HD VOlumes stuck in a network ???

I have been trying to get help with this for two days now with no luck. SO I am getting ready to just trash everything and start over . I have an external hd so I figureed I would copy the HD . I am using Deja VU and I noticed something. There is a folder it is creating that is not on the origianl HD . it is called Network. The problem started as I was messing with a netwrok settngs and my in HD volum,es disappeared off my desk top but if I do a finder for them they are there just Greyed out. I can do disk utility stuff and it is OK . I tried making sure finder pref are showing them , with no luck . Anyone have nay Ideas

done

Similar Messages

Solaris 8 Intel Installation - stuck at initial network setup

Hi !
We installed Solaris 8 Intel (Europe/ger) on a PIII and are stuck in the
network config. It asks for systemname, ip,subnet, domain, dns.. (our settings are ok for sure)
but when whe click the confirm-button it reads some error message
(translated):
'Error during system configuration. Go back and check your settings'
An interesting fact:
The net seems to work, the machine's got its ip and we can ping it from outside.
WE JUST CAN'T FINISH THE SETUP TOOL (Interactive Install).
What we already did is configure the gatway in etc/defaultrouter, and
with route add default. The router is in the same network, and it's ok.
System:
PIII/700 on
ASUS P3BF
SCSI Adaptec 29160 (driver found on http://www.adaptec.com)
ATI Rage Pro 3D
3C905B FastEthernet-XL
(By the way, the NIC works fine, didn't expierience any problems)
Thank you in advance !

Oh. One more thing. You may want to install this system
as a standalone system, i.e. do NOT configure it as a networked
system. Then, once all installation is complete, then go back and
change to network config.
Try this. Thx. Tushar Patel.

Volume stucks of Nokia Music Songs

When i download songs from nokia music application, Volume stucks when i try to play it in Music + video in My Lumia 920.
This Becomes really annoying.

Hi HiteshTyagi,
Thank you for posting and welcome to the Nokia Support Discussions!
We'd love to help you with your concern. Just to verify your issue, when you say that the volume stucks, does it mean you're not able to adjust it while playing music? Is it only happening with music? How about with calls or Youtube videos?
If the problem is only happening with the songs downloaded from the Nokia Music, try removing and re-downloading the songs from the app. You may also try pressing and holding the power and volume down keys at the same time for 10-15 seconds. The phone should vibrate and reboot, but it will not delete any files saved in your phone.
We also recommend checking for available updates for the phone software. Go to Settings, and then Phone Update, and the select Check for updates.
Hope this information helps.
Cheers!

Server stuck at 'configuring network'

I have all the latest updates, running Mavericks 10.9.2 and Server. I'm trying to edit my host name settings - it detected 'Multiple Networks' asked me to pick which network the server should be based on, I selected ethernet, and after that it gets stuck on 'configuring network'.
Should I have opened some ports or something? Please do suggest how I can resolve this.

How are you editing your hostname settings?
The following are some guesses...
Typically, you'll want one network selected — with gigabit wired being fastest for most uses, assuming you also have gigabit switches — and WiFi disabled.
The following assumes a NAT'd network, as is typical.
The OS X Server must have a static IP address on your private networl.
You cannot reference any off-LAN DNS services. Not successfully. Your OS X Server must either be the DNS server for your network, or you'll need some other DNS server operating on your private network. Again, you cannot reference ISP DNS services, nor can you reference Google DNS. Nor should you use the dynamic DNS host name, either. You should typically not be running DNS services for a domain registered by someone else, and the dynamic DNS host name is not yours. I'd recommend registering a real domain, or using a subdomain of a domain you already have registered. Why register a domain for a private network? Because picking and maintaining a bogus domain is getting incrementally more difficult over time, given the increasing numbers of new top-level domains coming online.

[SOLVED] VLC no audio, Volume stuck at 0%-5% only when playing FLV

Hello Friends,
I've had this issue for a while, only on one laptop (I run Arch on everything)... VLC will play my .FLV files, video works, playback works but no sound. The volume gets stuck and can only be changed by 5% (If VLC was running before and volume was at 60% I can change to 65 and back to 60. If VLC was closed and I open a FLV file it is always at 0% volume and will only go up to 5%).
I get the following error every time I try to adjust the volume.. Other file-types work fine.
[tkh@tk6410 ~]$ vlc
VLC media player 2.1.4 Rincewind (revision 2.1.4-0-g2a072be)
[0x18a7118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7f7c9c001248] main vout display error: Failed to resize display
[0x19797d8] pulse audio output error: cannot change volume while not playing
[0x19797d8] pulse audio output error: cannot change volume while not playing
[tkh@tk6410 ~]$
Thanks in advance!
EDIT: I have concluded that this must've been the FLV files itself. They were downloaded using FireFox plugin VideoDownloadHelper
Last edited by etakeh32 (2015-04-24 05:23:25)

No idea... never play flv directly. https://aur.archlinux.org/packages/auto-reencode

Odd volume stuck issue.

