HD monitor suggestion for use with Mac Mini.

Hello Group,
Can anyone suggest the best (or good, compatible) HD monitor to use with my new mac mini just purchased (late 2009 model). Can't afford the apple cinema's so I'm looking for a cheaper option to still have HD using HDMI inputs, looking to spend around $200-$300..also do I need to purchase an adapter of some kind?. Thanks so much for any suggestions!

Although I have no specifics, from various articles I have read
about the condition, a few things stand out.
What seems the most prevelant and makes a lot of sense is
to use a monitor that has a matte finish screen. Glossy screens
regardless how you tweek lighting and viewing positions will always
have some amount background reflection. It can be so low as to
not be conciously perceptible, but the eye is still detecting it and
is trying to correct for it and what is viewed on the screen.
On the subject of lighting, with the wider spread use of CFL
lights could be adding more people to the list with this problem.
The "cycle times" of these can conflict with display refresh times
causing the susceptable persons eyes to get confused. The old
incandescent bulbs had much less of this effect.
Screen refresh rate can also be an issue. With the iMacs and
the Thunderbolt displays as well, these are fixed and cannot be
tweeked, atleast not without third party intervention. With a
Mini and some other third party monitor, adjusting refresh rates
can help.
Environment in general is a major contributor as well.
So, resolving the issue may not be as simple as just getting
a different monitor, although matte screens seem to be a
major help.

Similar Messages

2TB Time Capsule or External Hard Drive for use with Mac MINI and AppleTV

Hi,
My current setup is I have a 1TB Hard Drive linked to my intel Mac Mini via FireWire 400, the Mini shares my music and films through iTunes so that my AppleTV can pick them up.
All devices are connected to an AEBS 802.11n (early model) via Cat6 Gigabit cables.
As I have run out of space and am looking for a bigger drive, I wanted to know if I would be able to use the 2TB Time Capsule to hold my films and be able to stream them to the Mac Mini so that it may stream them through iTunes to the AppleTV.
The theory of if should work, as the devices are all Gigabit capable and connected by high quality Cat6 leads their shouldn't be network bandwith issues, I am just unsure of how quickly the TimeCapsule can read stored data from a hard drive and transmit, some of my films are HD and run 4GB plus.
The obvious answers is just to buy a bigger hard drive with FW400, however I would like to reduce the number of boxes I have under the TV, I plan to upgrade my AEBS to the latest one anyway so just thought it made sense to explore this option.
looking forward to hearing what you have to say.

Hello,
It should work in theory, but the disk access time of the TC is much slower. I was setup like you are with an external drive connected to a Mini via FW and I had true Gigabit transfer between computers.
When my hard drive failed I sold my Linksys gigabit router and bought a TC to reduce the number of boxes, but I soon learned that the read/write speed on a TC is a little bit faster than on a thumb drive! Not that great. All my machines are also connected with Cat6.
It's still OK to watch a movie though, but transferring 10+ Gb is a pain.

Doesn't play songs, "itunes is not configured for use with mac-formatted"??

Hi, new ipod shuffle. Seems to charge fine, all indicator lights function as expected. Everything looks fine in itunes. But it doesn't play songs. I have the most recent versions of itunes and the ipod software. Re-set, updated, and restored, nothing works. Even restored using the restore utility. Re-started computer. Checked for volume control. Won't play songs. Tried different file types. Songs play fine from itunes library and from the device's library within itunes. Tried different headphones. Hooked it up to computer speakers. Turning volume all the way up on device and speakers, heard some very faint rhythmic static, so my guess is the jack socket (or whatever you call it) is just messed up, but it seems weird that it can transfer power and data to the device but doesn't work for sound...
The only other issues that have come up is that the drive disappears in explorer once it syncs with itunes. Other people who've noticed this seem to have completely different problems so I don't think it's related.
Also, I have MacDrive on my computer. And when it starts up with the ipod plugged in, MacDrive offers the message "Itunes is not configured for use with Mac-formatted ipods." It offers to automatically reconfigure itunes so it can read mac-formatted ipods. Since I've restored the device, I don't see why formatting should be an issue so I say "no."
Should I try letting macdrive do its format thing? Should I try formatting the ipod disk on the My Computer menu? Or should I just email apple and tell them the jack's busted?
Thanks for any thoughts!

