HD Enhanced Box same as X1 Box?

We have to upgrade to the HD enhanced box.  Can you get X-1 service on this box or do you need to get an X-1 box?Can you get the X-1 service WITHOUT phone service?  When I ordered the HD enhanced box today I was offered the X-1 box and no mention of phone service.  I thought they were always bundled.  The rep offered free X-1 service for 6 months, then $3.99 thereafter.By the way, we do NOT have a TV with HDMI if this is necessary for the X-1.

Enhanded HD area's need MPEG4 capable boxes for HD channels, the old DCT and DCH series are not capable of MPEG4.  Subscribers's getting notices will get an newer MPEG 4 HD box or DVR, most likely a DCX or RNG series box.  These are still legacy boxes, equivelent to what they had now, just a little newer.
X1 hardware / service is capable of anything including MPEG4.  In area's going the MPEG4 HD channels (enhanced HD).  You can certainly upgrade to X1 anytime you want, but it is not part of the Enhanced HD project.
There are X1 boxes available that you can use component cables for older HDTV's or composite video for SD TV's.  Talk to the Comcast sales agent about needing CDV, most likely no.
 

Similar Messages

  • Enhancment of datasource related query

    Hi BW Guru's
    I have datasource which having 100 fields and enhanced the same with few more new fields.But i required 60 of the existing as well new fields in BW.How would i select those fields in the datasource and get it the same in to BW.
    Please some one could help me in this scenario.
    Regards
    Prasad

    Hi Aryan,
    I think you can go to RSA6 and select your data source and bring it to change mode. Then you can simply check the HIDE boxes for those fileds which you don't want to bring to BW. Then save your changes. After that go to RSA3 and check whether your changes have populated there. Once you are done with that just replcate your data source and follow the same process.
    Regards,
    Jack...

  • DS Enhancement-Generic-??

    Hi Guys
    I got one question from my Senior....its like this...he asked me when dowe go for Generic Extraction ....
    I answered....when the standard extractors donot fit our needs....we first go to Datasource enhancement.....but when we want to add lots of fields to standard Datasource. or when we need to bring fields from various tables....we go for generic...
    then he asked.....in the case where we need to add lots of fields to standard Datasource....why dont  you still do Datasource enhancement...I said lots of coding gives performance problems...thats why I go for Generic...then He asked again...exactly at what point or how do I decide that its better to go for Generic rather than doing DATASOURCE enhancement.....
    Do any of you guys have answer for this?
    I answered.....it depends on the developer..

    hi
    2 things here...
    1. If the standard extractor don't provide data, u can enhance the same and append the new fields..but this will depend if u want to use the delta option of std extractor.. say.. in std extractor, your delta is based on certain field.. u may not want this field as delta operator.. but something else .. or u may want to add another field to this field and make this combination as delta... in this case, u need generic extractor.
    2. if there is no standard extractor, say u had build some custom table and logic.. u'll need a custom extractor
    hope this clarify your doubt

  • Error in main program assignment of enhancement

    Hi all,
    I have to create an enhancement in an include RFITEM_INC for tcode FBL1n & FBL3N.
    The objective is to populate data in a newly added field to the output of above transactions.
    For the purpose, enhancement is to be written in same form statement for both the programs, also the code required is same.
    I have created it for one program (FBL3N : RFITEMGL); and now whenever i try to create another enhancement at same location for  other program (FBL1N : RFITEMAP)  the enhancement is created again for the previous program  (RFITEMGL) for which the enhancement alreasy exists.
    Therefore, is there any method to attach same enhancement to two main programs or to successfully create two enhancements at same location attached to two different programs.
    Please note taht I have been able to create it successfully on sandbox but the above problem is occuring on client's server...anything specific?
    Please Help.
    Thanks.
    Edited by: Rekha Singh on Mar 3, 2009 2:03 PM

