HD receiver/a​mp connected to non-HD TV - resolution problems?

My 10 year old receiver/amp (non-HD of course) went belly up!  My current TV is not HD & I'm not ready to spend the money for an HDTV monitor at this time.
If I buy a HD receiver/amp will I have resolution problems with the current TV?

No, receiver/amp simply passes video signal from your source to the TV.
-Agent M
www.facebook.com/geeksquadrecon
www.twitter.com/geeksquadrecon

Similar Messages

  • HT1414 I set up my newly received IPhone 4, connected to my wi-fi, then turned it off.  I now want to turn it on and turn off bluetooth, but when I go to settings, general, none of the options respond.  I touch them and nothing happens.

    I set up my newly received IPhone 4, connected to my wi-fi, then turned the connection off.  I now want to turn it on and turn off bluetooth, but when I go to settings, general, none of the options respond.  I touch them and nothing happens.  I tried resetting the phone but that doesn't work either.  If anyone can help me resolve this, I'd really appreciate it.   Does Apple have a chat or live help available?

    WiFi is turned ON/OFF in Settings > WiFi not Settings > General
    Try Settings > General > Reset > Reset network settings.
    Also read this: http://support.apple.com/kb/TS1559

  • Setting up a new TC.  Everything went fine.  I was able to connect a macbook air, 2 ipads, an Iphone 6, and even a windows 7 PC.  All devices showed a complete and functioning internet connection, but none of the devices could access the internet.

    I am trying to set up internet connection to my home using a 3gig Airport time capsule as a router.  I unplugged the cable from the existing router, and plugged it into the ethernet port of the TC.  The TC fired up found tttttttthe internet connection, and glowed green.  I set up the password, and all, and was then able to connect a Windows 7 PC, 2 ipads, and iphone 6, and a macbbook air, all running the most current os.  All devices connect with the internet via the Airport device.  they all say that there is a fully functioning internet connection, but none of them can actually connect to the internet.  When I run a speed test via OKLA I am told that the test failed to innatiate.When I try to do a search I get an error message that the page cannot open because safari cannot make a secure connection to the server.
    Any suggestions?

    Inside the house I have what looks like a phone cable that is plugged into a power supply, and into a router.
    What is this router?? Is it the TC or a router supplied by the ISP?
    It will depend on how the system works.. but the instructions from skybeam are fairly simple.. you just setup a router with dhcp set on the WAN port for connection.
    On the airport utility open your TC by clicking it then clicking edit.
    Make sure the WAN is set correctly and the ISP ethernet cable is plugged into it.
    And make sure Network is set to DHCP and NAT.
    Please give me the screenshots of the same things from your setup.

  • I receive a not connected to the internet message several times daily on my iMac connected via airport to a time capsule which accesses the internet via cable modem.. When I input my password to enter network preferences, the connection re-establishes.

    I receive a "not connected to the internet message" several times daily on my iMac connected via airport to a time capsule which accesses the internet via a cable modem. Software/firmware is up to date on the iMac (OSX 10.6.8)  and Tme Capsule(7.5.2). Browser is Safari 5.1.
    When I input my password at the prompt to enter network preferences, all the lights go green (ie... ethernet, ISP etc.) and the connection re-establishes immediately and states "the connection appears to be working normally".
    It more of a nuisance than anything and seems to have started ocurring over the past couple of months. I also have a windows XP box also connected to the same cable modem that I never have internet connectivity issues with. I've verified all the physical aspects of the connections and can't see any evidence of any actual drops in the modem logs. I suspect it is just an intermittent communication loss between the Imac and the Time Capsule, but I am not very familiar with Mac equipment yet.
    Just wondering if anyone has experienced a similar problem and what you did (if anything) to resolve it?
    Thanks.

    The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
    So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
    Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

  • CRM server connecting to NON-R/3 servers & R/3 Servers

    HI Experts,
    Please explain how the r/3 sysytem & CRm system are connected ,
    how the crm system & Non -r/3 SYSTEMS are connected.
    the above mentioned are connected mainly by SOAP ( Simple object Access Proctocol).
    Please explain the conecpt for the above mentioned two
    Thanks in advance
    Prajith P
    Edited by: Prajith Prabhakara on Feb 15, 2011 4:21 AM

    Hello Prajith,
    The SAP CRM system with the CRM Middleware and CRM Applications forms the core of CRM System Landscape. The CRM Server can run as a stand-alone solution or with various back-end systems. If SAP ECC is the backend system, only a plug-in(PI_BASIS) is needed to handle the data exchange with the SAP CRM Server.
    CRM Server can be connected to non R/3 Back-end through SOAP (Simple Object Access Protocol ),  XML, ASCII adapter, BW system, SAP R/3 Back-end through the R/3 adapter.
    Other systems may be other ERP systems on non-SAP vendors. While many systems are linked to a CRM Server, they may not always use CRM Middleware functionality. The BW e.g. extracts data from a CRM Server u201Cpassingu201D this data u201Cbyu201D the CRM Middleware, which means it does not use BDocu2019s. The APO System is accessed via qRFC and BAPI calls from a CRM Server, also without the help of CRM Middleware.
    Hope that helps.
    Regards,
    Rohit

  • APPLE TV 2 - Can I connect to non-HDMI TV via HDMI-capable AV reciever?

