HD for Apple Devices (10 Mbps) not working

I use Compressor 4 to convert a bunch of videos...
Unfortunately the preset "HD for Apple Devices (10 Mbps)" is not working - result = "Failed"
but the setting HD for "Apple Devices (5 Mbps)" >is< working.
I have a Mac Pro 2010, 12-core 2.66 GHz with 32 GB RAM with an ATI Radeon HD 5870 1024 MB.
There should be no performance problem... but what's wrong? Any ideas how to change this?

I've found the problem... it depends on the file name. The file name was
Chill & Ride 2011 - slomo long v4.mov
I've changed the name to "slomo.mov" and it worked!
Strange...
The result: http://vimeo.com/34847568 ;-)

Similar Messages

Compressor 1080p for Apple Devices (10 Mbps) Does Not Include Dolby 5.1 Audio Track

Compressor recognised my file's audio properties as: AAC 5.1 (C L R Ls Rs LFE), 48.000 kHz
I use the 1080p for Apple Devices (10 Mbps) which should include Dobly 5.1 audio track
After the succesfful completion of any file the output file only includes a 2 channel audio track.

WIsh I could help and was hoping someone else would jump in with suggestions. The surround sound work I've done successfully is limited to the legacy versions of FCP and Compressor. When I've tested it in the FCPX to Compreessor workflow, I've not got it to work either.
I suggest you post your question in FCP X or Logic Pro forum to see whether you get some help.
Good luck.
Russ

HT4740 i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50

i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50
I dont know what else to do to be able to share my project - I know i updated FCPX before i shared this project but i dont know what im doing wrong

masterpieces wrote:
later moved the events and projects to the FCP events and projects folder .
Can you explain in detail what you did?
Do any other shsre destinations complete? If not, do you get the same error message?

Requesting a work DNS for apple devices

Just to the point : i cannot download any app / music from appstore / itunes using google dns ,
It keeps cannot download app.
If using my ISP dns it will not allow me to connect to internet on all apple device but on pc work.
Is there any dns for this problem?

Captive portal/wispr support for apple ios7
CSCuj18674
Description
Symptom:
When attempting to access the Guest Portal with an Apple iOS 7 device while the WLC "Captive Portal Bypass" feature is enabled, the web sheet on the device still appears, preventing the user from continuing the flow.
Conditions:
The Apple device is running Apple iOS 7.
Workaround:
In the ACL on the WLC used for captive portal redirection and exemption of special traffic for the Guest Portal, add exemptions for the IP resources that resolve from "www.appleiphonecell.com" and "captive.apple.com" FQDNs.
IMPORTANT NOTE: These IP addresses are associated with the FQDNs of "www.appleiphonecell.com" and "captive.apple.com" and are subject to change by the entities hosting those domains. If the IP addresses do change, the ACL would need to reflect that.

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?, USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ? Anyone can help me plz?

Hi, is this a question" Post?
or are you just offering an insight into your Mouse Issue?
Generally and at times we all have little idiosyncrasies appearing with the running of our Macs.
I use the same Logitech BT with my MBP. MB & iBook..(not at the same time) Only ever had one issue
and the cure was to completely Delete the mouse from BT -> Repair Permissions & Reboot then Re Install the BT mouse..Ihave just put a new set of batteries in the Logitech (only 2nd set ever)...L

HT201412 ipad not turning on.On charging apple logo appears in between.But its not turning on,tried to restore by pressing start & home button for 10 seconds.But its not working.

ipad not turning on.On charging apple logo appears in between.But its not turning on,tried to restore by pressing start & home button for 10 seconds.But its not working.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps. It also has stop work when trying to down load new Apps. Any suggestions out their???

For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps. Everything else seems to work. Any suggestions out their???

I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working. My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads. I have checked into my ITunes account and the ID and password are correct and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work. My problem seems to be just with trying to use my ID and password when wanting to download new books or apps. I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel. This message appears usually ten minutes after I have tried to make a purchase. At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen. Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

Waht is the email address to report a refund. I paid monthly subscription for Fring but it does not work and Fring support asked me to report this to Apple support.?

