HD DVD movies

Has anyone out there burned a DVD in H.264 and tryed it on the Samsung Blu ray or Toshiba HD-DVD player?
I am interested in anyones findings as there seems to be conflicting news on this.

The initial Toshiba HD DVDs players played red dye DVDs created in DVD SP under these conditions:
1. aiff audio
2. mpeg2 (not h.264) encoding
3. no menus, just tracks.
Given that DVD SP only encodes to HD DVDs, the Samsung BluRay players did not see a disc.
Toshibas upgrade to v.2 firmware apparently do not play the HD DVDs encoded as above any more

Similar Messages

  • IDVD 08 audio/video sync drift toward end of DVD movie - fix/workaround?

    Anyone know how I can fix this issue? It's driving me crazy.
    I've just spent a few evenings in iMovie 08, editing together the video of my son's birth. All looked & amazingly good in iMovie. The "Large" .m4v file output by iMovie - Shared with the Media Browser - plays perfectly in Quicktime too.
    However, after adding that shared movie to iDVD 08, and burning a DVD, I noticed that the audio sync drifts toward the end of the Movie when plated back. At the start of the DVD all seems well, but by the end of the ~1hr 20 minute movie the audio is unbearably out of sync with the video. Completely unwatchable.
    After a little Googling I came across some reports that iDVD might not deal well with video that's been recorded with 12-bit audio. I've confirmed that my camcorder is (was!) set to 12-bit rather than 16-bit (the default, I'm sure). So if that's the problem I'm hosed... it's not like I can get a retake on that footage
    Is there a reasonable workaround for this issue? I'm obviously unable to re-take the video (or the other 10 hours of DV video tape I've yet to use in an iMovie project). Ideally I'd like Apple to release a patch for this. Shouldn't it be possible for iDVD to account for audio that was originally recorded in 12-bit... even if it's just a checkbox you have to select to tip it off?
    Then again, perhaps this is totally unrelated to the 12-bit issue, and this is just a run of the mill bug?
    As I said... iMovie generates a MPEG4 video file of the Movie that looks/sounds perfect, so it seems this sync issue's being created somewhere in iDVD as it's rendering the audio/video to burn to the DVD...
    Thanks in advance.

    I've tried most of the options I can think of, and the audio sync drift issue continues on this ~1hr 12 minute iMovie/iDVD 08 project.
    A couple of promising ideas tried used QT Pro, to export the audio track from the iMovie generated MPEG-4 file - as a WAV file, resampling to 48kHz and 16-bit... then Adding this back to the video track in the MPEG-4 file (having deleted the original audio track). In another test I also tried the Add to Selection and Scale option. Oddly enough I think the Add to Selection and Scale attempt generated more sync issues than before in the final DVD movie... so I stuck with the MPEG-4 file containing the video track and the added, resampled at 48kHz & 16 bit, WAV audio track.
    This was saved as a self contained Movie file, producing a QT .mov file. I moved this .mov file into the iDVD projects directory structure so that it was avalable in iDVD's Media Browser. I then reworked the iDVD project to use this QT large.mov file, instead of the original iMovie large.m4v file.
    As a reminder... the original large.m4v file has the following properties:
    29.97 FPS H.264 Decoder, 960 x 540, Millions
    AAC, Stereo (L R), 44.100 kHz
    0:01:12:07.16 duration
    The resampled and saved QT MOV file has the following properties:
    29.97 FPS H.264 Decoder, 960 x 540, Millions
    16-bit Integer (Little Endian), Stereo, 48.000 kHz
    0:01:12:07.16 duration
    BOTH versions of this Movie file play flawlessly within QT Pro... there's no audio sync drift evident toward the end of the movie unless I use iDVD 08 to burn either movie file to a Physical DVD (or DVD Disk Image). In both cases the resultant DVD Movie exhibits significant audio sync drift as the ~1hr 12 minute movie progresses. The sync goes out by ~ <= 1 second based on a rough visual assessment.
    I've not yet tried to burn either the original iMovie produced MPEG-4 video file or my QT Pro tweaked audio track .MOV file version to a DVD on my PC...
    ... But I have used an application called Burn (referenced in this earlier/archived iDVD sync drift forum post: http://discussions.apple.com/thread.jspa?threadID=1332100 by user F Shippey - http://burn-osx.sourceforge.net/) to take the QT Pro tweaked .mov file version of the original MPEG-4 file and burn it to a DVD...
    Results:
    The Burn app burnt DVD plays with NO audio sync issues!... Even though it was generated from the same audio tweaked (48kHz/16-bit resampled) QT Pro .mov file.
    However, whenever I burn a DVD using iDVD 08 the audio sync gradually drifts. It matters not whether I use the original iMovie 08 generated MPEG-4 movie file, or the QT Pro version of that file with the resampled audio track (the same one that works fine with Burn).
    It sure looks to me like iDVD has a problem... Again, refer to http://discussions.apple.com/thread.jspa?threadID=1332100 for someone else who seems to have run into similar challenges.
    Am I overlooking something?
    Thanks in advance.

