HD footage looks jagged after compressing to burn the DVD

I finished the project in HD, I used compressor default settings for 90min hi quality to created 2mv files for DVD burning in SD. After burning the DVD I see a lot of jagged age effect especially where are lines, (eye brows, paper documents, etc). I used to shoot in SD, dvcam, and it was perfect.
Is there a solution...?
Thanks.

Thank you very much!!! I tried 30 sec, and what a difference. The faces are sharper, the jagged edges are smaller. I had the jagged edges even on the face before. I still have some left maybe about 20%. I wonder if anti aliasing (what should be setting value?) or details would help, but I am afraid that it would take 100 hours to process 15 minutes of footage. I might be wrong, because it did show me 100 hours before.
Thanks again.

Similar Messages

Hello, I am have problems with coruption of the photos in a slide show after burning the DVD in iDVD. This coruption does not always appear when you preview the project. I have slowed down the burn rate to 1X and kept the quality to professional.

I am having a great deal of problems with Data coruption in slide shows after I have burned a DVD in iDVD. I have changed burn rate from best to 1X with no difference in the coruption. I have the quality set to professional with no improvement. The size of the project is near 3.95, so it should fit on a single layer burn. Should I use either iMovie to create the slide show or "Photo to Movie"? Also, can anyone comment on how I preserve the highest quality picture resolution with a slide show? If I do use iMovie or Photo to Movie, the file size should exceed the 4.2 size so, will I have to buy new DVD's which are capable to handle the double layer burn and upto 8 GB? What DVD's are recommended? Any preferred brand? Are there problems with burning with double layer? I read on this blog of numerous problems.

DVDs are LOW resolution by today's standards - only about 0.3 megapixels - so there is no way they your images on a TV set will look "High Definition". See Preparing images for iDVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6675.html for recommendations on image sizes to use. Using larger images won't give you better quality, andf in some cases, will lower you image quality because the Quicktime resizing that occurs isn't the best.

When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

Hi
Try in iDVD
• Save as a DiskImage
• Play this by use of DVD-player tool
Still OK or problems ?
If OK - Burn it by use of
• Apple Disk Util tool - or -
• Roxio Toast™ (if You got this - I love it)
Yours Bengt W

HT1583 When burning a DVD of photos and music from iDVD, the photos blur right before the transitions and the music has about 5 second glitches here and there before the music starts again. Is there any way to burn the DVD without this happening?

Each year I am in charge of making a slideshow of photos and music for my annual company meeting. I always use iDVD to set up my photos and music and then burn the DVD to play at the meeting. Every time I burn the DVD, it blurs right before the transition of the photo. It has always done this and I'm not sure why. It will also make the music glitch in a few spots for about 5 seconds or more. If I burn another DVD to try it again, the glitches will still be there, but in different spots. I've tried the highest quality of DVD's possible and this still happens. What can I do to fix this problem?

Try disabling transitions altogether!
There is a technical reason that this breakup happens - it is to do with how slideshows can be saved within the DVD specification, they can either be recorded as 'video streams' or as a collection of 'still images'.
When you add transitions iDVD has no option but to use a video stream, this can result in terrible 'breakup' because the mpeg 2 encoder isn't designed to handle scenes that are static with a sudden short change. You can see 'artefacts' in the video stream…
https://en.wikipedia.org/wiki/Compression_artifact
'Still image slideshows' avoid the issue altogether by only showing a static image, no video compression is used & because the scene doesn't transition so it shouldn't breakup.
NOTE: Music on the slideshow is irrelevant, both types can use a soundtrack.
I cannot remember if it is possible to force iDVD to only make still image slideshows, I always use DVD Studio Pro to correctly setup DVD's. I'd suggest you use the option to save the DVD to a disk image & then open that disk image so that DVD Player can preview it, that should save on the number of test disks you burn.
If you cannot make it avoid using video streams you may be ether off making your own video slideshow in iMovie & then import that into iDVD. It may eventually look better despite being a video stream!
iDVD isn't really condusive to professional levels of control.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

Hi,
first, sorry if my english sucks jajaa i speach spanish, havent practice my english for a while.
first i edited my video in premier cc
sequence 1280X720, 59,94 fps
48000hz - stereo
the i linked it with dynamik link to after, make some color correction, etc etc etc
i renderd in quicktime animation
my video looks fine in my computer, but when i send my .mov video to encore (cs6) in a HD MENU and standard menú, the image sucks.
i have done the transcoding in encore, but i doesnt work either. i dont know what else to do.

