HD Meter on Logic transport spikes into the red
I notice that whenever I am mastering a track within Logic in bounce mode the "HD" meter sporadically spikes into the red. Although most of the time there are no audible effects a while back I started getting static when the HD meter was spiking.
I find this odd since I'm not running any other audio tracks or plug ins.
So it only seems to happen during bouncing. I bounce in real time because I read once that you will get better audio quality results if you have a higher grade audio interface vs. using the Mac's internal processor.
Hopefully this doesn't mean something is wrong with my Mac Pro. It's only about a year old.
Thanks for any suggestions.
The disk meter is responding because you are writing to disk.
Disk writes are buffered, so their will be little packets of activity, rather than one long write. I don't think there is anything to worry about.
Similar Messages
-
The Levels bar into the red after normalization
Sorry if this is a daft question, I am new to home recording and need to submit my audio via specific guidelines. I'm trying to get into audiobook production. I have a strong theatrical background but i don't know much about mastering audio so this has been challenging...
In the raw file, the levels were primarily in green, occasionally in yellow.
I used "match volume" to get my RMS to a certain level. Then I used a limiter to set to -3 db.
Now the file goes into the red. According to Amplitude statistics. there are 0 "possibly clipped samples" so why then do the levels keep going into Red? I thought that was indicative of clipping?
That's my first question, my second is does anyone know of any basic audio mastering classes for voiceover using Adobe Audition? Less about how to edit audio, more about anatomy of audio files and the meaning of each of these parameters and how they relate to one another.Thanks for your response. I probably did a terrible job of explaining.
I did originally try the "normalize" option and then the limiter but my RMS stats were too high to submit the audio book. They recommend normalizing peaks at -6db, I found this video which states that you can normalize via RMS levels by match volume: How to Normalize Audio Peak and RMS in Adobe Audition CS 5.5 Tutorial - Normalization - YouTube which I thought would at least bring that RMS number down so I was within their required range. It did so all my amplitude specs meet their specs now but I'm just a little perplexed by the red in the level bar.
This is all very new to me and I need to educated myself. I don't even really understand the difference between normalization and compression and why one is favored over the other. This is all really kind of over my head. I think I can learn it but I need someone to explain it to my in layman's terms.
When I do a raw recording, my Total RMS is always way over the recommended RMS the audiobook production company suggests a pre-mastered file should have. Lowering the gain makes the peak amplitude too low. That should be at -12 max while the RMS should be no greater than -28. RMS is around -40. So in a sorta related question, while recording, how do i lower my RMS without killing the peak amplitude. -
Uploading Meter data into the system
Can some one please describe the process of uploading the meter data into CC&B.
What is the content of the flat file that i upload.can i upload a meter read XML file directly into the staging tables.....kindly explain the steps..I have not been able to upload any daat into the system using staging control and staging upload page.
Also i found out that there are batch process MUP1 and MUP2 which need be rum in order to upload the meter data into the system from the meter read staging table.Is this correct.
With regards to the meter upload staging table, i referred to the MR staging table : CI_MR_STAGE_UP
there is some data available with the installation as demo data.
For column MR_UP_STATUS_FLAG, there are values such as E, P, C...I unsersatnd there meaning.
1) For Pending P status, i submitted the batch processes MUP1 and then MUP2, expecting that teh status might change to Complete, c.......at the same time i ran MRUP-PRG ........well i was going to write nothing happened , but i saw that after some time all teh rows with ataus P and C are not present any more..........
2)How do i rectify the data with E status.........
Please helpp me uploading more data to the CI_MR_STAGE_UP Meter read staging table.Hi,
thanks for the reply..
can u please tell me what is the content of the flat file that i upload.can i upload a meter read XML file directly into the staging tables.....kindly explain the steps..I have not been able to upload any daat into the system using staging control and staging upload page.
if u can give a flat file sample content for the meter read.
Also is it advisable to insert data into upload staging table through SQL drectly.
And can u pls tell me the difference between XAI upload staging table and other upload staging table such as for MR, FA etc. -
I'm new to Logic Pro X and can't work out how to record my voice over existing tracks without them playing over the speaker. I'm using a Sure mike through an audio interface and have headphones plugged into the interface?
Hi Kevin, what kind of audio interface do you have?
-
My 12" powerbook logics card crashed. I have a 17". How do I retrieve my internet bookmarks from the 12" by putting it into Target mode on the 12" and looking into the hard drive on the 12"? Where on the 12" hard drive do I go to search for them?
If the 12's logic board is trashed, I don't think you can get into FireWire Target Disk Mode. The computer has to start to get to FWTDM. Will it starte and run at all?
If it won;t start, you will have to go inside and extract the hard drive. Then get this gadget:
Newer Technology Universal Drive Adapter USB 3.0/2.0 - connects any 2.5", 3.5" or 5.25" drive
It allows you to connect a bare drive to another computer that has USB. It will act just like an external disk drive. Assuming the 12's drive is not damaged due to the LB failure, you can retrieve files quickly. -
How to transport the DATABASE TABLE into the Test system ?
