HD files not visible

Hi,
I have a first generation Apple TV and i have been very happy with it. I have programs that can create digital copies of my DVD's that I keep on an external Hard Drive and stream to the Apple TV.
Recently I began creating HD versions of some movies I have on Blu-Ray. They are now in iTunes and i can play them on my computer. When I sync with my Apple TV (I do this to ensure the Apple TV can see all new files in iTunes, the content is still streamed) It won't display any of the HD files.
When I go into the Devices options for the Apple TV and open the Movies tab, the HD files are not listed at all.
Is there any reason the Apple TV won't see these files? I have rented HD films directly on the Apple TV, so it should be able to play these.
Any advice or help will be greatly appreciated.
Thanks in advance

Make sure they are compatible with the ATV (see table below)
H.264 and protected H.264 (from iTunes Store): Up to 5 Mbps, Progressive Main Profile (CAVLC) with AAC-LC audio up to 160 Kbps (maximum resolution: 1280 by 720 pixels at 24 fps, 960 by 540 pixels at 30 fps) in .m4v, .mp4, and .mov file formats
iTunes Store purchased video: 320 by 240 pixels, 640 by 480 pixels, 720 by 480 pixels (anamorphic), or high-definition 720p
MPEG-4: Up to 3 Mbps, Simple Profile with AAC-LC audio up to 160 Kbps (maximum resolution: 720 by 432 pixels at 30 fps) in .m4v, .mp4, and .mov file formats

Similar Messages

Why are shared files not visible when iPhone4S connected to iTunes?

What makes this problem mysterious is that I have exactly the same settings on the same or eqivalent Apps on iPad2 and iTunes4S but when my iPhone is connected to my iTunes (running on my PC under Win7) it shows no files on Apps like Pages, iBooks, Keynote, and Print-n-share. Each of these Apps has files and each shows files when I connect my iPad2. I cannot export or import filesto/from itunes and iphone because the list of files inside the Apps is not visible in itunes.
PS I CAN, btw, export and import files by using the amazing App and service "DropBox" which is the only route in and out of my iPhone (I am not ready to use iCloud).

This is not a reply but an addition. While searching for answers as to why "Shared" files in original Apps in my iPhone4S did not appear on itunes I came across a similar discussion on another Forum in which Jim described in some detail how to get the two devices (my iPhone 4S and my iPad2) to recognize similar embedded files in similar Apps. https://discussions.apple.com/message/16690584#16690584
I went through this promising procedure but it did not help. Since the two devices are independent (I think -- they are on the same accoubt but ar different devices) I should be able to make them work the same way with regard to what is seem in iTune.

Airport Extreme files not visible on USB drive.

Airport Extreme files on Toshiba USB powered drive not visible through Windows. I disabled antivirus with no change. If I copy files onto it they go but then disappear. If I copy again it asks if I wish to overwrite the file as its already on the drive I just can't see them there. I tried another computer, also Windows 7, on our network with the same results. It is formatted as Fat32 and is recognized by the Airport. It is a 1TB size drive.

double post.

SQL Developer export files not visible

Hi All,
I've started using SQL Developer recently and I am completely new to this tool.
I've noticed a weird problem. All the export files and the folders I create from SQL Developer is not visible from the normal windows. Say I've executed a query and I need to export the output to a file. I right-click on the data grid; select Export Data -> xls/csv (anything) . I get a pop to mention the Location of the file. I click on Browse ; then select the location and then click on apply. I expect the file to be created. But when I go to that folder; I do not find any files.
To add on to my suprise; If i click on open a file and navigate to the above mentioned path; the pop-up shows that the file is present in that folder. But it is not visible from Windows. This is of no use as I cannot use those files.
BTW; version is 2.1.1.64
Note: I've also enabled the option of viewing all hidden files and folders in Windows.
Regards,
Arun

Hi Arun,
If you are using Windows Vista, Windows 7, or higher, and writing to a directory (like C:\, C:\Windows\, C:\Program Files\) that Microsoft wishes to protect from malware or just simple clutter , then you are running afoul of a redirect feature in the OS that puts the unwanted file in a VirtualStore folder for your user name, specifically:
C:\Users\<yourusername>\AppData\Local\VirtualStore\<full path where you think the file got stored>See the following for details:
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folder-redirect-in-windows-7/95218744-37e6-40cd-b890-2e647351df16
I just ran across this myself for the case of C:\ and perhaps this applies to your situation also.
Regards,
Gary

DNG files not visible in Lightroom 2.5

I've installled Lightroom 2.5 in my old desktop (Pentium 4, 1 GB RAM, Windows XP Home SP 3). After I've imported my camera RAW (NEF) images into Lightroom as DNG, I can see the photo info but photos are not visible.How can I make them visible?

