HD Fury to solve HDCP Problem
Hi guys,
I urgently need your help with the following problem:
I have a "Sony PFM-42V1" Plasma TV that doesn't support HDMI. Therefore I am using a HDMI to DVI converter. Picture quality is great, but unfortunately my TV doesn't support HDCP, so I can't watch any movies...
Now I am wondering if this HD Fury could solve my problems?
http://www.monoprice.com/products/product.asp?cid=101&cp_id=10114&cs_id=1011402&pid=4559&seq=1&format=2
I just checked the specs and it says that my TV has an analog RGB/YUV input and a resolution of "854 x 480 (WVGA)".
I have to admit that I my technical know how is very limited, so I am not sure if it means that it can't support "720p (1280x720) and 1080p (1920x1080)" as required?
If so, do you know another HD Fury that should work?
Thank you so much for your help. It's highly appreciated.
All the best,
duersen
In premiere I can control the camera, I can capture sound, but I cannot capture video
If you can capture sound, you also capture video, because it is a transport stream, and nothing more than a digital transfer of binary data. There is no way you can only capture sound and not video, because they are in the same data stream. You can limit import into your project to audio only, or video only, but the captured stream always includes both audio and video. So check your import settings or use HDVSplit, a free capture utility to capture.
Similar Messages
-
I bought an Apple TV and when I rent a movie, I get a display saying that no HDCP is available. How can I solve this problem?
Have you verified that your TV is HDCP compliant? Consult manual and/or post model so someone can check.
-
When I login to update my existing apps, the login window shows the wrong apple id. i cannot change it because it is all grayed out. how do i solve this problem?
Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID. -
This is regarding a brand new ASUS PA 279Q, 2560 x 1440 IPS monitor. I'm connected via mini display port (into thunderbolt port on MacBook Pro) to display port on ASUS monitor; using cable ASUS included with the monitor. Mid 2012 MacBook Pro…full specs at bottom of this post.
I have resolution set at 2560 x 1440 which is the native resolution according to the ASUS spec. I tried the other resolutions available in my System Preferences and text displayed rough with those settings too. I've tried adjusting contrast, brightness and sharpness via the ASUS control panel and didn't solve the problem. Also tried calibrating via Mac's system preferences/display and that did not improve text display either. All the text on this monitor (no matter what software I launch, Finder, InDesign, Illustrator, MS Word, Excel, VMWare Windows XP, Windows versions of Word, Excel, Acrobat, etc, all are consistently rendering text the same way --- ROUGH and with "HALOS" around each letter.
All point sizes of text and at various scales, display very rough on the screen. (My comparison is the retina display of my MBP and a Thunderbolt…so those two displays are my expectations.) I'm using the same MBP for both a Thunderbolt display (at work) and this ASUS at my home office.
On the ASUS it's not as noticeable when the text is on white backgrounds, but I'm a graphic designer and compose images with text all day everyday. Not to mention the specs on this ASUS PA279Q indicate it's built for the professional so I would expect better text rendering. I haven't even addressed color calibration and balance yet, because that won't matter to me if the text won't display any better than it is now.
I was so hopeful after researching all the specs on this monitor it would be a viable alternative to the glossy display of the Thunderbolt display. (Which, I do love the Thunderbolt display for it's clarity and how it displays crisp, clean text at all sizes. (This ASUS actually displays text decently if I increase the text so each letter is about 4" high. Which is pointless for practical purposes -- that'd be like doing page layout through a microscope!)
I kept holding off on getting a monitor for the home office thinking the Thunderbolt would be updated soon. I'd be sick if I dropped a grand on piece of 2011 technology only to learn a few days later an updated Thunderbolt display hit the market! Not to mention, I'm praying Apple comes out with a less reflective Thunderbolt display. The glare and reflection is the main reason I looked elsewhere for a large monitor; hence my asking for help. Hoping the ASUS text display issue can be worked out. My expectation is for it to display like the MBP retina and Thunderbolt display text. That possible?
Alternatively, I guess I could do the Apple Refurb Thunderbolt at $799. And see if there's a decent aftermarket anti-glare I could stick on it?
Thanks for reading my post. Hope someone can help; offer any suggestions? Words or wisdom?
Has anyone else had similar issues and figured out a resolution? Help!
MacBook Pro
Retina, Mid 2012, 2.3 Ghz Intel i7
8GB 1600 MHz DDR3
OS X 10.8.5
NVIDIA GeForce GT 650M 1024 MB
ASUS PA279QI uninstalled those two items. It still runs slow on start-up and when opening safari, firefox, iphoto, itunes, etc. It's not snappy like it used to be. Any other ideas? Thanks.