Hi Experts,
I am working on BI7, I had created Database table in BDV system using SE11. Tech_name is ZGLACC_TEMP. I had activated it. I had used this database table for the purpose of writing the start routine in the transformation. while I am transporting the transformations to the test system, It is showing as syntax error in ABAP program,
In BDV system there are no syntax errors. it is working fine,
So now I have to transport the database table to test system so that I can transport the transformations into Test system without any error.
Kindly anyone can give the answer , it will be appreciate and points will be assigned.
thanks
sekharHi Sekhar,
Go to SE11, go into the change mode of your table and change the Object Directory entry (Goto -> Object Directory Entry) to some valid package (other than $tmp). Then it will ask for a transport request. Give a transport request and then I believe you know what to do with that transport.
Another thing to keep in mind ... transport all the data elements and domains you have created for this table. Change their Object Directory Entry and assign them to the same transport request.
Best regards,
Kazmi -
Consolidating ALL third party files into the Logic project.
Does anyone know if there is a way to do this?
Kontakt samplers, custom patches of 3rd party synths never save into the Logic Project.
Is there a way to get them to consolidate into the Project Folder?
I constantly find ive lost files, need to re-link them or get lost with locations.
If there was a way to simplify this it would be great.
Any ideas?- Put the jar file on a location you want (the location must be the same for all developers).
- Select the "Libraries" node of your project.
- Press the right mouse button to bring up the popup menu and choose "Add JAR / Folder..."
- Locate and select the JAR file you need and press OK.
- Now you have included it into your project. -
Does Pr embed any meta data into the finished (exported) files?
I'm worried that it embeds my name, username or something like that into the finished movie files intended for distribution/playback. Is this the case?
If not, does it embed any kind of meta data? Perhaps that it was made with Premiere? Photoshop seems to add that to every file.Many formats do not support MetaData, so depending on your chosen format, it is probably not even possible. Then, even where it is, such as WMV's and DRM, PrPro will not do that without direct input from you, and might not even be able to do that, if you wished.
Good luck,
Hunt
@ Joe,
Glad that it does not embed my arrest record (see Video Lounge thread: http://forums.adobe.com/thread/1167864?tstart=0 )...
Hunt -
While performing a system maintenance task we came across this Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))
Can someone help us in resolving this
Thanks and regards
RSPlease expand the log also please check the SAP note 1835436
Regards
Aneesh -
Update the data into the ZTABLE fields thru program logic ..?
hi all,
i have ZTABLE1,ZTABLE2,ZTABLE3, and this tables like ALV grids using object methods.
in the same table fields now i wanted to update the data into the ZTABLE fields thru program logic .
could anyone please help me ....
please provide if anyone of have any program logic that would be helpfull to me.
thanks in advance...
srinivas....Hi Srinivas,
The following statements are used to upload the data into custom tables.
1. Modify
2. Update
3. Insert
if you are using OO ALV, you should enable the 'SAVE' button in the main toolbar. if the user press the save button, then you should upload the data to the custom table.
please find the example code, in this example 'PERFORM F_SAVE_DATA'(here i gave the message only, you write your own logic here) is used to save the data in custom table.
Report Program: ZB_ALVOOPS_TEST
Line:-----
REPORT ZB_ALVOOPS_TEST MESSAGE-ID ZCR_MESSAGES.
Top Include - Global Data Declaration *
INCLUDE ZB_ALVOOPS_TEST_TOP.
SEL Include - Selection Screen *
INCLUDE ZB_ALVOOPS_TEST_SEL.
AT SELECTION SCREEN *
Initialization Event *
INITIALIZATION.
Initialize Screen Number.
PERFORM F_INITIALIZE.
Initialize Field Catalog for ALV Grid.
PERFORM F_INITIALIZE_GRID.
END-OF-SELECTION.
Call Display Screen *
CALL SCREEN 9000.
Event Handler - Class Definition and Implementation *
INCLUDE ZB_ALVOOPS_TEST_CL01.
PBO Event - Module Implementation *
INCLUDE ZB_ALVOOPS_TEST_PBO.
PAI Event - Module Implementation *
INCLUDE ZB_ALVOOPS_TEST_PAI.
Subroutine Include *
INCLUDE ZB_ALVOOPS_TEST_F01.
Include: ZB_ALVOOPS_TEST_TOP
Line:-------
Type Declaration For Internal Tables *
Collection Data
TYPES: BEGIN OF TY_MARA ,
MATNR TYPE MATNR , " Material
VPSTA TYPE VPSTA , " Maintenance status of complete material
MTART TYPE MTART , " Material Type
MBRSH TYPE MBRSH , " Industry Sector
MATKL TYPE MATKL , " Material Group
BISMT TYPE BISMT , " Old material number
MEINS TYPE MEINS , " Base Unit of Measure
BSTME TYPE BSTME , " Order unit
BRGEW TYPE BRGEW , " Gross weight
MAKTX TYPE MAKTX , " Material Description
ROWCOLOR TYPE CHAR4 , " Row Color
END OF TY_MARA .
Flag *
DATA: FG_REFRESH TYPE XFLD , " Used to Refresh ALV
FG_SAVE TYPE XFLD . " Data Saved Or Not.