    answered

  • Getter & Setter Method not getting called for a field enhanced through AET

    Hello,
    I am new to SAP CRM 7.0 and working on a requirement.
    A Z-field was added by our functional guy in CRM 7.0 WebGui through AET in the 'Create Opportunity' transaction (Header data).
    Now the requirement is, as soon as the opportunity is created through the WebGui, I should post a document in R/3 and paste that document number back to the enhanced Z-field in opportunity.
    Work done by me:
    I pressed F2 on the enhanced Z-field in the WebGui screen and took the details of view, component name etc. After this I went to normal SAP CRM system and open tcode "BSP_WD_CMPWB", located the corresponding view "BT111H_OPPT/Details" and right clicked & enhanced the same.
    Then I opened the structure of this view, expanded context node, located context "BTOPPORTH" and inside this, located my Z-attribute. Now right clicked on the Z-attribute & selected the option "Generate SETTER & GETTER Methods" and these were generated successfully.
    Problem:
    The problem is even after putting external break points in these methods, these methods are not getting called while creating, modifying & displaying the Opportunity in WebGui.
    I hope that for the requirements that I have, I have to do the coding in "Getter & Setter" methods. But since these are not getting called, I am unable to proceed.
    Please help/suggest how to achieve this.
    Thanks in anticipation.
    Best Regards,
    Rahul Malani

    Hi,
    If you can see the field in UI and still get_ method is not being triggered then try to regenerate these methods. If it still doesn't work then please look for SAP notes or raise an OSS.
    There should be some note for the issue you faced.
    please refer:
    Help Needed immediately - AET getter setter methods not getting triggered
    Regards,
    BJ

  • Issue in Tree View Enhancement

    Hello Experts,
    I have a Tree View and its related Context Node Class. Due to some requirement I need to enhance the same.
    I have done the following steps:
    1. Enhance the View which eventually enhanced the CTXT class  to Z_CTXT as well.
    2. I am trying to enhance the Tree View context node( say IBASE in my example).
    When I do the same, it is giving me an error saying that
    Method CTXT - CREATE_IBASE does not exist.
    Just to recheck I went to the parent class of Z_CTXT which is CTXT and found the method was very much there.
    Refer standard component ICCMP_IBASE  View: IBTreeResultList  Context Node: IBASE. My question is related to this context node.
    Thanks in advance.
    Best Regards,
    Vinamra.

    Hi Vinamra,
    When you enhance the view by default CTXT class also will be enhanced, when you enhance the context node then only system will create corresponding method create_"context node name" in your Z_CTXT class.
    Did you check Z_CTXT class for the create_ibase method, This class should have added this method with code like this
    model   = owner->create_model(
         class_name     = 'ZCLICCMP_IB_IBTREERESULTL_CN00' "cl_crm_ic_ibase_constants=>gc_ibtree_firstlevel_class "#EC NOTEXT
          model_id       = cl_crm_ic_ibase_constants=>gc_ibtree_node_name ). "#EC NOTEXT
      ibasetree ?= model.
    Best Regards,
    Dharmakasi.

  • BSP Controller Class Enhancement - calling problem while execution

    Hi all,
    We are having a requirement in the EREC-Publication.
    We have to insert 2 Droop-down fields on screen providing the F4 help for them.
    BSP is modified to add the required fields.
    Also, the Controller class methods are enhanced so that the given F4 list table is populated.
    Here the issue is, when we call the BSP application a fresh and go to the required page, F4 help gets populated and the list is displayed. This means that the Enhancement is also being called. - Confirmed after inserting a break-point.
    Then if i navigate to "Previous page" or "Initial page" using the link that is generated by the SAP Standard. Then when i come back to the same page again. the Enhancement for filling the F4 help list is not called and as a result the F4 help remains empty...
    Is there any solution for the same i am not able to figure out what is exactly going wrong?
    Thanks and Regards,
    Kunjal Patel

    Hi Sharmila,
    The BSP Application in concern is a SAP Standard and hence, we need to enhance the same.
    What you say is correct that we need to do it in the DoInit method. However, as far as possible Modification of SAP Standard code should be avoided. For the same, we have used the Implicit Enhancement point to enhance the required Method of the class.
    This Enhancement is not called every time the class method is called. Hence, the worry.
    Any suggestions?
    Thanks and Regards,
    Kunjal Patel

  • Extract Structure Enhancement

    Hi All,
    We need to enhance the std SD extraction structure with few fields. Now for some fields already base table of 2LIS_11_VA* i.e VBAK/VBAP are enhanced and same fields i need to use in 2LIS_11_VA*. So do i need to write exit code for these fields????