  • How do I copy a dvd movie to my iphone

    How do I download a DVD movie I own to my iphone?

    You own the DVD but if a commercial DVD with copyprotection on the DVD, legally you cannot make a copy (Rip) it. Thus cannot really help you here. <edited my moderator>

  • DVDPlayer not recognizing DVD. I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and will not recognize/play a dvd movie...it thinks it is a blank dvd.  The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4).

    IMAC DVD Player does not recognizing dvd movie . I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and it will not recognize/play a dvd movie...it thinks it is a blank dvd. The IMAC will play rented dvd movies.   The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4) abd in my external Sony DVD Player  The dvd move was made/burned on a PC.   Why will a dvd movie play on my Macbook Pro and not my IMAC?

    Hello:
    This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
    When the DVD is in the drive (and DVD players is open) click on File>get disk info.
    Barry

  • How do I turn off computer monitor when watching DVD movie on TV monitor?

    I think this is really a Leopard question because it involves setting up 2 monitors in System Preferences within OSX. 1) I have a wide screen TV connected to my iMac (Intel White Late 2006) through the Mini-DVI port and a separate audio cable. This connection works fine. 2) The purpose of the TV screen is only to watch DVDs using the DVD player and iDVD in my iMac. 3) In System Preferences->Displays->Arrangement, both my computer monitor and the TV screen appear as separate monitors. I have the setting to mirror each other. With this setting, the DVD movie plays on both the iMac computer screen and on the TV screen. 4) FINALLY, MY QUESTION: When watching a DVD on the TV screen, I would like to turn off the monitor in my iMac so that the screen is dark (in sleep mode to save power, etc.); I want only the TV screen to display the movie. How do I turn off only the iMac screen? Thank you. Dale

    Dale H. Eckerman Jr wrote:
    I think this is really a Leopard question because it involves setting up 2 monitors in System Preferences within OSX. 1) I have a wide screen TV connected to my iMac (Intel White Late 2006) through the Mini-DVI port and a separate audio cable. This connection works fine. 2) The purpose of the TV screen is only to watch DVDs using the DVD player and iDVD in my iMac. 3) In System Preferences->Displays->Arrangement, both my computer monitor and the TV screen appear as separate monitors. I have the setting to mirror each other. With this setting, the DVD movie plays on both the iMac computer screen and on the TV screen. 4) FINALLY, MY QUESTION: When watching a DVD on the TV screen, I would like to turn off the monitor in my iMac so that the screen is dark (in sleep mode to save power, etc.); I want only the TV screen to display the movie. How do I turn off only the iMac screen?
    That's impossible. It can only be done on a laptop but not on an iMac.

  • Wireless stream of DVD movie from Macbook to TV (via Apple Tv)

    Just bought the Apple TV and I am trying to find a way to do a wireless stream of a DVD movie playing on my MacBook onto my TV via Apple TV. Is that possible?

    I have the iPhone 4 and also an iPad ... I'm still not sure how to get from loading/playing my DVD Movie on the MacBook to transferring it to my TV using either of these iOS devices ... I'd love to learn

  • How do I use airplay to stream a DVD movie playing in my computer to display on my TV?