Internal Table Declaration *
DATA: IT_MARA TYPE STANDARD TABLE OF TY_MARA , " Internal table for Material
WA_MARA TYPE TY_MARA . " Workarea for Material
Variable Declaration For General Constants *
CONSTANTS: C_SCREEN_SELECT TYPE SYDYNNR VALUE '9001' , " Selection Screen Number
C_SCREEN_SELECT_NIL TYPE SYDYNNR VALUE '9002' , " Empty Screen Number
C_STATUS9000 TYPE CHAR10 VALUE 'STATUS9000' , " PF-Status
C_TITLEBAR TYPE CHAR4 VALUE '9000' , " Title Bar
C_ISSUE_CONTAINER TYPE SCRFNAME VALUE 'WORKCONTAINER', " Container Name (Screen Painter)
C_BUTTON_TYPE TYPE CHAR1 VALUE '3' , " Button Type
C_EXECUTE TYPE CHAR4 VALUE 'SELE' , " Functions 'SELE' -> Execute
C_BACK TYPE CHAR4 VALUE 'BACK' , " Functions 'BACK' -> Back to main screen
C_ENTER TYPE CHAR5 VALUE 'ENTER' , " Functions 'ENTER' -> No Action
C_SEL01 TYPE CHAR5 VALUE 'SEL01' , " Functions 'SEL01' -> Toggle Function
C_SAVE TYPE CHAR4 VALUE 'SAVE' , " Functions 'SAVE' -> Save Function
C_REFRESH TYPE CHAR7 VALUE 'REFRESH' , " Functions 'REFRESH' -> Clear and Fres All objects
C_ADD_MI TYPE CHAR6 VALUE 'ADD_MI' , " Functions 'ADD_MI' -> Add New Media Issue
C_TRUE TYPE CHAR1 VALUE 'X' , " Set X value
C_REQUIRED TYPE CHAR1 VALUE '1' , " Un-Confirmed Qty field obligatory or not.
C_INPUT TYPE CHAR1 VALUE '0' , " Reason field should not be input.
C_ALV_SAVE TYPE CHAR1 VALUE 'A' , " ALV
C_ERROR TYPE CHAR1 VALUE 'E' , " Error Type
C_SIGN TYPE CHAR1 VALUE 'I' , " Sign
C_OPTION TYPE CHAR2 VALUE 'EQ' , " Option.
C_COMMIT_WAIT TYPE CHAR1 VALUE '5' , " Waiting to update in DB
C_TABNAME TYPE CHAR1 VALUE '1' , " Parameter (ALV)
C_CANCEL TYPE CHAR1 VALUE 'N' , " Cancel
C_YES TYPE CHAR1 VALUE 'J' . " Yes.
Variable Declaration For Container and ALV Grid *
DATA: OBJ_CUST_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER , " Container Class
OBJ_CUST_GRID TYPE REF TO CL_GUI_ALV_GRID . " ALV Grid Class
Field Catalog Declaration For Container and ALV Grid *
DATA: IT_FIELDCAT TYPE LVC_T_FCAT , " Field Catalog
IT_EXCLUDE TYPE UI_FUNCTIONS , " Standard Function Exclude from ALV
WA_FIELDCAT TYPE LVC_S_FCAT , " For Field Catalog
WA_LAYOUT TYPE LVC_S_LAYO . " ALV Layout
Global Variable Declaration *
DATA: OK_CODE TYPE SY-UCOMM , " OK CODE ( Screen Attribute Don't Change the var.name)
G_SAVE_CODE TYPE SY-UCOMM , " OK CODE
G_ANSWER TYPE CHAR1 , " OK or Cancel.
G_SELECTION_DYNNR TYPE SYDYNNR , " Screen Number
G_ERROR_TEXT TYPE CHAR128 , " Error Text
G_SELECTION_TOGGLE_TEXT TYPE CHAR50 , " Toggle Text, Value: Hide Selection, Show Selection
G_MATNR TYPE MATNR , " Material
G_SMATNR TYPE MATNR , " Material
G_SMTART TYPE MTART . " Material Type
Include: ZB_ALVOOPS_TEST_SEL
Line:-------
Selection Screen
SELECTION-SCREEN BEGIN OF SCREEN 9001 AS SUBSCREEN .
SELECTION-SCREEN BEGIN OF BLOCK SELECTION WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_MATNR FOR G_SMATNR , " Material
S_MTART FOR G_SMTART . " Material Type
SELECTION-SCREEN END OF BLOCK SELECTION .
SELECTION-SCREEN END OF SCREEN 9001 .
Empty Selection
SELECTION-SCREEN BEGIN OF SCREEN 9002 AS SUBSCREEN .
SELECTION-SCREEN BEGIN OF BLOCK SELECTION_NIL WITH FRAME TITLE TEXT-002 .
Nil
SELECTION-SCREEN END OF BLOCK SELECTION_NIL .
SELECTION-SCREEN END OF SCREEN 9002 .
Include: ZB_ALVOOPS_TEST_CL01
Line:-------
CLASS lcl_event_handler DEFINITION *
Event Handler Class Definition *
CLASS LCL_EVENT_HANDLER DEFINITION.
PUBLIC SECTION.
