HD Exporting from FCE to MPEG-4 for playback on Bluray (ps3)

I have been attempting to export HD video (Canon HV20) from FCE and Quicktime Pro to MPEG4 1080. The resulting MPEG4 is very blocky to watch on my iMac. I have not yet burned this onto DVD to watch it on my PS3. Could anyone recommend the propoer steps and settings to aachieve a good HD image in MPEG4.
Also, when I export to Quciktime MPEG4 the image looks much better, but of course the PS3 does not play .mov files, just MPEG4's.
Any help would be appreciated. Thanks

Export to MPEG-4. Set the codec to H.264 and the data rate quite high like 18000kbps and the frame rate to 29.97.

Similar Messages

Best codec for export from FCE?

Heya, I'm sort of a newbie, so please be patient with me
I'm trying to export a video from FCE using QT conversion. I'm going to be putting it on Youtube. What is the best codec for export? I've always heard that H.264 is the 'best', but my videos have always been pale and washed out. I tried exporting using MPEG-4 video, and it's not washed out. Is H.264 better and I should just deal with the paleness, or does it not matter too much?
Thanks

All the Web video sites re-compress your videos. So it's generally best to upload high quality files – typically determined by bit rate.
My suggestion would be to export as a Quick Time movie at current settings. (Guessing that you edited an AIC sequence,)
If you don;t have MPEG Streamclip, do a search and download it. In Streamclip, open the file you exported from FCE. Export to Quick Time. For Compression, choose H.264 from the drop down menu. Don't change Frame Size. If your movie is interlaced, check De-interlace. Check the Limit Data Rate box and type in 12,000 if the size of your movie is1080; 6,000 if your movie is 720; 3,000 if your movie is 480.
Use the YT uploader and you should be good to go.
Russ

Best settings for export from FCE to Web

I'm trying to get a 20-minute project (audio and video) exported from FCE to iWeb in reasonably high quality. I've consulted the manual, and have tried various compression settings and consulted some online tutorials, to no avail - more often than not, if it "publishes" to iWeb, the resulting file looks like it will take the better part of forever to buffer. Any recommendations?

Well, not sure about what you mean “in reasonably high quality”...?
What export-settings did you use...? size and codec...?
A twenty minutes project for the web in reasonably quality...?
Did you start with your project in FCE with the best and highest uncompressed resolution ?
Did you export (compress) from this resolution once to your desired web format ?
Doing file compression properly, I guess, one needs years of experience...
There are far to many variables one has to consider...
t’s rather an art-form than exact science...
Anyway...
If you like, here are one of my settings:
Compression H.264 / Frame Rate Current / Key Frame Automatic / Quality Medium /
Data Rate Automatic (higher rate - higher file size) / Encoding Best Quality /
Size 480 x 270 (16:9) / Sound AAC Stereo 44.1 kHz (Mono and lower Rate reduces size).
Regards
Nolan

Aspect ratio issues in iDVD with mov files exported from FCE

Please help. I believe this is an iDVD bug. I have found some relevant discussion of it on online forums - but have not found a solution that works for me. I am looking for a workaround.
http://discussions.apple.com/thread.jspa?threadID=1356500&tstart=31
PROBLEM STATEMENT:
My 4:3 movies, exported from FCE in QT-with-conversion formats (any 4:3 format) - appear in iDVD with gray side-pillars (as expected for 4:3) AND with a black line (letter-boxing) at top and bottom - as would be for 16:9. It appears the aspect ratio is also distorted i.e. 16:9. (The iDVD project is set to 4:3.)
1- A 4:3 mov file exported from FCE using Quicktime Movie format (no conversion) does not have the problem, but I cannot de-interlace the video using this export mode.
2) A 4:3 mov file exported using QT-with-conversion mode (any 4:3 format) DOES have the problem. I need to use this mode in order to get de-interlace.
(Exception: 640x480 VGA mode does not have the black lines, and it displays correctly in dvd player on my computer screen - but on the TV screen, it crops content from the top and bottom of the movie, so this is not an option.)
3) In Finder, if you click on mov file exported QT-only (no conversion), it opens in the FCE viewer. If you click on mov file exported in any other 4:3 mode, it opens in Quicktime viewer (i.e. there is absolutely something different in the header/ID of these files.)
4) All mov files, regardless of export mode, show correctly in Quicktime viewer - no black line, no distortion. The problem does not occur outside of iDvd.
5) I tried passing the QT-with-conversion mov files through an Inverse-Anamorphicizer (per suggestion on forum - this apparently fixed the problem for some people) but the resulting output mov (i.e. the inverted product) still had the same problem.
I am, so far, left with this trade-off: Give up the de-interlacing, or live with the letter-boxing/ distortion. Neither is acceptable.
I am looking for a workaround:
1) A way to export de-interlaced 4:3 mov from FCE that shows in correct ratio in iDVD
2) A way to "convert" / re-head mov file after exported so that it displays corrrectly (inverse-anamorphicize) so that iDVD reads it correctly
3) Can the mov be de-interlaced after the fact (so I could use QT export without conversion)?
4) Something besides iDVD to put this together - that doesn't have this problem? (I like and want to use the iDVD menu/theme.)
5) Other?????
I also notice that all the QT-with-conversion mov files are 1/3 to 1/2 the size of the QT-only mov file, which is valuable and preferable to me. (I don't see any quality difference in the display...)

