HD videos getting cut of when played on TV

I just edited my video using Adobe Premeire Pro and when I played on my TV the SD quality playes perfect but when I play the HD quality it seams that I have the zoom right up on top of the person.  It looks like I lost half of the original image.  any suggestions.

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

Similar Messages

  • Titles get cut off when playing after the burn

    The title created in the movie are too wide and get cut off when playing it in a DVD player into a TV. Is there a setting I should use before burning?
    Any help is appreciated.

    You should turn on the TV Safe Area and make sure that everything that you care about is within this area. Anything outside the area is subject to the over-scan of TV sets.

  • Do the edges of a video get cut-off when added to an iMovie project?

    When I view a video clip from the events library it fits in the viewer screen perfectly, i.e., the entire image appears on the screen.  After adding the video clip to my project, when I play the video from the project, the edges appear to have been cut-off, i.e., my giraffe has no head.  Do I need to resize the original video file? How?

    Thanks for the idea.  I found a solution to my problem in another discussion between KimsAZmac and AppleMan1958.  If you use stabilization the image is made larger so it doesn't fit in the viewer.  The solution is to turn off stabilization or use the slider on clip adjustments so the image fits the screen.
    Problem solved.

  • The sound on my iPhone 4S cuts out when playing music/podcasts.

    The sound on my iPhone 4S cuts out when playing music/podcasts.  If I unplug and replug in the headphones, the sound comes back on, but often for only 20 seconds or so before cutting out again.  Sometimes it will play for 15-20minutes before cutting out.  The track is not "paused", and appears to continue, just no sound.  I tried cleaning the headphone jack with compressed air to no avail.  I also noticed the the same phenomenon occurs when I sync my bluetooth to my car audio.  That is, it will play for a while, then the sound will cut out, even though the track is still shown to be playing.  If I reset the bluetooth, the sound comes back on.
    This started happening about a week ago, but no "event" that I can think of caused it.  I didnt' get the phone wet, forcefully drop it, or leave it in extreme heat.  I've tried doing a reset of the phone.  I also was running iOS5 when I first noticed this, and since upgraded to iOS6.  The problem appeared with both.
    Any help would be greatly appreciated.
    Thanks,
    Steve

    One thing that helped was getting a toothbrush and scrubbing the dock connector on the phone.  I scrubbed the connector and used compressed air for about 1/2 hour till the connector looked much cleaner.  An Apple employee told me that the pins on the phone had a little corrosion and sand.  The problem hasn't gone away completely, but has been significantly reduced.  I'm going to hold out until my contract expires after which time I'll switch to an iPhone5 (or newer) or Android phone.

  • Text getting cut off when printing to PDF from Excel

    Hello,
         I've seen a lot related to this subject but nothing that shows a real solution.
         Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
         It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
         Any assistance is appreciated.
    Thanks,
    Kevin Murphy

    please delete me from your mailing list.  tks.
    Date: Wed, 10 Feb 2010 11:20:28 -0700
    From: [email protected]
    To: [email protected]
    Subject: Text getting cut off when printing to PDF from Excel
    Hello,
         I've seen a lot related to this subject but nothing that shows a real solution.
         Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
         It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
         Any assistance is appreciated.
    Thanks,
    Kevin Murphy
    >

  • Bottom margin gets cut off when I try to print

    bottom margin gets cut off when I try to print

    Not being able to check it out on Pages 5 I have tosay how it works in Pages 4 (09). When Show Layout is checked/on you should see a grey border which is the area that the printer can't print on. Do you see a grey boder in your Pages 5?
    If you need a smaller margin on your document than the printer seems being able to do check if you don't hae a "borderless" option for the paper sizr you use. You check it in File > Page Setup
    Also go to HP and check if there is a newer printer driver if yours has some years on it.
    I hope this will help you

  • Cannot get any sound when playing .avi files

    Hi All
    I am running QT version 6.5.3 on Mac OS X 10.2.8 and cannot get any sound when playing .avi files but the picture is perfect.
    I have installed the following: M-Peg 2 playback component, AVI Components and AC3 component.
    Does anyone know if I am missing anything or how I can fix this?
    Many thanks
    Garry

    Download and install Perian from http://perian.org/
    You should read this support page http://perian.org/#support in case you need to delete older codecs. In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/

  • Why iphone centre in malaysia always get cut off when i call.

    i always get cut off when i call iphone centre on malaysia,
    need explaination from centre.

    so why are you asking us users?  That makes absolutely no sense at all.

  • Why "stop download video" feature not show when playing video

    why "stop download video" feature not show when playing video,, i hope you can give me Solution for this problem because when i using 3g internet, it downlaod the video Quickly ,,, so it consume the Balance

    Do you have Flash installed?   Check HD > Library > Internet Plug-Ins
    If the Flash Player app is not in the Internet Plug-ins folder, download and install from here.
    When you post for help, please state which OS X is installed.
    If you aren't sure, click About this Mac from your Apple menu 
    Troubleshooting advice can depend on that information.

