HD Playback White Screen - No Video Playing

My NTSC-AVCHD-Full HD 1080i 30 does not play my HD videos in workspace or preview mode. I do hear sound, but only get white in the display area. ANy ideas why this is happening? I had to re-install after using it great for 2 years. I have an i5-2500K, NVIDIA 560 Ti and 16 GB RAM.

More information needed for someone to help... please click below and provide the requested information
-Premiere Elements FAQ http://forums.adobe.com/thread/1042180
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
-If Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
nVidia Driver Updates http://www.nvidia.com/Download/index.aspx?lang=en-us
Exactly what are you editing?
Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Similar Messages

White Screen when Video Plays

I am using Premiere Elements 9 software. When i add clips to the timeline and hit play, the video does not play in playback screen, instead i just get a white screen. Once i hit the puase button, the picture of the frame the playerhead is on goes back onto the screeen, but as soon as i hit the play button, the screen turns white again. I have updated my graphics card drivers and the prject settings are correct. What is causeing the issue?
This is what i get when i hit the play button:
tim

Thank you for that info. You have got a pretty recent (did not check, but that might be the latest) video driver. I sort of expected to see a date about 6 - 8 mos. ago. If there IS a newer driver, I would definitely try that. Also, as over the years, both nVidia and ATI/AMD have issued drivers, that were just bad with Adobe programs, I keep older (known good) drivers on my HDD, just in case I have to roll-back.
Do you have a Dell, HP, Lenovo or Toshiba computer? The reason that I ask is that those companies very often re-wrap the nVidia (and ATI/AMD) drivers, to work with their tweaked hardware.
With the latest video driver, and that Canon footage, if you have the proper Project Preset, things should edit fine. The smoothness of editing/playback will be heavily dependent on your CPU's speed, but should not affect the display.
Good luck,
Hunt

H264 playback - white screen in QT 7.12

A question that has been posted often, but i still haven't found a satisfactory answer, so I appologize in advance, maybe i'im just missing something.
I am attempting to play a show that was encoded with x264 on my macbook, using Quicktime player 7.12. h264. I get a white screen, but I do get audio.
all support pages i get to say to load the proper codec, but i was able to play some of the h264 stuff from the quicktime site...
I can successfully play the file using VLC.
So, i can play the file, but i'm presuming that quicktime player is what is used with iLife and i'd like to be able to access it via my remote.
A bit picky to be sure, but i also don't like having difficulties playing stuff in quicktime when it is supposed to be a natively supported codec... If it is a "non-standard" version of encoding i supose that would a reason? but then why would VLC be able to play it?
Thanks again

VLC allows playback of many file formats not supported by QuickTime Player.
Many "PC" versions of H.264 (your x264 files) are not supported as they uses different video codecs.
Use the Movie Info window to show what codec is used in the file. Search the Internet for a compatible version.

Why do I keep getting a white screen and just play button when previewing in browser? CP 7 and 8

It doesn't matter what I try, I just keep getting a white screen show up with a play button in the middle. Once I have pressed the play button in the middle the rest of the slides play, this is not good - I need to ensure company logo is first thing users see.

Hi
Are you using chrome browser ?
Chrome version 36 has some issues with captivate html5 output. Please find the following workaround for the issue.
http://blogs.adobe.com/captivate/2014/07/update-on-captivate-html-5-content-playback-issue -in-google-chrome-browser.html
Regards,
Hari

White Screen: xf86-video-ati and Compiz After Trying fglrx? [SOLVED]

I have an ATI Radeon X1200 graphics card. I recently tired the ATI proprietary catalyst driver (and catalyst-utils) from the AUR. They did not work well for me, so I uninstalled them. I had run "aticonfig -initial" but, after removing catalyst and catalyst-utils I restored my old xorg.conf. For some reason, with xf86-video-ati set up again, compiz starts, but goes to a white screen. I can see and move my cursor. Everything functions normally, I just can't see anything. I right clicked my desktop and created folders as a test. When I rebooted without compiz, the clicks had been received and folders had been created. How can I fix this? I'm using Gnome (if that means anything). Here's my /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "drm"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "glx"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "SHP"
ModelName "13ce"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "AGPFastWrite" "yes"
Option "EXAVSync" "yes"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS690M [Radeon X1200 Series]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by hank863 (2009-03-29 03:15:26)

Fixed It!! I had to reinstall xorg, mesa, libgl, xf86-video-ati, and ati-dri for some reason.