SOS: guides on DVD export settings to burning the DVD.

I need help. Returning to PP after abt 5 yrs on FCP. Lots have changed and need help on best export format for DVD from source video/auio: 1280/720 16:9 60fps progressive square pixels 48 sample. I encoded MPEG2 DVD which only showed 720/480 but the output was pixelated Not good. Please, give steps to encode and burn the DVD. Thanx.

PPro FAQ List http://forums.adobe.com/community/premiere/faq_list has an export article... and lots of other information
Here Tutorials
http://forums.adobe.com/thread/913334
http://forums.adobe.com/thread/845731?tstart=0
-and http://forums.adobe.com/message/3234794
Encore http://tv.adobe.com/show/learn-encore-cs4/
A "crash course" http://forums.adobe.com/thread/761834?tstart=0
A Video Primer for Premiere http://forums.adobe.com/thread/498251?tstart=0
Premiere Tutorials http://forums.adobe.com/thread/424009
CS5 Premiere Pro Tutorials http://forums.adobe.com/message/2738611
And http://blogs.adobe.com/premiereprotraining/2010/06/video_tutorials_didacticiels_t.html
And http://blogs.adobe.com/premiereprotraining/2010/06/how_to_search_for_premiere_pro.html
CS5 Tutorials http://bellunevideo.com/tutlist.php
PPro Wiki http://premierepro.wikia.com/wiki/Adobe_Premiere_Pro_Wiki
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
Premiere Pro Wiki http://premierepro.wikia.com/wiki/Main_Page
Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668-A12E-4ED0348C3FDBa.h tml
And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-263E77B445B9.ht ml
Color correction http://forums.adobe.com/thread/892861?tstart=0
Photo Scaling for Video http://forums.adobe.com/thread/450798?tstart=0
-Too Large = Crash http://forums.adobe.com/thread/879967?tstart=0
After Effects Tutorials http://www.videocopilot.net/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/
Surround Sound http://forums.adobe.com/thread/517372

I have created a movie in 16:9 format. I have created an iDVD pane in 16:9 but when I preview the movie that pane changes to 4:3 and burns the DVD as a 4:3 movie. How can I stop that, please I am in Snow Leopard, using FCE4.0.1?

I am using Snow Leopard and have created a movie in 16:9 format (SD not HDV) I created a movie which stays in the 16:9 format in fcp file, .mov fiule and MP4 file. I created an iDVD pane in 16:9 but when I play the movie in the iDVD preview window the iDVD pane switches to 4:3 and it burns the DVD in 4:3. How can I stop this so I get a16:9 DVD. Thanks for any help offered
James Bowman

Hi
As I see this I see two parts
• Howto go from FinalCut to iDVD
• Howto set iDVD right
In FinalCut Express (to 4) or Pro (to 6 - most probably 7 too)
• One has to set Anamorphic in the Browser window - menu columns
• Export as QuickTime movie .mov - NO QUICKTIME CONVERSION
In iDVD there are TWO places to set - WideScreen
- Start a NEW iDVD project - AND HERE SELECT WideScreen 16:9
- in Project - select Projectinfo
- now set WideScreen 16:9 - Here too
This use to work for me.
FOR FinalCut Pro-X - I have not a Clue - as I don't use it. SORRY
BTW - There is a good practice to before BURNING the DVD do
• Save as a DiskImage
• Test this by using DVD-Player tool
And if it is OK Size and All - then burn it by using
• Disk Util tool
• here set down burn speed to x4 or less (less burn errors = plays on more devices and better)
• Not using Memorex or NoName etc cheap media - as they usually DO NOT WORK as Video-DVDs
• I use Verbatim DVD-R as they play on more and even older DVD-players
Yours Bengt W

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?
Thanks, Scott

Hi
This Q is close to - Something is wrong. What's it ?
You have to supply much more info to be able to start guessing.
• What material was used ? Video codec, Audio file format and Photo file format
• Free space on Start-Up hard disk. How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Burn speed set down or not ?
• Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
And all extra info You can supply - that set's us on track.
Yours wanting to be of help. Bengt W

I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1. Thanks for any input.

Anyone provide accurate info on why after 1 yr, after guarantee period expiry the DVD player on our I mac running Intel core duo processor with OS 10.6.8 refuses to run DVDs? CDs run

Can anyone provide accurate info on why after 1 yr, ( just after guarantee period expiry) the DVD player on our I mac running Intel core duo processor with OS 10.6.8 refuses to run DVDs?
CDs run without problem and until recently the DVD we have (all original no pirated copies) ran; we have used a CD cleaner disc to no avail.

