HD6870 No signal on My 870a fuzion

hi..i`ve just bought sapphire HD6870 1Gb DDR5 from my friend to replace my old HIS 4850...but after i installed it on my MSI 870A FUZION, 6gb corsair memory, TX750M CORSAIR PSU..then turn pc on It`s sound 1 long beep and 2 short beep..it didn`t display anything on my BENQ 22" LED monitor when i saw on my LED it`s witten "NO SIGNAL" ...but when i tried using old 4850 it work smoothly without any problem..anyone can help me how to fix it ??? is it PSU, BIOS, or MEMORY issues ??

Quote from: Witkizz on 10-July-12, 02:19:15
hi..i`ve just bought sapphire HD6870 1Gb DDR5 from my friend to replace my old HIS 4850...but after i installed it on my MSI 870A FUZION, 6gb corsair memory, TX750M CORSAIR PSU..then turn pc on It`s sound 1 long beep and 2 short beep..it didn`t display anything on my BENQ 22" LED monitor when i saw on my LED it`s witten "NO SIGNAL" ...but when i tried using old 4850 it work smoothly without any problem..anyone can help me how to fix it ??? is it PSU, BIOS, or MEMORY issues ??
i wouldnt suspect the PSU at all as Corsair units are good and has more then enougth power for the Graphics Card!
could be bios related! as a test install the HD4850 and enter bios and load optimized defaults and save setting and exit! turn the computer off and put the HD 6870 back in! that might fix it?
also test the card in another system as it may be just a faulty Graphics card!

Similar Messages

870A Fuzion Power has problem with keyboard and mouse movement only in games.

Hey guys,
recently built a new system and chose to go with the 870A Fuzion Power mainboard, everything has gone very smoothly execpt for one problem, only when I play games like Crysis 2 ect the mouse seems to jolt around now and again and the keyboard decides to stop responding if I hold down the movement keys, and this is only in game not surfing the web for example. Now, I am using a wireless mouse and keyboard but I plugged in a PS/2 keyboard and the exact same thing happened. I've installed all of the drivers that came with this board and the drivers for the mouse and keyboard. Any of you guys ever had this sort of problem or know how to fix this?
Thanks.

I bought a new Macbook pro in june 2010, I didn't have any keyboard or mouse issues prior to upgrading to 10.6.4 supposedly this update was made to fix some issues with keyboard and mouse becoming unresponsive. For me the opposite happened. after the upgrade, my keyboard and mouse (trackpad) becomes sometimes partially unresponsive or totally unresponsive. the only way to solve the problem is by completely turning of the computer and turning back on.. granted it doesn't happen very often.. generally once every about 2-3 weeks but it is still annoying though..
I didn't have a chance to use the computer too much on the previous version (10.6.3) so I don't know if it is software related or hardware related.. any thoughts?
Message was edited by: msoued

MSI 870A Fuzion.... BIOS keeps resetting it self after restart,

HI NOOB here
I've just brought my first ever parts for my first ever computer build.....fitted everything perfectly and booted....
1st: logo screen came on
then another screen came saying low battery, thunxsomething...IDE, bios clock unset...."hard drive not detected"
3rd: screen came up asking either f1 to go into bios f2 to load defualts
i pressed f2 little dash flashes in the top corner
rstarted with second {the same procedure as explained }try ubuntu live usb loads......
after shutdown and installation of OS
i attempt to troublkeshoot the issue of bios time, IDE, and no hard drive detected
by going into the bios... which was totally from whats expected i.e. in colomns instead rows
i was expecting bios style shown below however after thought i got adjusted to the new rows one
http://www.tomshardware.com/reviews/x48-motherboard-comparison,1781-5.html
loaded optimal settings, changed bios clock and date, adjusted boot preority
saved AND EXITED
BUT foud that my MSI 870A Fuzion.... BIOS' keeps resetting it self to factory defualt... ,
AND>>>>>>>>>>>>>>>>>>>>>>>>>
also found that it didn't go directly into the NEwly installed OS.....
HELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELP
I'm its quit anoying knowing that this is my first ever computer build

Quote from: npm1 on 18-November-10, 22:29:03
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
just as an extra, a small splat of water went on the board i simply wiped it away........(happened before first boot) would this by any chance affect the bios
Quote
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
what message exactly you are getting at bios post screen?