Well, I have had my iPod for about 3 years, it is a 4th generation non-video 40 GB. One day it just stopped working, and now it does not play any songs. when I turn it on it makes this odd whirring sounds that computers make when they try really hard to do something. I cannot charge it, and it is not recognized by iTunes. Also when I turn it on, I get the apple.com/ipod/support (or whatever it is) screen. Needless to say, my warranty is expired, and so I cannot do anything for it except get a new battery, or buy a new one. Is there any way to fix this problem, or anyone out there who is experiencing the same thing?
I'm having the exact same problem with my wife's iPod. However it will play about 3 seconds of a song and go onto the next song.
If there is anyone out there that can help please do!
Windows XP

Monitor Recommendations for Use with Captivate

Anyone have any monitor recommendations for use with Captivate? Size and resolution?

The formal adobe recommendation is as posted 1024x768 is fine.
But, monitors are not that expensive, so for productivity and better work environment I recommend at least one wide screen 22" with resolution 1600X1200 or more and that supports 1080 for video.
You need the wide screen ( or two monitors) so you can work with all the tools in one view.

Best POS system for use with Mac?

What is the best POS system for use with Mac? Using Quickbooks and paper invoices and inventory. Would like to upgrade to POS system.

Ideally it is best to have seperate (discreet) EHD's for a PC and Mac due to their differences in HD formatting. However, this is not always feasable but there are alternative solutions availble. Among those are:
Creating and useing a Dropbox account that can be shared by PCs, Macs, IOS and Android devices. Dropbox allows for 2GB of free storage and additional storage is available for a small monthly fee.
Another possiblity is formating an EHD so that it may be shared by both a PC and Mac, this format is FAT 32. The downside of doing this is the size of the files written to the HD are limited to 4GB.

Functioning Monitor will not display with Mac Mini

I'm trying to get an IBM E74 CRT monitor working with an early 2009 Mac Mini. I have it connected with Apple's mini-DVI to VGA adapater. The Mac "sees" the monitor since with screen sharing I can see the Display System Preference when the monitor is attached. It shows the monitor as an IBM E74 and allows what appear to be appropriate choices as far as resolution and refresh rate are concerned. I tried many combinations of resolution and refresh rate with no difference in behavior.
The monitor always acts like no signal is detected (built it message on monitor display). This monitor works fine with a B&W G3 and a late 2007 MacBook Pro. Any ideas why the Mac Mini is not driving the monitor? Have tried all combinations cycling power on the monitor, connecting / disconnecting while the Mac Mini is power up. Have had the monitor connected and powered on when booting the Mac Mini. For whatever reason the monitor does not seem to work with the Mac Mini, but works fine with other computers.
The monitor despite its' age has pretty low time on it and is quite serviceable. Are there quirks with the VGA interface that we may be running into? I would like to get this combo working together if at all possible.

I would say the VGA interface did evolve somewhat over that time period. In particular, the thing that may have changed that could be the underlying cause of the problem is sync termination impedance has trended upwards. It's not unusual to find older monitors with low impedance on sync. Some even had 75 ohm impedance, which required a line driver for sync the same as for video.
It could be the IBM monitor has fairly low termination impedance and the mini is unable to provide sufficient output on the sync lines to drive TTL levels, whereas the MBP is doing better. You could check this with a simple ohm meter with the IBM monitor turned off. Ideally, for the mini, you would want to see a high impedance reading on H and V sync, like close to 2k ohms. If it's 500 ohms or less, then the mini may not be able to drive sync properly.
On an old monitor like that, it is likely to have old fashioned components with axial leads rather than surface mount components. If you are handy with a soldering iron, you could find the offending resistors and bring the monitor up to a more modern, high impedance standard of 1.8k to 2.2k.

