HD DVD Player for a Power Mac G5

Okay.
I got this beautiful 30 inch HD Cinema Display.
A Power Mac Dual 2.5Ghz PP G5.
and i cant play HD DVD's in my dvd drive.
Anyone know of an upgraded DVD Drive.
A HD DVD Drive for a Computer.
Do they make it yet?
There producing HD DVD so why isnt there a computer dvd drive that handles it.

You won't be able to play HD-DVD or BD-DVD's in your computer or with your monitor.
Right now the whole "High def" on computers is up in the air and will require a DRM solution from the computer ot the monitor. Enjoy your powerful machine and wait out the next few years until everything settles down.
When it does you can sell what you have and buy the new hottness.

Similar Messages

  • DVD drive for G4 power Mac

    I replace the old CD drive with a Pioneer DVR-S18LBK, got a new pci SATA card for it, and it worked fine. I could open and close the tray from the key board, I burnt one iDVD and now it has stopped working.
    It has power to it and the tray can only open and close if I dismantle it and press the button on the DVD drive. CDs or DVDs do not appear on the desktop when inserted. When I unplug the SATA cable it brings up an window that says something has been removed, when I plug it back in it recognises it as the Pioneer DVR-S18LBK.
    The old CD drive works, I am stuck with what to do, any ideas?

    Welcome to Apple Discussions!
    I'm assuming this DVD drive is for the QuickSilver 733 Mhz in your profile. Am I correct?
    A lot of third party DVD drives will only work with Macs if http://www.patchburn.de/ is installed. Some may require a firmware update applied from a PC. Check http://www.xlr8yourmac.com/ to see if your drive has been tried on Macs before running your operating system.

  • How do i watch my purchased dvds on apple tv if i usually use an apple dvd player for playback on my mac?

    How do i watch my purchased dvds on apple tv if i usually use an apple dvd player for playback on my mac?

    Nothing technical has been discussed. It is blocked because of licensing/copy protection.
    I have to buy another DVD player?
    The Apple TV is not a DVD player. So if you do not already own a player, then yes you will have to purchase one to view them on your TV.

  • Do I need to buy a particular 10.5 Leopard DVD for my Power Mac G5

    I have been having problems with my Power Mac G5, which can only be resolved by reinstalling leopard, and since I don't have the DVD, I have been looking for a 10.5 Leopard DVD for my Power Mac G5. However I have noticed that some discs say they only work for a particular kind of mac ( which is true, since I attempted installing leopard with a macbook pro dvd, which did not turn out well ). Do I have to look for a 10.5 Leopard DVD that is particularly for a Power Mac G5? If so, where can I find one?

    Yes, Gray Install Discs, the ones that come with Macs are Machine specific.
    You need the Retail version.
    Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5

  • I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my wireless network. Is there a limit on the number of devices I can connect to my AirPort? I never have a problem connecting an Apple device (AirBook, iPad, etc).

    I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my AirPort Express network. Is there a limit on the number of devices I can connect to the wireless network? I never have a problem connecting a new Apple product (AirBook, iPad) and even a basic laptop. Thanks for your help.

    The AirPort Express Base Station (AX) can support up to ten (10) simultaneously connected Wi-Fi clients.

  • Anyone provide accurate info on why after 1 yr, after guarantee period expiry the DVD player on our I mac running Intel core duo processor with OS 10.6.8 refuses to run DVDs? CDs run

    Can anyone provide accurate info on why after 1 yr, ( just after guarantee period expiry) the DVD player on our I mac running Intel core duo processor with OS 10.6.8 refuses to run DVDs?
    CDs run without problem and until recently the DVD we have (all original no pirated copies) ran; we have used a CD cleaner disc to no avail.

    Welcome to the Apple boards:
    I suggest an erase and install and use your backup for any important files you have.
    Did you perform a disk check/repair and permissions repair and a PRAM zap before updating? While not required, they are usually necessary to avoid issues.
    There are so many reasons for a bad install, that it is impossible to list them all.
    Out-of-date software, drivers, etc, haxies, and other software can cause problems.
    My three updates were without incident, so it is possible for a perfect update, but unless you supply us with details about your previous system, programs, apps, drivers, etc., it is not possible to figure out what happened.
    Again, whenever installing an update to an OS, a clone or other full backup is absolutely necessary, as reading the posts on this board indicate.