    Hi,
    You have to enhance your extract sturcture by
      appending the extract structure along with other activities.
    Append the extract structure with required fields
    Enable the fields for display in the transfer structure (this will come when u save the DSafter appendings)
    Write code in the exit to populate the newly
    go to CMOD t-code check which all methods are there...and you have to find the one which is used to enhance the data sources for BW.
    Hope this helps you ..
    Regards,
    Shikha

  • WDA Component- View- Context - Default Enhancement

    Hi,
    Currently Web Dynpro Component HRRCF_C_RELEASE_PROF_UIu2019s profile status Radio Button defaults to u2018Lock Profileu2019. I need to enhance the same Web Dynpro Component HRRCF_C_RELEASE_PROF_UIu2019s profile status Radio Button defaults to u2018Release Profileu2019.
    Contextu2019s attribute u2018Profile Statusu2019 points to Domain u2018RCF_PROFILE_STATUSu2019 which has the value range u20180 u2013 Lockedu2019 and u20182 u2013 Releasedu2019. Since u20180u2019 is first entry, WDC defaults to u20180u2019. I need to set u2018Profile Statusu2019 radio button to u20182 u2013 Releasedu2019.
    It seems I canu2019t enhance the method u2018WDDOMODIFYVIEWu2019 of view u2018VW_RELEASE_PROFu2019.
    Please let me know, how to achieve my requirement with in SAP enhancement option. Do let me know, if you need more details.
    ...Naddy.

    Hi Naddy,
    You could possibly go thru the following [WDP ABAP documentation|http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm].
    Go to the Advanced Concepts section -> Modification free enhancements.
    Hope this helps
    Regards
    Wenonah

  • Subscription enhancement and reuse

    Hello!!,
    we have developed programs on Cloud using Free subscription...we have enhanced the same to Azure BizSpark....We are unable to use the jobs /work created using Free subscription.....Is there any way we could leverage or reuse what was created earlier?
    regards,
    hkkatti 

    Hello,
    It is possible that you have activated a different Bizspark subscription rather upgrading your free Trial, would recommend you to check with Azure support team regarding the same, if you can upgrade the free trial you will be able to use the jobs /work
    created using Free subscription.
    Regards,

  • BI Production as a source system on BI Development

    We have a requirement to make the Production BI environment as a source system on the Development BI environment. This is required with a view to make greater live data available in a particular cube on the Development box to aid in future enhancements
    The same Production BI environment is again reaquired as a source system on the Quality BI environment. This is required with a view to make greater live data available in a particular cube on the Quality box to help in testing/UAT activity
    My question is that corresponding to the source system BI PROD on BI DEV and source system BI PROD on BI QA.  What can I keep as a source on BI PROD itself. Can/should BI PROD itself be the corresponding source system on BI PROD ? Is it technically feasible. What are the pros and cos/risks of such a design design

    Hello,
    You can add the BW production system as a source system in the DEV and QA system without any problem. I don't believe there is any need to attache the production system as a source to itself, this connection alrady exists (the so called myself connection), if you goto RSA1 and under source system you will find a source system connection for production that points to it self, this is used for all internal datamart loads that might occur in the production system itself. Therefore there is no need to add the system again with a connection to itself.
    Best Regards,
    Des

  • PE8 selection feathering

    Hello-
    I'm having a weird issue where the Quick Selection Tool is feathering.  I checked Refine Edge and it's all at 0.  I checked the eraser and it's set to 100% hardness.  But when I erase the selected area, it feathers into the part I'm trying to keep.  I tried copy/paste into a new layer and it did the same thing so I'm guessing it's a selection issue.  I tried resetting all tools and putting the Refine Edge back to zeros but that didn't help.  It's a basic picture with only 3 layers (background copy - blank layer - original background not visible).  Suggestions?