METHODS:
HANDLER_TOOLBAR FOR EVENT TOOLBAR OF CL_GUI_ALV_GRID
IMPORTING E_OBJECT E_INTERACTIVE ,
HANDLER_USER_COMMAND FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
IMPORTING E_UCOMM .
ENDCLASS. "lcl_event_handler DEFINITION
CLASS lcl_event_handler IMPLEMENTATION *
Event Class Implementation. *
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
Toolbar -----Create 'Add Issue' button
METHOD HANDLER_TOOLBAR.
DATA: L_WA_TOOLBAR TYPE STB_BUTTON. " Toolbar
CLEAR: L_WA_TOOLBAR.
Button Type
L_WA_TOOLBAR-BUTN_TYPE = C_BUTTON_TYPE . " 3.
APPEND L_WA_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
Add Issue Button.
CLEAR: L_WA_TOOLBAR.
L_WA_TOOLBAR-FUNCTION = 'ADD_MI' . " 'ADD_MI' .
L_WA_TOOLBAR-ICON = 'ICON_CREATE'.
L_WA_TOOLBAR-QUICKINFO = 'CREATE' . " 'Add Issue'.
L_WA_TOOLBAR-TEXT = 'CREATE' . " 'Add Issue'.
L_WA_TOOLBAR-DISABLED = ''.
APPEND L_WA_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
CLEAR: L_WA_TOOLBAR.
ENDMETHOD. "handler_toolbar
User Actions Events-- Handle 'Add Issue' Button Click.
METHOD HANDLER_USER_COMMAND.
CASE E_UCOMM.
Add Issue Button.
WHEN C_ADD_MI.
IF NOT G_MATNR IS INITIAL.
FG_REFRESH = C_TRUE.
PERFORM F_ADD_MEDIAISSUE.
ENDIF.
ENDCASE.
Refresh Control
CALL METHOD CL_GUI_CFW=>FLUSH
EXCEPTIONS
CNTL_SYSTEM_ERROR = 1
CNTL_ERROR = 2
OTHERS = 3.
Handle Exceptions
IF SY-SUBRC <> 0.
CASE SY-SUBRC.
WHEN 1.
G_ERROR_TEXT = TEXT-026. " 'Control System Error'.
WHEN 2.
G_ERROR_TEXT = TEXT-027. " 'Control CL_GUI_CFW Has Raised Error'.
ENDCASE.
MESSAGE G_ERROR_TEXT TYPE 'E'.
ENDIF.
Refresh Alv Grid.
PERFORM F_REFRESH_GRID.
ENDMETHOD. "handler_user_command
ENDCLASS. "lcl_event_handler IMPLEMENTATION
Object Ref. Event Class.
DATA: OBJ_EVENT_HANDLER TYPE REF TO LCL_EVENT_HANDLER.
Include: ZB_ALVOOPS_TEST_PBO
Line:----
Module STATUS_9000 OUTPUT *
Set PF-Status *
MODULE STATUS_9000 OUTPUT.
PF Status
SET PF-STATUS C_STATUS9000 .
SET TITLEBAR C_TITLEBAR .
ENDMODULE. " STATUS_9000 OUTPUT
Module Create_Alvgrid OUTPUT *
Create Or Refresh ALV Grid *
MODULE CREATE_ALVGRID OUTPUT.
PERFORM F_PROCESS_ALV .
PERFORM F_REFRESH_GRID.
ENDMODULE. " create_alvgrid OUTPUT
Include: ZB_ALVOOPS_TEST_PAI
Line:----
Module exit_command INPUT *
Exit Command ( Cancel and Exit ) *
MODULE EXIT_COMMAND INPUT.
LEAVE PROGRAM.
ENDMODULE. " exit_command INPUT
Module user_command_9000 INPUT *
User Command - Process toolbar Events *
MODULE USER_COMMAND_9000 INPUT.
Take an Action based on user Input
G_SAVE_CODE = OK_CODE.
CLEAR OK_CODE.
CASE G_SAVE_CODE.
Back
WHEN C_BACK .
Raise the Confirmation Message When User not saved the data.
IF FG_SAVE = C_YES.
PERFORM F_EXITCHECK CHANGING G_ANSWER .
IF G_ANSWER = C_YES.
PERFORM F_SAVE_DATA.
ELSE.
CLEAR G_SAVE_CODE.
ENDIF.
CLEAR: FG_SAVE.
ENDIF.
LEAVE PROGRAM.
Enter
WHEN C_ENTER.
Execute ( F8 )
WHEN C_EXECUTE .
IF IT_MARA IS INITIAL.
PERFORM F_SELECTMATERIAL.
ENDIF.
Toggle Button
WHEN C_SEL01.
PERFORM F_TOGGLE_SELECTION_SCREEN. " USING ok_code.
SAVE ( CTRL+S )
WHEN C_SAVE.
IF NOT G_MATNR IS INITIAL.
PERFORM F_SAVE_DATA.
CLEAR: G_MATNR.
ENDIF.
New Entry ( CTRL+F1 )
WHEN C_REFRESH.
PERFORM F_REFRESH_DATA.
ENDCASE.