    I have an older Sony Trinitron TV that is not HDMI-capable. I have all of my video components (DirecTV, Blu-Ray, Wii) connected to it via component cable from a DENON AVR-2307C1 receiver. I connected my new Apple TV 2 to the receiver via the HDMI cable and set up the receiver input properly. I can hear the Apple TV (I'm getting the Welcome voice message) but only get a black screen. Is there any way to make this work? Could it be as simple as a bad HDMI cable? Or should I return the Apple TV?
    Thanks,
    Ian

    SOLVED....I had the same issue when I bought my son an apple tv and discovered he has an older tv without hdmi, but WAS ABLE TO RESOLVE THE ISSUE!  You need to buy an HDMI to RCA converter. I got the HDMI to 5 RCA because he has the 5 red, green, blue video w/ red & white audio inputs, if you only have three inputs,  red,white and yellow you can get the HDMI to RCA 3 converter. I got the converter on Amazon for around $35.00. It works like a charm!  This is the one I purchased.  http://www.amazon.com/gp/offer-listing/B002WBOQPU/ref=sr_1_1_olp?ie=UTF8&qid=132 4389131&sr=8-1&condition=new  Hope this helps as both my son and I are extremely happy that he can use the Apple tv with his older TV.

  • When I plug my iphone into the computer to restore it I receive a "network connection timed out" message. However, all of our other iphones and ipod touches will connect fine.

    When I plug my iphone into the computer to restore it I receive a "network connection timed out" message.  However, when I plug in other iphones or ipod touches I can connect fine.  Any help would be appreciated.

    Try a powered external USB hub.  It uses a 120V AC wall jack to power USB devices, and the Mac only needs to provide *just enough* to comminucate.  Best Buy, Target, Walmart, ... about $20.

  • Since installing upgraded version I cannot access on line bill pay sites. Message received is unrestricted connection.

    I cannot access my bill paying sites. ie, discover.com. Message I receive is this connection is untrusted connection. The problem occurs with all such sites.

    I have talked to Apple Support Norway and solved the problem.
    Try changing your password. That should sent an update to your account through the system and fix the problem immediately.
    Hope this helps you as well.
    -C

  • Can I connect two non-TB external displays to a new MBP?

    Looking to pick up a new MBP and I would like to connect two non-Thunderbolt monitors, they are nice but WAY too expensive, and I'm wondering if this is possible.  I know I can use Matrox Head2Go line of products, but I would like to avoid shelling out another 2-300 on other hardware if I can avoid it. 
    So any other ways to drive two monitors?   I'm surprised there is no Thunderbolt -> DVI adapter or something.  Heck maybe there is, but I haven't seen it yet.
    Thanks

    here is the adapter your were looking for http://store.apple.com/us/product/MB570Z/A
    you'll also need to consider getting something that supports usb to dvi which will make your third monitor connnected via a usb port. This uses DisplayLink Drivers which let you connect a monitor via usb. Warning, it does not have full support for Lion yet.
    I'm using the arkview usb display adapter. there are other on the market, they all use DisplayLink. And since I'm on Lion I'm waiting for DisplayLink to fix their drivers to work on it (it's been a struggle).
    If you're on Snow Leopard it will do you well to stay on it. .
    you could get on Thunderbolt display and then connect a monitor to that with the dongle I showed you. Then you will have no issues with Lion and your three displays.
    Thunderbolt tech is new and new adapters will be coming out for it, especially something that handles mutliple screens. but you'll have to wait for this technology to be made.

  • How to best connect multiple non TB monitors to 2013 macbook air

    I have the new Macbook Air (2013)
      Model Name:          MacBook Air
      Model Identifier:          MacBookAir6,2
      Processor Name:          Intel Core i7
      Processor Speed:          1.7 GHz
    I would like to connect two non Thunderbolt displays to my Air. Suggested cables? is there more than one way to do this?
    Thank you! Chuck

    Check out Thunderbolt (Mini DisplayPort) to dual-DVI:
    http://www.monoprice.com/Product/?c_id=101&cp_id=10114&cs_id=1011409&p_id=8118&s eq=1&format=1
    (Not a recommendation, just a posiblity.)

