HD I/O issue with MBP 17(2010 MC024)
After about half year use of my MBP 17, the I/O of local hard disk(5400rpm 500GB) gets really slow. I had only 1 partition(system shows 499GB) on the disk.
AJA System Test show the HD just hit 49MB/s of IN and 48MB/s of out, more or less. And I also run the same program from Blackmagic Design, the result remains the same. The booting time of the system was also super slow, the icon on the starting-up screen needs to run more than 40 rounds but it only needed 12 to 15 rounds when it was new. Not only the booting, copying large video files from/to external HD also takes more time. Anything relating to HD I/O gets slow, even the launch of Chrome or Safari---it took no time to show up and the icon in the dock only jumped one time, but it takes more the 10secs to get started now. So I don't think it's the mistake of the Testing softwares, and I believe the system could handle the basic I/O efficiently both in testing and real usage.
After several methods including defragment, catch cleaning and something like that, I gave up and reinstall the Mac OS 10.6.3(install DVD in box). everything returns normal, AJA system test can reach 75MB/s of both IN and OUT.
I really can't find out why the I/O of the local HD gets slower and slower. I did installed lots of softwares but can softwares affect the I/O ability of a system? A PC with windows do gets slow without proper maintenance but I never see an old windows getting slow to copy files.
Has someone ever encountered this before? it's really weired and I really need some help or advices.
Thanks!!!
It turns out that I tested my 30" ACD with a friends Macbook and it has the same phenomenon. It's quite strange. The darker the blue or grey the more this line flows out from the grey bar frame on Safari or Mail windows. The smaller the window the less evident the phenomenon. Again, it has no effect on the windows themselves, and only occurs toward the top of the display. When you move the window down on the screen it disappears. And it is only the line below the grey upper bar that is rather bold that bleeds out across the screen.
I wonder if there is a way to reset the display or move to some default setting that would correct this.
Similar Messages
-
Well, I had installed in my new computer a trial version from Acrobat XI Pro, but I had issues with Microsoft Word 2010, since it did not allow me to save changes on my file. I uninstalled it from my computer before the trial period was over, and then, after I solved the issue with Office, I wanted to get it back for a time, but the installer does not allow me to choose Trial Version. I can reach that screen where you choose between key and trial, but once I press trial and click on next, it does absolutely nothing at all.
I have tried to manually delete folders, and I even used CC Clean to make a registry set up, but nothing out of that is working for me at all, and it keeps happening. I have no really idea what to do, and I kinda need to use Acrobat immediately for a file.The trial can only be loaded 1 time as far as I know. You could try http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over parts of the Acrobat folder, and reboot. Then try an install again, but my guess is you will have to purchase Acrobat at this point.
-
Calendar Issues with ActiveSync Exchange 2010 14.1.438 to iPhone IOS 6.1.4
The iPhone is missing some new calendar meetings and appointments. It is so random, some of them are meeting request I accepted and some of them are appointment I made on Outlook 2010. I see them on Outlook 2010 and OWA. If I delete the meeting or
appointment from Outlook and then put it back; it shows up on my iPhone. It also sync if I delete the syncing of the calendar to the iPhone and put then add it back on.Hello,
Please refer to the following article to troubleshoot your issue.
http://blogs.technet.com/b/exchange/archive/2010/07/01/3410271.aspx
http://support.microsoft.com/kb/2563324
If the issue persists, please collect some logs.
http://blogs.technet.com/b/exchange/archive/2012/01/31/a-script-to-troubleshoot-issues-with-exchange-activesync.aspx
Cara Chen
TechNet Community Support -
Facing bug Issue with Visual Studio 2010 SP1 software. need a Hotfix Patch KB2561001
Hi Team,
i have installed Visual Studio 2010 SP1 software in my system. but i am facing some issue with a bug. This bug needs a Specific Hotfix Patch ( KB2561001).
But when i am clicked on above link, not able to find this patch.
Kindly request you to provide this Requested patch as project has been stuck without this.
please look into this issue on priority. Eager to listen from your side.Hi mihir ray,
Like this report:
https://connect.microsoft.com/VisualStudio/feedback/details/611665/storegeneratedpattern-does-not-saved-properly-into-edmx-entity-framework-4-0
It seems that the link for this kb is not available. So the real issue is that which kind of issue you get, and then check whether this issue has been resolved by the latest VS version. Like the above report, maybe the new VS version would be better for
certain limitations for old versions.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I have a new C2D MBP, and my linksys WRT54G router will not work with it. When i plug the wall ethernet cable into my MBP, the ip address and all that info gets filled in and i can acces the internet. But when i try to connect to the router using wifi or ethernet cable, no ip address is assigned to the MBP, and i can't access the internet. This was not an issue with my old MBP where i just turned the wifi on and it connected.
