HD Voice not ready

I hate to you this at&t but your HD voice isn't ready for prime time. I had people call me these past few days, and I was breaking up on there end or there breaking up on my end. I switched to LTE data only on my iphone and it works. I'll turn on LTE voice & data feature when you guys are fully ready.

Hi there
I’m sorry to hear our HD Voice service has not been reliable in these cases. Is this something which has been happening in multiple locations? Also, has this always happened on HD Voice calls?
Thanks,
Charise

Similar Messages

Spa112 voice module is not ready

What can cause the "voice module is not ready" message in the spa112? I keep getting that on multiple spa112's while provisioning them. We are provisioning via TFTP and upgrading the firmware to 1.2.1 as part of the config. I have 2 files being downloaded, a general config for every device then a mac specific one with the two phone numbers. What I am seeing is the two files are being downloaded but the 112 still shows the old firmware.
They often sit in this state for an hour or more before we reboot them. After multiple reboots they will finally grab the firmware but sometimes still stay in this state.

I will try those steps next time I see the issue. On the ones I was seeing it I was getting times much more than 90 seconds, several hours infact
The config I am using is based on the 1.1 syntax.
Are you suggesting I do the following
have spa112.cfg only have a the following
http://10.10.10.10/spa/firmware/112/SPA112_SPA122_1.2.1_FW.bin
tftp://10.10.10.10/spa112-121.cfg
and then have
tftp://10.10.10.10/spa112-121.cfg be my main config?
Also I do often use the debug to confirm that my file is being applied. So I can see its being downloaded to the device, and that provisioning is being accepted
Is there a way make the spa112 not do anything until it has upgraded the firmware? What I see currently is that it gets its full config, both profile_rule and profile_rule_a sets its config, then updates firmware to 1.1.0 I want every one to do firmwre first and check to see if the firmware is at 1.1.0 before it downloads the config.

Voice Notes Bug?

Everytime I would listen to my recorded voice notes and play it back or backtrack (using the progress bar), if i do it multiple times, a white screen would appear with really small writing (cant even make out what it says) then reboots my blackberry
is there a fix to that?

Bump.. I have that same issue. It's with a 9650 - I upgraded to OS 6,0 and it still happens. :/ I had a 8350 before and it didn't have this problem.

Blackberry messenger 5.0.0.33 - options to send pics or file or voice note is not available

I updated the blackberry messenger from the pre-loaded version 4.7.1 to the latest version of 5.0.0.33. I was able to send pictures, voice note, and file during a chat session by clicking the trackball to bring up the menu and click "send voice note" or "send picture". This option is no longer there in the 5.0.0.33 even though the user manual indicate this function is there.
Anyone has the same problem? Where can I download the previous version (4.7.1 for tour) and how to re-install the previous version of the blackberry messenger?
Thanks for your help

Hi and Welcome to the Forums!
You have not updated to the current BBM version...you are on an old version. The current version is 5.0.0.57...
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BB Curve 9360 wont let me download music, receive pictures or display pictures, or receive voice notes... HELP!

ever since i put my songs off my phone onto my laptop to then transfer onto my iPod i have been having serious difficulty with my phone, i cant receive pictures, voice notes and cannot download music. i have tried everything, i have deleted blackberry messenger, deleted app world, wiped the phone 3 times, taken the battery out a lot and also tried to restore factory settings (dont know if it worked). its really frustrating that i cant even download a song or receive a picture! please help because i dont know how much longer i can go before i smash the thing up!!
all suggestions are appreciated!

Hi tompain10x,
Welcome to the Support Community!
Were you receiving any error messages on your BlackBerry® Curve™ 9360 smartphone? If so, could you please provide the full error message and when you receive it?
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Could not turn on Screen mirroring. The output device is not ready or does not support HDCP

i tried it on my tv sony bravia w700b with my new xperia z1
i didnt unlocked my bootloder or i didnt rooted my phone
dont know whats the problem is
'Could not turn on Screen mirroring. The output device is not ready or does not support HDCP'. can anybody able to tell how can I resolve this please?

