HD Footage changing to 3X4 Aspect Ratio?

I am somewhat new to final cut. We shot last weekend full 1080 video. When start my project I dropped a 1080 clip into the time line, as default Final Cut asked if I would like to set up my project with the settings from the 1st clip that I dropped in.
I allowed it to do so and now a few days into editing I noticed that it is now in a 3:4 aspect ratio as opposed to the 16:9 that it should be in. I also believe that it it nos standard def.
Is there any way to bring it back to the full 1080 aspect ratio and quality? Or do I have to drop the clips into another timeline to fix it?
We shot on Cannon 5dMKIIs 24p so if anyone knows any tricks or preferred settings for that please advise.

Hi -
Other than the problem that you are attempting to edit in a non- editing codec ( which also explains your lengthy render ), why are you saying that the image has switched to a 3:4 aspect ratio? It is not filling the 16:9 frame?
You need to convert your source material from H.264 to Pro Res and then edit in Pro Res. This is discussed daily, if not more often, on these forums. H.264 is an acquisition and delivery codec, it is not intended to be used as an editing codec.
A simple way to do that is to use Magic Bullet Grinder to ingest and convert the source clips your camera has shot. There are many other ways to do the same.
http://www.redgiantsoftware.com/products/all/magic-bullet-grinder/
MtD

Similar Messages

In Premiere Pro, is it possible to change the project aspect ratio once started?

In Premiere Pro, is it possible to change the project aspect ratio once started?

On a side note, 'projects' do not have as aspect ratio, sequences and footage do. And a project can contain any number of sequences or footage.

How to properly import footage with a different aspect ratio?

My main composition has the following specs:
Dimensions: 1280x720
Pixel Aspect Ratio: Square Pixels
Frame Rate: 29.97
The footage I'm trying to import has these specs:
Dimensions: 720x576
Pixel Aspect Ratio: D1/DV PAL (1.09)
Frame Rate: 25
Right now, when I place the footage in the comp, the edges are fairly jagged. I assume there's some weird pixel aspect ratio thing that's going on, but just not sure how to get it right.

You have more than the aspect ratio problem going on. There is a frame rate mismatch. There is a very big problem of scale as well.
You can't expect to have as sharp an image as the original if you scale the layer to fit inside the comp side-to-side. There is a third-party plugin called Instant HD from Red Giant software that can HELP -- it won't CURE the problem of too few pixels.
You also need to change the frame rate of the footage to 29.97. AE's Time Warp can help with that. If your need to have an extremely good-looking frame rate conversion is critical, you'd again have to get third-party frame rate conversion software like Magic Bullet or Twixtor.

Sequence Settings while using HD footage in 4:3 Aspect Ratio

Maybe this is a silly question but I'm still a little confused when it comes to aspect ratios and sequence settings. I'm in FCP 7 and I want to edit HD footage in a 4:3 aspect ratio.
What should my sequence settings be if I don't want to have to continually render? Or is that even possible?

Tom said the magic words: edited sequence.
For ease of editing, cut your show in its native format, THEN drop into anSD sequence.
i've got a corporate client who does this all the time. But it only allows them to be very sloppy in their shooting, because they can always reframe stuff at this stage. you should see some of that stuff!

Can fcp 5.4 use HD 1920 x 1080 footage in its proper aspect ratio?

I just got a Cannon Mark II 5D and am using fcp 5.4 to edit video.
I am not using capture and log... just dragging it in to the project bin. None of my project settings are 1920 x 1080. How do I set my aspect ratio properly?
And... to throw a kink in the mix. I did not realize this right away. I've been editing for a while. But, I'm set at a different aspect ratio. Can I change this midstream?
Thanks for you help.

Try the Final Cut Studio forum.