What is causing this??
ThanksI had similar problems with a WRT54G Linksys Router, and after a bunch of searching, I found that there is a problem with the latest firmware on the router. I downgraded the firmware as the post recommended (Linksys Forum) and now all my macs can connect.
Here's a link to the post I found on the Linksys site that solved my problems:
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&messag e.id=10007#M10007 -
I would love some help with this issue. I have configured my SharePoint foundation 2010 site to use Claims Based Auth with Certificate authentication method with ADFS 2.0 I have a test account set up with lab.acme.com to use the ACS.
When I log into my site using Windows Auth, everything is great. However when I log in and select my ACS token issuer, I get sent, to the logon page of the ADFS, after selected the ADFS method. My browser prompt me which Certificate identity I want
to use to log in and after 3-5 second
and return me the logon page with error message “Authentication failed”
I base my setup on the technet article
http://blogs.technet.com/b/speschka/archive/2010/07/30/configuring-sharepoint-2010-and-adfs-v2-end-to-end.aspx
I validated than all my certificate are valid and able to retrieve the crl
I got in eventlog id 300
The Federation Service failed to issue a token as a result of an error during processing of the WS-Trust request.
Request type: http://schemas.xmlsoap.org/ws/2005/02/trust/RST/Issue
Additional Data
Exception details:
Microsoft.IdentityModel.SecurityTokenService.FailedAuthenticationException: MSIS3019: Authentication failed. ---> System.IdentityModel.Tokens.SecurityTokenValidationException:
ID4070: The X.509 certificate 'CN=Me, OU=People, O=Acme., C=COM' chain building failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. 'A certification chain processed
correctly, but one of the CA certificates is not trusted by the policy provider.
at Microsoft.IdentityModel.X509CertificateChain.Build(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509NTAuthChainTrustValidator.Validate(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509SecurityTokenHandler.ValidateToken(SecurityToken token)
at Microsoft.IdentityModel.Tokens.SecurityTokenElement.GetSubject()
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
--- End of inner exception stack trace ---
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.BeginGetScope(IClaimsPrincipal principal, RequestSecurityToken request, AsyncCallback callback, Object state)
at Microsoft.IdentityModel.SecurityTokenService.SecurityTokenService.BeginIssue(IClaimsPrincipal principal, RequestSecurityToken request, AsyncCallback callback, Object state)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.DispatchRequestAsyncResult..ctor(DispatchContext dispatchContext, AsyncCallback asyncCallback, Object asyncState)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.BeginDispatchRequest(DispatchContext dispatchContext, AsyncCallback asyncCallback, Object asyncState)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.ProcessCoreAsyncResult..ctor(WSTrustServiceContract contract, DispatchContext dispatchContext, MessageVersion messageVersion, WSTrustResponseSerializer responseSerializer, WSTrustSerializationContext
serializationContext, AsyncCallback asyncCallback, Object asyncState)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.BeginProcessCore(Message requestMessage, WSTrustRequestSerializer requestSerializer, WSTrustResponseSerializer responseSerializer, String requestAction, String responseAction, String
trustNamespace, AsyncCallback callback, Object state)
System.IdentityModel.Tokens.SecurityTokenValidationException: ID4070: The X.509 certificate 'CN=Me, OU=People, O=acme., C=com' chain building
failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. 'A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
at Microsoft.IdentityModel.X509CertificateChain.Build(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509NTAuthChainTrustValidator.Validate(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509SecurityTokenHandler.ValidateToken(SecurityToken token)
at Microsoft.IdentityModel.Tokens.SecurityTokenElement.GetSubject()
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
thx
Stef71This is perfectly correct on my case I was not adding the root properly you must add the CA and the ADFS as well, which is twice you can see below my results.