    The Quick Selection Tool always uses a little anti-alias simalar to having anti-alias checked when using the magic wand, lasso tool, etc.
    One thing that might give you a better selection with less of a feathering effect is to check the Auto-Enhance box for the Quick Selection Tool.
    MTSTUNER

  • User Exit for CU51

    Hi All,
    Good day!
    I have a request to enhance the following upon Sales order creation.
    u2022 To Auto-instantiate the SFG material and FG material from Configurable material (KMAT) to Material Variants. Currently, there is standard functionality in SAP (CU51) that allows instantiation of material that is one level lower than the final material (FG).
    u2022 Validate whether there are duplicate material variants that already exist with the same configuration values. If yes, re-use the same material code and NOT create a new one.
    u2022 Replace the FG in the Sales Order with the material variant created for the FG material. This replacement need to be carried out for all items in the Sales Order. There can be > 1 line item in the Sales Order. The instantiation need to happen for all the items in the Sales Order.
    Step 1: Sales Admin create sales order with reference to quotation. T-code: VA01
    Step 2: Cable Design perform u2018instantiationu2019 to all SFG (create material variant) through Order BOM. This is using t-code: CU51. Sample sales order: 65.  The u2018instantiationu2019 pushbutton is shown in the red box shown below.
    The program need to ensure that all the material type ZSFG is used for the u2018instantiationu2019.
    Before material variant is created, the enhancement should also check whether there are material variants that already exist with the same configuration values. If yes, re-use the same material code and NOT create a new one.
    Step3: With the u2018instantiationu2019, the BOM and routing are created for the material variant for each level of the SFG. With the enhancement, the same action should apply for the FG.
    Step 4: Upon creation of the FG material variant, replace the KMAT with the created FG material variant in CU51.
    Basically, I would like to know the following:
    1. Whether there is any user exit/enhancement spots can be used to do auto intantiation to generate the material variant from configuration material. In CU51, it's run by sales order and 1 item a 1 time. We need to auto run for all the line items in a sales order. If there SO have 3 line items then need to proceess 3 line items.
    2. How to determine whether there are material variants that already exist with the same configuration values. 
    3. How to replace the the configuration material with the created material variant. Any user exit?
    Thanks in advance on your help!
    Regards,
    BS

    hi,
    Check the BADI "CASL_CU51_DARK".
    Userexits :
    EXIT_SAPLCASL_001
    EXIT_SAPLCASL_002
    Also Check the Package "CU" you will find many Exits and BADIs .
    Regards
    Edited by: shishupalreddy ramreddy on Aug 13, 2009 1:57 AM

  • UCCX HA over WAN

    Hi All
    I am looking at deploying a High Availability standby server on a UCCX Enhanced box over a high speed WAN.
    I know that it isn't recommended (or supported) according to the SRND but I am interested if it is actually possible?
    Anyone done this before?
    It maybe possible to keep the 2 boxes on the same VLAN if this helps but again the SRND says they must be in the same 'building', why i'm not sure??
    Any help appreciated
    Cheers
    Andy

    Andy, if you lose Heartbeats to the Unified Call Manager on the master, the slave might not kick in in doubt if there is or not a master in service and do a master reelectioninstead causing the call in progress to be lost while it is busy doing so.
    I could assure you it is unfortunately still something quite common in the event of a WAN connection even with some of the most reliable ones.
    Regards,
    Riccardo