Need help changing size and aspect ratio for 500+ images

Thank you for reading this! I have about 500 images of people in different poses. They're all extracted on a transparency as PNGs. They vary in aspect ratio, dimensions and position of the person within the frame - for some the feet are very close to the bottom of the frame and for some, they're higher up. I need to equalize all 3 of these qualities, so that if superimposed, they look like a video unfolding with the same zoom. My ideal size would be 800x800 at 300ppi.
Is there a way to batch even a part of the process and keep the png format? I had the images in PSD initially but they were too massive so creating catalogs with them was prohibitive.
If not possible to do a batch, what would be the best (easiest) and fastest way to do it? I'm thinking that maybe creating some template where an oval shape the size of the head can help create consistency of the size of the person and a line that helps set up the distance from the bottom?
I so appreciate any help you have to offer. Part of my problem is that I don't know what these processes are called so I don't even know what to search for. If you can even name the actions that I need, it would be of great help. I already paid a designer to do the extraction and they were supposed to do this formatting as well and they didn't so my budget is shot. I'm hoping that if I understand what the steps are, I can do them myself.
Thank you!

If you download my crafting actions package you can record an action that uses one of my plug-in scripts to do that process. You could then batch that action and process your 500 png image files.
Crafting Actions Package UPDATED Aug 10, 2014 Added Conditional Action steps to Action Palette Tips.
Contains
Action Actions Palette Tips.txt
Action Creation Guidelines.txt
Action Dealing with Image Size.txt
Action Enhanced via Scripted Photoshop Functions.txt
CraftedActions.atn Sample Action set includes an example Watermarking action
Sample Actions.txt Photoshop CraftedActions set saved as a text file.
More then a dozen Scripts for use in actions
Example
Download
Step 1 Select layers transparency
Step 2 Copy
Step 3 Paste
Step 4 Select all
Step 5 Align Layer s to selection vertical center
Step 6 Align Layer s to selection horizontal center
Step 7 Select bottom Layer
Step 8 delete current layer
Ste9 9 Fille>Automate>AspectRatopSelection... In the dialog set 1 1 ratio center rectangle replace selection feather 0
Step 10 Image Crop
Step 11 File Automate>Fit Image. In dialog enter width and height 800
Step 12 Image size in the dialog uncheck Resample and enter 300 in the resolution field.
I'm sure the should work you mane not need the copy paste and it depends on how Photoshop treats the PNG layer the canvas size or just the pixels.
This may also work
Step 1 Select all
Step 2 Align Layer s to selection vertical center
Step 3 Align Layer s to selection horizontal center
Ste9 4 Fille>Automate>AspectRatopSelection... In the dialog set 1 1 ratio center rectangle replace selection feather 0
Step 5 Image Crop
Step 6 File Automate>Fit Image. In dialog enter width and height 800
Step 7 Image size in the dialog uncheck Resample and enter 300 in the resolution field.

How do I change a pixel aspect ratio from HD 1920x1080 frame rate 25 to NTSC 640x480 frame rate 29.97

I upload files to a tv channel, but for them to air, they need to have a NTSC 640x480 pixel aspect ratio with a frame rate of 29.97. I currently have a .mov file HD 1920x180 frame rate 25. I deleted the original unedited files so all I have is the .mov file. I need to make my file NTSC 640x408 frame rate 29.97
Thanks please answer ASAP

If you aren't entirely happy with the image quality you get from this in FCP. consider buying Compressor ($49). Down-converting from HD to SD often introduces artifacts. Compressor has a resize filter that does a good job of minimizing those artifacts.
Russ

How can I import .mov footage with original pixel aspect ratio?

So the footage is 720x480 Square Pixels (1.0), 29.97 fps, progressive .mov but when I import it into Premiere Pro, they come up compressed as D1/DV NTSC (0.9091) automatically. When I try to Interpret Footage, it simply adds black bars. Why can't it just import correctly? When I preview the original footage, it plays back correctly but the preview inside Premiere Pro shows the distorted version... Please and thank you!!!

The suggestion about "new item" above was short. Here's the "full" version. In the Project Panel, go to the lower right corner ... click on the "New Item" Icon ... as shown here:
The first item on the pop-up menu that will appear should be "Sequence" ... click on it and just say ok at the next screen without even reading it. It's irrelevant, really.
Then going back to your project panel (we assume you've already imported your footage into it) click & drag a clip from the proj. panel to the timeline, or move one from the "Source monitor" to the timeline ... you should get a pop-up asking if you want the timeline changed to your footage, or your footage changed to the timeline. Take the timeline/sequence settings changed to match footage, and go.
That SHOULD take care of the problem in the vast majority of cases. It is such a simple fix, and so often the easiest and "correctist", that it's worth a try. Navigating the choices of setting up sequences is best left for those people who say, study GPU algorithms for a couple hours before going to bed for the sheer exhilaration of it ... unless, of course, PrPro actuall does a face-plant with your footage. But it mostly works good at it ... once you just let it ... so you might give that a try, takes what ... 20 seconds to see if it works?
neil