In the Preview window > top frame > middle button
do you have correct for pixel aspect ratio checked or not?
!http://i533.photobucket.com/albums/ee340/gogiangigo/Picture1-4.png!

Export from FCE is different then the timeline

hi there, when I try to export from FCE the output file is different from the video in my timeline.
It concerns a screengrab recorded with QT10. That QT file is converted to a Apple intermediate codec - as I normally do with QT files.
I edit it & then export it to a h.264 QT HD file. There's clearly a difference between the final QT and the video in the timeline.
Shots mysteriously appear where they can't be seen in the timeline, cuts are not exact where I've put them.
I've tried a different output codec, re-did my AIC encoding but nothing helps..
Can't find any logical reason why this happens. It's the first time I've had this happen.
Thx for feedback
WS

I've tried several things but the problem remains.
I made a new AIC file @15fps and exported again to h.264 @ 15fps but I still see shots that are not in the timeline.
I have the impression that the exported files add about 10 frames ahead of the cut that I make in the timeline...
Any helpfull insights are welcome
Thx

Quality problem exporting from FCE

Hi,
i have a quality problem exporting from FCE. I have finalized a 30 minute movie and want to send it to friends on DVD or CD-ROM. when i use "export as quicktime movie" the file has 6.5 GB and won't fit on a DVD-ROM. when i use "export with quicktime conversion" and choose quicktime movie with H.264 compression and highest quality the movie goes down to 4.2GB. Now it would fit on a DVD-ROM, but the quality is not good. The picture looks blurred and i see some type of interlace-effect.
which type of export format do i have to choose to avoid the interlace and blurred pictures? is there a magic format that does not cost that much quality and reduces the movie by 30-40%? or would a video DVD work better? how do i create a DVD? with iDVD?
thanks for your help!

or would a video DVD work better? how do i create a DVD? with iDVD?
That's what Id do.
Export as QuickTime Movie (reference file is OK) and drop the export to iDVD.
You will get 1 hour of FCE Timeline on a single sided disc using Best Performance (iDVD setting).
Two hours using Best Quality (iDVD setting)
Al

Exporting from FCE to iDVD

No matter what I do iDVD 09 quits with a "iDVD unexpectedly quit . . " message after exporting from FCE.
The movie has 12 chapters and includes chapter markers.
I have tried to rename file, repair permissions, delete plist prefs, save as disk image, have plenty of hard disk space but all with same result.
Any suggestions?
Doug

Hi Michel,
Here is what I did (and settings)
FCE 4.0.1
Mac OS X 10.5.8
QuickTime Player 7.6.2 (518)
Format: .mov
No Itunes purchased. Just converted one or 2 mp3s to .aiff format
Export settings from FCE:
Export: as Quicktime Movie
Include: Audio and Video
Markers: Chapter Markers
Make Movie self-contained: unchecked
Thanks!
Doug
All media stored on external hard drive but when I burn DVD I bring .mov file
onto my desktop.
Using standard DVD R disks from Staples

Exporting From FCE to IDVD With Chapters How long

Exporting From FCE to IDVD With Chapters How long will the DVD hold??? if i have an hour and 40 minutes of HD footage all cut together with FCE and has been saved as a movie file, how many hours will IDVD let me burn to it?
if i run over the allowed amount will it say i need to drop quality, i am editing loads at the moment and dont want to get to the end and it come up with an error message. also will idvd include the chapter markers if i export with them?