-
after updating to Firefox 7.0.1, menu bar for Google(web ,image,video,map etc),yahoo, Facebook (message,notification,profile,home) and others site are disabled. even I cant log out from different sites cz the log out bar is completely disabled. I tried with Firefox 4;5 and 6, same problem exist . I tried by active all add ons for facebook, same problem exist. If I use internet explorer , I don't find such problem with it.
How can I solve this problem?Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long. -
Problem with an incoming message. For example, during my conversation the second line receives a call, I hear the sound in dynamics such as "piiiip piiiip," but when in this situation I recieve SMS and i hear established melody and I do't hear the person on all over SMS. How to solve this problem? Perhaps someone tell me? save in advance
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
hi,
I see that I have a particulier abonnee of my ISP , which has closed all the ports for security reason and they don't want to open any of it 80,443 ect.
suppose If I want to use Essential server 2012 how I can solve this problem , essential wants domain name whith A record.
I asked DDNS service provider if I lease from them a domain name whith A record would that help to open or manipulate the port 80,443 they said that I have to solve this problem myself . they lease only domain names with dynamic dns records.
so what can be a solution the ISP provider won't open this ports , how I can solve this problem . domain name with ip adres is not helping so what it's go to help?
thanks
johan
h.davidThe domain name in this instance is only used for remote access, and is seperate from the active directory domain name.
If your ISP blocks port 80 and 443, and you dont intend to use remote access anyway, the wizard will likely not complete successfully whether you have a valid domain name or not.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+ -
hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problemThere is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it
-
See who can solve this problem
Parameter name || Typing || Associated Type
ACGL_ITEM || Structure || ACGL_ITEM
this give error ( Typing is only for Like,Type,Type Ref To )
therefore i change it to Type
but it telling me that the ( TABLES parameters are obsolete!)
guys what can i do, is there a solution to solve this problem??
Thank you.
Edited by: guanwei su on Mar 10, 2008 7:05 AMThe following code might be helpful:
TYPES: types_t_acgl_item TYPE STANDARD TABLE OF acgl_item.
DATA: gt_acgl_item TYPE types_t_acgl_item.
PERFORM sub_perform USING gt_acgl_item.
*& Form SUB_PERFORM
* text
* -->UT_ACGL_ITEM test Table
FORM sub_perform USING ut_acgl_item TYPE types_t_acgl_item.
ENDFORM. " SUB_PERFORM
Hope That Helps
Anirban M. -
If you can solve this problem, then you are a true iPod Classic Genius !
So I have talked to every level at Apple's iPod support, and to list all the things they made me do would exceed the size limit of this message board. They even made me send back my original iPod Classic, and I had to wait for almost 1 month to receive my replacement. Here is a summary of my problem, that they (Apple support) have not been able to solve :
- I have a very extensive iTunes collection - over 77,000 songs. All of them were ripped, using iTunes.
- I use the ID tags extensively - i.e. every field is used, and the comments are filled to the maximum allowed characters.
- I am not able, to synch more than ~ 23,300 songs to any of my two 160 Gb iPod classics - therefore, including my exchanged iPod, this issue shows up on three different iPods.
When synching more than 23,300 songs, my iPods are no longer able to play any songs. In the 'About' menu, the iPod shows the wrong number of songs (i.e. 17,300 instead of 24,000) and a huge amount of 'disk space used' is flagged as 'other' (in orange). When clicking on 'Album' or 'Songs', the iPod shows the message 'No songs found'.
When synching less than 23,300, I am able to resolve this issue by restarting the iPods after synching. However, even when synching less than 23,300 titles, the iPods show the wrong number of songs, right after synching, and the huge amount of 'disk space used' for 'other'. Therefore, I have to restart my iPods every time I synch them.
The same problem occurs when using my old Power Book G4 (OS X 10.4.10), and on my new 2.4 GHz MacBook Pro (OS X 10.5.1).
I am using an external HD to hold my music files, which is directly connected to my USB2 port on either Laptop.
I have uninstalled and re-installed iTunes and all the firmware and software is up-to-date.
I have rebuilt my iTunes Library from scratch several times.
I have no problem, playing any of the 77,000+ songs in iTunes.
My assumption is, that there is a size limit for the iTunes library index file on the iPod. Can somebody confirm this theory ?
It seems funny, that the same problem shows up on three different iPods using two different Mac computers.