ENDMODULE. " user_command_9000 INPUT
Include: ZB_ALVOOPS_TEST_F01
Line:----
Form f_toggle_selection_screen *
Toggle Function - Hide Selection / Show Selection *
FORM F_TOGGLE_SELECTION_SCREEN.
Toggle Function
IF G_SELECTION_DYNNR = C_SCREEN_SELECT.
G_SELECTION_DYNNR = C_SCREEN_SELECT_NIL.
G_SELECTION_TOGGLE_TEXT = TEXT-902.
ELSE.
G_SELECTION_DYNNR = C_SCREEN_SELECT.
G_SELECTION_TOGGLE_TEXT = TEXT-901.
ENDIF.
ENDFORM. " f_toggle_selection_screen
Form f_initialize
Initialize Screen Number and Text
FORM F_INITIALIZE .
Initialize Screen Number
G_SELECTION_DYNNR = C_SCREEN_SELECT.
G_SELECTION_TOGGLE_TEXT = TEXT-901.
ENDFORM. "f_initialize
Form f_selectmaterial *
FORM F_SELECTMATERIAL .
Select the data from Mara Table
SELECT A~MATNR
A~VPSTA
A~MTART
A~MBRSH
A~MATKL
A~BISMT
A~MEINS
A~BSTME
A~BRGEW
B~MAKTX
INTO TABLE IT_MARA
FROM MARA AS A INNER JOIN MAKT AS B ON AMATNR = BMATNR
WHERE A~MATNR IN S_MATNR
AND A~MTART IN S_MTART
AND B~SPRAS = 'EN'.
IF SY-SUBRC = 0.
FG_REFRESH = C_TRUE.
FG_SAVE = C_YES .
G_MATNR = C_TRUE.
LOOP AT IT_MARA INTO WA_MARA WHERE BRGEW >= 200.
WA_MARA-ROWCOLOR = 'C310'.
MODIFY IT_MARA FROM WA_MARA.
ENDLOOP.
ELSE.
MESSAGE 'No data Found' TYPE 'E'.
ENDIF.
ENDFORM. " f_selectmaterial
Form f_initialize_grid *
Initialize Field Catalog. *
FORM F_INITIALIZE_GRID .
field catalog
PERFORM F_ATTRFCAT USING :
'MATNR' '1' '0' TEXT-005 '15' '0' 'X' ' ' ' ',
'VPSTA' '1' '1' TEXT-006 '15' '0' 'X' ' ' ' ',
'MTART' '1' '2' TEXT-007 '15' '0' ' ' ' ' ' ',
'MBRSH' '1' '3' TEXT-008 '15' '0' ' ' ' ' ' ',
'MATKL' '1' '4' TEXT-009 '15' '0' ' ' 'X' ' ',
'BISMT' '1' '5' TEXT-010 '15' '0' ' ' ' ' ' ',
'MEINS' '1' '6' TEXT-011 '15' '0' ' ' ' ' ' ',
'BSTME' '1' '7' TEXT-012 '15' '0' ' ' ' ' ' ',
'MAKTX' '1' '8' TEXT-013 '15' '0' ' ' ' ' 'C711',
'BRGEW' '1' '9' TEXT-014 '15' '0' ' ' ' ' ' '.
Set Editable Fields in ALV.
PERFORM F_SETEDIT_FIELDS CHANGING IT_FIELDCAT.
ENDFORM. "f_initialize_grid
Form f_setedit_fields *
Set Editable Fields in ALV *
C_IT_FIELDCAT <-- Field Catalog *
FORM F_SETEDIT_FIELDS CHANGING C_IT_FIELDCAT TYPE LVC_T_FCAT.
Local Variable Declaration.
DATA: LS_FIELDCAT LIKE LINE OF C_IT_FIELDCAT. " Field Catalog
Create Editable Fields.
LOOP AT C_IT_FIELDCAT INTO LS_FIELDCAT.
CASE LS_FIELDCAT-FIELDNAME.
WHEN 'BRGEW'.
LS_FIELDCAT-EDIT = C_TRUE.
WHEN 'MAKTX'.
LS_FIELDCAT-EDIT = C_TRUE.
ENDCASE.
MODIFY C_IT_FIELDCAT FROM LS_FIELDCAT.
ENDLOOP.
ENDFORM. " f_setedit_fields
Form f_attrfcat *
Update Field Catalog Internal Table *
U_FIELDNAME --> Field Name *
U_ROW_POS --> Row Position *
U_COL_POS --> Column Position *
U_SELTEXT_L --> Display Column Heading *
U_OUTPUTLEN --> Heading Output Length *
U_DECIMALS_OUT --> Number of decimal places in output *
U_KEY --> Key in ALV Display *
U_FIX --> Existence of fixed values *
FORM F_ATTRFCAT USING
U_FIELDNAME TYPE SLIS_FIELDNAME
U_ROW_POS TYPE SYCUROW
U_COL_POS TYPE SYCUCOL
U_SELTEXT_L TYPE SCRTEXT_L
U_OUTPUTLEN TYPE OUTPUTLEN
U_DECIMALS_OUT TYPE CHAR1
U_KEY TYPE CHAR1
U_FIX TYPE VALEXI
U_COL_COLOR TYPE LVC_EMPHSZ.