Sure, no problem.
1. Go to Project > Project Info in iDVD.
2. Make sure "DVD Type" is set to a single-layer DVD.
3. Under "Encoding," choose "Best Performance." Is the arrow solidly in the green portion of the quality bar? If so, go ahead and burn your disc.
4. If not, choose "High Quality." Again, go ahead and burn your disc if the arrow is solidly in the green.
3. If the arrow still isn't in the green, select Professional Quality. If the arrow's in the green, burn your disc. If not, you'll have to delete some of the menus (scene selection, etc.) or menu content and check again. You should be able to burn up to 2 hours if you don't have a lot of other menu content.

Exporting From FCE 4 to Quicktime in HD

Whenever I try and export my finshed HD project from FCE 4 to Quicktime, it exports fine but is no longer in HD. Its quality degrades by quite a bit.
How can I export from FCE 4 to Quicktime and keep its HD quality?
thanks, will

Hi(Bonjour)!
What is your sequence format?
Do you export a +quicktime movie self contained+ or export +with quicktime conversion+?
What settings (video codec, frame size, bit rate) do you use in the second option?
How do you monitor your exported movie (on your mac, SD TV set, HD TV set, apple TV, DVD, blur-ray, SD DVD)?
Michel Boissonneault

Best way to export from FCE for compression?

Hi again, folks!
I've read/learned that, when you plan to compress your video, you should ideally export from your editing program in the final resolution (size) that you want the video to be. Apparently this is because editing programs do a better job of sizing the video than do compression programs (such as Sorenson Squeeze, which does its best work doing only compression). What I'm wondering is this: When I export to QuickTime from FCE, I have two options, namely Export as a QuickTime Movie, or Export Using QuickTime Conversion (which allows me to save as a QuickTime or other format). So, my question is, if I Export Using QuickTime Conversion, does this actually "convert" the video to some 'bastardized' version of QuickTime, or does it just reduce the size? I'm asking because I don't understand why, on the one hand, FCE refers to exporting a full size video as simply "Exporting as QuickTime" while on the other hand (eg. when I'm lowering the resolution), it's called "QuickTime Conversion" (which is lumped in with a whole bunch of other output format possibilities such as .avi, mpeg4, etc).
I'm probably not being as clear as I'd like, but more simply put, why does FCE consider going from hi-res QuickTime to low-res QuickTime a 'conversion'?

One suggestion I received (just tonight) from another forum was to export the video from FCE, but not as a self-contained movie; this way (I'm told), the video is not being compressed or otherwise altered, and hence will give me the best results when I compress
The information you received on the other forum was half right and half wrong. The difference between a self-contained movie and a movie that isn't (known as a 'reference' movie) is NOT the quality; it's that the self-contained movie is an exact copy of what's in your Sequence while the reference movie only refers to the original media and renders ... it doesn't copy it. Since reference movies rely on the original media (and render files) for playback or when used in other applications (like Sorenson Squeeze), they will not work properly on any other system nor will they work if any of the original media or render files are moved, deleted or otherwise altered.
The quality of the two types is identical.
-DH

Export from FCE

Hi all
I´ve just completed my first project using FCE. The result on my Mac looks great, and when I´m exporting as a Quick Time Movie the result is also fine. The only problem is that the file size is 9GB for just under 9 mins of video. The original videoclips is shot on a Sony AVCHD cam in 1920x1080i resolution. My problem is how to fit the movie into an AVCHD-DVD using Roxio. I´ve tried to export the movie using MPEG-4 and 18000kb/sec as suggested in Tom Wolskys exellent FCE4-book, but then the result is all pixelated and looks overcompressed.
Any suggestions?

Hi again
Now I´ve tested your suggestion Tom, and it worked like a dream!
The picturequality was just like watching a BD-disc.
Thanx again!
Kjetil

Export from FCE to iDVD, results in black border around movie

Here is the problem....
I have edited a movie in FCE where all of the footage is 1440 x 1080
I export it using: File -> Export... QuickTime movie
I choose "self contained" movie and "audio/video", plus "chapter markers" in the pop up menu.
I then take this into iDVD amd all looks ok in the preview, but once burnt to DVD, there is a large black border around the entire movie. It is almost like it is a smaller movie which does not fill the screen correctly.
Any idea why this happens and how to overcome this. When I lok at the exported movie from FCE- it is 720-x576 and not the full size- is this the problem?
Thanks for any tips.