on my case was :
PS C:\Users\administrator.domain> $root = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("C:\
cer\SP2K10\ad0001.cer")
PS C:\Users\administrator.domain> New-SPTrustedRootAuthority -Name "domain.ad0001" -Certificate $root
Certificate : [Subject]
CN=domain.AD0001CA, DC=domain, DC=com
[Issuer]
CN=domain.AD0001CA, DC=portal, DC=com
[Serial Number]
blablabla
[Not Before]
22/07/2014 11:32:05
[Not After]
22/07/2024 11:42:00
[Thumbprint]
blablabla
Name : domain.ad0001
TypeName : Microsoft.SharePoint.Administration.SPTrustedRootAuthority
DisplayName : domain.ad0001
Id : blablabla
Status : Online
Parent : SPTrustedRootAuthorityManager
Version : 17164
Properties : {}
Farm : SPFarm Name=SharePoint_Config
UpgradedPersistedProperties : {}
PS C:\Users\administrator.domain> $cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("C:\
cer\SP2K10\ADFS_Signing.cer")
PS C:\Users\administrator.domain> New-SPTrustedRootAuthority -Name "Token Signing Cert" -Certificate $cert
Certificate : [Subject]
CN=ADFS Signing - adfs.domain
[Issuer]
CN=ADFS Signing - adfs.domain
[Serial Number]
blablabla
[Not Before]
23/07/2014 07:14:03
[Not After]
23/07/2015 07:14:03
[Thumbprint]
blablabla
Name : Token Signing Cert
TypeName : Microsoft.SharePoint.Administration.SPTrustedRootAuthority
DisplayName : Token Signing Cert
Id : blablabla
Status : Online
Parent : SPTrustedRootAuthorityManager
Version : 17184
Properties : {}
Farm : SPFarm Name=SharePoint_Config
UpgradedPersistedProperties : {}
PS C:\Users\administrator.PORTAL> -
Display Issues with mini (Mid 2010) and LG L246WP
I recently purchased a new mini (Mid 2010 base model) and planned to use it with my 24" LG L246WP monitor, which is about 3 years old. The monitor has VGA, component, and HDMI inputs.
I used an HDMI-to-HDMI cable to connect the mini directly to the monitor, and the output is completely messed up. The mini recognized the monitor (titling the System Preferences > Display dialog with 'L246WP') and set it to the monitor's native resolution of 1920x1200, but on the monitor the image is cropped to what looks like a 4:3 aspect ratio and with part of the image shifted up and left so I cannot view the top menu bar or the left hand side of the desktop. The monitor's on-screen display shows 1080p in this mode.
The Display dialog also gives me an option for 1080p. I can select this and use the Underscan slider to resize the desktop output to fit on the screen, but it is still shifted left and must be resized smaller than the available display space (plus the total image is only 1080 pixels, not using the monitor's full native screen). In this mode, 1080p also shows on the monitor's on-screen display.
I tried 1024x768 to see if I could get a properly-positioned image, but the desktop was shifted just like in the 1920x1200 case and the monitor's on-screen display status still reported 1080p.
The monitor has a menu setting under an HDMI heading with "Video" and "PC" options, but changing this selection does not make a difference.
Since the monitor came out before HDMI was as widespread as it is today, it came with a DVI-to-HDMI cable, so I also tried using that cable with the HDMI-to-DVI adapter that came with the mini, but this did not make a difference either.
To prove it wasn't the HDMI cable, I connected the mini to my Samsung 6300 series 40" LED HDTV and with some tweaking of the Underscan slider the displayed image filled the screen perfectly.
I've searched the Internet and various forum threads (i.e. http://hardforum.com/showthread.php?t=1167222&page=63) seem to indicate this monitor can send a corrupted EDID that causes issues, especially with nVidia graphics drivers. On Windows you can use registry or driver hacks to override the EDID with the correct values, but on OS X this doesn't seem possible (I was hoping for a Terminal one-liner but it seems this doesn't exist). I have seen some mentions of the shareware SwitchResX (http://www.madrau.com), which looks like it gives you the option to override resolution settings, but I haven't tried this yet.
It also appears to me that the monitor is always interpreting the signal (or the mini is always sending the signal) as 1080p, even if I've set 1920x1200 in the Display dialog. I don't know if this is a defect in the monitor where it always assumes the HDMI input is a 1080p source (previous I used it with an Xbox 360 with no issues but that was 1080p HDMI), or if is a bug in the graphics drivers (or at least a lack of flexibility / miscommunication to the user trying to handle a corrupt EDID).
