HD Memory not showing

Guys, I've finally "upgraded" to Lion (I think it's going to need some getting used to ).
Thing is, when I click on any of my internal HD's the Available Memory is not showing.
I've gone into Finder to see if there's an option in there to check, but there's not.
What have I done wrong?

HDs don't have memory, so I'm a bit confused. Do you mean item info? If so, click on the Desktop J, and select Show Item Info. That adds the capacity and free size values for each mounted volume.

Similar Messages

Installed Memory not showing up in a late 2009 Dual Core Mac Pro

I have a late 2009 Dual Core Mac Pro.
I restarted the my computer today, an a utility popped up saying something about I need to re-arrange the memory in my mac because it was not optimized.
I thought this was weird because all the slots are filled with 2 gigs chips for a total of 16 gigs.
When I checked about this Mac it said I only had 12 gigs of memory in my system.
I went to open up the case, and there are to red light glowing for slots 7 and 8 on the motherboard, and any memory chips I put in those slots do not show up.
Can anyone tell me what is going on and how to fix it.
There was a power outage the other day, but I keep my machine on a surge protector.
I generally try to take really good care of my computers so seeing something wrong out of the blue like this is a little freaky for me.
Any help would be great.
Thanks
Stan

Each "side" is operated independently, so slots 1, 2, 3 and 4 are one set, and 5, 6, 7, and 8 are an independent set. The third and fourth slots on each side share a memory channel, so a failure of one module in these two slots could possibly disable the other one.
The Mac Pro uses the Error Correction Code hardware built into its Xeon processor to provide single-bit (in a word) Error Detection and Correction in Hardware. It also can detect double-bit errors, but these cause a kernel panic, machine-check, error overflow or uncorrected error. This is by design, to avoid poisoning you data.
The Error Correction Code hardware is used in a special way at Startup. Any failure (correctable or not) that occurs in the first few seconds while running the Power-On Self Test causes your Mac to declare the slot(s) of those modules "empty" and simply not use them in the running system. Vigilance is required, because the next time you run this test, those Bad modules may pass.
So the movie version is that you have some DIMM(s) that have failed, and you should remove them from your Mac and consider whether to replace them with good modules, or to add some larger modules.
I expect your recent power failure, protected by a UPS, is merely a coincidence, not a cause-and-effect.

Memory not showing up after crash (1.67)

I have a total of 2GB on my machine. But sometimes when the computer crashed and after force restarting, one memory is not showing up under "About This Mac". It is the reversed one. What does that indicate?
Here're two screenshots:
http://i175.photobucket.com/albums/w130/herpa73229/Picture-1.jpg
http://i175.photobucket.com/albums/w130/herpa73229/Picture-3.jpg
Does it relate to the lower memory slot failure? It will show up 2GB again when I restart the machine again.
I have the latest Powerbook, the 1.67GHz Hi-Res, built around Oct of 05'
Thanks

Could this also be related to that "great deal" you found for RAM last year?
Try putting your original sticks back and see what happens.
Joe

Memory not showing when overclocking

Got a strange one. I have a i7 920 on a MSI X58 pro board. I also have 3 x 2gig apacer 1600mhz DDR matched set. Now everything works fine till i push the base clock up from 133mhz to 166mhz. After that the pc only sees 4gig in post where the BIOS still shows that the DIMM's are full.
Anyone know why this is happening and what the problem could be? BIOS is latest 8.70 version.
Thanks

Quote from: DaLoona on 30-December-09, 17:49:33
Up the voltage of your memory to 1.65V and try again.
Tried it and its still only seeing 4gig of memory in POST. Also raised QPI to 1.25v for some extra breathing space.

T410 memory not showing up

this is a new t410, came with 4 gb memory, but i added another 4 gb memory, yet when i see the properties, the RAM says 4 GB wiith 3.56 GB available.
Can anyone tell me where do i check if all the memory is available or not? or is this a bug?
Any quick help will be very much appreciated.
Sil

danda wrote:
i checked the system parameters, and it says : Installed memory: 4.00 GB(3.80 usable) and system Type: 64 bit Operating system.
I am confused.
In that case I think probably the RAM hasn't been properly installed, have you tried reinserting it? Do it this time while watching the video or reading the HMM:-
http://www.lenovoservicetraining.com/ion/
http://www-307.ibm.com/pc/support/site.wss/MIGR-74470.html
Pecka wrote:
That is normal. My T410i have 3,86 GB usable out of 4 GB on 64-bit Windows. I think part of the memory is used by the GFX and some other stuff.
danda has 2x4GB RAM = 8GB....
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Mass memory not show after install kasper 9.0 in n...

plz help me

I have checked weblogic download link.
Currently webloigc is only available only for below mentioned platforms:-
1. Windows (32 bit jvm)
2. Linux (32 bit jvm)
3. sun solaris (only SPARC) (32 bit JVM)
There is no generic installer available for weblogic 9.2
Thus what I want is weblogic 9.2 setup for x86 machine.
I have tried to run weblogic 9.2 setup for linux on sun solaris x86.
But it did not run, it also gave error message that some package is missing in /lib/.. folder.....