Update field catalog.
WA_FIELDCAT-FIELDNAME = U_FIELDNAME.
WA_FIELDCAT-ROW_POS = U_ROW_POS.
WA_FIELDCAT-COL_POS = U_COL_POS.
WA_FIELDCAT-COLTEXT = U_SELTEXT_L.
WA_FIELDCAT-SELTEXT = U_SELTEXT_L.
WA_FIELDCAT-OUTPUTLEN = U_OUTPUTLEN.
WA_FIELDCAT-DECIMALS_O = U_DECIMALS_OUT.
WA_FIELDCAT-KEY = U_KEY.
WA_FIELDCAT-VALEXI = U_FIX.
WA_FIELDCAT-EMPHASIZE = U_COL_COLOR.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "ATTR_FCAT
Form f_refresh_data *
Clear All the objects used in the program ( Data Related ) *
FORM F_REFRESH_DATA .
Clear All the Objects Used in Our Program.
CLEAR: S_MATNR ,
S_MTART ,
IT_MARA ,
OK_CODE ,
FG_REFRESH ,
FG_SAVE ,
G_SAVE_CODE ,
G_MATNR .
FREE: S_MATNR ,
S_MTART ,
IT_MARA ,
OK_CODE ,
FG_REFRESH ,
FG_SAVE ,
G_SAVE_CODE ,
G_MATNR .
Refresh Alv.
FG_REFRESH = C_TRUE.
ENDFORM. " f_refresh_data
Form f_process_alv *
1. Create Custom Container *
2. Create ALV Grid *
3. Exclude Standard Functions *
4. Display the ALV *
5. Register the Events. *
FORM F_PROCESS_ALV .
Display ALV
Custom Container
IF OBJ_CUST_CONTAINER IS INITIAL.
CREATE OBJECT OBJ_CUST_CONTAINER
EXPORTING
CONTAINER_NAME = C_ISSUE_CONTAINER.
ALV Grid
IF OBJ_CUST_GRID IS INITIAL.
CREATE OBJECT OBJ_CUST_GRID
EXPORTING
I_PARENT = OBJ_CUST_CONTAINER.
ENDIF.
Exclude Standard Functions
PERFORM F_EXCLUDETOOLBAR USING OBJ_CUST_GRID
CHANGING IT_EXCLUDE.
Layout.
WA_LAYOUT-CWIDTH_OPT = C_TRUE.
WA_LAYOUT-INFO_FNAME = 'ROWCOLOR'.
ALV Grid Display
CALL METHOD OBJ_CUST_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = WA_LAYOUT
IT_TOOLBAR_EXCLUDING = IT_EXCLUDE
I_SAVE = C_ALV_SAVE
CHANGING
IT_FIELDCATALOG = IT_FIELDCAT[]
IT_OUTTAB = IT_MARA.
ENDIF.
Register Editable ALV Events
CALL METHOD OBJ_CUST_GRID->REGISTER_EDIT_EVENT
EXPORTING
I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED
EXCEPTIONS
ERROR = 1
OTHERS = 2.
*Create Object for Custom Event Handler Class if the ref. object is
*initial.
IF OBJ_EVENT_HANDLER IS INITIAL.
CREATE OBJECT OBJ_EVENT_HANDLER.
ENDIF.
Register Events
SET HANDLER: OBJ_EVENT_HANDLER->HANDLER_TOOLBAR FOR
OBJ_CUST_GRID,
OBJ_EVENT_HANDLER->HANDLER_USER_COMMAND FOR
OBJ_CUST_GRID.
Set Toolbar
CALL METHOD OBJ_CUST_GRID->SET_TOOLBAR_INTERACTIVE.
ENDFORM. " f_process_alv
Form f_excludetoolbar *
Exclude Standard Functions from ALV *
U_OBJ_CUST_GRID --> Instant for CL_GUI_ALV_GRID *
C_IT_EXCLUDE <-- Internal table for Exclude *
FORM F_EXCLUDETOOLBAR USING U_OBJ_CUST_GRID TYPE REF TO CL_GUI_ALV_GRID
CHANGING C_IT_EXCLUDE TYPE UI_FUNCTIONS.
Exclude Standard Functions
CLEAR: C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_CHECK TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_REFRESH TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_COPY TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_COPY_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_CUT TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_DELETE_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_APPEND_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_INSERT_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_MOVE_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_PASTE TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_PASTE_NEW_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_UNDO TO C_IT_EXCLUDE.
ENDFORM. " f_excludetoolbar
Form f_create_returnrequest *
Create Return Request based on the Work container ( ALV Grid Data) *
FORM F_CREATE_RETURNREQUEST.
Message to save
ENDFORM. " f_create_returnrequest
Form f_add_mediaissue *
Create New Media Issue if the user click 'ADD ISSUE' Button. *
1. Get the Input From User *
2. Get Total Delivery and Return Quantity *
3. Append to Final internal table *
FORM F_ADD_MEDIAISSUE .
Local Variable Declaration.
MESSAGE 'Add Button Clicked' TYPE 'I'.