I asked my local Genius Bar for advice today (without bringing any hardware in) but was not told anything I didn't already know.
I'm trying to determine the best way to work through this issue. *My questions are:*
Would it make any difference if I used a Mini DisplayPort-to-DVI adapter (and then my DVI-to-HDMI cable to the monitor's HDMI input)?
What about a Mini DisplayPort-to-VGA adapter? In the past I used a 12" Powerbook (via a mini-DVI-to-VGA adapter) with this monitor and had no display issues like this, but I'd prefer to stick with a digital connection on my brand new mini.
Is SwitchResX the only practical way in OS X to override a corrupt EDID and force the mini to output a certain resolution?
Besides the various adapters and SwitchResX, is there anything else I should try before buying a new monitor?Hello EPWilson4984.
I have been experiencing the same issues you described. Connecting my brand new Mac Mini to my Westinghouse 24”monitor (L2410NM, 1920x1200 pixel resolution) produces a very fuzzy and washed out image quality. The Mac recognizes the monitor and applies the right resolution (1920x1200), but it looks just awful. The EDID info is definitely not right.
Now, I tried your suggestion (DVI-to-HDMI), and similar suggestions from other threads, but nothing works. Nothing seems to work at all.
The main input for the monitor is HDMI, so whatever cable I use, in the end always has to connect to the monitor via HDMI. I tried all these combinations with zero success:
Mac mini -> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –HDMI adapter-> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –DVI adapter-> DVI-to-HDMI cable -> monitor (result: it gives me a blank screen, no image at all)
I’m running out of options. Don’t know what to do. The 24” monitor produces beautiful, crisp images when hooked to my Windows 7 PC. It looks horrible when connected to my brand new Mac Mini.
Any alternatives you may have come across? Please let me know, thank you. -
Hi,
I am getting issues when trying to access these new SharePoint 2010 Mode Web Applications I have migrated to SharePoint 2013. A record pointing to WFE Cluster OK. Problem is sometimes I get a blank page, sometimes I get prompted with a password, sometimes
I get the site, but style is poor and sometimes I get a page that looks fine (it always takes a long time - there are ping issues). I have had a quick look around and noticed that this can be the Request Management Service. I have it running on all 3 WFE along
with Distributed Cache. This is really worrying and it is having a big impact on me progressing.
Any ideas. Reluctant to run some powershell commands some people have recommended as they could cock things right up.
Thanks.
JohnHi John,
if you have load balancer you can stop Request Management.
But my advice that you need to check the ULS logs, try to set the diagnostic logging to verbose and catch the errors in the logs and send them.
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem -
Odd power issue with MBP Early 2011 13"
Greetings.
I have a MBP that will only boot when the Magsafe cable is attached AND the battery is removed or at less than 100% - the power button is completely unresponsive.
The problem started with a failing battery that had swelled to the point of making the click pad unusable. Towards the end of the life of this battery the MBP would fail to hibernate if the battery ran out, and upon being rebooted the computer would have reset it's clock to December 2001 and have forgotten recent additions to passes in the keychain.
This battery eventually failed (I presume) - leading to a computer that was completely unresponsive to the power button. I removed the battery, which led to the first instance of the computer only booting when connected to a power source. If the computer (now without battery) was connected to a power source, (which in turn leads it to boot up), then turned off again, the only way to reboot the computer was to physically disconnect and reconnect the Magsafe adapter.
I ordered a replacement battery and installed it, the problem of booting only by connection to power persisted. A novel twist was that when the battery is fully charged and displaying a green light the MPB will not boot at all when the magsafe is connected - the battery must be removed or at below 100% charge.
During normal operation (such as now) the power button remains completely unresponsive. A short press will not bring up the option to shutdown / sleep my computer and a long press will not perform a hard shut down, as per normal operation.
I've attempted to reset the SMC following Apple's instructions (found here - Intel-based Macs: Resetting the System Management Controller (SMC) ) several times, to no effect, with the battery removed and with a working battery installed. Perhaps of note is that the times I've tried the SMC reset I've never experienced the LED on the Magsafe changing states or temporarily turning off.
Really stumped as to what's going on here - any takers?
Cheers, Will.Perhaps also of note;
The majority of times the computer is safely turned off and then rebooted by reconnecting the Magsafe, I'm presented with a message telling me the computer's date is set to December 2001. The likelihood of this happening seems determined by how long the computer had been resting before being rebooted with the Magsafe.