Media Encoder Greater that 7.0 does not recongnise SD footage with correct pixel aspect ratio

Hello,
I logged this bug with Adobe last year but even through the latest releases the bug still remains and is a real issue for anyone editing in SD via Premiere Pro CC.
Effectvely when you create a PAL sequence within Premiere Pro CC using SD 720x576 pixels (4:3) you have 2 options to export, either Queue or Export. If you export the footage directly from the PP application to MPEG2 SD then the resulting files are perfect, however if you use the queue option and send it to Media Encoder then the resulting files are incorrectly interpreted and the resulting file looks squashed. I suspect the Media Encoder is defaulting to Square pixels and not 1.09xx which is the default for PAL SD 4:3
The issue only started on Media Encoder version 7.1 but I also checked 7.2 and this still has the bug.
I can't believe this is not effecting a lot of people and its taking so long to resolve. Adobe at the time acknowledged the issue but did not provide a time scale to fix.
If anyone has any words of wisdom I would love to hear from you. Maybe I am missing a simple workaround ?? Which could be to just export and NOT queue, however because I use the batch function a lot this is not always viable.
thanks
Steve

Hi Tom,
thanks for the quick response. I'll attach two screenshots -- one from PP and one from AME, both showing the same test chart, but distorted in AME.
Basically the given parameters are:
Sequence is D1/DV PAL, 720x576, PAR 1.0940, framerate 25
Export settings are: MXF OP1a, resolution + framerate same as sequence, IMX 50 PAL.
If you still require the preset file, I'll send that separately.
all the best
Daniel

Using "One Step DVD from Movie" on my IMac 10.8.6 using Verbatim DVD-R ("Life Series") 4.7 GB 16X 120, I get a wide angle version of my two minute story rather than the 3X4 standard aspect ratio that I normally get and want. Help!

While using "One Step DVD from Movie" using DVD-R Verbatim ("Life Series" 4.7 16 X 120 min) on my IMac 10.6.8 I get a wide angle aspect ratio on the DVD not the standard 3X4 aspect ratio. The Quicktime Movie is is standard 3X4 aspect ratio and the video video footage is standard 3X4 aspect ratio? Advice will be greatly appreciated.

Try this basic troubleshooting fix :
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iDVD folder.
Click to view full size
3 - reboot.
4 - launch IDVD and try again.
Personally I would not the the one step method but create the iDVD project from scratch so you can make sure the widescreen option is not selected in the preferences and you can follow this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Change Pixel Aspect Ratio Once Already Started?

I've been having trouble with my video looking extremely blurry -- I thought it had to do with rendering but it looks the same rendered as it did before rendering. I think I figured out that it has to do with the pixel aspect ratio being too small (or is it frame size, or are those the same thing? It's all very confusing for me!). The final output for this video is YouTube, but it also looks blurry within Premiere (mainly when stretching the Program Monitor so I can see it larger).
I helped on a video a few months ago that looked perfect, everything was really crisp in Premiere (after rendering, that is) and when exported to YT. The pixel aspect ratio was 1920x1080 for this video, and the one I'm working on now is 720x480.
So, can I enhance the pixel aspect ratio of the video I'm working on now? If I'm not able to change the pixel aspect ratio once I've started the project, what would be your advice going forward?
Thanks, and please let me know if you need any more information!