I wonder if you have been using sidecars, as I had assumed. Maybe you've got a metadata template? "XMP files" norrmally refers to sidecars, but could refer to templates too. So which is it? How exactly have you been assigning this file to images in Photoshop? I don't know the detail of Photo Mechanic, though I'm betting your friend has been applying a template. If you do this first, you can then use that Read metadata technique. Once you've done that once, in LR you can save the metadata as a preset, or sync it to other images. Sadly LR can't read metadata templates directly.

TS1493 files not visible on ipod nano after disconnect from itunes

I have an iPod Nano (6th generation - 16 Gb) which was purchased in early 2011. All of a sudden all files in all categories (music, audiobooks, podcasts, etc) are no longer visible once it is disconnected from iTunes on my laptop. When reconnected to the laptop the files are visible again in iTunes - so they are still on the device. I have searched the Apple online support info and that only seems to provide complicated and unhelpful information about redesigating hard drive network maps etc., which is an action I am not prepared to risk for fear of making a bad problem worse, or contacting my "administrator" - which is me! Can anyone offer any solutions that don't require a PhD in computer science?

Here are a couple of additional pieces of information that might provide a clue:
1) At home, my iPod shows up as having the name I used when I registered it. On the second computer, my iPod shows up with the name DATA1.
2) I have an iPod 4GB mini. At home, that's pretty much the amount of space that shows up in the disk space bar (near the bottom) of iTunes. However, on the second PC, the disk space bar shows 10.35 GB used, 15.66 GB free! Which is just freaky, since it's still a 4GB iPod mini.
3) According to the iTunes display, everything is transferring absolutely smoothly. Since the iPod is configured to transfer music manually, the Do Not Disconnect sign is flashing throughout, but when I'm done and click on the eject iPod button in the lower right hand corner, it turns off, just the way it's supposed to and I can disconnect my iPod. It's just that my songs aren't visible anywhere on my iPod when I try then to play them.

Flash file not visible in web page

Hello,
I'm Udayakumar from chennai (India). I created some flash
files and uploaded in web site. That are working properly in India
only. But not visible in other countries. What's the problem? I'm
exporting in swf format with following settings.
Version - Flash player 8, Loard orfer - bottom up,
Actionscript version - actionscript 2.0, options - compress movie,
local play back security - local files only.
And I'm inserting the swf files in html pages using plugin
commands. (ie)
<embed width="100" height="100" src="images/x.swf"
menu="false">
So I can't able to understand, why was the flash files are
not visible in other countries?
Pls explain me......
My email id - [email protected], [email protected]
Thanks & Regards
P. Udayakumar

You will need the following in your HTML (with modifications
to target your document) ...



<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
width="pudaya enter your document width here" height="pudaya enter
your document height here" id="pudaya enter swf file name here
(without ".swf" extension)" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="movie" value="pudaya enter swf file name here
WITH ".swf" extension" /><param name="quality" value="high"
/><param name="scale" value="noborder" /><param
name="bgcolor" value="#pudaya enter background color as hexidecimal
here" /><embed src="pudaya enter swf file name here WITH
".swf" extension" quality="high" scale="noborder" bgcolor="#pudaya
enter background color as hexidecimal here" width="pudaya enter
your document width here" height="pudaya enter your document height
here" name="pudaya enter swf file name here (without ".swf"
extension)" align="middle" allowScriptAccess="sameDomain"
type="application/x-shockwave-flash" pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>
All of the above will be generated with all values in place
using the "Publish Settings" function in Flash if you check HTML as
one of the export settings.