Waht is the email address to report a refund. I paid monthly subscription for Fring but it does not work and Fring support asked me to report this to Apple support? I'm not aable to report this issue to the right people??

For issues with an iTunes Store purchase, email:
http://apple.com/support/itunes/contact/

Apple automatically charged me for an iCloud upgrade on a device I do not own anymore or know of the current owner. Even though I deleted the device from my account I was still charged for a device I do not have anymore

Apple automatically charged me for an iCloud upgrade on a device I do not own anymore or know of the current owner. Even though I deleted the device from my account I was still charged for a device I do not have anymore. It's very difficult to get to talk to anyone from support. How can I be refunded?

Yes, assuming they are currently on the computer.
If the iPhone has been used as designed, contacts are either in a supported application on the computer or are synced to a cloud service.
Pictures would be copied to the comptuer regularly and then those desired to be on the device would be synced back.

Wireless setting for Apple devices

Hi All,
I would like to share your experiences on how to optimize your network for Apple devices. The use of Apple devices are far more common in the U.S. than it is in Denmark (Europe) where I am. We are getting there, but certainly still "lags" a little I think.
What is your experience with:
802.11k config wlan assisted-roaming. What is your experience is that good or bad?
- config wlan assisted-roaming neighbor-list enable [wlan-id]
- config assisted-roaming floor-bias [dBm] Ho wmany dBm?
- config wlan assisted-roaming dual-list enable [wlan-id]
802.11r (Fast roaming) have any done some teting here?
config wlan security ft enable [wlan-id]
config wlan security ft over-the-ds enable [wlan-id]
config wlan security wpa akm ft-psk enable [wlan-id]
config wlan security wpa akm ft-802.1X enable [wlan-id]
config wlan security ft [reassociation-timeouttimeout-in-seconds] [wlan-id]
config wlan security wpa akm ft over-the-ds enable [wlan-id]
Cisco recomend to use a WLAN for 802.11r clients and other WLAN for non 802.11r clients.
Propperly because a non 802.11r client will not be able to understand the respond from the AP. Right?
- Apple iOS earlier than 6.0 do not support FT.
- iPhone4s with iOS6 code and iPhone5 user 802.11k. What abouth the IPAD?
Another thing. What abouth WPAII+WPA on the same SSID (Tkip/AES) are Apple devices sensitive to this combination? I know some PC are.
I normally disable the lower data rate 1, 2, 5,5, 11 6, 9 Mbps and make 12 mandatory. Is this also the way to go with Apple?
Keep the mind open.
regards. F

Hi Scott,
Thanks. Useful information...
Do you also make a separate WLAN with FT enabled (for MAC´s) and a simular WLAN without FT (for PC)
Or do you use the same WLAN for MAC´s and PC? and how does a WLAN enabled with FT, handle a PC?
Frome the Cisco RocomenteEnterprise Best Practices for Apple Mobile Devices on Cisco Wireless LANs documentation i found:
"The following are the WLAN configuration recommendations for adding 802.11r FT clients to the
WLAN network"
The best practices recommendation listed below is the result of cooperative work between Apple and Cisco.
• Configure an additional WLAN for fast transition 802.1x clients.
• Configure an additional WLAN for fast transition PSK clients.
The reason for this recommendation is legacy radio drivers will not understand the added information in the association response packets of a WLAN with fast transition configurations.
- Fair enough..But we then will have extra WLAN in the air.. Not great! Guess you cant winn all the time
he following are the WLAN aaaaaaaaaaaaconfiguration recommendations for adding 802.11r FT clients to the
WLAN network.
Figure 2
provides an example of these c
onfigurations. The best practices
recommendation listed below is the result of cooperative work between Apple and Cisco.
Configure an additional WLAN for fast transition 802.1x clients.
Configure an additional WLAN for fast transition PSK clients.
The reason for this recommendation is legacy radio drivers will not understand the added
information in the association response packets of
a WLAN with fast transition configurations.
Although the 802.11r specification was ratified in 2008, not all client radio drivers have been
updated to handle the changes in management packets with respect to 802.11r. This includes
several Apple products.
Apple recommends using separate WL
AN and SSIDs for legacy clients