  • Using hacked Flash Player in unsupported Power Macs === 

    Understandably, the current versions of the Adobe Flash Player no longer support Power Mac G5 (pre-Intel) Macintosh computers, as even Appple has dropped support for these "legacy" machines.
    There is available a hacked version of the Adobe Flash Player version 10.x that essentially fools a web site into believing the current version 11.x is installed.  This makes it possible for us Power Mac users to view Flash videos on YouTube and the NY Times, for instance.
    The question I have is whether in using this hacked version we would be risking either incompatibilities with other Adobe applications or retaliation of some kind from Adobe.
    My gut feeling is that Adobe couldn't care less, of course, but I'm interested in hearing from anyone who has experienced actual adverse consequences because of this hacked plug-in.
    Thanks in advance.

    I don't think it's risking incompatibilities, but I do have a few concerns.  As with anything you download, you always have to worry about the source.  I'm sure that most of these builds are provided by people providing the community a service, but it wouldn't take much for an unscrupulous person to put up an installer that was completely bogus. 
    You're also bypassing the sites logic, that one can assume was put in place for specific reasons.  What this might do is unknown to me.
    The other issue is more on our side.  We've seen reports of bugs that were fixed, but now being reported again against versions that should contain the fix.  It took a little bit for us to figure out what was going but it did have some people scratching their heads for a bit .
    Regardless, I understand the position you've been put in and I've brought it up with our management team.
    Chris

  • Burned a dvd but, it will not play on my dvd player for tv

    I created a slideshow with itunes music added in iphoto.  I tried the recommended free "burn for mac" software download.  It burned a dvd but, this will not play on my dvd player for tv.  What software title can i purchase that will burn my iphoto slideshow to a dvd that will play on typical home dvd player for tv AND on a windows pc?

    some dvd players are very picky on what they will play some only
    play dvd+r some only dvd-r some can't play dvd+rw and or dvd-rw
    dvd burnable is a pretty fragmented std.

  • I think the DVD player reader on my Mac is going bad. Is there a way to copy the files off of an Apple Install DVD onto an external drive and then do theinstall from the external drive?

    I think the DVD player reader on my Mac is going bad. Until I get it fixed Is there a way to copy the files off of an Apple Install DVD onto an external drive and then do theinstall from the external drive? It's ILife 11 if that makes a difference. Finder won't let me see the files to copy. I know - dumb question.
    Thanks.
    Bob

    Adding an SSD is not a simple endeavour like adding additional memory or adding another hard drive to a Mac Pro. That's probably why the option is only offered as an option at the time of purchase. Even if your Apple store was willing to install the necessary parts you will probably be paying for 1-2 hours of labor plus the cost of purchasing the necessary service parts (SSD, bracket, cables, etc) which I suspect will make the upgrade cost much higher than what it costs to add the SSD option when purchasing a new system.
    I use my system for business and need it to work reliably.  Even though I'm fairly handy with tools I would not be willing to risk damaging my system and voiding my warranty by opening my system and removing the logic board and several other parts in order to squeeze in an SSD option and attach the appropriate cables and brackets. I'm also not prepared to deal with the hassles of explaining why my system has unauthorized parts installed in the event I experience issues and need to make use of my Apple warranty. My time is valuable, so I would probably investigate external storage options, or if I needed the speed of an SSD, I would consider selling my existing system and then purchase a new system configured with an SSD.
    If you haven't already done so I suggest doing a search on 'iMac SSD installation' to see what's involved. It might help you understand why the SSD option is not offered post purchase.

  • How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.