  • Late 2007 15" MBP Very slow after upgrading to Mavericks

    Hi guys,
    this is my first post here. I look forward to learn and help others.
    The reason of this post is, as outlined in the title, slow paerformance of my computer after upgrading to Mavericks. It was kinda slow from before but this time it's almost unbearable to use it. I used to be able to run VMWare with 2 XP and 1 windows server machines WITH JUST 2 GB OF RAM! Now I have 4 GB and can barely run a single virtual machine with XP and the cooling fans come on just by watching a video on youtube, which also makes performance take a dump.
    These are the specs extracted from EtreCheck:
    Hardware Information:
              MacBook Pro (15-inch  2.4/2.2GHz)
              MacBook Pro - model: MacBookPro3,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              GeForce 8600M GT     - VRAM: 256 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    Startup Items:
              DynDNSUpdater - Path: /Library/StartupItems/DynDNSUpdater
    System Software:
              OS X 10.9 (13A603) - Uptime: 6 days 2:7:17
    Disk Information:
              WDC WD5000BEVT-00ZAT0 disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 149.92 GB (76.8 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
                        Storage (disk0s4) /Volumes/Storage: 349.19 GB (54.74 GB free)
    USB Information:
              Apple Inc. Built-in iSight
              Apple Inc. Bluetooth USB Host Controller
              Apple Computer Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
              com.rim.driver.BlackBerryUSBDriverInt          (0.0.74)
              com.globaldelight.driver.BoomDevice          (1.1)
              com.eltima.SyncMate.kext          (0.2.5b15)
              com.vmware.kext.vmci          (90.4.18)
              com.vmware.kext.vsockets          (90.4.23)
              com.vmware.kext.vmnet          (0104.03.86)
              com.vmware.kext.vmx86          (0104.03.86)
              com.vmware.kext.vmioplug.10.1.24          (10.1.24)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.adobe.SwitchBoard.plist
              [invalid] com.bjango.istatmenusdaemon.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.rim.BBDaemon.plist
              [loaded] com.synium.cleanappdaemon.plist
              [failed] rapiback.plist
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist
              [loaded] com.bjango.istatmenusagent.plist
              [loaded] com.epson.epw.agent.plist
              [loaded] com.rim.BBAlbumArtCacher.plist
              [loaded] com.rim.BBLaunchAgent.plist
              [loaded] net.culater.SIMBL.Agent.plist
              [loaded] org.gpgtools.macgpg2.gpg-agent.plist
              [invalid] org.gpgtools.macgpg2.gpg-agent.plist.plist
              [failed] syncmateStarter.plist
    User Launch Agents:
              [loaded] com.google.keystone.agent.plist
              [loaded] com.spotify.webhelper.plist
              [loaded] com.valvesoftware.steamclean.plist
    User Login Items:
              Boom
              Flux
              iTunesHelper
              Dropbox
              Cinch
    3rd Party Preference Panes:
              Application Enhancer
              Box Sync
              Flash Player
              Flip4Mac WMV
              FUSE for OS X (OSXFUSE)
              GPGPreferences
              Perian
    Internet Plug-ins:
              Default Browser.plugin
              DirectorShockwave.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              Flip4Mac WMV Plugin.plugin
              Google Earth Web Plug-in.plugin
              JavaAppletPlugin.plugin
              MeetingJoinPlugin.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
              Unity Web Player.plugin
    User Internet Plug-ins:
    Bad Fonts:
              None
    Time Machine:
              Skip System Files: NO
              Auto backup: NO
              Time Machine not configured!
    Top Processes by CPU:
                  22%          vmware-vmx
                   6%          Google Chrome
                   4%          WindowServer
                   3%          coreaudiod
                   2%          Boom
                   1%          EtreCheck
                   0%          BBLaunchAgent
                   0%          mds_stores
                   0%          CleanApp Daemon
                   0%          mds
    Top Processes by Memory:
              586 MB             vmware-vmx
              135 MB             Finder
              98 MB              Google Chrome
              90 MB              softwareupdated
              74 MB              Dropbox
              66 MB              VMware Fusion
              59 MB              mds_stores
              58 MB              Google Chrome Helper
              53 MB              WindowServer
              45 MB              systemstats
    Virtual Memory Statistics:
              40 MB              Free RAM
              1.18 GB            Active RAM
              1.13 GB            Inactive RAM
              1.07 GB            Wired RAM
              24.09 GB           Page-ins
              645 MB             Page-outs
    I understand it says my RAM is way too low, but hve no idea what's killing it. So far I've disabled and uninstalled all DynDNS items. I just read about Chrome's slow performance for MBP's and plan to switch back to Safari (Firefox made my computer even slower).
    Thanks in advance for any light shed on this.
    Oscar.