  • I have a ATV2 and I'm getting audio interruptions when playing audio or video.

    I tried couple of things as resetting all the settings, unplugging all the devices, resetting the ATV to factory settings - NO RESULT!
    More than this, today I'm getting this error when I'm trying to play song from iTunes on ATV: An error occurred while connecting to the AirPlay device “Apple TV”. An unknown error occurred (-15000).
    Can anyone help here?

    No.

  • ITunes 7.6.1 cuts out when played on computer

    I've had a 30GB for over 2 years with no problems. About 2 weeks I upgraded iTunes to 7.6.1 and now when I play music on my computer, the music cuts in and out. Time still runs and the music is still playing technically, but nothing is coming out of the speakers. NEVER had this problem before and other audio and video devices do not have this problem. Tried reloading iTunes a few times and have clicked on the repair button, but no change.
    I don't want to uninstall/reinstall iTunes because I have a large collection and playlists. My music list is over 70GB and I only have the 30GB iPod, so I leave many songs unchecked to stay within size limit. Short of getting a larger iPod, any way to keep iTunes settings and playlists and reload? I keep my music files on detachable hard drive. Tried moving iTunes there as a backup, but it is only the shortcut that moves, not the actual iTunes itself.
    Message was edited by: DomG

    I've ben experiencing the same problem on my MacBook Pro (iTunes 7.6.1), and it's driving me nuts. I suspect that the bug may be rooted in Quicktime rather than iTunes, since the intermittent sound issue rears its ugly head even when playing video clips.
    I've taken this to a Mac Genius at the Apple store, and he was dumfounded. If I don't get some resolution soon, I'm likely to snap.

  • DVD video gets cut off, but preview shows dvd as good

    Having a problem getting my video to output from dvd burning without getting cut off.
    Computer is Win xp pro, 3gb ram, 2.33ghz cpu, 40gb free hd space
    Using Adobe Premiere Elements 3.0.2.
    I have video which I've recorded from my Sanyo xacti 720p avc camera, which records in mpeg4 format. I've converted the video(s) to mpeg 1,2 for dvd using my "Need4 Video Converter 5.9". At first I tried putting several mpeg1's into my premeire project, then I also merged all the video files into one, but still had the same problem.
    I put the video(s) into my premiere project, added some titles on the other video track. Also added some music on another audio track. So, the total size of the videos is about 3.5gb. I preview my project it looks great, I added some dvd scenes and used a nice template with scene selection and captions..the works. Now I try to burn it several ways, to a dvd, to a file folder on high or low settings, but everytime I only end up with about 1.5gb of data, and 25 mins of video, so it is cut off. My original video is an hour and 50 mins.
    The encoding takes about 3 hrs after I hit burn. No errors or anything.
    So, I cannot understand what I need to do. I don't want to convert to a smaller or lower format, bcz I dont' want to lose quality. I'm at a loss bcz I've tried so many different formats and combinations, let this stuff run for so many hours this past weekend, and still can't get it to work. Is there some kind of setting I'm missing? Something in premiere?
    I've read some best practices on the forum, and I understand to use bit rate of 7mbs or less, and to burn on slow speed. Is it at all bcz I'm burning it to my hard drive? but i don't think this is my issue. is it the old software? it came with my Sanyo camera, so I would think its good enough.
    Please help if you can. I was thinking my next shot might be to convert it down to a much smaller size, and maybe it will fit(but quality may be an issue). Thanks in advance. -Ron