Is this in anyway damaging the computer - should I be attempting to minimise how frequently I turn on the computer using this method? -
Smartview Issue with MS Office 2010 on windows 7
Hi,
I have installed Hyperion Smartview 11.1.1.1 on windows 7(64 bit AMD Processor), After the installation i tried to go with Datasource manager but nothing it shows there in Right side panel("smartview data source manager").
Each option is in Disable mode(like Adhoc Analysis- Zoom In, Zoom out, Keep Only, Remove Only, Forms)
Also i am unable to find the EAS console( but instalation wizard shows it has been installed)
Version we are using -Hyperion Smartview 11.1.1.1
Ms Office- 2010(32 bit)
Platform- Windows 7 64bit( AMD Processor)
Here is my epm 11.1.1.1 Installation log
(Dec 23, 2011, 05:31:25 AM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, Result of checking assemblies: Ok
(Dec 23, 2011, 05:31:25 AM), com.hyperion.install.context.preinstall.PreinstallCheck, INFO, Checking TMP environment variable... Ok
(Dec 23, 2011, 05:31:34 AM), com.hyperion.hit.wizard.Wizard, INFO, Starting wizard.
(Dec 23, 2011, 05:31:34 AM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:WelcomeWizardState
(Dec 23, 2011, 05:31:45 AM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:DestinationState
(Dec 23, 2011, 05:31:48 AM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:InstallTypeState
(Dec 23, 2011, 05:31:59 AM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:FeatureSelectionState
(Dec 23, 2011, 05:37:05 AM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:InstallConfirmationState
(Dec 23, 2011, 05:37:39 AM), com.hyperion.install.wizard.impl.SummaryToInstallRule$1, INFO, Sending stdout/stderr logs to C:\Hyperion\logs\install
(Dec 23, 2011, 05:37:39 AM), com.hyperion.install.log.StdStreamsCaptureUtil, INFO, Trying to create log files for stdout/stderr in directory: C:\Hyperion\logs\install
(Dec 23, 2011, 05:37:39 AM), com.hyperion.install.log.LoggedOutputStream, INFO, Trying to set logStream..
(Dec 23, 2011, 05:37:39 AM), com.hyperion.install.log.DeferredOutputStream, INFO, Trying to set backingStream..
(Dec 23, 2011, 05:37:39 AM), com.hyperion.install.log.DeferredOutputStream, INFO, Setting backingStream: succeeded.
(Dec 23, 2011, 05:37:39 AM), com.hyperion.install.log.LoggedOutputStream, INFO, Setting logStream: succeeded.
(Dec 23, 2011, 05:37:39 AM), com.hyperion.install.log.LoggedOutputStream, INFO, Trying to set logStream..
(Dec 23, 2011, 05:37:39 AM), com.hyperion.install.log.DeferredOutputStream, INFO, Trying to set backingStream..
(Dec 23, 2011, 05:37:39 AM), com.hyperion.install.log.DeferredOutputStream, INFO, Setting backingStream: succeeded.
(Dec 23, 2011, 05:37:39 AM), com.hyperion.install.log.LoggedOutputStream, INFO, Setting logStream: succeeded.
(Dec 23, 2011, 05:37:39 AM), com.hyperion.install.log.StdStreamsCaptureUtil, INFO, Created log files for stdout/stderr.
