HD video storage for Final Cut Pro HD suite

I'm looking at setting up a Final Cut Pro HDCAM online suite, and I need to know what RAID system would be best for video storage. My reseller has told me that SANman systems are much better than Apple Xserve RAIDs, because of the data transfer rates. Can anyone tell me what systems they are running and what data rates are needed?

Hi,
Apple Xserve RAIDs are great but not cheap. Never heard of SANman, though!
Depends on whether you want a cheeper system to start with or ... HD uncompressed (single stream) needs sustained data rates of 200 MB/s. We have an HD system running OK (Media100HD, not FCP, though, but it shouldn't make a difference) with 4 large ULTRA ATA discs, striped with a cheap controller. The whole storage solution (1600 GB) costs less than $1500. Write back if you need the details.

Similar Messages

WHAT IS THE BEST VIDEO CARD FOR FINAL CUT PRO and MOTION?

Hello folks,
I have found a lot of posts regarding all kinds of troubles with ATI READEON X1900 video card.
When I talked to people from Apple, trying to decide which videocard to install in new MAC PRO, Ati Radeon X1900 was the one they did recommand for FCP and Motion. So are there any other cards which would actually suite better for Final Cut Studio2, or is Ati Radeon X1900 really the one to go with?
Thanks for any suggestions,
Kootenay

Techreport has some more information on the new 55nm Radeon (X3000) which should be another "mid November" releases, as well as an updated 8800 GT that still is under wraps.
So seems Intel and everyone else is trying to get new products out before the end of the year, if possible.
Drivers for graphics controllers may or may not need the work that sometimes seems to plague companies.

What is the best Youtube video converter for Final Cut Pro?

I want to keep the quality of the video and import into Final Cut Pro to edit. What is the best way to get the video in the correct format?

I've used FastestTube
http://fastesttube.kwizzu.com/
usually this allows you to download the files as MP4 files in either 360p or 720p, or as FLV files
I would download as 720p MP4 & convert in compressor to prores, etc for FCP.

Storage for final cut pro

i have a mac book pro and im looking into getting final cut pro so im thinking some additional storage is necessary... i've been looking at the WD 1tb mybook for mac, and im wondering if this will be enough room or will even work for final cut pro

If it was me, and this advice is by no means definitive, I'd buy an eSATA express card and a good eSATA enclosure. It's what keeps us from getting new 15" MacBook Pros (the lack of the express card slot.)
We have two Macbook Pros with eSATA express cards that are used on location for data wrangling or even editing. Each eSATA port can support up to 5 drives using port-multiplication (more actually, but one can't find enclosures with more very easily). Also two disk software-raid arrays work very well with the express card setups.
But that's just, like, my opinion, man.
Update: fellow posted above beat me to it! So, uh... +1?

Which is the best video converter for Final Cut Pro 7?

Hi, I am using Fincal Cut Pro 7.0.3 and I am looking to find the most compatible, most efficient video converter to work with my FCP 7, I need import vidoe file formats such as AVI, MPEG, MTS to edtiting in FCP 7, and I am having hard time to converting them, even I managed to convert them and imported them into FCP they need rendering again and again in FCP and that wasted me tons to precisous time.
Any suggestions? Thank you so very much!
Kevin

Compressor. Second, I would choose Episode. But then MPEG Streamclip is very usefull when convert from many of the MPEG formats. Keep in mind that formats such as those you listed are merely wrappers; the codec contained within could be one of dozens of codec, some of which may not convert well.
-DH

Can't open Sony PXW-X70 (.mxf) video files for Final Cut Pro X or iMovie, please help!

Hi there--
Just got the Sony PXW-X70 and I can't seem to open the .mxf or even successfully transcode the video files into something that can be read on the mac. (Running 10.9.5)
I downloaded Brorsoft Video Converter for Mac and the Ackrock Video Converters and neither of them work. They just are able to import the audio but not the video portion.
Very frustrated here, any advice? Thanks!

The clips from the X70 are not XAVC-S, but XAVC (sometimes called XAVC-L) and the plugin from Sony linked above is not compatible with them. I also don't recommend those sketchy third party conversion options. Still, as of mid-December, the best options for getting Sony X70 XAVC clips into FCPX are:
1. Use the free Sony Catalyst Browse to convert them (one at a time, although you can queue up multiple files without waiting for the previous one to finish)
2. Use the $200 Sony Catalyst Prepare software
3. Shoot AVCHD until there is a solution from Sony - supposedly Sony is at work on a plugin for FCPX to allow native ingest/editing of these clips. I've read that it should arrive very soon, but we'll see.
I'm using option 1 - $200 is ridiculous, and I didn't buy a camera with 10-bit 4:2:2 and a strong codec to shoot in AVCHD
If it's any consolation, Avid and even Sony Vegas will not import them either.