You need to be sure your sequence setting matches
the frame size and aspect ratio of your source media.
To create a sequence that matches your footage, try this:
Once you have created a properly configured sequence,
you can copy (Ctrl+C) then paste (Ctrl+V) your already edited
clips into the newly created sequence.
Also:
Changing a Sequence to Match a Clip
http://www.video2brain.com/en/lessons/changing-a-sequence-to-match-a-clip
Create a sequence
http://help.adobe.com/en_US/premierepro/cs/using/WS3E67AF4C-B2A2-4f04-90B4-F8CCFB74B144.ht ml#WSd79b3ca3b623cac941d41a681247d1f35a4-7fff
What's the best export format or codec?
http://www.video2brain.com/en/lessons/whats-the-best-export-format-or-codec

Aspect Ratio change in Adobe Premiere Pro

Hello all, I am completely new to APP editing so this might seem like a very obvious question. My source footage is in 16:9 and it seems like the timeline image is in 4:3 and therefore a part of the image is cut off. I changed the Pixel Aspect Ratio in Sequence Settings to 16:9 but the image is still cut off in the Program window. I am working on a Macbook Pro and have APR CC 2014. Thank you in advance for you help!

Hello Richard, thank you for your response. I just tried that, changing the Pixel Aspect Ratio in Sequence Settings to 16:9. The screen size changed but the image itself is still cropped. Is there something else I need to modify in the Settings window of the new sequence in order to have the image fit the screen? Thank you so much!

The (new) Premiere pixel aspect ratio is wrong for my PAL DV cam footage

I've had a Sony TRV-950E DV-cam since 2003. I've been shooting DV PAL in widescreen.
I just bought Elements 12 to edit my footage, and discovered that the pixel aspect ratio for D1/DV PAL Widescreen has been updated to 1.46 (old value 1.42).
The theory behind this change is that video recorded on 720x576 is slightly wider than 16:9 and that the 16:9 portion is 704x576.
Unfortunately this is not correct for my footage! I've captured the video from my DV-cam (by firewire) and opened it in Premere and it is streched to be shown as 1050x576.
So I did a test:
I filmed a steady shot of a perfect circle and captured the video from the camera and opened it in Premiere. The pixel ascpect ratio 1.46 makes the display 1050x576.
The question is: Am I seeing this displayed as a perfect circle now?
This can be tested:
I make a picture of a perfect circle in Photoshop (square pixels) with size 1024x576. I imported this picture into the Premiere project, and match the two circles: The filmed one, and the Photoshop one.
They DO NOT match! The one on the video is slightly stretched in width.
So then I stretch the Photoshop picture in width to become 1050x576. I then import this picture into the project. And now I have a perfect match between the circles!
This means that my DV camera actually records a 100% 16:9 picture on all the pixels 720x576 - and not a slightly wider picture with the 16:9 part being in 704x576 (which is the reason for the change in pixel aspect ratio from 1.42 to 1.46).
I have some HD scenes that I want to import (and downscale) into my SD project also, and I also have a lot of still pictures.
Unless I can change the setup i Elements to the correct ratio 1.42, these stills and sqare-pixel-video (HD) should ideally be streched from 1024x576 to 1050x576 to match (become equally stretched as) all the SD footage.
How do I solve this?
I just bought Elements 12 three days ago.
(I just tried opening the captured video in Windows Movie Maker - and that program must use pixel aspect ratio 1.42 since the video is diplayed correctly as 1024x576 with a perfect circle)
Regards,
Tom from Norway