N97 32gb not show.

please help me,my nokia n97 mass memory not show.

Welcome to Nokia Discussions, suham.
Have you tried connecting the phone to a Windows PC?

My memory card is not showing up on the home screen when i plug it in but it shows the computer found it

my memory card is not showing up on the home screen when i plug it in but it shows the computer found it in system preferences. when i plugged these into a imac back in school it showed up how come its not showing up on my less then 24hr old mac. sorry beginner mac user

Finder > Finder Menu > Finder Preferences (these are not in System Preferences)
The General pane has checkboxes for various devices to show on the Desktop. A memory card is considered an external drive. If you want to see it on the Desktop when it mounts, check the external drives checkbox.

TS1382 I have a ipod classic 160GB and it's not showing any music anymore, but there is still 7GB of memory being used, and I don't have it back up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that

I have a ipod classic 160GB and it's not showing any music anymore, but there is still showing 7GB of memory being used, and I don't have it backed up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that memory or to get it the music back, there is approximately over 1400 songs on it?

What is the memory being used by, is it Other? If it is, that means the iPod can no longer read the music, so it has put it all in "Other".
The usual fix for this is to allow the iPod to Sync with its iTunes Library. If that doesn't work, the next option is to Restore the iPod using the Restore command in iTunes, on the Device/Summary pane.
Unless you are very (very) lucky, I suspect that you are going to have to Restore your iPod. Restoring will remove everything form the iPod and put back onto it only what it finds in your iTunes Library, which you say is currently empty.
If you have to rebuild your Library after this issue, by adding all the music back again, this is going to be hard to hear, but for the future, you may want to consider always having a backup of your library. The easiset way to back the Library up is;
if the Library is small enough, burn it to a DVD, as digital files, not a "music CD".
If your Library is too large for a DVD, buy yourself an external hard drive and copy the Library onto the drive. Remember to update the backup every so often.

My internal drive is NOT showing up in the event library in Final Cut X. I am also getting a "The operation couldn't be completed. Cannot allocate memory" Any ideas? I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8

My internal boot drive is NOT showing up in the Event Library in Final Cut X. My external raid drive is showing up.
I am also getting error message "The operation couldn’t be completed. Cannot allocate memory" when attempting to create a new "event". Any ideas?
If I had a application disk, I would unistall and reinstall FCPX. I am assuming there is a way do do this without a disk - just have not been able to easliy find out how.
I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8
Thanks

Well it did NOT work. Here is a screen capture as FCPX loads showing the drive while it loads. Then when it is loaded, NO drive showing up in the Event Library ( I have turned off the external drive).
ANY ideas . . . . Anybody . . . . APPLE?

Please help!! I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000 photos not showing up. What happened?! Where did all my photos go?!

I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000 photos not showing up. What happened?! Where did all my photos go?!

WOOHOO!!! i finaly fixed the problem. Here is what to do:
Chances are if you did the same thing as me you either have
A) No album names at all for ALL your songs in your library
or
B) Have the same name for every album for ALL your songs in your library.
Here is how to fix it (yah it will take a little work but its worth getting your iPod functioning properly).
Unless you dont want to have to go and actualy set al lthe album names for every song here is what you can do:
Go through to iTunes and arange your songs by Artist name. Click the top song for your first artist, hold Shift and click the last song for that same artist (to multi select all the songs for the artist) go into get info and check the Album box. Copy the name of the artist to the Album box and hit ok.
Now when u update your ipod and go into ur Artists section the actual Artist name should show up instead of the song names.
For some reason having the same album name for all your songs messes up the organization of the iPod.
Hope this helps anyone else that is having the same problem

Memory card files not showing up

hi,
i have a 6230 and i use pc suite, but in mobile phone browser my memory card does not show up. all the other files are there, and the memory card works fine in the phone.
any ideas?