ENDFORM. " f_add_mediaissue
Form f_refresh_grid *
Refresh ALV Grid *
FORM F_REFRESH_GRID .
Refresh ALV Grid.
IF FG_REFRESH IS NOT INITIAL.
CALL METHOD OBJ_CUST_GRID->REFRESH_TABLE_DISPLAY.
CLEAR: FG_REFRESH.
ENDIF.
ENDFORM. " f_refresh_grid
Form f_getcollectissue *
FORM F_GETCOLLECTISSUE .
Collection Plan Data
ENDFORM. " f_getcollectissue
Form f_perpare_final *
FORM F_PERPARE_FINAL .
Perpare Final Internal table
ENDFORM. " f_perpare_final
Form f_validate_data *
FORM F_VALIDATE_DATA.
Message if any data validation.
ENDFORM. " f_validate_data
Form f_modify_final *
Update Actual Delivery Qty and Return Qty in Final Internal table *
Form f_save_data *
Save the Data When User Click 'Save' Button *
FORM F_SAVE_DATA .
Message
MESSAGE 'Save Button Clicked' TYPE 'I'.
ENDFORM. "f_save_data
Form f_exitcheck *
When User Exit from the Transaction then Raise Confirmation message*
C_ANSWER <-- OK or Cancel. *
FORM F_EXITCHECK CHANGING C_ANSWER TYPE CHAR1.
Security Check.
C_ANSWER = C_CANCEL.
CALL FUNCTION 'POPUP_TO_CONFIRM_DATA_LOSS'
EXPORTING
TITEL = TEXT-039
IMPORTING
ANSWER = C_ANSWER.
ENDFORM. "f_exitcheck
Screen Numer : 9000
Line:------
PROCESS BEFORE OUTPUT.
MODULE STATUS_9000.
CALL SUBSCREEN: SELECTIONSCREEN INCLUDING SY-CPROG G_SELECTION_DYNNR.
MODULE CREATE_ALVGRID.
PROCESS AFTER INPUT.
MODULE EXIT_COMMAND AT EXIT-COMMAND.
CALL SUBSCREEN: SELECTIONSCREEN.
MODULE USER_COMMAND_9000.
pls reward if it is useful -
Is it possible to record parts of a phone call on Skype into Logic, then play back the audio while still on the Skype call? I'm a voice teacher coaching students in other cities, and Skype can't offer any suggestions.
Hi
What I'm saying is:
Make a new MONO audio track (use the + button). Assign it to input 1
Make a second new MONO track, assign it to input 2
Name both tracks, record-enable both tracks, and record.
You could, of course, make both tracks in one go via the new track dialog box, and hav ethem automatically assigned to ascending inputs.
CCT -
How do you move changes from your project developments into the maintenance development system?
Good day colleagues.
We are in the process of introducing retrofit, and the picture is clear for us, generally speaking, to retrofit the project landscape with the changes done in the maintenance landscape.
What about the other way around? We mean, when the project is set to Go Live, we understand the transports will be all added, e.g. to the Production System buffer to be moved there via Maintenance Cycle, based on the way we defined the project and the logical component being used.
However, how do you feed those project transports to your Maintenance Development System using ChaRM? or do you do that Manually? We doubt. Copying Production back into Development? no way !!!
How do you establish that? We have a sort of idea but the documents about retrofit only seem to talk about moving transports one way, as far as we have found.
Many thanks for any feedback.
Juan CarlosHi Piyush.
I apologize for a late close on this questioning about moving projects back into the maintenance stream.
Basically there are 2 solutions as far as we know:
1. What Vivek mentions, which is performing a cutover and repacking the project transports into 2 transports in the maintenance stream: A workbench and a customizing. In that sense, at the end of the day you end up moving just 2 transports to the maintenance stream up to Production. They contain all your project objects. Thanks to Vivek, again.
This is a very practical and interesting approach. The only reason we did not adopt it, is based on the fact that if by any chance we encounter an issue with a project transport object in the maintenance stream (Dev or QA), now that all is bundled together, we may be stuck right at the time weare getting ready to GoLive. How tough is going to be that issue? how easy and quick to fix?how much would that affect the whole project time frame? Those questions made us decide to option 2.
2. What we are doing is that at cutover we move at the same time all project transports to the transport buffer of each of the maintenance stream systems (Dev, QA, and Prod). We first open the gate to move the transports to Dev and we test, then to QA and we test, as well. If there may be an issue, and the issue can not be quickly resolved by the project team, we can go up to the extreme of using a new feature introduced in ChaRM in SP10, if we are not wrong, but definitely available in SP12. That feature provides a way to selectively decide which transports of the release are to Go Live and which ones do not, although we have no had to use that feature, yet, but it is there.
We do not see any risk on adding the transports to the maintenance buffers at the same time. There are ways to control the systems that are open for receiving transports, and the project phases, which guarantees no room for error. There have to be deliberate actions taken (more than one in our case), to wrongly move a project to GoLive before its time comes.
That is more or less the scenario Piyush.
Hope that explains the scenario. So far no decision on really publishing as a blog. It seems not to be written on stone, as consulting with different companies, each adds its own flavor to the recipe and shuffle ideas to get to what they are looking for and makes them happy.