    Ron,
    Yes, PE is a scaled down version of P-Pro, but also has some additional features, plus an easier way of doing many things, that its "big brother" does not. As to the ability to Export/Share frame sizes, I think that most are included in PE (would have to open each and explore precisely to tell you if it's all there). I do not think that this is your issue.
    As to the conversion, I'd step back to your original footage, Sanyo MP4, right? Unless Sanyo is using a proprietary CODEC to create the MP4's, you *should* be able to Open these files in QuickTime and play them. If you have QuickTime Pro (costs about US$30 to upgrade to "Pro), you *should* be able to Export and choose DV-AVI as your Export setting. Note: the term ".AVI" can mean so very many things. What you want is DV-AVI. This is the "native" format for PE - what it converts all other file formats to, to edit. The quality loss going with this format can be measured in a lab, but is almost totally impossible to see on any TV with the human eye. Doing this will likely enhance your entire editing experience.
    As for quality and conversions and compression, your camera has already done one conversion, when it wrote to MP4. You cannot get around that. Conversion to DV-AVI will be "virtually" lossless, though the file size WILL increase. The reason is that with MP4, not all "frames" exist with full content - part of its compression. With DV-AVI each "frame" will exist with full content. Be prepared for LARGE files, but files with all of the info.
    Then, when you Burn to DVD, you WILL recompress your data to MPEG-2 format, the DVD standard. You will loose some quality there, but it cannot be avoided. It is how DVD's hold their Audio & Video data.
    I still do not have any ideas that would directly affect your movie not burning completely. If the Duration of your movie has exceeded the capacity of a DVD-5, you would/should get an error message to that effect. You do not.
    One thing to go back and look for in your original Project's Timeline would be "gaps" in the Video. These can cause problems (or sometimes not). I zoom my Timeline way up, and use the PageUp & PageDn keys to "step" through the various Clips. The CTI (Current Time Indicator - that little doobie that marks where you are on the Timeline) should move in a linear fashion from Clip to Clip. If you see it pause, or hiccup, then zoom WAY in to the max and study the Timeline there. Are all Clips butted up to each other? Now, you can have Clips on Video Tracks above #1, that would allow you to have "gaps" in the Video on VT 1. That is OK, but if you have any spots on the Timeline, where there is NO Video, you'll likely want to fix these. You can close up the gaps by moving the Clips, so that they do butt up, or if you want "black" there, just go to the New icon and choose Black Video. Size it to fit the gap, and you will be fine. You can also extend the Clip before the gap, or after the gap, if that does not mess up your editing. Several choices and each should be based on what you want to have happen. If you find a bunch of gaps (even one can be deadly) try to Export/Burn again. Note: I've seen one 1-frame gap cause problems, but just had to re-edit a Project where I fixed 900+ gaps, and that Project had already Burned 4 DVD's. Go figure.
    Last thing to look at would be to hit the "\" key in Timeline mode. This will zoom out to show the full Timeline. Do you have anything stuck out by itself, past where you thought the end was? This should yield other problems, but not the one you are experiencing. Still, who knows? It's also a good thing to do, when you believe you are done, just to check that something didn't get "orphaned" out beyond where one normally looks on the Timeline.
    Good luck,
    Hunt
    [Edit] 01:50 is longish for a DVD-5. You will not be able to set a very high bit-rate (Quality slider), but you should still get the full Timeline, or an error message.

  • Why do my margins get cut off when I right click print, but not when I open my document and print?

    When I right click print (without opening the document) my margins get cut off, but if I actally open my pdf document and click print, it will print just fine.  This only happens when the document has print that is close to the edge.
    I am using Adobe 10.1.2 with Windows 7.
    Thank you in advance for your thoughts and help

    As for your comment on this being my first Mac, and the program issue, you misunderstood. Yes the eMac is in fact my first, personally owned, Mac computer other than the original Apple II series floppy fed PC, in which me and my father owned. The only other Apple/Macintosh computer I had experience on was my father's 13" MacBook Pro, and 20" iMac (both ran OSX Tiger 10.4.11, just as the one I have know runs). The iMac was upgraded to Snow Leopard due to our need for better picture/video/audio editing software such as that of Adobe, and the Macbook Pro was sold because of a business that was started being siphoned out of money. I purchased the eMac from a small business based off of eBay. It had the majority of OSX Tiger software, only missing minor programs like Photobooth. Other than that, it had no wireless software like BlueTooth, Wi-Fi capabilities, wireless sync, ect... But alas, when you buy a Apple/Mac computer, you must take a few cutbacks when purchasing it (even refurb.) for around $120.00 including taxing, shipping, handling, ect... I purchased nearly all of my software from co-workers and friends who had an extra key, or I would receive the software disc from them, and buy a key. The only "illegal" thing I had on the computer was music I had downloaded from LimeWire. I have never, and will never, trust any software coming from a torrent download site.

  • Videos getting cut off

    I inserted several camtasia mp4s into Captivate and the videos are getting cut off at the end. Is there a fix for this? Thanks

    Hello rusty89, welcome to Lenovo forums!
    There shouldn´t been a problem with a widescreen notebook, playing Youtube.
    Check you browser (test it in different one), if the problem exist update your flashplayer.
    It is also helpfull, if you tell us your exact type of machine and used OS.
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • Message getting cut off when using carkit

    While using my 5800 and OVI Maps with my Nokia CK-100 carkit nagigation messages get cut of at the start (vey annoying).
    "In the next roundabout..." becomes "e next roundabout".
    "After 200 meters..." becomes "r 200 meters".
    And so on...
    Seems likie the phone starts sending the audio before the carkit has switched on the audio (there is a relay saying "click" :-)
    Is there anything that can be done about this?
    Like a small pause before the voice message is played (1/2 second silence at the start of the message)?
    Also when the message is done playing the radio mute is on for a LONG while before radio switches back on. Why?
    Lars-Erik Østerud - http://www.osterud.name/nokia.html

    Upgraded from 4.300 to 4.401
    (download on my laptop and carried that down to my car, must have looked like a very high-tech car-thief sitting there with a laptop and a USB cabled plugged into something under the dashboard :-)
    Haven't tried driving yet (only tested that te CK-100 still worked :-)
    Lars-Erik Østerud - http://www.osterud.name/nokia.html

Maybe you are looking for