Hi,
If the above doesn't work, please find out what software version your phone has by typing *#0000# into the keypad. If it is an oldish one you might consider a SW upgrade.
SR

Additional Memory not being show in OEL UEK

I recently purchased an additional 8G of memory increasing my system from 16GB to 24GB . The Bios sees it fine , however free does not show it. Here is the pertinent information.
uname -a
3.8.13-26.1.1.el6uek.x86_64 #2 SMP Thu Feb 13 19:42:43 PST 2014 x86_64 x86_64 x86_64 GNU/Linux
free
free
             total       used       free     shared    buffers     cached
Mem:      16392848   13979312    2413536      17848       9176      94976
-/+ buffers/cache:   13875160    2517688
Swap:      8249340     324132    7925208
[root@waco shm]#
cat /proc/meminfo
MemTotal:       16392848 kB
MemFree:         2407452 kB
Buffers:            9260 kB
Cached:            95092 kB
SwapCached:        35832 kB
Active:           467052 kB
Inactive:          60944 kB
Active(anon):     435732 kB
Inactive(anon):     5796 kB
Active(file):      31320 kB
Inactive(file):    55148 kB
Unevictable:         192 kB
Mlocked:             192 kB
SwapTotal:       8249340 kB
SwapFree:        7925208 kB
Dirty:                 0 kB
Writeback:             0 kB
AnonPages:        420320 kB
Mapped:         13044804 kB
Shmem:             17848 kB
Slab:             236172 kB
SReclaimable:      33880 kB
SUnreclaim:       202292 kB
KernelStack:        4312 kB
PageTables:        84948 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:    16445764 kB
Committed_AS:   15072612 kB
VmallocTotal:   34359738367 kB
VmallocUsed:      466924 kB
VmallocChunk:   34359163728 kB
HardwareCorrupted:     0 kB
HugePages_Total:       0
HugePages_Free:        0
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       2048 kB
DirectMap4k:       16380 kB
DirectMap2M:     3104768 kB
DirectMap1G:    13631488 kB
dmiedcode
dmidecode --type memory
# dmidecode 2.12
# SMBIOS entry point at 0x000f04c0
SMBIOS 2.7 present.
Handle 0x0008, DMI type 5, 24 bytes
Memory Controller Information
        Error Detecting Method: 64-bit ECC
        Error Correcting Capabilities:
                None
        Supported Interleave: One-way Interleave
        Current Interleave: One-way Interleave
        Maximum Memory Module Size: 2048 MB
        Maximum Total Memory Size: 8192 MB
        Supported Speeds:
                70 ns
                60 ns
        Supported Memory Types:
                DIMM
                SDRAM
        Memory Module Voltage: 3.3 V
        Associated Memory Slots: 4
                0x0009
                0x000A
                0x000B
                0x000C
        Enabled Error Correcting Capabilities:
                None
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
        Socket Designation: DIMM0
        Bank Connections: 0 1
        Current Speed: 60 ns
        Type: DIMM SDRAM
        Installed Size: 536870912 MB (Single-bank Connection)
        Enabled Size: 536870912 MB (Single-bank Connection)
        Error Status: OK
Handle 0x000A, DMI type 6, 12 bytes
Memory Module Information
        Socket Designation: DIMM1
        Bank Connections: 2 3
        Current Speed: 60 ns
        Type: DIMM SDRAM
        Installed Size: 536870912 MB (Single-bank Connection)
        Enabled Size: 536870912 MB (Single-bank Connection)
        Error Status: OK
Handle 0x000B, DMI type 6, 12 bytes
Memory Module Information
        Socket Designation: DIMM2
        Bank Connections: 4 5
        Current Speed: 60 ns
        Type: DIMM SDRAM
        Installed Size: 536870912 MB (Single-bank Connection)
        Enabled Size: 536870912 MB (Single-bank Connection)
        Error Status: OK
Handle 0x000C, DMI type 6, 12 bytes
Memory Module Information
        Socket Designation: DIMM3
        Bank Connections: 6 7
        Current Speed: 60 ns
        Type: DIMM SDRAM
        Installed Size: 536870912 MB (Single-bank Connection)
        Enabled Size: 536870912 MB (Single-bank Connection)
        Error Status: OK
Handle 0x002C, DMI type 16, 23 bytes
Physical Memory Array
        Location: System Board Or Motherboard
        Use: System Memory
        Error Correction Type: None
        Maximum Capacity: 32 GB
        Error Information Handle: Not Provided
        Number Of Devices: 4
Handle 0x002E, DMI type 17, 34 bytes
Memory Device
        Array Handle: 0x002C
        Error Information Handle: Not Provided
        Total Width: 64 bits
        Data Width: 64 bits
        Size: 8192 MB
        Form Factor: DIMM
        Set: None
        Locator: Node0_Dimm0
        Bank Locator: Node0_Bank0
        Type: DDR3
        Type Detail: Synchronous Unbuffered (Unregistered)
        Speed: 800 MHz
        Manufacturer: Undefined
        Serial Number: 00000000
        Asset Tag: Dimm0_AssetTag
        Part Number: 1600 CL10 Ser
        Rank: 2
        Configured Clock Speed: 800 MHz
Handle 0x0030, DMI type 17, 34 bytes
Memory Device
        Array Handle: 0x002C
        Error Information Handle: Not Provided
        Total Width: Unknown
        Data Width: 64 bits
        Size: No Module Installed
        Form Factor: DIMM
        Set: None
        Locator: Node0_Dimm1
        Bank Locator: Node0_Bank0
        Type: Unknown
        Type Detail: Synchronous
        Speed: Unknown
        Manufacturer: Dimm1_Manufacturer
        Serial Number: Dimm1_SerNum
        Asset Tag: Dimm1_AssetTag
        Part Number: Dimm1_PartNum
        Rank: Unknown
        Configured Clock Speed: Unknown
Handle 0x0032, DMI type 17, 34 bytes
Memory Device
        Array Handle: 0x002C
        Error Information Handle: Not Provided
        Total Width: 64 bits
        Data Width: 64 bits
        Size: 8192 MB
        Form Factor: DIMM
        Set: None
        Locator: Node0_Dimm2
        Bank Locator: Node0_Bank0
        Type: DDR3
        Type Detail: Synchronous Unbuffered (Unregistered)
        Speed: 800 MHz
        Manufacturer: Undefined
        Serial Number: 00000000
        Asset Tag: Dimm2_AssetTag
        Part Number: PSD38G16002
        Rank: 2
        Configured Clock Speed: 800 MHz
Handle 0x0034, DMI type 17, 34 bytes
Memory Device
        Array Handle: 0x002C
        Error Information Handle: Not Provided
        Total Width: 64 bits
        Data Width: 64 bits
        Size: 8192 MB
        Form Factor: DIMM
        Set: None
        Locator: Node0_Dimm3
        Bank Locator: Node0_Bank0
        Type: DDR3
        Type Detail: Synchronous Unbuffered (Unregistered)
        Speed: 800 MHz
        Manufacturer: Undefined
        Serial Number: 00000000
        Asset Tag: Dimm3_AssetTag
        Part Number: PSD38G16002
        Rank: 2
        Configured Clock Speed: 800 MHz