Have you checked if your device does support HDCP? I looked at https://www.iezvu.com/ezcast.php?l=en but i'm afraid i can't find any detailed specification for it.
If you have unlocked your bootloader this may also be the cause for this issue.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

V4.0 won't start. crashes each time. Had to go back to previous version. Version 4 is just not ready for general release, it is massively messed up. The online fixes here had no effect whatsoever. VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

Can i transfer voice notes from my iPod touch to my mac book pro

how can i get my voice notes to my mac book pro from my ipod touch

Yes
From the Manual
http://manuals.info.apple.com/MANUALS/1000/MA1657/en_US/ipod_touch_ios6_user_gui de.pdf
Sharing voice memos with your computer
You can sync voice memos with the primary iTunes library on your computer, then listen to
memos on your computer or sync them with another iPod touch or iPhone.
When you delete a synced memo from iTunes, it stays on the device where it was recorded, but
is deleted from any other iPod touch or iPhone you synced. If you delete a synced memo on
iPod touch, it's copied back to iPod touch the next time you sync with iTunes, but you can’t sync
that copy back to iTunes a second time.
Sync voice memos with iTunes: Connect iPod touch to your computer and select it in iTunes.
Select Music at the top of the screen, select Sync Music, select “Include voice memos,” and
click Apply.
Voice memos synced from iPod touch to your computer appear in the Music list and in the Voice
Memos playlist in iTunes. Memos synced from your computer appear in the Voice Memos app on
iPod touch, but not in the Music app.

"the system is not ready"

hi
i working in web project and and no error in compilation but once the project
running get this message:
07/03/08 00:20:42 Error initializing server: IO Error: The device is not ready
07/03/08 00:20:42 Fatal error: server exiting
Process exited with exit code 1.
i don't know the problem in RAM or hard drive or what
but i have 1GB RAM and good free space
please , can any body help me?
thanks

Frank
............ welcom and thankyou, I'm sory for late
infact i dont try another unzipining JDeveloper
but every project i try to run same error
i will try new unzipping and comeback again
thankyou Frank again

Error while trying to create a Solr collection (java.io.IOException: The device is not ready)

Hello, everyone.
I'm trying to create a .cfm document that will erase a specific Solr collection and then re-create it, index it, and optimize it.
The delete works flawlessly.
Unfortunately, creating it isn't working, at all. I get the following message:
Unable to create collection publicsearch - An error occurred while creating the collection: java.io.IOException: The device is not ready.
This is a Windows 7 server running Apache and CFServer 9.0.1 (the version before Verity was cut.) I'm not getting any more details than the one error message. Any idea of what could be causing this? I've Googled this and I'm seeing a lot of issues similar, but not quite what I have happening.
Thanks,
^_^

Nevermind.. no one bothered to inform the developer that the path to the collection AND the path to the directory that the collection is for are different on this other server.
Fixed.

BADI Error: Field GOITEM-ACCT is not ready for input ? HELP!

I get this error message when testing my BADI in the MIGO Transaction. The BADI is the MB_MIGO_BADI. It is from the Line_modify method. Here is the entrie message:
BAdI: Field GOITEM-ZZREG_ACCT is not ready for input. (Change is not copied over)
Message no. MIGO050
Diagnosis
The contents of field GOITEM-ZZREG_ACCT have been changed in BAdI MB_MIGO_BADI (method LINE_MODIFY). The field, however, is not ready for input, so the change cannot be copied.
In method LINE_MODIFY, only the contents of fields that are ready for input can be changed.
The field is defined correctly in the screen as an input/output field - so it does not relate to that.
HELP!!!!!

Yes - I have reviewed all of the code and I never do any modify to the screen attributes of a field - although it sure acts like it. The screen lets me put in data and it stays there up until it finishes the method line_modify. The error is when i press return after i enter the field- it completes the BADI method and then goes to the main program and does field validation and always comes back with some internal table field called "work" with a value of 0 and it should be a value of 6.
Thanks!
Scott

"This drive is not ready for use; it's door may be open ..."

Hi.
I recently updated to itunes 7, and then had an issue with a corrupt file on the i-pod (which resulted in chkdsk hanging itself at 27%, always). So I restored the i-pod and that took care of that - chkdsk now says it's fine.
However - it is also empty. My machine and i-tunes recognize it fine upon start-up; however, a short while into a full synch to get my library back on the i-pod, I invariably get the following error message:
"The drive is not ready for use; it's door may be open. Please check drive \Device\Harddisk\DR 3 and make sure that a disk is inserted and that the drive door is closed." The message comes with the options "cancel, ignore and continue", yet the latter two don't make a difference, and even if I choose cancel, itunes keeps trying until it eventually crashes.
This always happens after itunes has synchronized about 1.13 GB (out of 18.55 available).
As far as I can tell, both my system and the iPod are up to date (itunes and windows update say so, anyway). E: is unequivocally and exclusively allocated to the i-pod; changing the settings from "optimize for quick removal" to "optimize for performance" has made no discernible difference.
Any ideas would be very much appreciated.
Thanks.
DELL Inspiron 4150 Windows XP