Juan -
No logical sytem found in the drop down under SAP authentication in CMC
Hi Swapna,
This is quite simple. Click on New and enter the following information:
System e.g TS6
Client e.g. 800
Application Server e.g. yourservername
System number e.g. 00
Username e.g. Crystal
Password e.g Password
and Language e.g. EN
Press Update and and go to the Role Import tab. Import your role and don't forget the set the checkbox Enable SAP Authentication under the Options tab when using sap authentication.Hello,
We are trying to integrate existing BO environment in our company with existing BW installation.
BO Environment - 3.1
BW/ECC Environment - (BW - BI 7.0 SP20, ECC 6.0)
So got the pre-requisites completed and the transports imported into both BW and ECC environments. Upon these steps we went ahead and installed the integration kit for 3.1 system.
There were no error messages, after we completed the installation went into infoview and in the authentication drop down checked to see if I can get "SAP" in there....which it did. So, I am assuming there were no issues till this point which we might have missed out.
Upon this, when I went into SAP authentication in CMC and double clicked on SAP and in the next screen clicked on "NEW" and added in the application server, system number, id and password and updated it...this automatically updated the logical system.
But when I go into the role import, it gives me the following error message....
Exception in JSP: /jsp/auth/sapsec_import_role.jsp:22:19:20: <%21:string context.........lot of other message
The only thing is we have not assigned the CRYSTAL_ENTITLEMENT role to it as we are at this point only trying to see if we can log into webi...
Can you please help me out on this.
Thanks
Dharma. -
For the first time in Logic I have just used an outboard midi intrument on a song. How do you route it into the bounce? The only option afforded to to a group, but I can't get any sound feeding through to the bounced mix.
cheersPage 297 of the manual:
Input Object
The Input Object allows you to directly route and control signals from your audio hardware’s input. Once an Audio Input Object is assigned to an audio channel, it can be monitored and recorded directly into Logic, along with its effect plug-ins. The signal is processed—inclusive of plug-ins—even while Logic is stopped. In other words: Input Objects behave just like external hardware processors. Bus sends can be used pre or post-fader.
The Audio Input Objects can effectively replace your old mixing desk, or at least save time while bouncing:
Audio Input Objects make the bouncing procedure much easier, as there’s no longer any need to record the audio signal of your MIDI devices before bouncing (mixing down) their output with the audio recordings. The live Audio Input Objects allow you to mix down the audio signal from your external hardware MIDI synthesizers and sound modules into a stereo mix (by bouncing an Output Object).
The Input Object features the following elements: Inserts, Bus Sends, Output,
Grouping, Automation, Pan, Level, and Level meter, Mute/Solo, Mono/Stereo. -
How can I have multiple inputs into the selector terminal of a case structure
Hi everyone
I have a question on how to wire multiple inputs in to the selector terminal of a case structure.
Currently, I have three switches, each switch determines different case. So if I switch the switch 1 is on, the numeric indicator will show 1. If the switch 2 is on, the numeric indicator will show 2, so on and so forth. However, the selector terminal will not allow me to wire multiply inputs into the case structure, I tried Bundle by Name, Bundle and Array to Cluster, but they did not work. I set the case structure with 3 cases, they are 1, 2 and 3.
Could someone help me please. I have attach an image and the VI of the work I did so far.
I have another question, is there a function which can toggle other switches to off when there is a switch has been toggled on.
Thank you very much
Tommy
Attachments:
Trial - Case Structure.vi 7 KBTommy, attached find a cheeseball way of doing this that has given me a LOT of mileage over the years. IT lends itself nicely to a couple of really good practices that NI recommend, but I have given you the bare-bones to "see under the hood".
The recommended practices:
1. You can make this a nice tight sub-vi where you can put it into a core library of routines that you'll use over the years, even extending the logic to look only for changes, etc.
2. If you are thinking about Front Panel design considerations, you'll want to use arrays of controls where possible, as that's a nice neat way of containerizing your switch for both the FP and Block Diagram.
Have fun. I have TONS of these types of things, so feel free to PM me if you have any other needs.
Wes
Wes Ramm, Cyth UK
CLD, CPLI
Attachments:
Boolean Switch Logic.vi 11 KB
Maybe you are looking for
-
WRT54G Wireless Router & RT31P2 Vonage Router
I've had to guess how to set this up and thought I had everything ok. Phone Connection still works, wireless network is recognized by my wireless laptop, my wired computer still works, but when I try to make the wireless connection from the laptop,
-
How can I have threads communicate with each other?
I'm working on a project that requires a group of classes communicating with each other. I decided on using a server and carrying out communication that way. However, my app only has communication between the client and server. I need the clients to
-
Why can't I upload any pictures to one of my shared photo streams?
I tried to upload my photos to one of my shared photo streams but they never appear there after i post them. i am using the latest software update for iphoto.
-
I forgot my security questions and there no reset to it
apple please help me i need to reset my scurity question or i could not download anything in my iphone 5 please help me
-
i have no contacts on icloud.com. i have changed the option to sync to the cloud on my iphone. do i need to do anything else?