  • E71x Connected in non-compatible mode

    Brand new E71x
    Vista - 4GB RAM, 250GB HDD, 512MB Video
    Nokia PC Suite  7.1.26.0
    Connected cable to PC USB 2.0 port
    and other end to E71x
    In PC Suite main window see "Connected in non-compatible mode".   What now?

    OK I found the solution on the Asia forums.  It's a setting within the phone that dictates what the phone does on a USB cable connection.
    Menu>Settings>Config>Data Cable.
    Change from Media Transfer to PC Suite and all is well.

  • Connecting to non-secure listener port over TCPS

    Hi,
    I am trying to connect to non-SSL port over TCPS.
    When I use tnsping, it hangs.
    When I do an OCIServerAttach, it hangs.
    Client is 10.2
    And Database server is 9.2 and higher..
    Any way I can find out why this is happening??
    -Harsha

    Maybe I'm not getting the point, but when you do not use SSL on this port, why do you want to use TCPS. Wouldn't TPC be a better choice?
    cu
    Andreas

  • Connecting to Non-Oracle Databases

    How can we connect to Non-oracle databases like MS-SQL server using Developer Forms and reports?
    can any body please provide steps to do this.

    HI
    to connect to Non-Oracle Database u have to use OCA ,,,u have to define ODBC data source for the database <source1> u want to connect. to connect from the forms or reports
    user name/password@ODBC:source1.
    hope this help u
    try to look for the developer help

  • Nokia 6500 Slide Connected In Non-Compatible Mode

    Hi,I've cracked my screen and unable to access anything! I transferred my SIM (3 network) to another phone. Although the phone works all my contacts and messages have disappeared. I am quite positive they were saved to SIM. Anyway tried connecting using broken phone with SIM using USB and get message Connected in non-compatible mode and I still cannot access contacts or messages. I'm getting extremely frustrated can anyone help?
    Many thanks
    Solved!
    Go to Solution.

    You have a S40 phone, Another thing you can try is, when you are sure the keypad is unlocked, connect the phone and after a few second press the right selection key(the one you usually use to step back or disagree or cancel) which should be cancel. If your phone is anything like my 5200 that will send it straight to connect via PC suite. I think even pressing the red button will do this(Not sure about the red button though but the right selection I'm certain about)
    Show your appreciation. Hit that kudos button real hard

  • What is best way to connect a non-sap sys sending  xml idocs to SAP system

    Hi Can some one please guide as to what will be the best approach in connecting a NON SAP system to a SAP system.
    The non sap system should not be connected to access real time data,it does not support RFC,it can send data in IDOC xml format and i think in teaxt files also.Also I dont think there is any EDI subsystem in place.
    There has to be a periodic upload of material data from SAP /stock status/
    then there will be incoming data into SAP for sales order/purchase order etc
    What would be the best way to connect the two systems,IDOCs with partial EDI looks the best way ,but I am confused as to how will the XML IDOC be converted to normal IDOC and viceversa,how to handle the event triggering mechanism.
    If someone has experience in such a scenario ,please help.
    There is a option to update the database of the application through SQL also...

    Hi,
    Check this link.
    Web Services from Function Module
    it might help u.
    Thanks.

Maybe you are looking for

  • HT1198 Sharing an iPhoto library between multiple users on a single Mac?

    Can anyone help me solve this problem?  I want to share an iPhoto library that holds all the family pictures across three other users who have separate accounts on the same iMac.

  • Do I need a transformer to plug my iMac into an Italian power socket?

    I've just moved from Seattle, Washington to Milan, Italy.  The iMac specifications say it can handle 110 to 250 volts and 50 to 60 hertz power.  Do I simply buy a US-to-Italian power-socket adapter and plug it in or do I need a special transformer?

  • TS1398 Apple won't help and I need some please :-)

    I had md197ll and the speaker broke so apple replaced it. My girlfriend and i both had white md197ll (white iphone4 8gig) all electronics in our house run on dd-wrt(linksys wrt54g) during Xmas I had 10 of them and they all connected... Apple replaced

  • How can i edit default XML in Poratl?

    How can i edit default XML in Poratl? I want make some change on Discussion.xml,but i can't find it and  i  want Edit it, what should i do? Thank you very much for your Help! Best Regards! Han

  • Regex and matcher only returns the first match

    Hi all. Im trying to rewrite some code and im using a regular expression to grab data out of a css formatted file, but im getting a bit confused. My matcher is only finding the first occurance of my pattern, how do i get it to find all occurances of