ISE CWA redirection problem for Apple devices

Hi,
I'm testing some guest scenarios (CWA) in my lab using ISE1.3 and WLC2504 (7.6.130).
I have noticed that redirection to ISE portal doesn't work for apple devices (iOS 7 and later).All other devices like laptops,androids etc work fine.
Seems that the workaround on WLC that bypasses the CNA on iDevices doesn't work in my case.The device tries to open the ISE portal and shows just a blank page (attached photo)
The problem doesn't appear for devices with iOS 6 but only for newer versions.
I've also tried with version 8.0 on WLC without success.
Any advise?
Regards.

Captive portal/wispr support for apple ios7
CSCuj18674
Description
Symptom:
When attempting to access the Guest Portal with an Apple iOS 7 device while the WLC "Captive Portal Bypass" feature is enabled, the web sheet on the device still appears, preventing the user from continuing the flow.
Conditions:
The Apple device is running Apple iOS 7.
Workaround:
In the ACL on the WLC used for captive portal redirection and exemption of special traffic for the Guest Portal, add exemptions for the IP resources that resolve from "www.appleiphonecell.com" and "captive.apple.com" FQDNs.
IMPORTANT NOTE: These IP addresses are associated with the FQDNs of "www.appleiphonecell.com" and "captive.apple.com" and are subject to change by the entities hosting those domains. If the IP addresses do change, the ACL would need to reflect that.

Are purchased songs exclusively for Apple devices?

This may sound like a simple question.
Are the songs purchased from iTunes only playable for Apple devices? Meaning we can sync all Apple devices we have and get the same songs?
Is there any way to convert the purchased songs to mp3 in order to transfer it to non-Apple device?
iTunes is user-friendly for me, but if the purchased songs aren't playable on non-Apple devices, I might need to find another sources. Any idea?

Yes you can convert tracks to MP3 version in iTunes.
1. Go into iTunes preferences
2. On the General Tab, click on Import Settings
3. Change the Import Using setting to be MP3 Encoder.
4. Click Ok and then Ok to close preferences.
5. Now select a track or tracks that you want to convert to MP3.
6. Then click on the Advanced Menu and select the Create MP3 Version.
This will create an MP3 version of the tracks you selected, it works fro content purchased from the iTunes Store, provided it is in iTunes Plus format (no DRM). Make sure your use of the converted tracks does not breach the Terms of Use you agreed to here :
http://www.apple.com/legal/itunes/us/terms.html#SERVICE
http://www.apple.com/legal/itunes/us/terms.html#SALE
Specifically:
10. Purchase or Rental of Apple Content
a. Products Requirements. You acknowledge that use of Products may require the use of other hardware and software products (e.g., the ability to make copies of Products on physical media and render performance of Products on authorized digital player devices), and that such hardware and software is your responsibility. Products may only be downloaded once; after being downloaded, they cannot be replaced if lost for any reason. Once a Product is purchased or rented (as applicable) and you receive the Product, it is your responsibility not to lose, destroy, or damage the Product, and Apple shall be without liability to you in the event of any loss, destruction, or damage.
b. Use of Products. You acknowledge that Products (other than the iTunes Plus Products) contain security technology that limits your usage of Products to the following applicable Usage Rules, and, whether or not Products are limited by security technology, you agree to use Products in compliance with the applicable Usage Rules.
Usage Rules
Your use of the Products is conditioned upon your prior acceptance of the terms of this Agreement.
(ii) You shall be authorized to use the Products only for personal, noncommercial use.
(iii) You shall be authorized to use the Products on five Apple-authorized devices at any time, except in the case of Movie Rentals, as described below.
(iv) You shall be able to store Products from up to five different Accounts on certain devices, such as an iPad, iPod or iPhone, and Apple TV at a time; provided that each iPhone may sync ring tone Products with only a single Apple-authorized device at a time, and that syncing an iPhone with another Apple-authorized device will cause any ring tone Products stored on such iPhone to be erased and, if you so choose, to be replaced with any ring tone Products stored on such other Apple-authorized device. Additional restrictions apply to Movies Rentals, as described below.
(v) You shall be authorized to burn an audio playlist up to seven times.
(vi) You shall not be entitled to burn video Products or ring tone Products.
(vii) You shall be entitled to export, burn (if applicable) or copy (if applicable) Products solely for personal, noncommercial use.
(viii) You may use only ring tone Products as a musical “ringer” in connection with phone calls.
(ix) Any burning (if applicable) or exporting capabilities are solely an accommodation to you and shall not constitute a grant or waiver (or other limitation or implication) of any rights of the copyright owners in any audio or video content, sound recording, underlying musical composition, or artwork embodied in any Product.
(x) You agree that you will not attempt to, or encourage or assist any other person to, circumvent or modify any security technology or software that is part of the Service or used to administer the Usage Rules.
(xi) The delivery of Products does not transfer to you any commercial or promotional use rights in the Products.
(xii) iTunes Plus Products do not contain security technology that limits your usage of such Products, and Usage Rules (iii) – (vi) do not apply to iTunes Plus Products. You may copy, store and burn iTunes Plus Products as reasonably necessary for personal, noncommercial use.
(xiii) Usage rules for software Products are governed by the terms of any end-user agreements or other terms and conditions required for use of such Products.
(xiv) You shall be able to manually sync a Movie from at least one iTunes-authorized device to devices that have manual sync mode, provided that the Movie is associated with an Account on the primary iTunes-authorized device, where the primary iTunes-authorized device is the one that was first synced with the device, or the one that you subsequently designate as primary using iTunes.

