HD4000 showing as Standard VGA adapterer in Device manag

Hello,
So i reinstalled Windows 7 ultimate and the device manager is showing my HD4000video card as standard VGA card. I have disbaled my discrete nvidia card as I am trying to use this HD4000 card in tandem with my egpu. However for that to happen the HD4000 needs to work properly !
i tried installing drivers for HD4000 from the website buy it says "this computer does not meet the minimum requierments for installing this software "
please help. i have a t430.

also, when i run performance tests im getting a score of 1 for graphics... in real time they dont appear as bad !

Similar Messages

IPod charges, but doesn't show up as a drive, nor does it show up in iTunes or the Device Manager.

I was given in iPod Touch 8GB (used) for my birthday on the 8th, but I still haven't been able to get any use out of it it. When I plug it into the laptop it charges, but it isn't recognized as a drive, doesn't show up in the Device Manager, and is not recognized by iTunes. I've tried plugging it into a different computer, using a different cord, re-installing drivers, re-installing iTunes - everything! It's also stuck in recovery mode, and I can't do anything to get it out. I've tried restarting it, but it goes right back into recovery mode, telling me to connect it to iTunes. It's driving me batty! If anyone can tell me how to fix this, it would be greatly appreciated. Thanks! c:

See if placing the iPod in DFU mode will allow a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not then it is time for an appointment at the Genius Bar of an Apple store.

780ti Twin Frozr showing up as tesla k40t in Device Manager

Hey guys I need some help with a 3rd 780ti i recently purchased from Amazon.
I installed it and its showing up in device manager as a Tesla k40t. I reinstalled my drivers and that did not help although I have not uninstalled and reinstalled them yet.
Using the latest Nvidia drivers 353.06
System
AMD 8350 h100i watercooled
16gb Corsair Vengance running at 2133
Evga supernova 1300w psu
3 MSI 780 ti twin frozr gaming 3g watercooled with ek products
Asus Crosshair Formula V-Z mobo
Samsung 840 evo system drive
Samsung 840 evo game drive
1tb hdd as backup drive
I get this error in device manager also
This device cannot start. (Code 10)
Insufficient system resources exist to complete the API.
Checked with nvflash and i get it not reporting as a 780 ti
Checked in gpu z and i get unknown info everywhere and cannot pull its bios.
Could the cards bios need to be flashed to the correct one?
i uninstalled it from device manager and all displays went black and i had to reboot.
upon reboot it detected my 2 working 780ti cards and they are currently in sli and the bridge i'm using is a hard rigid asus one that came with my mobo.
Any ideas? Any help or ideas are appreciated. I am going to use DDU while im waiting on someone to respond here and hope that fixes the problem. and reinstall from scratch. Thx in advance!!!!

Quote
Hey guys I need some help with a 3rd 780ti i recently purchased from Amazon.
I installed it and its showing up in device manager as a Tesla k40t. I reinstalled my drivers and that did not help although I have not uninstalled and reinstalled them yet.
only 1 of them is shows like this? [newest and latest one]
if you leave the new card alone in the system, does it shows the same?

My Hitachi external drive does not show up in my Dell Lapto Device Manager

I have a Dell external drive which is Hitachi Model 72323. I was happy with it until I used bit locker to add a password on it. After that it worked a couple of times then my computer will not recognize the drive again. It does not even show up in my device
manager. I plugged the device into many other computers and it is recognized promptly. However, another Dell that I have will only recognize it once in a while. I don't understand why it is not showing up in the device manager. Please help.

Hi,
I suggest you first install latest Windows Updates for your pc.
Reinstall USB controllers.
Click Start, then type device manager in the Search box, then click
Device Manager.
Expand Universal Serial Bus controllers. Right click a device and click
Uninstall. Repeat for each device.
Once complete, restart your computer. Your USB controllers will automatically install.
Update the BIOS, install your motherboard's latest chipset drivers. you need to view the manufacture website and the user manual
Meanwhile, please refer to the following article if you need some more information:
Error: “USB Device not recognized” when you try to access a USB external hard drive.
http://support.microsoft.com/kb/2654149
Yolanda Zhu
TechNet Community Support