    Thank you Kappy, while I was reviewing the log from EtreCheck I noticed the 3rd party preference panes, launchers and daemos. I deleted a few of them and it really helped with system performance. Reading your reply confirms that what I did was the right thing; here is an updated log from EtreCheck:
    Hardware Information:
              MacBook Pro (15-inch  2.4/2.2GHz)
              MacBook Pro - model: MacBookPro3,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              GeForce 8600M GT     - VRAM: 256 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 0:22:52
    Disk Information:
              WDC WD5000BEVT-00ZAT0 disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 149.92 GB (77.67 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
                        Storage (disk0s4) /Volumes/Storage: 349.19 GB (54.09 GB free)
    USB Information:
              Apple Inc. Built-in iSight
              Apple Inc. Bluetooth USB Host Controller
              Apple Computer Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
              com.rim.driver.BlackBerryUSBDriverInt          (0.0.74)
              com.globaldelight.driver.BoomDevice          (1.1)
              com.eltima.SyncMate.kext          (0.2.5b15)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.adobe.SwitchBoard.plist
              [invalid] com.bjango.istatmenusdaemon.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.rim.BBDaemon.plist
              [loaded] com.synium.cleanappdaemon.plist
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist
              [loaded] com.bjango.istatmenusagent.plist
              [loaded] com.epson.epw.agent.plist
              [loaded] com.rim.BBAlbumArtCacher.plist
              [loaded] com.rim.BBLaunchAgent.plist
              [loaded] net.culater.SIMBL.Agent.plist
    User Launch Agents:
              [loaded] com.google.keystone.agent.plist
              [loaded] com.spotify.webhelper.plist
              [loaded] com.valvesoftware.steamclean.plist
    User Login Items:
              Boom
              Flux
              iTunesHelper
              Dropbox
              Cinch
    3rd Party Preference Panes:
              Box Sync
              Flash Player
              Flip4Mac WMV
              FUSE for OS X (OSXFUSE)
              Perian
    Internet Plug-ins:
              Default Browser.plugin
              DirectorShockwave.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              Flip4Mac WMV Plugin.plugin
              Google Earth Web Plug-in.plugin
              JavaAppletPlugin.plugin
              MeetingJoinPlugin.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
              Unity Web Player.plugin
    User Internet Plug-ins:
    Bad Fonts:
              None
    Time Machine:
              Skip System Files: NO
              Auto backup: NO
              Time Machine not configured!
    Top Processes by CPU:
                   5%          WindowServer
                   4%          coreaudiod
                   3%          com.apple.qtkitserver
                   2%          com.apple.WebKit.WebContent
                   1%          EtreCheck
                   1%          Boom
                   0%          SystemUIServer
                   0%          BBLaunchAgent
                   0%          CleanApp Daemon
                   0%          Safari
    Top Processes by Memory:
              180 MB             com.apple.WebKit.WebContent
              152 MB             com.apple.IconServicesAgent
              119 MB             Safari
              90 MB              mds_stores
              82 MB              com.apple.quicklook.satellite
              78 MB              com.apple.iTunesLibraryService
              66 MB              Dropbox
              57 MB              Finder
              49 MB              Preview
              41 MB              CleanApp Daemon
    Virtual Memory Statistics:
              846 MB             Free RAM
              2.02 GB            Active RAM
              620 MB             Inactive RAM
              561 MB             Wired RAM
              1.22 GB            Page-ins
              0 B                Page-outs
    I was reading about GeekBench in the discusions and decided to give it a go, although I was able to only perform the 32-bit tests, I got 1268 on the single-core score and 2187 for the multi-core score; I don't know how good or bad those numbers are. Wish I had a before and after reading but I read about it too late, when I had already erased several items.
    I will appreciate any further input BEFORE I decide to reinstall the OS from scratch.
    Oscar.

Maybe you are looking for