(Dec 23, 2011, 05:37:39 AM), com.hyperion.install.log.StdStreamsCaptureUtil, INFO, stdoutLogLocation = C:\Hyperion\logs\install\installTool-install-stdout.log
(Dec 23, 2011, 05:37:39 AM), com.hyperion.install.log.StdStreamsCaptureUtil, INFO, stderrLogLocation = C:\Hyperion\logs\install\installTool-install-stderr.log
(Dec 23, 2011, 05:37:39 AM), com.hyperion.install.action.InstallActionBuilder, INFO, Installation Type: New-Components
(Dec 23, 2011, 05:37:40 AM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:InstallationState
(Dec 23, 2011, 05:38:50 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Started installing essbaseProductCommonComponents
(Dec 23, 2011, 05:39:02 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Finished installing essbaseProductCommonComponents
(Dec 23, 2011, 05:39:02 AM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for essbaseProductCommonComponents is success
(Dec 23, 2011, 05:39:04 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Started installing productCommonComponents
(Dec 23, 2011, 05:41:23 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Finished installing productCommonComponents
(Dec 23, 2011, 05:41:23 AM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for productCommonComponents is success
(Dec 23, 2011, 05:41:27 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Started installing tools
(Dec 23, 2011, 05:41:51 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Finished installing tools
(Dec 23, 2011, 05:41:51 AM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for tools is success
(Dec 23, 2011, 05:41:51 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Started installing commonComponents
(Dec 23, 2011, 05:43:46 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Finished installing commonComponents
(Dec 23, 2011, 05:43:46 AM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for commonComponents is success
(Dec 23, 2011, 05:43:48 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Started installing biplus_configlibs
(Dec 23, 2011, 05:43:50 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Finished installing biplus_configlibs
(Dec 23, 2011, 05:43:50 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Started installing biplus_financial_reporting_client
(Dec 23, 2011, 05:44:56 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Finished installing biplus_financial_reporting_client
(Dec 23, 2011, 05:44:56 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Started installing biplus_financial_reporting_common
(Dec 23, 2011, 05:44:56 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Finished installing biplus_financial_reporting_common
(Dec 23, 2011, 05:44:56 AM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for frClient is success
(Dec 23, 2011, 05:44:58 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Started installing essbaseAddins
(Dec 23, 2011, 05:44:58 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Finished installing essbaseAddins
(Dec 23, 2011, 05:44:58 AM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for essbaseAddins is success
(Dec 23, 2011, 05:44:58 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Started installing essbase_administration_services_client
(Dec 23, 2011, 05:44:58 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Finished installing essbase_administration_services_client
(Dec 23, 2011, 05:44:58 AM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for essbaseAdministrationConsole is success
(Dec 23, 2011, 05:45:16 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Started installing essbase_administration_services_webapp
(Dec 23, 2011, 05:46:36 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Finished installing essbase_administration_services_webapp
(Dec 23, 2011, 05:46:36 AM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for essbaseWebApp32 is success
(Dec 23, 2011, 05:46:39 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Started installing essbase_client
(Dec 23, 2011, 05:47:40 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Finished installing essbase_client
(Dec 23, 2011, 05:47:40 AM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for essbaseClient32 is success
(Dec 23, 2011, 05:47:44 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Started installing fdm
(Dec 23, 2011, 05:49:06 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Finished installing fdm
(Dec 23, 2011, 05:49:06 AM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for fdmClient is success
(Dec 23, 2011, 05:49:08 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Started installing hfm_client
(Dec 23, 2011, 05:49:57 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Finished installing hfm_client
(Dec 23, 2011, 05:50:00 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Started installing hfm_common
(Dec 23, 2011, 05:50:34 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Finished installing hfm_common
(Dec 23, 2011, 05:50:34 AM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for hfmAdmClient is success
(Dec 23, 2011, 05:50:34 AM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for hfmClientMostAll is success
(Dec 23, 2011, 05:50:36 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Started installing hfm_webapp
(Dec 23, 2011, 05:52:30 AM), com.hyperion.install.action.impl.AssemblyMessageHandler, INFO, Finished installing hfm_webapp
(Dec 23, 2011, 05:52:30 AM), com.hyperion.install.wizard.impl.InstallableItemsUtil, INFO, Completion status for hfmWebapp is success
(Dec 23, 2011, 05:52:57 AM), com.hyperion.install.action.impl.OUIExecAction, INFO, Skipping Oracle inventory creation on some platforms.
(Dec 23, 2011, 05:53:17 AM), com.hyperion.hit.wizard.Wizard, INFO, Wizard state is:InstallSummaryState
i am trying to install only EPM 11.1.1.1 client components to test in windows 7 Environment
Could any one please help me on this
Thanks in Advance!!
Regards
paraYou should always use official documentation for support details but I am pretty sure Windows 7 support was not available for the EAS client until 11.1.1.3.
http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html -
I am using MS Excel 2010 and i have a template which i am using for my project.
There are fields in the template in one column and in the other column, the user has to feed data for the requested fields. Now the requested fields have explanation for the data requested in the form a box which pops up when you click on the cell to provide
your answer. It's not a comment though.
Now i have changed certain fields and replaced them with new requested field.
Can anyone tell me how i change the description in the other column where the user will input his data according to the new requested data, since the description is still showing for the old field.