Tom
After much thought and exploration and experimentation, I have come to the conclusion that there is no practical purpose for doing anything other than importing your media into the project and editing/exporting. I find no distortion in doing so, be it in the video samples that you posted or in still models that I created for the pixel aspect ratio 1.422 vs 1.4587 for D1/DV PAL Widescreen.
If you have not already, please read the following about the Adobe DV Widescreen Pixel Aspect Ratio change from 1.422 to 1.456.
Please start in the first link which gives some get subsequent links in it
http://forums.adobe.com/thread/673877
http://www.mikeafford.com/blog/2009/03/pal-d1-dv-widescreen-square-pixel-settings-in-after -effects-cs4-vs-cs3/
Also, you may find the following article on square and non square pixels of interest. It uses the PAL DV Widescreen 1.422 pixel aspect ratio in its discussion.
http://library.creativecow.net/articles/gerard_rick/pixel_madness.php
Aside from the explanation for the rights and wrongs of the matter, this is what I actually observed taking your PAL DV AVI Widescreen and PAL MPEG2.mpg Widescreen into the same Premiere Elements 12 Windows PAL DV Widescreen project. Along with your video files were still images that I created in Photoshop Elements 11 Full Editor:
1024 x 576 document with a red circle on Layer 2 of the Layers Palette
1050 x 576 document with a red circle on Layer 1 of the Layers Palette.
The red circles were superimposed in creation. The difference in the pixel dimensions between the two are evidenced by Layer 1 content peaking through on the left and right.
The gpsot readout for pixel aspect ratio for each of the videos was
a. Your PAL DV AVI 720 x 576 Widescreen = 1.422
b. Your PAL MPEG2.mpg 720 x 576 Widescreen = 1.422
Each of the Photoshop Elements documents (circles) saved as .psd files 1050 x 576 pixels.
When all were taken into Premiere Elements 12 project manually set for PAL DV Widescreen, they looked like the following, no display of distortion.......
PAL DV AVI Widescreen 720 x 576 (now the pixel aspect ratio in Premiere Elements Properties was shown as 1.4587, not the 1.422 seen in gspot before import)
PAL MPEG2.mpg Widescreen 720 x 576 (now the pixel aspect ratio in Premiere Elements 12 Properties was shown as 1.4587, not the 1.422 seen in gspot before import)
Edit Menu/Preferences/General with check mark next to "Default Scale to Frame Size" was in effect.
As for the red circles stills (1050 x 576 to equate to the square pixel version of 720 x 576 widescreen) did not distort when brought into the Premiere Elements 12 Edit area monitor which is established by the PAL DV Widescreen project preset with the pixel aspect ratio = 1.4587.
The jpg version of the Photoshop Elements document (.psd) 1050 x 576 pixels (square pixels) looked like:
And, when this Timeline was exported Publish+Share/Computer/AVI with the DV PAL Widescreen preset, there was no distortion in the export. It looked undistorted as it did before export.
So, unless I am overlooking a key point here, I cannot see a reason why you cannot use the video sources that you presented for sampling as weil as stills with the 1050 x 576 pixel dimensions.
The only time I see any distortion possibilities is if you use a player that does not recognize the 16:9 flag that stretches the 720 x 576 to 1050 x 576 for display after encoding.
Trying to convert Premiere Elements 12 which uses the 1.4587 pixel aspect ratio for PAL DV Widescreen into a Premiere Elements 7 which uses the 1.422 pixel aspect ratio for PAL DV Widescreen is up hill in spite of creative thinking on your side.
Please review and let me know if you are seeing another different from what I am reporting with the samples that you posted.
Thank you.
ATR

Photoshop Elements 5.0 - won't let me change image aspect ratio. Box is greyed out. Have reinstalled

I've been using Photoshop Elements 5.0 for years. As of today, it won't let me change image aspect ratio. Box is greyed out. Have reinstalled the program with no change

Where in photoshop elements 5 are you seeing the "Box" geyed out?
Or how are you trying to change the image aspect ratio?

Monitor: in CS2 how do I handle 4:3 to 16:9 aspect ratio change?

Hi, my first post here, so please be kind.
I have used Photoshop 9 successfully for several years using a conventional 4:3 aspect ratio CRT monitor. I have just upgraded to a flat screen monitor which has a native resolution of 1920 x 1080pixels with a 16:9 aspect ratio.
I resized the Photoshop window to fill the new screen but transferring photographs from Adobe Bridge they were stretched horizontally.
This is the first time I have ever changed the format of my monitor and feel that somewhere in Photoshop there must be a feature which accommodates such a change; though I have spent serious time looking.
I can get the image to display properly by changing the Pixel aspect ratio, but I am certain that would result in saving a distorted image.
Please what do I need to do?
Gordon

You're in luck, there's a pretty easy solution for this:
You must change your Windows desktop resolution to exactly match the "native" resolution of the new monitor, which is 1920 x 1080 in this case.
Usually you will be offered that choice automatically, but in some cases you'll need to "install" from a CD or downloaded information about the monitor.
There may also be some on-monitor controls you'll need to review to ensure it's showing the full 1920 pixels in width.
What version of Windows are you running, and what model of monitor is it, specifically?
-Noel

HD Footage changing to 3X4 Aspect Ratio?

Similar Messages

Maybe you are looking for