HT201109 video cameras for final cut pro x

which canon camcorders are compatible with FINALCUT PRO X

http://help.apple.com/finalcutpro/cameras/en/index.html
This will give you a list of tested cameras. There are probably many other models that have not been tested.

Flash Video Exporter plugin for FInal Cut Pro

Does anybody know how to install the Flash Video Exporter
plugin for Final Cut Pro so it shows up as an option in FCP?
I want to create FLVs directly from FCP.
Thanks

http://www.adobe.com/devnet/flash/articles/flv_exporter_03.htm
Scroll Down - its about mid page
This is on the intro page:
Note: You must have Flash MX Professional 2004 installed on
your machine to use the Flash Video Exporter with your video
editing application. The only exception is using the exporter in
Demo Mode.

2012 mac mini i7 or imac i5 for video editing with final cut pro 7 ?

Hello,
I am totally new to mac world.
I read some posts but not clear to me if better a mac mini 2012 i7 2,3Ghz and video card Intel HD Graphics 4000 or an imac 2012 i5 2,7GHz and NVIDIA GeForce
GT 640M with 512MB of GDDR5 memory.
The software is final cut studio 3 from final cut pro 7.
So better more performance in the l cpu or in the videocard?
Thank you
Gianni

If the Mac Mini has not had its hardware changed since the release of Mountain Lion, July 25, 2012, Final Cut Pro 7 is reported as not working in some situations under Mountain Lion. If it has been hardware changed by Apple on or after July 25, 2012, you won't be able to run Lion, and may not be able to run all Final Cut Pro 7's features. The two entries for Final Cut Pro 7:
http://roaringapps.com/app:4449
and
http://roaringapps.com/app:4909
Appear to conclude it launches, but there must be something that doesn't work. There are some issues both with Lion and Mountain Lion with Final Cut Studio 3:
http://roaringapps.com/app:1384
My advice, check the Final Cut forums to see what people have experienced with both. And make sure to follow specs exactly.

Can I add a secondary location for Final Cut Pro Documents?

Hi Guys,
I'm working on a large project which has taken up most of my 2tb hard drive which I use for my final cut pro documents (capture scratch, render files etc). Is it possible if I plug in another hard drive to use that as a secondary location for final cut pro documents as I have other (smaller) projects which I could be uploading and working on in the mean time? If so, how is this achieved and what are the pros / cons?

Sure -- go to Final Cut Pro menu on your menu bar and select System Settings.
The first tab is SCRATCH DISKS -- that's the term too -- not secondary folder for FCP Documents.
Change it there.
Drawbacks...
It has been a while since I've had to deal with this, but FCP used to not remember (feature or bug??) a project's original scratch disk location and if you change it for ONE project it will be changed for ALL future AND past projects... until you change it back.
Now, that in itself isn't a BAD thing. All that that means is that if you continue to capture material into that old project it will now put it over here instead of over there. Also, other things like render files and such which won't really matter much unless they do... and now you've got stuff spread over a coupla drives.
FCP's projects don't care. They've already mapped where they need to go to get the video and render files it needs. Move your Scratch Disk 33 times... won't make a difference to the browser and timeline. -- UNTIL you remove one of the important drives. THEN red lines galore! Un renders, missing files... messy messy messy!
Much better to start and finish a project in scratch disk. Makes for easy cleanup. Kinda like cooking thanksgiving dinner (American??) in 5 houses at once.
Good luck,
CaptM

Student Help advice! what is best iMac model for Final Cut Pro and logic pro

Hi
I am currently looking into getting a iMac, but is toggling to device if I need a 27inch or a 21inch(top model),which will be used for Final Cut Pro and logic
There is a lot of money being invested iMac, and I really not want to be stu k with a computer that not going to keep up with the amount of work load in the future.
The specs that I have on mine are..
21inch
Upgrades include
Sdd drive 512gb
Intel core i7
16gb of ram
Or
27 inch
Upgrades
Fusion drive or sdd 250gb
Intel core i7
(Possible graphic card) NVIDIA GeForce GTX 680MX 2GB GDDR5 [+ £105.60]
(Ram is way to expensive so will buy from second party)
Anyone who has brought a iMac for final cut or logic what would you likely buy?..Am really stuck on the hard drives between the 27inch fusion and 512gb on the 21inch
My budget is £1900
My fear is that the 21inch top model's graphic card may not be good enough for advance editing on Final Cut Pro In the future when I start to get more deep into editing..logic really only needs 8gb to run smoothly..buts its the final cut specs that am having problems deciding. I know iMacs are not future proof or technology lasts for that matter, but I do expect to have it run good for a number of years before I upgrade again.
If anyone can give me some advice, or even tell me about there set up they have for media work please let me know.