Switching to AT&T Cingular - best phone for use with Mac and iSync

Dear Friends,
I am finally about to be free from Sprint's poor customer service. I will be switching to AT&T / Cingular. (Not quite ready to buy an iPhone, but don't want to be locked into a 2 year contract with another provider).
I want to use Apple's iSync. I have reviewed the list of compatible devices and scanned the forums for related topics.
I'm still left wondering:
What is the best phone to get with AT&T for use with iSync?
I would like to sync contacts both ways. If possible, syncing cal events and to-dos would be nice, but not as important as contacts.
I prefer small flip phones. I don't plan to buy the Media pack service that includes text, web, etc. Instead, I will use the phone for calls and occassional text messages.
Sound quality and the ease of use are the most important features for me. I prefer raised keys to the flat keypads, but could give on this if need be.
Finally, using the phone as a modem with my laptop would be nice, but is not essential.
Thanks so much for any help you can offer.
David

I am facing the exact same question regarding, e.g., the Nokia 6126. There are several references:
1. Go to the Nova Media web site and look at their new product, Fone Link. Or their iSynch Plugins
2. One of the forum threads references, http://www.macosxhints.com/article.php?story=20060915154526806
3. Another link I found http://soapbox.co.nz/past/2007/4/9/nokia-6126-and-isync-revisited/
But what I don't yet understand is whether or not any of these suggestions/solutions are affected by the carrier. My understanding is that the 6126 is the North America Version of the 6131. But I talked to ATT/Cingular support yesterday and they make some modifications to the phone software. They don't know if the ATT 6126 will synch with a Mac. Of course they know the answer if synching with a PC (!!)

MBA use with Mac Mini

Can I use the Mac Mini as an external cd drive for my MBA?

Connect the computers to the same network, insert a CD in the Mac mini, start File Sharing from the Sharing pane of System Preferences, choose Connect to Server from the Finder's Go menu on the MacBook Air, and log into the Mac mini.
(35587)

Which Display To Use with mac mini?

Is it possible to use an iMac Desktop computer as a display for a mac mini?
Does anyone have the range of different monitors that can be used as a display for the mac mini?
Both answers are crucial to buying a mac mini.
iMac Mac OS X (10.4.5) 600 MHz Power PC G 3 512 MB SDRAM

Not directly. You can of course connect to the mini using remote desktop (included with Mac OS - enable it on the Services tab of Security preference pane) and a free VNC client.
It is not fast and snappy like a directly attached monitor - so you will want to use it ocassionally to make remote changes - not day in and day out display.
Best to get a display that supports DVI input (or HDMI) and meets your budget. Here are the specs... (it will drive VGA as well - but it's no longer a digital signal and generally less nice)
DVI video output to support digital resolutions up to 1920 by 1200 pixels; supports 20-inch Apple Cinema Display and 23-inch Apple Cinema HD Display; supports coherent digital displays up to 154MHz; supports noncoherent digital displays up to 135MHz

I recently purchase macbook air with OS 10.10.2. I want to use my Seagate external backup plus hard drive for time machine back up. How to partition my 1TB Seagate back up plus hard drive for use with mac and windows pc?

Hi All,
I recently purchased 13" Macbook Air with OS 10.10.2. I want to use my 1TB Seagate backup plus external hard drive as time machine and my windows 7 pc. Please suggest a method. Thanks in advance for your reply.

I strongly recommend having an external drive dedicated solely for TimeMachine. You could partition the drive but if something goes wrong you risk losing the data on both partitions. Should you decide to go ahead with splitting the drive for two different uses you’ll need to partition the drive either using the Mac’s built in Disk Utility program or Windows utility. I believe the built in Windows disk utility program will destroy the current partition and erase the data that’s on it - I use a third party Windows disk utility program for partitioning and it allows for non-destructive partitioning but warns to back up data first just in case. Apple’s Disk Utility can do non-destructive partitions but I don’t recall every trying to do a non-destructive partition on a disk originally formatted for Windows using it. Again - back up that data just in case.
Finally, your TimeMachine drive should be at least 1.5 times (I prefer 2 times) the size of the data you expect to be backing up a year or two from now. In other words, if you currently are using 50GB of your computer’s drive but expect to begin purchasing Mac software to replace software on your Windows computer and if you expect to be putting photos, music, and other data on it you might expect that two years from now you’ll have 100GB of stuff on the drive. So a 200GB partition is the smallest size you’d want. TM’s backup scheme keeps multiple copies of data as it changes so the extra room is important for this scheme.