Hullo ...
let me follow up on this again. I've followed your advice, de-installed spybot, no change. I looked through the windows support help base, nothing. While trying out different things, I started getting a "delayed write failed" message, and I did some things they suggested (including adjusting the registry - me, adjusting the registry!)and it went away, and now all I get is the "open door" message again.
That is: everything works absolutely fine, I plug in the i-pod (latest version i-tunes and i-pod is up to date), it's recognized instantly by the explorer as well as i-tunes. I've run all scans you can possibly run on it, and it is fine (no corrupt files, nothing). I've restored it twice through i-tunes, twice through the explorer. I've changed the drive letter.
It starts the synch fine (it's still almost empty after the last restore), but at some point, I get the error message. Interestingly enough, *up to* that point, it'll synch fine - I can disconnect it and play on it whatever's been synched thus far. I can also modify my i-tunes settings and preferences, all of which i-tunes will recognize and adhere to. It is just unwilling to put more than 1GB of stuff onto my 20GB i-pod.
Something I've noticed is that it is sometimes indicating apparently faulty charges in the beginning (though that is quickly corrected once the synch starts), as in, it'll recognize a certain amount of audio files, but also claim a random amount of "other" files, which should not be there (apart from the 30MB or so of genuine i-pod software).
Anyhow. I haven't seen any solutions to this on the forums or in the apple help files, but people appear to be having this problem still. Any ideas or input would be very much appreciated ...
Thanks.

"The drive is not ready for use; its door may be open. Please check drive \

3G IPOD problems which are driving me mad and i can see others have had the same problem but i can't find any solution written down.
Basically my IPOD either freezes after a couple of songs or it downloads about 6Gb (of 40) and the freezes with the following message:
"The drive is not ready for use; its door may be open. Please check drive \Device\Harddisk2\DR6 and make sure that a disk is inserted and that the drive door is closed"
I've tried re-setting, installing etc but no luck. Any suggestions/solutions?
Laptop - Packard Bell Notebook Windows XP

Hmmmm. I'm not sure how to explain this.
You need to change the Drive Letter for your iPod.
You should be able to connect your iPod then open Windows Explorer and right click on your iPod(which seems to be Drive E:) and change it to a different letter (like H).
If you haven't enabled disk use for your iPod it probably won't appear in Windows Explorer.
To enable disk use: connect iPod, open iTunes. Open Preferences and select the iPod tab. Choose "enable disk use."
Once you've done all that, try resyncing.

C4440 scan error Operation could not be completed (error 0x00000015). The device is not ready.

I have updated, restarted, etc. Sometimes when scanning I do not get this message, but more often I do.
When scanning I receive the following message:
Error message when scanning "Operation could not be completed (error 0x00000015). The device is not ready.
Please help!!

Hello, nylamama:
Follow the steps in this document, and you should find the help you need to resolve the error.
Let me know if this helps, and thank you for contacting HP!
Cheers,
SN_63 (Saint Nana): I work on behalf of HP.
Click the thumbs up icon if you want to say "Thank you." To help others on the forum, select "Accepted Solution" on the post that solves your problem.

Scanner Operation could not be completed (error 0x00000015). The device is not ready.

When trying to scan I keep receiving an error message. Operation could not be completed (error 0x00000015). The device is not ready.
What does this mean? I have been able to scan without problems in the pas, with Windows 7 Fax and Scan.
Printer : HP PhotoSmart 2710
Computer: HP Pavilion zd8000 (originally XP)

Welcome to the Forum, losblanco,
I checked on this for you and I think your answer is here:
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/operation-could-not-be-completed...
If you don't find the solution there,
or if you need help for any other reason,
please come back and we'll take another shot at it!
Good Luck!
I hope this helps.
Click The Kudos Star to say Thanks!
Set in Reply “Accept as Solution” if it’s fixed!
Kudos are Earned!
Kind Regards,
Dragon-Fur

HD Voice not ready

Similar Messages

Maybe you are looking for