870A Fuzion Bug Report

870A Fuzion Bug report
http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=2105
870A Fuzion + X2 BE555 @ Phenom II 4000MHz
Ripjaws 2GB *2 1600 7-8-7 1T
Power supply OCZ 850W
VGA Manli GTX295
Test with Windows 7 32Bit & 64Bit
nvidia driver 260.63 & 258.96 WHQL
Multi-GPU Computing Driver v1.6.108 and New Version from http://www.lucidlogix.com/
if install Lucid Hydra driver and software Windows freez and restart BSOD
Error nvldmkm.sys
- disable or enable SLI -->> Hank and restart
- install VGA slot 1
- reinstall Windows for test
now used with not install driver and hydra software

Quote from: Jack t.N. on 28-September-10, 01:41:11
If I am not mistaken, you are only using one video card. Is that a correct assumption?
using one video card work great
Thank you
Fix step
1. uninstall Lucid Hydra driver and software
2. install nvidia driver and disable SLI
3. Install Lucid Hydra driver and software
Work

Using 870A Fuzion With New & Old Graphics Cards

Hello I am planning to assemble a new PC using the MSI 870A Fuzion.
All parts will be new most specially the graphics card.
PowerColor Go! Green HD5750 1GB GDDR5
I want to pair this with my old XFX 8500GT Fatal1ty Edition.
Will this setup be possible?
Thank you for your insights.

MSI does say here:
http://eu.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=2105
Quote
MSI Fuzion Technology
* Powered by MSI Fuzion Technology, MSI Fuzion Series MBs offer Non-Identical & Cross-Vender Multi-GPU Processing; which allows users to install any 2 different level and brand graphics cards in a single system. The technology can perform scalable rendering to deliver near-linear gaming performance by load-balancing graphics processing tasks.

870A Fuzion AMD 770 ram 1600mhz (non oc)..HELP..!!

hi there,,wanna ask about my board 870a fuzion amd,,caanot archive speed 1600mhz if i use it ,only detect 667mhz only..,but the spec say this board only use 1333mhz is the maximum but can oc to 1600mhz..........im using crucial ballistix tracer 1600 ram...please helpp.....someone...

You might be able to get the ram to run at 1600 by doing the following: go into bios(pres "delete" key when booting) got to "cell menu"
go to "FSB/DRAM RATIO", Set to "1:4". You might have to change timings to crucial specs. save and exit. That SHOULD bring you ram to 1600.
Bas is right that current AMD chips do not NATIVELY support ram speeds over 1333, which IS overclocking. I have my supertalent 1333 ram at 1600 with NO issues at all. your milage may vary. You should also post your system specs like in our sigs below our posts. VERRY IMPORTANT. See posting guides please.

870a fuzion sli?

Hi,
Ive read on several sites that the new 870A Fuzion Power Edition can handle SLI.
But on the MSi webpage it says "Y" to crossfire and "N/A" to SLI.
So can someone please answer what to believe?
If i buy that motherboard, will it handle geforce graphic cards and the possibiliy to SLI connect them?
Or is that motherboard locked to radeon graphic cards?

Hi,
the AMD 870A Chipset does not natively support SLI, however, the whole point of the "Fuzion" Technology is to enable every(!) type of multi-GPU configurations (including ATI+ATI, NVIDIA+NVIDIA, ATI+NVIDIA & NVIDIA + ATI). Linking two NVIDIA Cards via the Fuzion Technology (Lucid® LT22102 Chipset) is not the same as SLI in the strict sense, but it will have the same effect.

870a fuzion atx 6pin power connection

Can anyone help me with my new 870a fuzion board im setting up. It has the 8 pin cpu atx which plugs in no problems. But than it also has this 6 pin atx connection to the motherboard it says for the videocard. My power supply has no 6 pin atx connection (does a 6 pin mobo connection even exist). Im assuming i just connect one off my PCI-E 6 pins to the motherboard it fits in no drama. Or do i put my other 8 pin atx connection in an leave 2 pins hanging out. Is this correct first pc ive built in a few years.

Quote
Im assuming i just connect one off my PCI-E 6 pins to the motherboard it fits in no drama.
Correct, PCI-E 6-Pin.

870a Fuzion Sata3 issue

I have a Fuzion 870a MB and I bought a Western Digital 1TB Sata 3 HD to use it as my system disc.
When the Win 7 installation program asks me where I want to install the OS I choose this Sata3 HD that's listed, however, if I either try to format it or to continue the installation on the selected disc, I won't see a progress bar and after several minutes Windows will abort the process, telling me that it wasn't possible to finish the installation.
The manual says that in order to use Sata3 HDs on this motherboard I must enable that Marvell controller, still there's a question I have unanswered: Will 'only' one Sata3 HD work or am I supposed to have at least 2 of them working in Raid?
I'd be very surprised if I have to setup a Raid, because as a customer I think I should have been warned about it.

Don't know too much about this motherboard, but it wont run the two cards in SLI. Maybe extra power is needed compared to a Nvidia motherboard, when you run the games at the same settings but with this Fuzion model?
Games are for weaklings! Try troubleshooting computer related problems and you'll get a real work-out.