DVI to ADC adapter STudio display will not power on when used with Mac mini

I have a Mac mini and I just purchased a used apple 17" CRT studio display. I bought the DVI to ADC Adapter as recommended by my Apple store. When I hook everything up (I have checked and redone this two times) The power light will come on for about a second when presses. When the mini powers up there is a blank dark screen. I would appreciate any ideas on this. thanks!
Mac mini Mac OS X (10.4.1)

Hi
unfortunately I think the Apple store have sold you the wrong item.
I'm almost certain the DVI to ADC adapter only works with ADC based flat panel displays. DVI ports can output digital or analogue signals (or a combination of the two). The adapter seems to provide digital, which is why it works with the LCD displays, but not analogue, which is why it doesn't work with the CRT displays.
Confusingly Apple did a 17" Studio display both as a CRT and LCD.
Dr. Bott do a similar adapter but they explicitly state it's not compatible with the 17" CRT.
Unfortunately I'm not sure there's a solution, as the display has an ADC connector yet I'm not aware of any adapters available that will work.

75GB IBM HD - use with MAC MINI?

My wonderful old beige G3 MT is never used any more - still only 9.2.2.
It contains a 75GB IBM hard drive (?ATA/IDE).
Could I remove that drive, install it in some kind of case, wipe the disk or reformat so that I could then attach it to my Mac mini (not Intel) as an external HD storage device?
Could the case/HD connect via FW?
Could I even reformat/install OSX 4.8?
Or am I just dreaming.
G3 MT & iMac & Mac mini Mac OS X (10.4.8) Mac mini OSX 10.4.6 & iMac & G3 OS9.2.2

Sure, you can get a firewire external enclosure for your 75 and you can even boot your mini from it, and maybe get a slight speed increase.
But with carefull shopping you could probably pick up a new 300 Gig firewire external for a bit over $100 -- and save yourself a lot of hassle and uncertainty.

Recommendation Request: Best flatbed scanner for use with Mac and iPhoto?

I have a flatbed scanner that Mac doesn't recognize. It's 9 years old, does a great job, but only works with Windows. Period. Don't ask what model or anything, I've already done the research, it's hopeless. MOVING ON... I'm tired of BootCamping to Windows, running scans, and then rebooting and hunting down the files...
So, what flatbed scanner do you use, rank it on scale of 1-10, and how much did it cost?
This thread might be useful to many people... FLATBED scanners, only, please. Make another thread for sheetfed scanners if you like.

This site has some good info on many scanners: Scanner Reviews | Flatbed Scanner |.
I'd look for one with high optical resolution. It's akin to the zoom in digital cameras, optical vs digital. FWIW I use a Canon 8600F (now replace by the 8800F) which does slides, film strips as well a photos. What I like about it is that you can scan multiple photos and have each saved to it's own file. Other brands of scanners offer that as well I'm sure but it'sjust a feature to consider. My scanner also came with a bundled copy of Photoshop Elements for Mac. Not the latest version but worked very well. Its replacement also bundles PSE.