White Screen when "video" chatting with PC

My friend is running AIM 5.9 on Windows XP and when I try to video chat with her, all she sees is a white screen, but still can hear me. I have rebooted my computer, and so has she. We used to not be able to connect at all, but she rebooted and now she can hear me.
What should I do?

Hi Brendon,
What has she done to set up AIM on her end ?
Has she enabled it though her XP firewall ?
Has she enable the ports AIM needs in her modem ?
8:38 PM Tuesday; December 19, 2006

IPod Video - white screen, no video, won't turn off either

Greetings.
I have an iPod video that recently has been giving me quite a bit of trouble. The lcd doesn't display the menu or anything 95% of the time. The backlight turns on so it looks like it's powered, but I can't see the menu or anything else. When I turn it off, dark lines, sometimes horizontal, sometimes vertical go across the screen. The lines also sometimes appear as colored lines when the screen is lit.
Also it doesn't want to turn off via holding the center and menu buttons. It will go dark, then I'll feel some minor mechanical vibrations followed by an audible click (not the wheel). If I let the buttons go after about 10 seconds the screen turns on again to white screen without any video.
If I keep holding down the center and menu buttons, then it will continue to do cycles of the mechanical movements followed by the audible click, then do the movements and click again and again. Once I let go, the white screen reappears.
I've tried accessing the diagnostic mode, but that doesn't work since it just starts up in the white screen mode with no video.
I'm way past my warrenty. I've already opened my iPod several times to ensure all of the wires are firmly attached. I think its the LCD, but since it has trouble turning completely off, I wasn't sure if that means it's actually the logic board.
Any suggestions? Would it be a smart to try replacing the LCD screen? Or is it R.I.P. for my iPod?
Thanks!

Hopefully the battery has leak after long disused.
Recharge the iPod battery for at least 4 hours, normally it would take 30 minutes of recharge before the screen comes to live.
Disconnect the iPod, safely, after charging.
If your battery is good and can recharge fully.
Hard Reset the iPod - Press Menu and Center button simultaneously for about 10 secs till the Apple logo comes ON.
Select your preferred language.
Connect your iPod back to the Mac, and see if it is recognised by iTunes or Finder
Good Luck! and you will need it when syncing your iPod.
Here is the Apple Support Article for reference
http://support.apple.com/kb/TS1410

White screen (no video)?

Hi all,
A few minutes ago, the screen on my girlfriend's s10 went completely white. It seems that the machine is still working as I can shut it down by holding the power button.. and it boots back up.. but there seems to be no video at all now aside from the white screen.
During bootup, it will flash off and on a few times.. and I can still turn the brightness up and down with the FN + up/down keys.
Is the monitor on it toast? Not sure what to do.. she's pretty upset too

Hi, machine is still working ( with ext. monitor) thats at all better than nothing
... that could be a broken or loosen cable, too ...
Warranty ? Warranty Status
hope the best, ...
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

WHITE SCREEN of DEATH (ipod shows only white screen on VIDEO IPOD)

i was dumb enough to unplug my ipod when it was updating.
the result was a white screen that never went off and came back after resetting.
im dedicated to helping others fix this problem with out sending their ipod to apple.
THE SOLUTION:
reset your ipod by holding select and menu, THEN when you hear the wierd beeping sound hold down the select button and play button FOR ONE MINUTE OR MORE....... FIXED!!!!
it should display a check mark and say OK TO DISCONNECT!!
then just plug it into the computer and copy ur library back onto the ipod.

Try:
- iOS: Not responding or does not turn on
- Try using this program to place the iPod in recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
What happened when you placed the iPod in DFU mode and then restored?