Dv9913cl Notebook not showing DVD drive in system or Device manager, and more

I recently reinstalled the operating system on my stepfathers Pavillion dv9913cl notebook because it was slow and old. After I reinstalled windows I installed all of the drivers from HP's website, and made sure windows was completly up to date. I checked to make sure things on the computer worked, but I forgot to check the DVD drive.
So today when he went to put in a DVD it did not work. I was not present when he and my mom first tried using it, but this is what they passed on:
After putting in a DVD it took a few seconds and then something(I couldn't get them to tell me what) popped up saying something about the DVD region. I couln't get a clear answer on what it told them. My mother said something about it being the wrong region and something about selecting things like US English, and I don't know how what actually popped up for them. I also don't know were this path took them and ended.
Next apparently my mother went searching online. She found a Ask Yahoo that I couldn't relocate that told her to go into help, about windows media player. Then to go to Organize, then layout and show menu bar. Then step two she wrote down is About Windows Media Player -> tech.supportinfo. Specific File to determin codec. Right click file in Library - Properties on file tab - Audio Codec/Video Codec. (I don't know what she was attempting to do here and couldn't get a straight answer. I think the ask yahoo post told her she couldn't play the type of file because of a missing codec, but I dont think that is the problem, I inlcuded what she did though incase somehow it did something bad)
She did some other searching and tried to get into device manager I think to see what it said about the DVD device, but I am not 100%.
**So this is the poiny where I come home. I sit at the computer and pull up device manager. The DVD device is not listed. I looked at every single entry in device manager, nothing has an exclamation point, and nothing says DVD/CD device or anything close.
I went to HP driver website and pulled up the drivers for this laptop. There was not a particular driver there for the DVD player.
I resarted and went into the BIOS and went to the boot order options. The DVD drive does show up there. (I made no changes)
When I insert a DVD or CD nothing happens. I can hear the drive spinning, but nothing happens on the OS. nothing pops up. It doesnt show up in my computer, and I can't find the DVD or CD to play through any program.
I found this support article. https://support.microsoft.com/kb/314060
I tried all 5 of the resolutions. For resolution 3 I got to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}, but in the right pane there was nothing that said either UpperFilters or LowerFilters. When I did some searching I found some other people who had similar problems and fixed it by doing what is suggested in resolution 3 and deleting the entries for UpperFilters and LowerFilters, but they were never there for me to begin with.
Now I am at a loss on what to do next. It seems like when he first put the DVD in the computer it was recognizing the DVD since it said something about DVD region it must have known a DVD was in there, but I never saw that screen. By the time I got to the computer nothing happens when I put any DVD or CD in.
I apologize for the long post, and thank you for any help that can be provided. (Also I don't use Windows, so please try and explain things as layman as possible.)

Hello RonFishing,
Welcome to the HP Forums! I hope you enjoy your experience!
I understand the computer appears to be unable to play DVDs, and the required driver in Device Manager is not found. My response will not be as long as your post, but I will do what I can to assist you!
I do not know what Windows operating system you are running. This will be important in resolving the issue. In the meantime, I welcome you to try the steps in this HP document: Resolving DVD and Blu-ray Movie Problems (Windows 7)
Even though the document is for Windows 7, the steps are similar amongst all versions of Windows. Please try the steps and let me know the results.
Thanks for choosing the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

IPhone doesn't show anywhere except in iTunes and device manager.

My iPhone working, tethering and syncing property but does not show anywhere else. I need to back up the photos after some recent events and on a PC which just creates an encrypted file in an Apple file folder.
I can see the phone using an external program but the copy functions not there anymore. Picture wizard says there is no camera there. I have tried uninstalling the device and re-install. I have removed and installed iTunes and now have restore the phone completely. Picture wizard says there is no camera there. It does show in device manager and iTunes but oesn't show in Windows Explorer.
If I plug it into another computer it doesn't show in that either. Had a client over last night and his iPhone showed up on both computers and both started the camera wizard, So I'm thinking it's something in the phone. I need the photos backed up.
Thanks

This has really stumped me. I'm fairly well read on the iPhone software and related stuff. I also had some other tech savvy guys here last night and three brains had no answers. One thinks it must be hardware. I tend to disagree with that only because it charges, syncs, restores which tells me the hardware is working fine. i keeping this in mind that it's visible in iTunes(A) and Device Manager(XP). It's not visible in My Computer, Windows, Explorer or Control Panel. I can run a third party application on the iPhone and can see photos but the application won't let me copy them. I have some important photos that I need backed up. I have tried the phone on four other computers and it doesn't show on any where as the other phone shows up and works the way it should on those four computers. Same with reinstalling the drives, first one doesn't install, second one does. That simply narrows it down to the phone. I've restored the phone and it worked perfectly replacing the photos, oh and it was also working 6 weeks ago. So what's stopping it???? Arrr... its got me. I can usually fix those type of issues.

K9N2 SLI Plat. showing 2 HD Audio's in device manager

quick basic system setup.
MSI K9N2 SLI Plat
Athlon 64 X2 6000 (65nm)
2 x 1gb OCZ Platinum DDR2-800
EVGA 9800GT
320gb WD SATA 3.0
500w PC Power&Cooling
Samsung IDE DVD-R/W
22" Acer LCD
Installed Windows MCE 2005 w/SP3 and everything up to date driver wise. Problem is HD Audio device is showing up twice in device manager. One shows installed, one shows that no drivers are loaded. I have uninstalled the device and uninstalled the drivers, and reloaded everything. Used drivers from CD and from download, but not luck. Any ideas on what could cause 2 of the same audio devices to show up and only one to actually load, besides a general hardware failure on the motherboard?