Alrighty I've had my iPhone 4 in the UK for around a week now and all in all I have no real issues with signal nor battery life (apart from that skype uses more than it did on my 3G). My only problems were getting o2 to activate it, the proximity sensor (I hang up on everyone) and a strange volume issue. Well my phone is now active and I know apple are looking to fix the proximity sensor in an update to the OS.
My problem is a strange combination of when using the iPod app watching YouTube/online video and making voice calls normally and on skype in some order the volume for everything gets stuck at maximum and stays there. The volume buttons show the volume graphic and I move it up and down with no affect on the actual volume. In videos and iPod I can slide the volume control again no affect on the volume, so then I restart the phone and voilà back to normal. Thing is now I'm having to restart it once or twice a day due to this issue.
Has anyone else experienced this and has there been anything from apple on this? I couldn't find anything and to my mind I can see it being nothing other than a software issue because of the series of events needed to cause the issue.
Many thanks.

Hi,
Yes, I do have same problem, as mentioned in http://discussions.apple.com/thread.jspa?threadID=2541233&tstart=0. My volume does not get stuck at max but somewhere in the middle. Everything else is the same, it looks like it works but it don't change volume, although slider on screen goes up and down. After phone restart, everything goes back to normal. I also have 16 gb model iPhone4.
Dusan

Output Volume Stuck

Hello
I have not updated or changed any settings on my PowerBook, but the output volume seems to be stuck. I can not hear anything, not even start up chime. The volume icons when pressed on the key board show a circle with a slash through it. I have gone into system preferences and attempted to check there, but I can not move the slider bar for the out put volume, nor can I select the mute or unmute. How do I fix this? please help!
Thank you,
Rebecca

Welcome to the Apple discussions.
Sometimes the volume setting gets jumbled, and resetting the PRAM will fix it. Follow these steps:
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.

WiFi Coonection Problem-Stuck on "Other Networks"

Could see available networks. Tried to enter password and logon without success. Then selected "Other" networks and I am stuck there, ie. it no longer sees the available WiFi networks automatically. Tried a Network Reset with no change. Have no 3G SIM card installed. Network is at work. Any ideas anyone? Many Thanks.

Do not see this because it is not connected to a network. Many thanks though.

Volume stuck in Creative Muvo v

Bought my Creative Muvo v00 2GB today. Looks like the volume is stuck at "6" level. I turned off the volume restriction however I still cannot increase the volume. I can decrease the volume while playing. Is this a product defect? I feel pissed and plan to return this product to the store. Any ideas?

I have the Nano Plus. Imo the sound quality is probably the same for both. The V00 has much slower file tranfer to and from the pc than the Nano Plus. Both should? get the same battery life. The Nano Plus has FM radio while the V00 has no radio. The Nano Plus was made with 52 meg or a gig of storage, while the V00 has a gig or 2 gigs of storage.

Headphone volume stuck ay halfway

Ever since tue update my headohone volume is stuck at halfway. I can raise it to full but then it juat goes back to half way. Its fine without headphones. And the problem exists with 3 types of headphones ive tried

Hi !
Maybe you should try a repair via PCcompanion, it is often helpful

TS3274 Volume stuck in headphone mode

My iPad 3 is stuck on headphone volume. I have tried rebooting and it is still stuck. I was playing a game put the iPad down and the volume changed when I restarted the game.

Today my sons ipad came up with the same message. Found out the headphone jack had gotten wet, after trying to dry it out, I finally decided to take a cutip and pull some of the cotton off of it and put it down in the headphone jack. I to do this a couple of times to get it all out and dry, but as soon as it was dry the sound came back on immediately. Putting a pair of head phones in the jack was not helping, when I realized it was damp that was when I decided to try the cutips and it worked like a charm. Just make sure and twist it some in the headphone jack in one direction and change it every few turns. Hope this helps.

Volume stuck suddenly..Won't adjust..

I've been using my iTouch 1G for a year or so and it's worked flawlessly. Then today I went to use it and it's stuck on a loud volume. I tried adjusting the volume slider, but when it moves, the volume stays the same level. It won't adjust at all! I'm not sure what caused it but I might try restoring to see if that fixes it.
Any idea's?

I was listening to my IPod one day and wondered if the volume button on the side would adjust the volume while listening or if it was just to increase volume when earphones weren't attatched. After adjusting the volume with with the button on the side the slider would no long increase/decrease volume. On a whim I powered off completely and then turned it back on. It apparently reset and the slider worked ok. Hope this works for you before trying a reset. I guess it's the old adage...when all else fails...reboot.

