer the camera pictures is to buy (about $10 - $20) a USB memory card reader. Just plug your camera's memory card into it & copy the pic files to your Mac. Quicker & easier than interfacing the camera for pic transfer. Note - After you transfer the pics, be sure to drag the memory card icon to the trash before you remove the card from the reader.
 Cheers, Tom

CD does not mount on desktop and is not recognised by OSIRIX since moved over to Mavericks

Dicomm CD not recognised in Mavericks on desktop or by Osirix

System Preferences > CDs & DVDs > When you insert a blank CD > choose one
Same for DVD, assuming this is all the same for Leopard as for Tiger and you're talking about blank discs.

10.5.5 update Startup disc not mount to desktop

Since updating to 10.5.5 my startup disc (Main) does not mount on desktop or appear in finder.
Disc utility says all is normal. In fact the volume appears in sysprefs as startup volume.
I tried deleting com.apple.finder plist to no avail.
Automatic login is disabled.
Any other suggestions?
What about DiskWarrior or other utilities?
TIA, John

check finder preferences general and sidebar. make sure that hard drives are set to show up in the sidebar and on the desktop. if that doesn't help, it might be the invisibility bug. check out this link
http://docs.info.apple.com/article.html?artnum=307503

My iPod does not mount to the desktop!

Under my system profile, my computer recognizes that my iPod is present, yet it does not mount to my desktop or iTunes. What could be wrong?

Good, I'm not sure if this will work, but it's worth a try.
Here's a way to do it without Terminal.
In finder, go to the "Go" menu and choose "Go to Folder". In the box that opens, type "/Volumes". When that opens, you are looking at the devices mounted to the operating system. If no iPod is there, then even though the system sees the device, for some reason it can't mount it at all.
If you have permissions problems, then you might have to enable the root account. If that's the case I can give you directions on how to do that, but I don't think you'll need it as long as you are an Administrator of the computer.
If that folder opens, and you don't see your iPod, let me know. Even though I have seen this happen a bunch of times, I'm having trouble recreating it at the moment, so I can't test to see if I can manually mount it. I'd like to try to give you directions to do so.
Otherwise, if you see an entry for you iPod, try clicking on it and see if you get in.
Jeremy

Why my Ipod touch does not mount on the desktop?

Why is it that my Ipod touch 4th generation does not mount on the destop whiel it is showing in Itune?
if you have a solution i would appreciate.
Thank you

Buster22 wrote:
The other ipods nano mount on the destop and they are not external drives also i checked the view options in finders and made sur the options ar set to mount the ipods
The ipod touch and iphone and ipad do not.

Ipod (3rd gen.) does not mount to iTunes

My ipod (3rd gen.) does not mount on iTunes (using a Mac). When plugged in, it appears on my desktop as if it were a jump drive.
I was planning on re-formatting it with Disk Utility but I'm not sure if this is a good idea. I also realised that the Format is listed as Windows NT File System (NTFS) when I have the disk utility window open. If I need to format with Disk Utility, what format option should i choose? (i.e. Mac OS Exteneded (Journaled), Mac OS Extended etc.)
Thanks in advance!!!

Now when I connect the Ipod to my Mac, it mounts as a Device on iTunes. I want to sync only a few items from my library onto this iPod - when I attempt to do this (by either adding the specific music to the "music" section on the iPod or creating a playlist and using Autofill to fill the iPod), the iPod says that it has Synced but when I disconnect the iPod, there is no music on it. Why?

Ipod does not mount onto Mac OSX

My click wheel Ipod does not mount to my desktop nor to my Itunes. I tried resetting it but I cannot restore it because it does not mount. I also cannot open up the Ipod Update software file, it tries to open with Appleworks, then stops.

I have fixed my iPod blank/black screen problem (i suspect black screen for iPod5G black model, and white screen for the white model) On Black Friday, which was yesterday, after I upgraded the newest releases on QT/iTunes602/osx1044/iPod11, iPod didnt do anything, no mounting to my iBook/iMac/G5PwrMac. Hard reset didnt work, etc.
I decided to fix the iMac permission with local drive DiskUtility, then reboot the iMac with the Original Tiger iMac DVD software restor disc which comes with the desktop then repair the volume with this method. Then I reboot and then I did an extended hardware test with the same disc, but with the Hardware test disk (which is the same as software restore DVD, iinstead of holding down the c key, hold down the option key when reboot with the disc)
After all that, iMac restarted and recognize my 5G iPod 60GB, I quickly restore the whole iPod to manufacture setting, hopefully you have all the info backed up somewhere, I did a clean defractmentation, and then used the iPodUpdater from 11-17-2005 to restore the iPod 1.0 version.
Now I am done and my iPod works like new. Go try it guys... Good luck!

Firewire icon does not appear on desktop

My Firewire is connected and turned on but it's icon does not appear on desktop. I ran disk utility and the drive's icon appears there. I can run repair tests on it but not a permissions test. When I checked "Get Info" I noticed a line that reads "OWNER ENABLED: NO". What Can I do--I have a lot of important files on the drive and need to access them. I have also run 3rd party disk utilities that say the firewire drive and all files are 'ok' but still I am not able to access it in any way.

If disk utility sees the drive then you should be able to choose it from the list and click "Activate" (or "Mount" or whatever it says in English )
PB G4 Mac OS X (10.4.7)

Iomega prestige does not mount with osx 10.7

Iomega prestige does not mount with osx 10.7. I can see the drive under 'about this mac' under storage USB but it does not mount on the desktop or in disk untilities. It does run, the light is on, and I can feel the disk spinning. I have tried PRAM and NVRAM with no luck. Any ideas?

Is the disk designed for 10.7.5, or maybe an older OSX? At this point we are both trouble shooting in the dark. Maybe you might want to return the the drive and get something that you know was built for your machine. This does not make sense to me. Maybe one of the mega dot guys on this site can chime in and offer some info. Sorry I could not offer any more info.

HD does not mount on Desktop

Similar Messages

Maybe you are looking for