That would make sense, if either the 9800GT or the K9N2 had and HDMI port. Sorry guys that's a no go. This is the first time I have ever run into this issue. 2 of the same audio devices showing up in device manager. One has drivers and loads, other shows unknown HD audio device and will not install drivers at all....

Apple Mobile Device USB Driver shows up with an ! in Device Manager (Windows 8)

When trying to sync my iPhone 5C with iTunes for Windows 8, the device is not recognised on the software. I have checked that my devices are up to date and uninstalled and reinstalled iTunes. I've uninstalled and reinstalled 'Apple Mobile Device USB Driver' in Device Manager, yet it continues to come up with an '!' next to it, and when checking the properties it states "This device cannot start. (Code 10) The specified request is not a valid operation for the target device." How do I fix this problem?

Hi, acxdunicorn.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > If the Apple Mobile Device USB Driver is not listed.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

PCI-GPIB not showing in MAX or correctly in Device Manager.

I am having an issue with the PCI-GBIP working correctly for our setup. I have removed NI 488.2, and all associated software from the computer and have done new installs of NI 488.2 v1.7 and GPIB software.
Configuration for the software allows me to choose the board type, and configure the board.
When I test the board using diagnostics, I get the board as passed.
When I open device manager, it sees the board as PCI Simple Communications Controller. MAX Does not read the card at all.
I am using this to control an ICP-OES using WinLab32, and can get a connection, but am getting a Status Command Failed when attempting to light the plasma. There is communication, but I don't believe that it is all there.
I have tried reinstalling multiple times, but to no avail. There is no NI-VISA on the computer, but I didn't uninstall this either. I attempted to install NI-VISA 4.2 and it stopped communicating entirely.
Any help is greatly appreciated as I am stumped.

Hi Joplrw10,
Which PCI-GPIB card are you using? What OS? It sounds like you may have a driver issue. I would recommend uninstalling all the driver and reinstall according to the below links.
Installing PCI/PCIe-GPIB Controllers
http://www.ni.com/getting-started/set-up-hardware/instrument-control/pci-gpib
Instrument Control in Windows with GPIB: Set-up and Configuration
http://www.ni.com/webcast/1433/en/
Thanks,
Frank
Application Engineer
National Instruments

Iphone 4 makes an continuous intermittent vibration/buzzing sound when plugged into any of computer's 3 usb ports; does not show in itunes or Windows Vista device manager. No problem charging the phone with other power sources. What's going on?

This problem happened intermittently in the past but now happens every time I plug in the phone. I suspect it might be a problem with my computer, an Acer Aspire 4530, perhaps with it's charging function via usb ports? The phone makes the same buzzing sound twice when I connect to other power sources, but continues when connected to computer. I have this issue even when the phone is 100% charged.

This problem happened intermittently in the past but now happens every time I plug in the phone. I suspect it might be a problem with my computer, an Acer Aspire 4530, perhaps with it's charging function via usb ports? The phone makes the same buzzing sound twice when I connect to other power sources, but continues when connected to computer. I have this issue even when the phone is 100% charged.

T420s-NVIDIA NVS 4200m shows up as Standard VGA

Hey all,
So I've had this problem for a while now, I know that in my T420s there is a NVIDIA NVS 4200m GPU, but it refuses to recognize that it even exists. I'm running it in NVIDIA Optimus mode, but in Device Manager, all that shows up under the Display Driver are Intel(R) HD Graphics and another which says Standard VGA Graphics adapter (which can't start due to a 'Code 10')
Why is it that my NVIDIA doesn't show up? How can I get my T420s to recognize and use it over the Intel HD?
Any help you can give me is greatly appreciated. Thank you!

I got my new T420s today with nVidia NVS 4200M and after turning it on, it just showed standard video with 1024x768.
In device manager it showed both standard VGA graphics and NVIDIA NVS 4200M but when I right clicked on the desktop it did not give me an option to choose nVidia, but just standard VGA.
I updated the nVidia graphics driver from here (7 Nov 2011, the one from April 2011 was not enough)
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014142
I installed, restarted and nVidia showed up with all display options
Problems resolved!