White screen (no video) w/ QT&+H.264

I downloaded an H264 .mp4 file and when I view it in QT7, I get a white screen with sound. I've read similar posts and the answer seems to be that those folks weren't running QT7. I am most certainly using QT7 (running Tiger 10.4.3). Am I missing something?

as an update... I got the file to play just fine using VLC on my Linux box. This is really frustrating. You'd think that if an open-source player can play it, then surely Apple's proprietary player could! Apple still has a long way to go as far as supporting a wider variety of formats, especially the one it's promoting! (H.264)

Compressor outputs white screen for video?

Hi Folks,
Just bought FCP Studio 3 a few days ago.
I'm on a new mac pro quad 2.66 running latest rev of SL.
Here's the deal:
I took a 1 hour 33 minute edited DV movie from within FCP 7.
output a reference QT file.
went into QT and saved the text files (if i don't, i won't save the chapters).
following this great video for setting up a cluster between my 2 mac pros
http://vimeo.com/1799266
chose the Best 90 minute DVD setting for ac3 and mpeg2 at 6.2
ran it.
video is completely white. sound is there, but i don't get it?
when I go into compressor and click on my video file, I can see the footage in the screen on the right hand side. I thought maybe the reference file didn't include the video (ie. maybe I selected it wrong), but it's there.
Any ideas?
I ran a search on 'white screen' and 'white video', but nothing came up?
Cheers,
keebler

Hi folks,
just wanted to let you know that I believe the problem stemmed from me not choosing the DV NTSC 48 khz setting instead of 'current settings'. Once I chose DV etc... it was good to go.
Cheers,
keebler

Bright white screen when video is paused.

Hello All,
I've looked everywhere for a solution to this problem and there has been no previous discussion. Basically, whenever the Video is paused, instead of the paused frame being shown, there is a bright white screen. It is worth nothing that this issue happens when I use the Darwin Streaming server. If I serve the video using IIS, the issue is not present.
This issue using the Quicktime plugin is present in Chrome, Firefox, Safari, and IE.
If someone could push me in the right direction, it would be greatly appreciated.
Thanks.

Hi Brendon,
What has she done to set up AIM on her end ?
Has she enabled it though her XP firewall ?
Has she enable the ports AIM needs in her modem ?
8:38 PM Tuesday; December 19, 2006

MY CLASSIC HAS A WHITE SCREEN AND WILL PLAY MUSIC STILL IF YOU CAN FIND IT HOW DO I FIX THIS

I need to get my ipod fixed ihave tried the reboot by pressing the two buttons. have also restored from itunes but it still has a white screen and the rest seems to respond if only i had a photographic memory i could still find what i need.

Place the iPod in recovery mode using this program:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Then restore to factory settings/new iPod. If still problem you have a hardware problem.

White screen on podcast play back

When I "Export to File" on the Podcast, ansd then try and play the video back, the audio works just fine but the video comes through as white. Don't know why this is happening and have tried many different things!

you should probobly let the ipod fully charge then keep it on till it dies then re charge it

Game Center blank white screen - can't play games

I need help. I cannot play my games anymore because there is something wrong with Game Center.
This is what I get when I open Game Center.
http://i.imgur.com/SwbOdEj.png
This is my Game Center settings screen.
http://i.imgur.com/g6foSll.png
(spinning forever)
I cannot reinstall GC because it's a native iOS app. I've tried closing the app itself, along with the Settings app and restarting my iPhone several times, no dice.
Any advice?

Thanks very much to the other victims of this defect in iOS for sharing the fix which worked for me too.
But how absolutely rediculous and pathetic that we should have to reset all setting and then go back and re-enter all preferences to fix this problem. This is far short of the quality expected form Apple.
Flaws of this kind are exactly what causes corporations to fall from the top of their fields, and if not corrected to become obsolete. Are we seeing a glimse of things to come here?

HD Playback White Screen - No Video Playing

Similar Messages

Maybe you are looking for