Welcome to the Apple boards:
I suggest an erase and install and use your backup for any important files you have.
Did you perform a disk check/repair and permissions repair and a PRAM zap before updating? While not required, they are usually necessary to avoid issues.
There are so many reasons for a bad install, that it is impossible to list them all.
Out-of-date software, drivers, etc, haxies, and other software can cause problems.
My three updates were without incident, so it is possible for a perfect update, but unless you supply us with details about your previous system, programs, apps, drivers, etc., it is not possible to figure out what happened.
Again, whenever installing an update to an OS, a clone or other full backup is absolutely necessary, as reading the posts on this board indicate.

IT DOES NOT LEAVE ME TO BURN THE DVD WITH SUBTITLES

Hello ... my problem is:
I have 3 different subtitles, in English, French and Portuguese, but to the moment to burn the dvd a mistake happens: "Language codes for 'English' and 'English-2' must differ
Since I can do to solve it. Thank you

hmmm, thought I posted an response to this a while ago. Anyway, that was on the iphone.
But here now...
it sounds like you have two subtitle tracks marked as English. There are small codes to the left of each subtitle track. Simply make sure that they are all different: EN English, ES Espanole, PT Portuguese.
http://dl.dropbox.com/u/129533/subtitle_codes.png
http://dl.dropbox.com/u/129533/selectsubtitlelanguage.png

HT1089 how to proceed to burn the dvd

how to proceed to burn the dvd?

What DVD? Do you have an iDVD project you want to burn? If not what do you want to burn to a DVD disk? What are you trying to accomplish. We can't help unless you give us details.
OT

GH3 footage looks horrible after import to FCPX

I have mov files from my Panasonic GH3 on my hard drive. After importing them to FCPX footage looks horrible, it's falling apart. If I open it in quicktime is fine. What am I doing wrong?

What uis this image supposed to show? How are you importing media into the application? What are the media specs? Open in the QT player and report on the movie inspector.

Why does my progressive footage look interlaced after export?

I've searched all the discussions on this topic and my issue seems to be very paticular...
I have imported AVCHD 1080p footage (29.97fps and 1.3333pas) into Premiere Pro CS4 Version 4.2.1. I placed this footage into a AVCHD 1080p anamorphic, 29.97fps, 1.333pas, progressive scan sequence. I exported the sequence out with a H.264 codec, 1440x1080p HQ preset and changed the frame rate to 29.97 and the field order says None (Progressive) and my footage when screened on the computer in a Media Player looks interlaced eventhough the raw footage does not look interlaced at all. I even interpreted the footage for all the clips used in the sequence to conform to No Fields (Progressive Scan) Field Order.
Did I leave something out? What am I doing wrong?
I will say that one clip in the sequence was edited in AE and rendered our as a .MOV with a PNG compression type and it does not look interlaced in the final export from Premiere Pro.

So I figured what the problem was...here at my job the manual that was available for the sony handycam was from an older model. I did not know this. I looked up the actual manual online and it specifies that the recording mode I've been using to capture (HQ HD) is actually shooting AVCHD 1080/60i...so my original footage is really interlaced. Here's where I had my "Ah Ha" moment. I'm currently switching to an iMac from PC and when I viewed the raw footage on a PC in the Media Player, it looked progressive. BUT, when I just played back the raw footage on my Mac, it looked interlaced so I knew something was wrong.
OK! so here I am trying to make 1080/60i footage look like 1080/30p this should be fairly easy correct?
(also, thank you Jim for affirming that my process is in fact correct IF I was using said progressive raw footage which made me question the project at it's beginnings)

Text and graphics from Motion look (lacey) after compression??

I have switched from DV to HDV.
I have always made my dvd menu's in Motion, and when making them for DV format they looked good.
Everything looks good until I compressed it to MPEG 2 for the dvd.
The text look (liney) or like they need de-interlaced.
Any suggestions?

I noticed that too' .. although my draft-1, text is de-interlaced. I experimented with Live-fonts, some work better than others .. An Example, Intro-text is smooth, but following is different font: http://www.ireport.com/docs/DOC-321851 .. better on YouTubeHD: http://www.youtube.com/watch?v=9WynkWhC8u8

HD footage looks jagged after compressing to burn the DVD

Similar Messages

Maybe you are looking for