Please show the content of:
/proc/cmdline
/var/log/dmesg
so we can tell what the kernel is seeing at boot time.

Laptop computer HP Pavillion dv7 does not show sd memory card

I put my 16 GB SDHC class 10 new memory card into my laptop memory card slot reader
but the computer does not even show an icon for the memory card slot reader. When I pushed the card all the way in
my Kaspersy Virus software asked me if I wanted to scan the new memory card. So it was recognised by Kaspersy.
What to do? I am trying to download a firmware upgrade for a camera I own. I have dowloaded the firmware but cannot tranfer the file because the computer is not showing an icon for the memory card.

Formatting in post #2 was removed. Reposting: Further details added as found: Selecting Device Manager | View | Devices by Connection and browsing down the tree shows: dv7-3060us -- ACPI x64-based PC ---- Microsoft ACPI-Compliant System -------- AMD PCI Express (3GIO) Filter Driver ---------- PCI Standard PCI-to-PCI Bridge 1394 ------------ OHCI Compliant Host Controller ------------ JMB38X MS Host Controller ------------ JMB38X SD Host Controller ------------ JMB38X SD/MMC Host Controller ------------ JMB38X xD Host Controller Examining details on above shows this: Device Class GUID {4d36e970-e325-11ce-bfc1-08002be10318} PCI bus 10, device 0, function 3 Any troubleshooting hints? Could a connector worked loose from the motherboard?

Memory card in Nokia 7373 not showing

I have had a memory card in my nokia 7373 for some time and all has been fine. However, recently my daughter had the phone and someone pinched the sim card and it was dropped on the floor. Now no memory cards will work in the phone. I have put it in the pc and all the ringtones etc are still there, i have even bought a brand new memory card but it just will not show up at all.
Can anyone help at all????
Cheers

If no cards will work then the phone must have been damaged when it was dropped.
A nokia care point may be able to help you.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

HD Memory not showing

Similar Messages

Maybe you are looking for