Graphics Card Does Not Show Up In Device Manager (Re: Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

Equium P200D PSPBNE: device manager does not show the DVD-RW DVR-K17A ATA DVD/CD

Hello experts out there i need urgent help!!
My Equium P200D all of a sudden it decided to show the DVD/CD Drive in device manager as no longer working due to a corrupt driver??
I am running Vista Home and despite deleting the drive and trying to update the driver nothing seem's to work can anybody help i am getting to the point of throwing it out of the window.
Regards
Stephen

Hi dude
This issue is known to me it happened to me too
The problem is you Windows registry!!!
One registry entry is corrupt and therefore the CD/DVD ROM does not work as I should.
So what to do.
Firstly remove the driver from the device manager. Just simply delete it.
Then access the registry and and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Then reboot the notebook.
Check it out

2nd HDD not recognized in Win7 Disk Manager, Shows in Device Manager, BIOS, Win7 Repair CD

Hello,
I am trying to add a newly purchased HDD to my laptop as the secondary HDD. The primary is a 160 GB SSD.
Primary SSD: Intel 160 GB SSD model SSDSA2BW160G3H
Secondary HDD: WD 750 GB 7200 RPM SATA/300, Model WDBLHJ7500ANC-NRSN
Laptop: HP Pavilion dv7t-7000 Quad 17.3" laptop
Laptop Config: Intel i7-3720QM 2.6 GHz Quad Core, 8 GB RAM, nVidia GT650M, 160 GB SSD
Laptop BIOS: F.24
Laptop Date of Birth: 5/24/2012
OS: Win 7 Prof x64
Shows up in BIOS (can run diagnostics OK).
Shows up in Win 7 Prof Device Manager.
Does NOT show up in Disk Manager.
Checked device drivers for Win7 Prof Device Manager HDD, have the latest.
Checked service manual, can't see anything that I missed.
Booted with Active@BootDisk (Win PE rescue disk), drive showed up as uninitialized.
Initialized drive, partitioned (one large), formatted NTFS.
Booted with Win 7 Repair Disk (Win PE), can see the drive in command prompt, able to write a text file to it OK.
Still won't show up in Win 7 Prof in Disk Manager.
Any ideas? Maybe a firmware upgrade for the laptop? Some kind of incompatibility with the HDD and SDD such as different dirve modes (don't believe that Win7 has issues with IDE versus AHCI devices)?
I had trouble adding a 2nd HDD to my dv7-6000 laptop; it finally just showed up months later. Is this common with HP laptops?
I am stumped and any help is appreciated. I checked the Internets and didn't see anything other than HW issues. I need this to work for the new semester that started today.

More testing:
WD Data Lifeguard (Western Digital's HDD diagnostics) also won't see the HDD after booting with Win 7 Prof off of the SSD.
Moved the HDD cable from the 2nd HDD to the primary header (SSD disconnected). Was able to install another instance of Win7 on the 2nd HDD OK; this proves that the new WD HDD and the secondary cable are OK. Moved the cable back to the 2nd header (still no SSD) and the computer booted off of the secondary HDD connected to the secondary header OK.
Added the SSD back to the primary header and booted into the instance of Win7 off of the SSD. Disk Management can't see the 2nd HDD, WD Data Lifeguard can't see the 2nd HDD; however, Device Manager is able to see the 2nd HDD OK.
Ran Intel SSD toolbox on SSD; no issues. Ran WD Align by Acronis on SSD (checks for advanced format alignment of 4K boundaries); it's already aligned to 4k boundaries.
Connected HDD to pri header, booted Win7 Ultimate on HDD. Ran WD Data Lifeguard on HDD; it's fine. Booted into WD Align by Acronis CD, ran WD align against HDD; it's already aligned to 4k boundaries.
Put HDD on pri header, SSD on secondary header and booted into Win7 Ultimate on HDD. Able to see both drives in Dask Management.
Put SSD back onto primary header, HDD back onto 2nd header, booted into Win7 Prof on SSD. Disk Management can't see the HDD again...
Updated laptop BIOS from F.24 to F.2D rev A (Install Shield Wizard confirms that it is for Win7 x64 as well as Win 8.1). Didn't fix the issue...
Ran Intel Driver Update Utility. I have the Intel RST (Rapid Store Technology) driver v 11.0.0.1032. Did not state that I needed to upgrade this driver. This is latest version on the HP website.
Everything works except having the SSD connected to the primary header, having the HDD connected to the secondary header, booting into Win7 Prof on the SSD and trying to see the HDD in Disk Management. Unfortunately, this is the configuration that I need to work.
Any thoughts on what is causing this? Hardware issue with HP Laptop? Power supply issue? Bad HDD controller? Bad install of Win7 Prof on SSD (appears to run fine otherwise).

Monitors Showing 2 and 3 times in Asset Manager

All IBM's we have show 2 and 3 monitors in device manager. I believe it is
caused by the display adapter. There is no way to permanently delete the
monitors. The problem is that because of this all 3 monitors also show in
asset manager. Is there anyway to delete these in asset manager?

Are these monitors being detected with serial numbers?
If so, are they identical serail numbers or different ones?

HD4000 showing as Standard VGA adapterer in Device manag

Similar Messages

Maybe you are looking for