    How do I use airplay to stream a DVD movie playing in my computer to display on my TV?
    I have a 2nd generation Apple TV and computer is a 2011 Macbook Pro. Processor  2.8 GHz Intel Core i7. Memory  4 GB 1333 MHz DDR3. Graphics  Intel HD Graphics 3000 384 MB. Software  Mac OS X Lion 10.7.5 (11G63). Storage: about 500GB free out of 750GB.
    I have a DVD player within my computer. Trying to play a movie from my computer to display onto my TV using my Apple TV airplay. But the airplay icon is not showing or giving the option to play a movie onto my TV.
    I've installed all software updates and still I'm not able to have this functionality.
    I assume this functionality exists where I can play a DVD on my computer, but watch it on my TV using my Apple TV, correct?
    Thanks for your help solving this puzzle.

    Welcome to the Apple Community.
    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.
    AirPlay Mirroring from a Mac also requires a fairly robust network.
    You may find a third party product that you can use instead of AirPlay.

  • Is there a way I can download my DVD movie to my laptop DVD-RW and then be able to play it on my TV

    Is there a way I can download my DVD movie to my laptop DVD-RW drive and then be able to play the disk thru my DVD player
    on my TV

    Please see the personal message I sent you.

  • I have just transfered 2 dvd movies i purchases with digital copies to my itunes account and now i am trying to put them om my ipad it keeps telling me that these movies are not supported on my ipad.  what can i do?

    I have just transfered 2 dvd movies i purchases with digital copies to my itunes account and now i am trying to put them om my ipad it keeps telling me that these movies are not supported on my ipad.  what can i do?

    Highlight the movie, go to iTunes menu ADVANCED and select create iPad and AppleTV version.

  • Cannot download full DVD Movie Factory version for Satellite A100 and clean Vista

    Hi there
    I made a clean Windows Vista orgianal upgrade set from Modus link.
    Installed and now when a want to install the DVD Movie Factory patch (DMF5.51_Patch_18in1_for TOSHIBA_147.05_0718)
    there is no dvd creator software installed and also no cd creator...
    it saids "no earlyer DMF found" and is stop and exit intalling this patch.
    Now i cann't get the dvd creator software on my Satelite A-100 ..
    In my earlyer OS XP MCE had a.. DVD creator DMF from Ulead for toshiba (oem) and sonic cd creator
    What can i try now?
    Reagds Okky

    The fact is that both applications are part of recovery image and these applications are available if you have factory settings only. They cannot be downloaded and installed additionally.
    If you want to habe them again you must install OS again using Toshiba recovery DVD.

  • Can you put purchased DVD movies onto your ipod?  also what about DVD moies that you have that are recorded, not bought?  and if you can how do you do it?

    Can you put purchased DVD movies that you have on your ipod?  what about recorded DVD's that you have?  and if you can, how?     ex)  i bought the DVD Tangeled for my daughter and wanted to put it on the ipod..  also she has a disney DVD movie Brother Bear, which was not bought at a store but it is recorded onto a DVD. can we put that on ipod?
    and if so.....  how????
    Thanks in advance for your help.
    NaeNae'

    "Can you put purchased DVD movies that you have on your ipod? "
    No.  breaking the encryption in order to copy them illegal.
    " what about recorded DVD's that you have? "
    Add them to itunes.
    http://support.apple.com/kb/HT1473

  • Zen Vision M 30gB: How Do You Add DVD Movi

    Just received this player as a gift from a friend. I think he got it at DELL. It was easy adding Music and it sounds great. I have to figure out how to use the Equilizer, Smart Sound (keeps sound levels constant) and Bass Boost...to arri've at the best sound quality. Takes some fiddiling as each changes quality. Through much trial and error i figured out how to add some video clips i had stored on my computer. They had to be converted even though they were in the acceptable AVI. format. Convertion TAKES A VERY LONG TIME to WMA but at least it worked. I then figured out how to download a "Simpsons" episode from Kazaa and convert it,? and load it to the player. Conversion of the 30 minute episode took some 2 hours. I did all this on Zen Vision Media Explorer software that came with the unit. BUT:I HAVE NO WAY OF ADDING DVD MOVIES! I tried using the Media Explorer? - Convert Video - Add: i select Dri've E: / DVD - Spiderman II ...but i get folders with lots of weird files and it doesnt work. Isnt the point of a Video player to have a drag and drop DVD movie feature?HELP.