The Description of the Field comes up in the form of an answer box below the cell where the user has to input his answer and i am not able to change it. It's not a comment though.
Appreciate your reply
Pallab ChakrabortyI suspect it is Data Validation with an Input Message.
Select a cell.
On the Data tab of the ribbon, click Data Validation.
Leave the Settings tab of the dialog unchanged, and activate the Input Message tab.
You can view / edit the message here.
Regards, Hans Vogelaar (http://www.eileenslounge.com) -
I have a Dec 2011 MBP..while its been fine more a less, off late niggling issues have been cropping up.
a) The area around the trackpad heats up tremendously and its more than uncomfortable, could this be due to the power from the adapter?
b) Inspite of clicking the 'automatically illuminate keyboard in low light' the backlit does not seem to work.
Any ideas?b)
-
Issues with MBP C2D and networks with any PCs attached...
So for a long time any time I go to anyone's home with a wireless network, I will jump on and the network will stop working for anyone but me. This happened recently when my girlfriend updated from a netgear that broke to a Linksys wrt54gs. Any time I connect my MBP C2D to it wirelessly I know out the rest of the house, 2 desktop PCs. I also have this problem at my store where it affects the people working around me, so that they cannot connect to the net, which is a BIG hinderance to them, obviously. I had this problem with my wrt54g and changed the firmware to one noted somewhere else (different forum) and it works fine, PS3, and everything connected works perfectly. I am almost to the point of buying a PC so I stop knocking out peoples networks, any thoughts on this, I don't want to have to go back to a PC
Oh and I am using a WEP 128bit hex and no other security on both networks.I had similar problems with a WRT54G Linksys Router, and after a bunch of searching, I found that there is a problem with the latest firmware on the router. I downgraded the firmware as the post recommended (Linksys Forum) and now all my macs can connect.
Here's a link to the post I found on the Linksys site that solved my problems:
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&messag e.id=10007#M10007 -
Anybody else had recurring issues with MBPs of less than a year old?
Both my son and I bought MBPs less than a year ago, and we've both had two faults develope which were repaired by the store (not Apple) where they were bought. My son's MBP has developed yet another fault, and frankly, I'm fed up of traipsing up and down from one end of our town to the other, waiting 3 or 4 weeks for the repair to be done, only to find that in another 3 months another fault is occuring.
The Apple expert in the store suggested that there might have been a batch issue, as both of our MBPs came from the same batch, and advised contacting Apple.
I'd really rather conduct this by email, as I don't have time to spend hanging around on a phone.
Anyone out there give me some (constructive only) suggestions please?Many thanks for your help, I'll try to find time today.
-
Many Issues With MBP Retina Gaming
My MBP Retina 15"
Processor 2.6 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 1024 MB
OSX Version 10.8.2 , build 12C3006
Playing CS:GO is almost impossible .Diablo III same thing... Tried SMC reset , and it gets better but always reverts to crap (>10FPS)
Is there an update coming out to fix this.... This porblem has been going on for quite some time...
Apple you need to get this fixed....
ARGHHHHHHH..Lol ... I posted here to see if anyone had an idea better then The temporary SMC reset .. Also if you think Apple does not review posts on here ... well... I got land in Florida I'd like to sell you ;)
I got this laptop because it should easily run my game .. With the CPU , memory , graphics card it has it should do so easily .. In fact prior to the 10.8.2 update it did .
I read the posts and nothing seems to work yet .. Anyone have and fresh ideas ?
Maybe you are looking for
-
Every time I try to install iTunes i get error message 2329.
Every time I try to install iTunes i get error message 2329. This is really ticking me off and I would appreciate any help.
-
Random speedups & no audio when viewing video?
I've been having this odd occurence with my i5 macbook air 2013 on Mavericks. Sometimes, when I am viewing a video, the video would randomly speed up for a second, then resume to normal speed with no sound. After several seconds, the sound would retu
-
Aperture lost all license and registration info
did a update install....and Aperture will not run....lost all it's registration info
-
Need instructions on how to Defrag my computer - Windows XP.
I don't know how to Defrag my computer. I need instructions.
-
Hi I have a MDX query that takes 30 seconds and I need to speed it up. Any suggestions ? Also any settings to change on the SSAS box ? with set __XLSlice0 as { [Measures].[Summary Pct YearDiff QTD], [Measures].[Summary Pct YearDiff QTD Sailed] } se