Partitioning previously used Windows NT File System for use with Mac and PC

With reference to this thread I found when searching for a solution: Can Windows NT File System(NTFS) format external hard drive work on iMac?
Below is the comment which led to me creating this new thread.
"rkaufmann87Sep 8, 2014 8:26 AM Re: Can Windows NT File System(NTFS) format external hard drive work on iMac?
in response to djj19
djj19 wrote:
Hi there,
I am about to follow your advice also for the same issue, the worry I have is that when I select partition 1, it says "To erase and partition the selected disk..." and so I am worried that if I do this it will erase the current contents of the hard disk drive (which were copied there from PCs in previous use).
If so, is there a way to use the hard disk drive with a mac without erasing the contents?
Thanks
Your case is different and NO do not partition the EHD yet unless you are prepared to completely erase your PC data. Before progressing though, do you intend to share the EHD with a PC and your Mac? If so this is not advisable but it is possible, however you will need to compromise. Please answer that question first and then we can proceed with some advice.
BTW it's generally not a good idea to ask a question in a thread that has already been answered, particularly one that is 3+ years old! In such a case it's normally better to create your own thread. "
The answer to the question in the above comment is that ideally I would like to use with both Mac and PC, why is this not advisable?
Please discuss my best options. I am wondering if I could transfer the current contents of the disk drive elsewhere, partition (which would erase) the disk drive, then put back the contents along with the new files which I have been trying to put on in the first place?
If this were to work would I then be tied down to only using this disk drive with a Mac?
Thank you.
Message was edited by: djj19

Ideally it is best to have seperate (discreet) EHD's for a PC and Mac due to their differences in HD formatting. However, this is not always feasable but there are alternative solutions availble. Among those are:
Creating and useing a Dropbox account that can be shared by PCs, Macs, IOS and Android devices. Dropbox allows for 2GB of free storage and additional storage is available for a small monthly fee.
Another possiblity is formating an EHD so that it may be shared by both a PC and Mac, this format is FAT 32. The downside of doing this is the size of the files written to the HD are limited to 4GB.

Question about Formatting Buffalo USB 1TB external drive for use with Mac Book Pro Mountain Lion HD

Hi there, Have Mountain Lion HD operating system (not sure if it is 10.8 or 10.8.1. or 10.8.2) and have a Buffalo USB 3.0 1TB hard drive. When go to utilities to try and format with Mac OS extended, following 3 files show. DriveNavi. exe, Slm.exe and Mac. The option to left click and erase menu is not there. Or at least not as shown in all the help videos.
It is USB connection so will take ages but want to use drive to store video footage and also partition to back up Time Machine. ( travelling in South America and no other Ext Drive option available too buy) how much space should i assign to Time Machine when partitioning? Is there anything else i need to think about? as new to formatting. Any thing else i can do to make process of transfering footage to Buffalo quicker?
Final question is if it is finally reformatted am i going to have to spend so long accessing footage from hard drive when back home and editing that it really is not worth if, and i should just write this off as an inappropriate purchase, and try and buy more memory cards and not bother with transfering/storing? Thanks in advance for time spent trying to assist.

Use Apple's Disk Utility in the Applications/Utilities folder to format the drive.
The programs on the drive given to you by the manufacturer is likely backup software (or malware) and essentially worthless, it will be wiped when you format the drive.
I do NOT advise you partition that drive for TimeMachine, rather I advise you not to use TimeMachine at all for your purposes because TM is just a backup, not a bootable drive.
Rather do this.
Get another hard drive that is equal to or slightly larger than your boot drive.
Format the drive in Disk Utiltiy > 1 Partition, option: GUID, Format: OS X Extended journaled, click Erase and move the slider one spot to the right and click Erase. This will take some time as it's going to map off any failing sectors it can BEFORE you lay data on the drive corrupting it.
Next, pay for and download Carbon Copy Cloner, use the default settings and simply clone internal drive to the external drive. this will also take some time the first time.
Next use Disk Utility to Repair Permisisons on both drive. Now reboot the machine and hold the option key down, you can select the external drive clone to boot from!!
You can update the clone the same way by using CCC, but it doesn't take as long, only copying changes.
This is better than TimeMachine as a bootable clone is bootable in case your internal drive fails to boot the machine.
Use the first drive for storage and be very gentle with it while it running, like you should do for all hard drives as they are subjective to shock damage.
The objective with the clone drive is you keep it safe, and not carting it around where it can be more subjective to damage like the other drive will be.
Remmeber you need 2 forms of hardware backup at all times.
Most commonly used backup methods

HD monitor suggestion for use with Mac Mini.

Similar Messages

Maybe you are looking for