    I'm afraid we cannot allow discussion of ripping commercial DVD on the forum, for legal reasons. I'm sure you will be able to find more information by using search engines or from some other websites.
    Jason

  • DVD movies to iPod video format

    I often travell on official business, I am trying to rip a DVD to my ipod. My friend told me that Sothink ipod- converter can convert DVD movies to IPod video format. I have downloaded and try it,I think the Sothink IPod Video Converter is designed to be an easy company for my IPod.
    IBM   Windows XP   no

    If you want a really organized package for ripping your dvds into .mp4 "ipod" format use the dvd Decrypter and Videora ipod conveter. They are very organized and they put you in control of the video/audio settings... And it couldn't be easier. Here are the links if you wanna give these FREE programs a shot
    Videora ipod converter - http://www.videora.com/en-us/Converter/iPod/
    Dvd Decrypter - http://www.mrbass.org/dvdrip/
    ps... You need both because after ripping your dvd it becomes a .vob file..Ipod cannot read this so you must use videora to make it an .mp4 "ipod friendly" format.. Reply if problems occur please!!! Thanks...

  • HT5287 If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?

    If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?
    Or am I missing the bigger picture?

    As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.

  • DVD Drive will not recognize any movie DVD disk in the drive - thus will not play any dvd movies.

    HP G71 449WV dvd drive will not recognize any dvd disc that has a movie on it. Will not play movies, keeps saying to insert disc when there is a disc in there.  It will recognize a dvd data disc or a blank dvd, it just will not recognize any dvd movies.  I've tried the microsoft fix it, downloaded new codecs, using different dvd playback software but none of that works since the drive will not recognize there is even a dvd movie in the drive.  Computer is out of warranty.

    Hello crollinsphoto1, welcome to the HP Forums.
    It appears that you're not able to play movie DVD's in the DVD player in your notebook. I will try to assist you with this.
    I'd recommend starting with this document:
        Resolving DVD and Blu-ray Movie Problems (Windows 7).
    Also, are these purchased DVD's or burnt DVD's?  
    Do the movies play in other sources? (DVD player, other PC)
    Let me know how this goes.
    Thanks.
    I worked on behalf of HP.

  • Is there a way to import commercially purchased DVD Movie to my iPod?

    Is there a way to import commercially purchased DVD Movie to my iPod?
    I tried the "Import" function and that didn't work. Is there a function to convert and import or is there a program that might accomplish this?
    Thanks in advance.
    Chuck Manetta

    I would argue that transferring the movie to another medium for *your own personal use* is covered under "fair use", but of course I am not a lawyer. The law that you may be breaking would be the Digital Millennium Copyright Act (DMCA). Read up:
    http://w2.eff.org/IP/DRM/fairuse_anddrm.html
    In any case, we still can't tell you how to do it on these forums.

Maybe you are looking for

  • ITunes crashes when I play certain songs

    After having upgraded to the latest firmware (OS 4.3.1) iTunes crashes when I try to play and sync some of my songs in my album that previously played and synced fine. The songs are encoded as .m4a at 256kbit, 44.1 kHz and are playing fine in for exa

  • BI EE Presentation Services Connections error

    After I try to create a BISoapConnection in EM,and when saving this connection,i got errors says "javax.management.RuntimeMBeanException: javax.management.RuntimeMBeanException: These mbeans encountered exceptions and may not have been saved biserver

  • MRP Areas error message

    Hi In implementing MRP areas, we created and assigned MRP area to material and later on deleted the config for the MRP area definition without deleting it from material master. We get an error message MD318 - MRP area has not been defined, which is a

  • When receiving an email with a picture, I can not see the picture.

    I use to receive Email pictures but now the pictures do not open but there is an icon where the picture is suppose to be. clicking on the picture does not open it.

  • How to map many finished product in one bom

    Sir, i hav one raw material sheet in which i will cut number of finished products.how i map in bom.all finished product has cut in differnt quantity.