Does anybody have the same problem ?
Is this an issue that Apple is ignoring ?
Does anybody know, how this can be resolved ?
Thank you very much for your help.!
Message was edited by: Rochelle Renee ChristenHi There,
I have the exact same problem as you. I'm on my third ipod 160gb. All three have had the freezing and resetting problem. Like you my problems only start once I try to sync more than about 20,000 songs, which is around 90gb.
I have a 140gb music library. If I sync 70gb of my library it works fine. If I wipe that and sync the other 70gb it works fine so I know my mp3 files are okay. If I try to upload the whole library it freezes when I try to select any music.
If I'd only wanted to sync half my music library I'd have bought an 80gb ipod.
I thought firmware 1.1 and itunes 7.6 would solve my problem. No. Exact same problem. I contacted apple support. A genuinely helpful guy advised me to rebuild my music library and change my ipod drive letter. With baited breath I did all this, then restored my ipod to start from a clean slate. I synced my library in 10gb chunks... and it froze up around 90gb just like it always does.
What upsets me is the hours I've spent glued to my PC re-syncing music, searching through forums for answers. I'm absolutley pig sick of it. I never had a minutes trouble with any of my other ipods.
Please, please, please apple investigate this problem, it only happens when these ipods are over half full. Please let us have a firmware update that addresses the bugs us folks are complaining about instead of adding new features we'd be grateful for if only our ipods worked in the first place. -
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
I have a iPhone 5. In usage, it says i have 2.1 gigs used because of photos and camera. I have deleted all my photos via iPhoto and now reset the phone back to factory settings in order to try to solve this problem, to no avail. Both iTunes and the phone say that 2.1 gigs are being used, even though the phone now has nothing on it. What is going on?
Yeah it works fine over wifi the problem is when I try to use it over my 3G. It's really stressing me out now.
-
I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?
IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.
-
I can not buy the gem in the "clash of clans" game, It says "My purchase could not be completed". How I can solved this problem?
If you are also getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
[SOLVED] Installation problem with pacstrap
Hi guys, I am a new user of Arch Linux.
I wanted to try this operating system then I decided to install that on my Asus F200MA. Unfortunately, when I try to install ArchLinux, I get an error while downloading the base packages with pacstrap.
My HDD is made by 3 partitions:
/dev/sda1 - 51200 MB: This is the root partition
/dev/sda2 - 411690 MB: This is the home partition
/dev/sda3 - 4096 MB: This is the swap partition
After mounting these partitions, after using the pacstrap command and after the end of the download process, I get a few error messages:
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
==> ERROR: Failed to install packages to new root
I really can't understand the reason of these errors, how can I solve the problem?
For formatting and mounting the partitions I used these commands:
# mkfs.ext4 /dev/sda1
# mkfs.ext4 /dev/sda2
# mkswap /dev/sda3
# swapon /dev/sda3
# mount /dev/sda1 /mnt
# mkdir /mnt/home
# mount /dev/sda2 /mnt/home
and then I used this command:
pacstrap /mnt base base-devel
Photo of the errors: http://i.imgur.com/4BRhlC7.jpg
P.S.: Can you also explain me the reason of the signature's errors?
Thanks for all
Last edited by xRedFox (2015-04-10 21:59:20)Do you use the most recent installation disc image?
Maybe you are looking for
-
How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media
-
How to stream audio in Windows Phone 8.1?
I have a Windows Phone Silverlight 8.0 app I want to update to 8.1 using WinRT. It streams audio in the background. In Silverlight, I used BackgroundAudioPlayer to set the Track to a Uri. It's not clear how to do this with MediaPlayer in WinRT. I
-
How to install Oracle 11g R2 Express Edition in Arch 64?
Does anybody know how to do that? The AUR website has a package for the beta version of Oracle 11g R2 Express Edition (https://aur.archlinux.org/packages.php?ID=48366), but somebody commented that it had some problem. After a few months, I think it's
-
Can Quick Look but not open a PowerPoint file
Someone sent me a power point file, and I can open it in Quick Look both in Apple Mail and in the Finder. However, Quick Look doesn't allow me to enlarge it big enough to make out the details or to print it. Text Edit won't open it. When I try to dou
-
NHL Gamecenter Premium Upgrade
As a huge NHL fan, I use the NHL Gamecenter app quite a bit. I recently upgraded my phone to the LG G2, and now I can't seem to get any of the content that comes with the Premium upgrade that I believe I'm supposed to get for free as a Verizon custo