870a Fuzion GPU Heat Issue

I have 2 9800gt's, they have been in 2 sli boards, and run fine. I started with one, and seemed fine. I put the second card in, and both run about 10c hotter than they ever have.
While gaming the card in slot one gets pretty hot. I've tried turning up the fans from the stock 35% in nvidia control panel, but for some reason the higher setting reverts back to 35% and the card gets still gets hot while gaming.
I've never even had to think of them fans before this lucidlogix stuff.
I'd like to buy a Radeon card, but if it's just gonna run hot..
I took out the 2nd card, and it's back to the the regular temp. It's only when I put in the 2nd card.
AMD 955e/8gb (2x4gb) Corsair Vengance 1600mhz (@1333)/Corsair 750w/2 zotac 9800gt's/newest bios

Don't know too much about this motherboard, but it wont run the two cards in SLI. Maybe extra power is needed compared to a Nvidia motherboard, when you run the games at the same settings but with this Fuzion model?
Games are for weaklings! Try troubleshooting computer related problems and you'll get a real work-out.

Unable to install 64-bit virtual machine on 870A Fuzion w/AMD Phenom X6 proc

Unable to get resolution from support after numerous attempts. I've enabled SVM feature from bios and also updated to latest version with no luck.
Installed Win 7 and running VMworkstation 7 - whenever installing 64bit VMs (eg. W2k8 R2) keep getting error that hardward assist virtualization technology not enabled.
Blew away OS and reinstalled with HyperV 2k8 R2 and not problem with creating 2k8R2 VMs that is 64 bit. Whenever installing any other flavor of 64bit OS, same error occurs.
Anybody that can point me in the right direction would be much appreciated.

Are you dual-booting? The software message suggest you have a software problem.
AMD and Microsoft are not the same kind of buddies Intel and Microsoft are, especially when it comes to 64bit systems.
Is this you? :D http://communities.vmware.com/message/1504136

MSI 870a Fuzion

Hello, I currently just got this new Mobo, and am having trouble with my SLI and how to get it set up.
I have two nvidia GTS 250
one problem is that when I open nvidia control panel, i dont have the option to " Set SLI and PHYSX" it only have the physx portion.
also when I go into the bios I see nothing to enable the SLI option.
the mobo is running with the new "hydralogix" I was wondering what i need to do, to use both my nvidia graphics cards.
anyways if someone could get back to me asap and give me a hand that would be great. thank you!
Josh

Fuzion Multi-GPU Mode is actually not the same as SLI. The effect will be similar, but it is really not the same:
http://www.lucidlogix.com/faq.html
Make sure you use the latest drivers:
http://www.lucidlogix.com/driverdownloads.html

MOVED: 870A Fuzion AMD 770 ram 1600mhz (non oc)..HELP..!!

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=149003.0

You might be able to get the ram to run at 1600 by doing the following: go into bios(pres "delete" key when booting) got to "cell menu"
go to "FSB/DRAM RATIO", Set to "1:4". You might have to change timings to crucial specs. save and exit. That SHOULD bring you ram to 1600.
Bas is right that current AMD chips do not NATIVELY support ram speeds over 1333, which IS overclocking. I have my supertalent 1333 ram at 1600 with NO issues at all. your milage may vary. You should also post your system specs like in our sigs below our posts. VERRY IMPORTANT. See posting guides please.

870A FUZION general question

Just have a question about this board.......What is this "hyper drive" utility that shows up when the pc is booting? After starting "AHCI drive detection, shows the message "press ctrl+a to enter hyper drive utility". What is it, and how to use it? Any info would be helpful. This is not documented in the manual at all. ( at least that I could see) Thank you.

http://forums.amd.com/forum/messageview.cfm?catid=383&threadid=125343

870A Fuzion second pcie slot

Can a pcie x1 sound work in second pcie x16 slot?
I have an asus xonar dx that I cannot seem to get to work in that slot. I have to use pcie x1 slot right next to mu gfx card, which interferes a bit with the air flow. If there is a way to use the other x16 slot for this purpose, would be great. If not......oh well no biggie.
any help appreciated. thanks

Well, Svet, as I stated in original post, I already tried. No luck.....I was wondering if there is something specific to the mobo I needed to do. It is said that you SHOULD be able to do this with ANY pcie x16 slot, on any motherboard, but maybe not with this board because of Lucidlogix hydra chip. I don't know.....maybe I will contact MSI and see if this is the case. Thanks for the prompt response though. Can you keep me posted if you find out before I do? That would be cool, and thanks in advance.

HD6870 No signal on My 870a fuzion

Similar Messages

Maybe you are looking for