Hi
Is it widescreen ?
Did You in Your browser window set sequence and material to anamorphous. To me it was a revelation that the Browser window was exstendably to the right with lot's of columns - and one of them was Anamorphous.
Did you start a WideScreen project in iDVD - First window that opens after You clicked Start a New iDVD project (top button). At bottom this new window You set 4:3 (SD format) or 16:9 for WideScreen.
In iDVD You also need to go up to Project and down to Projectinfo
then set 16:9 here TOOO !
Proportion - Change it to 16:9
When I go from FinalCut to iDVD - I do
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
Brand and type of DVDs used ( Important as cheap brands DO NOT WORK )
• I use Verbatim
• I use DVD-R
Burn speed set (IMPORTANT)
• I set down this to x4 (or x1)
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Problems - then Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

How to export from FCE to mini dv?

Im trying to print the film I made back onto minidv, but I must be doing something wrong... I click the option of Print to Video etc and it plays back and even starts recording on the camera but nothing is recorded on the camera, it just stays on the blue screen. Can anyone help?
Can you not use firewire to export it back onto the minidv tape? do I need some other kind of cord?

You need to set up FCE to output to Firewire - do this in View > Video > Firewire. Once you have set that option, in FCE you can send output to your camera via Print to Video or just by playing the timeline.
But your camera also needs to be ready to record from the correct input. Normally the DV connector on your camera is used to play tapes (ie. output) to your Mac for capture by FCE. When you want to record from FCE back to your camera, you may have to change a setting in your camera to enable DV input - usually the choices are either a/v (meaning analog video) or DV (Firewire DV) video in.
Finally, your camera needs to be in VCR or VTR or Tape record mode (whatever your camera's manufacturer calls it), usually done via a button or two on the camera body. It is definitely not the setting for recording video through the lens.

How to improve quality of stills exported from FCE?

Hello,
I am in the habit of exporting a still from video to use on the opening screen of iDVD and the DVD label. I've noticed that the quality of the stills I'm exportng from FCE is much worse that the quality I get from iMovie from the same piece of video. I am wondering if I have the playback settings in FCE at less than optimal and so the stills are not as good?
To export I use Quicktime Conversion and export as a jpeg at 29.97 fps.
Any suggestions would be appreciated.
Rita
Dual 2 GHz PowerPC G5 Mac OS X (10.3.9)

Hi Tom,
Thanks for the reply. This is what I am doing and selecting "highest quality". It seems the playback in FCE isn't as good as in iMovie and so the frame I am selecting isn't as good either. Do I possibly have some setting that is making the playback of lesser quality? The video is fine when I export it and burn it to disk.
Rita

Export from FCE extremely slow after Snow leopard install

Instead of increasing my export times from FCE Snow Leopard has made them slower by a factor of ten. It is taking an hour to convert 3 minutes of 1080i to 720p !!!!! On an 8 core machine !!!
I am exporting 1080i to 720p with a bitrate of about 2000 for uploads to Utube. I tried using QT10 for export but I am not happy with the loss of control over my exports, it does work but not directly from FCE. The process called by QT10 is very fast and uses all 8 cores, but that process is not being called by FCE.
So at this point I wish I had never gone for the upgrade.
Lots of crashes with QT 7 during the open file dialogue and also same problem with MPEGStream Clip crashing on the file open dialogue as well after this OS upgrade

I may not be having a snow leopard problem at all.
Going back to an old project in 1080i of an 8 minute length. the estimated time to render is about 50 minutes it says @20% of the way thru. Thats about 6x real time.
Maybe thats what I should expect. I was hoping for a significant speed increase in rendering times with the new OS. What is teh factor averaging for other people ?
I am rendering down to 720p multi pass 2320 kbit rate .MP4 in h.264
Maybe I have a settings problem in project properties in my other project.
I also got inspired and moved the render folders to a separate disk from the source files and put the caches on a 3rd drive. my I/O readings now are at 60 reads/sec.
Thanks for helping me work this issue out with you guys. Will keep you posted.

HD Exporting from FCE to MPEG-4 for playback on Bluray (ps3)

Similar Messages

Maybe you are looking for