Lotus Traveler Address Encoding for Apple Devices Problems with Z10

Hi,
we have problems with the Lotus Traveler Address Encoding for Apple Devices IBM Notes and Domino wiki
We are running Traveler 9.0 with BES 10.1 and 10.1.0.2354 on the Z10.
When composing a new mail addresses from our Domino NAB are shown like this: [email protected] instead of the name. It seems to me that name search is first looking to the Internet address field in the Domino NAB. In our case this field is empty (and cannot be filled with an address). If the field is empty, the User name or the Short name field seems to be used. This fields are filled with Domino like names like John Doe/City/Company. The Traveler Server will convert these names (see link above) and the Device (Z10) should only show the common name instead of the converted name.
This is not working on our Z10s. The converted name is always shown like [email protected] and you don't know the real name.
Is the problem known? Any workarounds?
Edit: Further investigations have shown that the conversion works if you use an address in the mailbox the first time. If you use it later again, it is coming unconverted from the address chache. Also if you perform a remote search from the contacts app the converted name instead of the common name is shown.
Regards
Nico

Hi Friend,
While your idevices still having apps downloaded by the old Apple ID, Apple Store will ask you for the old Apple ID and password to updated them. But, if you delete all apps downloaded by the old Apple ID, then download again by the new Apple ID, Apple Store will not ask you anymore for the old one.
Hope it helps

USB devices and Webcam not working or installing on Pavilion Laptop

Hi there,
I have a HP Pavilion Dm3 1030 sa,
For a while now certain USB devices have just not worked on the laptop, specifically printers and mice, despite me reinstalling the drivers for those devices on the laptop. I tried the devices on other computers and they worked fine.
This was annoying but I put up with it.
Now the webcam and microphone have stopped working and are no longer recognised by the computer. I have reinstalled the webcam software but cannot find the drivers for it. The software (arc soft webcam) says the inbuilt webcam is not connected.
I have been able to get my iphone to connect via usb and usb drives work most of the time. I don't really know what is going on. When I look at devices that don't work in device manager It says that there is a USB I/O error. I have tried reinstalling the drivers using device manager but that didn't work either. Any advice would be appreciated. Not being able to use a mouse is annoying as track pads are slow.
Pn vj409ea#ABU
Is my notebook in the warranty period? No (three months out)
Is the originally installed OS still installed (Yes)
Have I changed the partitions (NO)
Thanks for any help
Kieran Latham

run an extended _*Apple Hardware Test*_.
JGG

I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

HD for Apple Devices (10 Mbps) not working

Similar Messages

Maybe you are looking for