Keboard Volume Stuck

Am using an iMac with Lion and today for some unknown reason the volume control on the keyboard became stuck on high. I have rebooted several times and even unplugged the keyboard but nothing seems to help. Even with the keyboard unplugged the volume icon is displayed on the screen and shows it at the highest level.
Thanks for you help

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one at no cost if the iPod has not been abused. They do not fix yours.
Apple - iPod Repair price

My volume button is broken and volume stuck on zero. how can i fix?, my volume button is broken and volume stuck on zero. how can i fix?

help! i have an ipad nano gen6, which works perfectly except that the down volume button is permanently stuck on down and won't come up. so i can't listen to anything - every time i turn the volume up it just goes immediately back down. Is there a way to turn off the down button, which would be a clunky but workable soluteion? or am i stuck with having to take it to hte apple store - if so any know how much they are likely to charge for this - from a quick net search it seems this is a common problem and a bit of a design fllaw so i'm not keen to pay apple to fix a problem that seems to be their fault!
Thanks
Jamie

Hello Jtatch,
This is an awefull problem and is not your fault. It is and hardware issue wich is eligible for repair. Check your service and support status via this link:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
If your ipod is within warranty go back to point of purchase and set up an repair. If you are within warranty than you will not be charged for repair.
Good luck,
Juleon

WL Server Stuck Thread on Network Read

I am experiencing an issue with the Weblogic deployment at my organisation.
Firstly an introduction; My Application works by receiving a Web Service (SOAP) Request from a client, the Web Service request is then processed and a internal message packet is generated and sent to a C++ Application ( which is listening on a particular port). The C++ application then processes the information, and returns the response to the web service Layer, which then process the Web Service request back to the calling client.
Currently we are having a situation where some packets are sent to the C++ application as expected. But then we are having situations where some packets NEVER reach the C++ side and the calling client time outs the entire request ( configured timeout is set for 180 seconds) and on the WebLogic Layer we have noticed a significant amount of Stuck ( and Hogging ) Threads. It should be noted that even after a stuck thread is recorded some requests are still being processed normally.
A deeper investigation into the Weblogic Thread dump shows the Weblogic thread is stuck at:
_at sun/nio/ch/IOUtil.read(Ljava/io/FileDescriptor;Ljava/nio/ByteBuffer;JLsun/nio/ch/NativeDispatcher;Ljava/lang/Object;)I(IOUtil.java)[inlined]_+
_at sun/nio/ch/SocketChannelImpl.read(SocketChannelImpl.java:236)[optimized]_+
+_^-- Holding lock: java/lang/Object@0x1a27db60[thin lock]_+
_at com/reso/number/service/comm/SoaSocket.receive(SoaSocket.java:128)[optimized]_+
_at com/reso/number/service/event/OTEvent.submitEvent(TEvent.java:219)[optimized]_+
_at com/reso/number/service/event/SIMQueryEvent.process(QQEvent.java:368)[optimized]_+
It seems that a write is sent to the C++ Application and the thread is 'WAITING' for the response.
Now, the problem is that due to the Infrastructure in place and architectural setup ( We are using Solaris Zone for Node deployment and we have the WebLogic AS on the same node/zone as the C++ application) we are unable to do a network trace to determine whether WebLogic actually sends the request.
Now my questions: i) Are there any known ways to trace the networks packets sent by Java ( maybe via the JVM) ii) Could Garbage collection cause the symptoms being observed? iii)Any recommended ways to resolve this kind of problem?
Thanks for all the help.

Increasing the Stuck Thread Max Time will not help. " Stuck Thread Max Time" tells us, after how much amount of time the thread should mark as stuck. Because by default it is 600 sec, any thread which takes more than 600sec for execution will mark as stuck. If you mention 700 sec, after 700sec the thread is marked as stuck. Even though the thread is marked stuck it still process.
Here we need to find why the thread is stuck at
]", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
Thread-15 "[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, in native, suspended, priority=1, DAEMON> {
sun.nio.ch.SocketDispatcher.read1(SocketDispatcher.java:???)
sun.nio.ch.SocketDispatcher.read(SocketDispatcher.java:46)
sun.nio.ch.IOUtil.read(IOUtil.java:228)
sun.nio.ch.SocketChannelImpl.read(SocketChannelImpl.java:159)
^-- Holding lock: java.lang.Object@16a47a8b[thin lock]
weblogic.socket.NIOSocketMuxer$NIOInputStream.read(NIOSocketMuxer.java:505)
weblogic.servlet.internal.PostInputStream.read(PostInputStream.java:156)
weblogic.servlet.internal.ServletInputStreamImpl.read(ServletInputStreamImpl.java:228)
weblogic.servlet.internal.ServletRequestImpl$RequestParameters.mergePostParams(ServletRequestImpl.java:2062)
You may have to increase the buffer size at sun.nio.

HD VOlumes stuck in a network ???

Similar Messages

Maybe you are looking for