    How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.
    the computer:Mac Pro, Mac OS X (10.9.5), 2 x 2.66 Ghz 6-Core intel Xeon
    the TV: LG Smart tv

    The Mac uses a highly-parameterized universal Driver for every display. The parameters are set at certain times when a query is sent to your display. The display MUST answer with its name and capabilities, or the screen stays dark. A TV set that is off or "not paying attention" because it is set to a different port when the query occurs will rarely answer, and so will often remain dark.
    You can use tools in the System Report to see whether your display has been detected at all. If it has, the report will look something like this, but its name will appear:
    The times when the query is sent are:
    • at Startup
    • at wake from sleep
    • when the Mac-end of the cable is inserted
    • when using the Option ( Detect Displays ) button in displays preferences

  • I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card

    I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.

    Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
    G5 PCIe options are listed here:
    http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html

  • Can I use a MacBook pro as an external display for a Power Mac G5

    My problem is that the Studio display from 2004 is beginning to fail.  What can I use as a replacement display?  It seems that the Thunderbolt displays are out of the question, and some of the other new displays may require an Intel-based OSX.
    So, assuming I buy a MacBook Pro in the future, I'd like to continue to keep the Power Mac G5 as a back-up.  Can I use the screen on the MacBook Pro as a display for the Power Mac, and if so, how?

    Depending on what you use your computers for, the concept of using the screen of a MacBook as a display for a desktop Power Mac is about as poor an idea as I've heard in a long, long time. 
    Thanks for the chuckle.  
    PS.— There are plenty of inexpensive screens you can use instead. 

  • Can't install the Toshiba HD DVD Player for Windows 7 - 64 Bit

    Notebook: Toshiba Qosmio G40 with windows 7 Ultimate 64 Bit
    I can't install the HD DVD Player Driver from Toshiba for Windows 7 - 64 Bit 4.60.03 from 30/11/09 !
    The installation will be cancel with information that the software can not be installed on this system.

    Problem is that this file you have downloaded is not the player but just an update.
    Usually you should be able to install player designed for Vista and later install this upgrade but, as I can see, Toshiba doesnt offer HD DVD player for Vista 64-bit.
    I presume your notebook was delivered with Vista 32-bit only. Am I right about that?

  • Can i use my 2010 20" imac as an external monitor for my Power mac

    can i use my 2010 20" imac as an external monitor for my Power mac? Sounded like a 'no' a couple years back, but not sure if there are any new adapters out there.

    https://discussions.apple.com/thread/4082303?start=0&tstart=0

  • Hi, I need a video editing software for my Power Mac G5 system. Hunted all over for one! Can anyone help me and point me in the right direction. Everything I come across is for intel based systems. Many thanks in advance.

    Hi, I need a video editing software for my Power Mac G5 system. Hunted all over for one! Can anyone help me and point me in the right direction. Everything I come across is for intel based systems. Many thanks in advance.

    I have Final Cut Studio V1 - the PPC/Intel V5/5.1 cross-grade version, which would suit your requirements perfectly. (I have it for sale at present down here).
    If you keep looking, you're sure to find a similar second hand copy in your area, without the need to upgrade your graphics card.
    I'd go for Final Cut Pro as above over any version of Express. FCP has the full version of LiveType - not the truncated version that was released later on.

Maybe you are looking for

  • IPhone and iPad don't show up in Windows 7 iTunes

    Using iTunes 10.6.1.7 on my Windows 7 machine I can no longer see my iPhone or iPad when directly connected via USB (I can't see them wirelessly either but that's not the issue). I wish I could say when this started, but it's been at least a month an

  • Crediting sale tax only

    Hi How can we credit an invoice just the sale tax back without changing inventory?

  • 11.1.1.5 - Unable to copy XML to the clipboard

    Could someone do a quick check in 11.1.1.5 and see if you're experiencing this? Click the Catalog link on the common header. Click the More icon for any analysis or KPI. Click Copy. The XML should be on the clipboard, right? Now try to paste into a t

  • How-to create auto-updating fields

    Hello, I'm having a slight problem with user controlled fields on the front panel. I'm using controls in LabVIEW 8.0, and my problem is that when a user enters a new value into a numeric control field, the control does not update and pass that value

  • Fm or bapi for vl32n

    Hi all I wanted to know whether there is a fm or bapi equivalent to transaction vl32n. I tried BAPI_INB_DELIVERY_CHANGE but it dint work. pls help me