Dreamweaver CS3 Remote files not visible

Hello,
I have a problem with DW CS3. When I click on remote view, I
cannot see my files. I can connect via Filezilla, and I can log
onto the remote server control panel and all of the files are
there. The site is working fine. When I try "preview in browser"
command, I get a page cannot be found error. Afterward, there is a
folder visible in remote panel with the temp file in it. Here is
what I have tried so far:
Deleted the site in site management panel and set up again as
new site.
Toggled passive FTP, same problem either way.
Everything was working fine until this week when I started
having problems getting DW to connect via ftp. The connection
became intermittent, then seemed to die. Now when I use the site
management panel to test the connections, they work fine, but I
can't see the files.
I have not recently installed or changed any software on my
PC.
I am using Win XP
Any ideas?

Please tell us the following:
1. Do you have a Testing server defined? If so, what are the
field
contents on that page?
2. When you connect to the site and then expand the Files
panel, which
server icon at the top is selected? Is it the one with the
lightning bolt?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jackhmr" <[email protected]> wrote in
message
news:gmcgk7$ihr$[email protected]..
> Hello,
> I have a problem with DW CS3. When I click on remote
view, I cannot see my
> files. I can connect via Filezilla, and I can log onto
the remote server
> control panel and all of the files are there. The site
is working fine.
> When I
> try "preview in browser" command, I get a page cannot be
found error.
> Afterward, there is a folder visible in remote panel
with the temp file in
> it.
> Here is what I have tried so far:
> Deleted the site in site management panel and set up
again as new site.
> Toggled passive FTP, same problem either way.
>
> Everything was working fine until this week when I
started having problems
> getting DW to connect via ftp. The connection became
intermittent, then
> seemed
> to die. Now when I use the site management panel to test
the connections,
> they
> work fine, but I can't see the files.
>
> I have not recently installed or changed any software on
my PC.
> I am using Win XP
> Any ideas?
>

Properties in TDMS file not visible in Diadem

Hi,
I'am using Diadem 2011 to read a tdms file created in LabVIEW 2011.
In diadem i cannot see the properties (file, group or channel) i added myself to the tdms file, in LabVIEW withe the TDMS file reader they are visible.
Attached (in the zip), the TDMS file and an word doc with some screenshots.
Somebody knows what i'm doing wrong?
thx
Ben Engelen
Solved!
Go to Solution.
Attachments:
No Properties in Diadem 2011.docx ‏186 KB
BenenWalter.zip ‏190 KB

Hello Ben,
the properties are loaded but not all properties are displayed in the Properties node in the tree control automatically. The context menu offers the ability to display properties in the tree.
But if you klick on the main root/group/channel node in the tree the properties are displayed in the window right bottom. There you will see your properties.
But in the DIAdem/DataFinder naming conventions following happens.
If you use one of the following characters in a custom property name, DIAdem replaces this character with an underscore: ., :, ,, ;, ', \, @, <, >, #, [, ], %, (, ), {, }, |, *, ?, =, !, ", ^, $, &, +, -, /, and a space.
So if you do not want to run into this you should rename the properties
Greetings
Andreas

Why is a .txt file not visible on iPod Classic in its entirety once the iPod is disconnected from the desktop?

I have enabled my iPod Classic for disc use; and previously successfully transferred .txt files. The latest .txt file is fully visible on the iPod while the iPod is connected to the desktop, but once the iPod is disconnected only about 20% is visible. It is as though the wheel will rotate no further to reveal the rest. There is masses of free space on the iPod.

Only the first 4000 characters of a longer note will appear from the device itself.
(122949)

Edited file not Visible in Organizer

PS10. when using the organizer I clicked on full edit saved the file. The file is no longer visible in the organizer. File icon shows a broken file. It is visible with other prgms. I can see the edited file say in Win explorer etc.

Hi,
When you are saving make the file make sure that one of the options are checked:
Include in the Elements oraginzer.
Save in version set with original
As a copy
If the first option is not checked then it will not be included in EO.

Sharing files between Macs: some files not visible

I've had a PowerBook G4 for a few years now, just recently got a new MacBook Pro (very cool machine!).
Don't want to use Migration Assistant as the versions of Mac OS X are so different, also have had a problem with corrupted iPhoto database. I just want to copy over my iTunes database so I can sync my iPod, also some general private files.
I tried to mount the old mac to the new mac using Firewire, also tried sharing via AFP. That works, I see an icon for the old mac appearing on the desktop of the new mac. But not all the files on the old mac are visible. In particular, I don't see any of the folders under the Music folder when I look at it mounted on the new mac; from the old mac, I can see there are iTunes and GarageBand folders under Music. These subfolders just don't show up when I look at the old mac's mount on the new mac.
"Personal File Sharing" is enabled under Sharing/Services, and it's allowed under Sharing/Firewall. I tried setting protections from Terminal to allow "group" and "other" read and execute permission, didn't help.
Anyone else had this problem? What do you think is wrong?
PowerBook G4 version 10.4.11
MacBook Pro version 10.6.2

OK, found the problem. I opened the icon for the mounted disk, and tried to click on the user folder in the side bar, but that led me to the user folder on my New computer. To get to the User folder on the old computer, I had to start in the "Macintosh HD" folder there and then drill down through the "Users" folder.