All kinds of things affect system & HD performance, I can't tell you why your 4 year old Mac is slow. Just because your old Mac is slow doesn't mean that a new iMac will be equally slow.
You are correct about the issue with the smaller fusion drives. It's one of the reasons I am not high on recommending them. Everyone thinks they want power & performance but don't understand the gap between marketing and real life performance. The 1TB fusion drive however should give you a good combination of rapid access and sizeable storage capacity.
I have used external FW800 / 7200rpm drives for years and have never had a problem with any of them. I consider them very reliable but admittedly I DO NOT use consumer drives like the WD MyBook that the big-box stores sell. For the most part I assemble my own with OWC Mercury Elite enclosures. In the past few years I have centered on WD Caviar Black and WD Scorpio Black drives. I also have some Seagate Barracuda 7200.xx drives. They all perform excellently and reliably.
Pls. refer to my earlier post for what i recommended to you.

New Canon EOS Movie Plug-in-E1 for Final Cut Pro

Just thought your would like to know. From canonrumors.com
http://www.canonrumors.com/2011/04/canon-updates-e1-plugin-for-fcp/
Canon today announces the latest update for EOS Movie Plug-in-E1 for Final Cut Pro – the company’s custom-developed software application that provides quicker and easier editing of EOS Movie footage in Apple’s Final Cut Pro software suite.
Launching to coincide with the start of the 2011 National Association of Broadcasters (NAB) Show in Las Vegas, EOS Movie Plug-in-E1 for Final Cut Pro version 1.2 will make the importing of EOS Movie files even easier, allowing users to transfer files from any folder, without needing to mirror the folder structure on the camera itself.
The update also enables smoother importing from Canon’s EOS 7D, EOS 5D Mark II and EOS-1D Mark IV models, allowing users to import footage without requiring the THM file generated by the camera.
Originally launched in February 2010, EOS Movie Plug-in-E1 for Final Cut Pro is designed to quickly and seamlessly convert EOS Movie footage from Canon’s leading range of EOS DSLR cameras to Apple’s high-quality ProRes 422 codec. The plug-in allows users to convert footage at approximately twice the speed of Apple’s standard conversion, creating a smoother workflow for the rapidly growing number of videographers shooting HD video content on DSLR cameras.
EOS Movie Plug-in-E1 for Final Cut Pro version 1.2 will be available to download for free from 25th April 2011.

And I just spent over an hour yesterday explaining to a client how utterly essential it was to maintain the exact folder structure for proper log & transfer:/
If I say that once a day to students, I say it a thousand times.
On top of that I just started Carbon Copy Clone today with all my updates in my editing lab. Not the end of the world but it's a little time consuming on 80 stations. Oh well.

An Excellent Tutorial for Final Cut Pro X

I am fairly new to Mac and I am learning Aperture and Final Cut Pro X.
Just wanted to share an excellent video tutorial for Final Cut. Its free but there is an "extended edition" of sorts for a reasonable price.
http://www.izzyvideo.com
Cheers!

I thought there would be some plugins for Quicktime, like Final Cut studio, which made from Quicktime---> Quicktime Pro. And under Final Cut Studio there was also some Protoolkit installed. No longer necessary?
I just want to be 100% sure, that FCP X and Motion 5 is a completely self-contained app, that need no installation. But up to now, nobody can tell me 100% if it really is so.
I thank you for your answers and hope that you understand my thoughts, about having a Dvd where I can install it from or where I can save the self-contained app, if it is so.

Panasonic camcorder HDC-TM90 any experience using Pavtube Video Converter with Final Cut Pro X

Does anyone have any experience using Pavtube Video Converter with Final Cut Pro X for Panasonic camcorder HDC-TM90 shooting in 1080 P 60 ( mts file extension)

Don't use these generic offbrand converters to get footage into FCP X. they re-encode your video and cause loss of quality. If FCP X cannot import your video then use a utility that simply re-wraps it into a quicktime file with no transcoding or loss. I prefer Clipwrap which works great and is updated frequently but there are free alternatives like Media Converter or Rewrap.
But version 10.04 of FCP X should import it directly from camera as long as the folder structure is complete and you are not trying to merely import it from single mts files.

Where can I find a full manual for final cut pro 6?

I'm trying to learn final cut because I haver an amature film making contest I'd like to enter and that would give me quite an edge, considering most of the intries will be using movie Could someone help me find a full manual or something that would assist in this indevor? I do only have final cut 6 because I am using my schools imac and that is ther vertion they have. so, can anyone help?

You should ask your question in the Final Cut Studio forum.
This forum is for Final Cut Pro X.

HD video storage for Final Cut Pro HD suite

Similar Messages

Maybe you are looking for