Downloaded MP3 files not visible in playlist. I can find them by going through my desktop Start button and typing in the name of the file and clicking on it, then iTunes opens and plays it but I still can't see it in the playlist.

I have downloaded several files from a radio stations archives. They download as MPEG Audio Layer 3 files. When I go to the playlist that they are supposedly in I can not see them. But if I click Start on my desktop and type in the file names then iTunes opens and takes me to the playlist (where you see no list) and begins playing. Any idea how I can get the list to show?

I have downloaded several files from a radio stations archives. They download as MPEG Audio Layer 3 files. When I go to the playlist that they are supposedly in I can not see them. But if I click Start on my desktop and type in the file names then iTunes opens and takes me to the playlist (where you see no list) and begins playing. Any idea how I can get the list to show?

Emailed EPS files not visible

A friend of mine has been emailing me eps files from the Mail program on the MAC but I cannot see them as attachments in the email in Outlook or in my webmail. They seem to be coming across as images in line with the text rather than as attachments. Other image types are also appearing inline with the text rather than as attachments but I can see jpeg's, then copy them to my harddrive. The images only appear as normal attachments when another file type is attached also, like a pdf. Is there anyway to make images always attach normally?

They seem to be coming across as images in line with the text rather than as attachments.
If this person is using Photoshop for Windows, the problem may be how they're saving the EPS files. The default encoding for EPS (why, I don't know) is ASCII. In other words, as a text description of the data. Have her change the encoding to Binary. That choice comes up when you're either initially saving the file, or do a Save As. Once selected, it will stay on Binary for all future saves.
But not on those already saved encoded as ASCII, depending on what she does. If she does some minor corrections and just presses Command+S to save the changes, it will be saved in the same manner it was opened as. In order to change any standing files to Binary encoding, she's have to open the file and do a Save As, overwriting the current file.

Video files not visible in Finder

I have just finished transferring all my files to a new iMac with Mavericks 10.9.1. I have been editing video for years with various editing suites, on an Intel Mac. OS 10.6
On my new iMac the only files shown in Finder are just the packages "AVCHD" which are not usable by Adobe or Final Cut X. They need the *.mts files which are contained in that package.
I appreciate that I can see the *.mts files by using the command "show package contents", but this does not last, and when another folder is opened the problem is just the same. Surely there mus be something I am missing? There must be some way of permanently displaying the *.mts files so that the video editing prog. can find them?
A search in Finder for all *.mts files displays them openly, bu when you look at the hierarchy they do not exist. Weird.
And don't get me started on the hidden Library files, which are also essential. I have sorted that out!

You can move Projects and Events to and external drive, but you must move them from within iMovie. If you move them using the Finder, it will make the projects unusable.
I would recommend that you move all projects and events back to your original drive.
Then open iMovie and verify that all is well.
Now, click View/Events by Disk, and you should see your new drive in the Events List on the left.
To move an event, hold the command key while dragging the icon for the event to the icon for the disk in the iMovie Event List.
To move a project, hold down the command key while dragging the Project icon to the icon for the new drive in the Project List.
Doing it this way will preserve the links between your Projects and your Events.

Swf file not visible in Safari

I embedded a swf file in a DW for Mac page (CS3) ; created in
Flash, not DW -- and it works fine in FF but not in Safari;
although other's I created the same way for this same site are
working; i"m sure this is something simple
here's the page:
http://www.ruthinstitute.orG
ANY HELP MOST APPRECIATED........

Wait, i clicked the site link in the post to make sure it was
correct and now the swf file's working; must be a cacheing
thing.....or a poltergiest...
sorry...but thanks...
tbfa

HD files not visible

Similar Messages

Maybe you are looking for