HD7970 Lightning issues ( mainly in 2D mode )

Hi all,
This is my 1st post here and I start from issues with new card as I have no more ideas how to solve it.
I have HD7970 Lightning for about a week now and card is acting really weird. I thought that's driver issue but now I'm not really sure about it.
Generally issues are freezing in random situations, black screen or vertical stripes in random colors. Mainly while using web browsers but not only so usually when card is switching from 2D to 3D.
I checked some drivers and it looks like this:
12.1 - can't see card
12.2 - not tested yet
12.3 - stable in 3D after about 3h playing games , from time to time crash in 2D like once per 2-3h
12.4 - freezing or artifacts in 2D , random crashes in 3D
12.5 - about the same as 12.4
12.6 - about the same as 12.5
12.7 - can't even run benchmarks on stock settings, freeze while switching to 3D
Each time I uninstalled old drivers and in most cases cleaned what's left with ATIMan.
I was testing mainly on Rampage III Extreme based PC that is my daily rig and fully stable with any other cards. PSU is Corsair 850 HX but also checked on OCZ-Z 850 Gold. System - Win 7 64 bit.
Some fast tests runned also on Maximus V Gene where I notice the same issues in 3D on Cat 12.4 and 12.6 ( I didn't think then that 2D is crashing too since I was running mainly fast tests in 3D ).
My main question is if I can solve it in any way or I just got defective card ? Card has about a week and since I got it I'm almost only trying to find out how to make it stable on even stock clocks.

Some thoughts.
Differing versions of drivers yield different results. Thus drivers may not yet be optimized for these latest cards.
We suggest Driver sweeper to ensure that all previous are indeed removed. >>Driver Sweeper<<
Maybe not directly related to my first thought, but, do the MB BIOS and also the drivers provide full backwards compatibility with these PCIE3 VGA cards ? Yes, they should be backwards compatible.
If at all possible, I would suggest having the card tested on a MB with PCIE3 technology to see if the card itself is defective or not.
EDIT: I did see one of the later BIOS version for your board mentioning something about boosting 2D performance.    But that is not for discussion on this forum. Just a hint,

Similar Messages

  • MSI HD7970 Lightning Randomly Gray Screens A Few Times A Day...

    So I have had this video card for a few weeks now. The MSI HD7970 Lightning will randomly gray screen for no reason not even under any video game load. After playing boarderlands 2, mass effect 3, and eve online or any game for that matter it would not randomly colored screen on me. I suspect only when it goes into 2D mode and the clocks/voltage fluctuate is the reason it freezes.
    I have cleaned out all the drivers, used AMD 12.10 drivers twice, used MSI afterburner to set the profile clocks to a lower 2D speed from the 3D profile, set the voltage to stay constant, and benchmarked the hell out of it and it will not freeze until some random time when its not doing anything. !!!  This is driving me crazy. Does anybody have any ideas what could cause this?
    The MSI HD6970 that it replaced never did this kind of stuff. Thought it was a driver issue but 12.6, 12.8, and 12.10 did the same thing. It has to be the profile state or something weird left behind in windows that's causing it to go crazy at random hours for no reason.

    Quote from: Svet on 30-October-12, 02:09:41
    ok, vbios is up to date. [latest legacy version.]
    have you checked monitor cables to ensure that they are filled well?
    have you tried to reseat the card too? and to Load BIOS defaults?
    No way its a hardware issue. Happens on 2 different boards. Connections are screwed in tight, they don't move. Has something to do with the profile states between 2D and 3D or the factory overclock needs more voltage to stabilize. Something weird happens when P-State randomly changes under conditions that can't be replicated. Its totally random. No stress test can replicate it or benchmark can duplicate it. I might end up trying MSI drivers if it randomly colored screens of death happen again. About due for a windows reinstall. But its weird other people have similar issues. (Don't like blue screens of death?, we have you covered with... gray, black, purple, and gray/black dotted lines for your entertainment.)

  • Latest HD7970 Lightning BE Bios

    Hi
    I'm looking for the latest bios for my card. I have the HD7970 Lightning BE. Both must support UEFI as well   
    Serial Number:   002-V278-05SB1209117253
    Could you please send me both bios's (LN2 and normal). Also going to need some help. Which bios is which when I flip the switch?

    here are they
    170 normal[original]
    180 ln2
    Quote
    Also going to need some help. Which bios is which when I flip the switch?
    the flip positions are named: original/ln2

  • Report Builder 3.0 launch issue in SharePoint Integration mode

    Hello,
    I'm facing issue when opening the report builder 3.0 tool. Report server is configured in SharePoint Integration mode. I already have the FQDN configured for report server and in SharePoint (AAM) but still it fails when the end user is trying to access
    the report builder 3.0.
    Just to brief on the instance setup;
    SQL box setup
    1. Windows Server 2012 R2 Standard/Enterprise edition with latest service packs and updates
    2. SQL Server 2008 R2 Enterprise edition with all features except Reporting Services installed and configured
    3. SQL Engine and Agent are configured in service account (domain account)
    Web box Setup
    1. Windows Server 2008 R2 Standard/Enterprise edition with latest service packs and updates
    2. IIS enabled with all the features
    3. SharePoint Foundation 2010 with SP2 installed in advanced mode and the database server is mentioned as above
    4. Farm is configured with domain account (farm account)
    5. Default site is configured with domain account (site account)
    6. Authentication used for default site is NT domain accounts
    7. AAM is setup for default site to use the FQDN (server.domain.com)
    8. SQL reporting services is installed (only) with service account (same account used which is configured in the SQL engine and agent in database server)
    9. Reporting Services add-in for SharePoint Foundation 2010 is installed
    10. Reporting Services is configured to use the FQDN, email settings is configured
    11. SharePoint Foundation 2010 is configured to use the Reporting Services (General Application Settings) by granting the access to database, integration the report server URL with windows authentication (used the SQL reporting services service account)
    12. Report Web services when clicked, open the Reporting Services window properly where it shows the SharePoint default site URL and on click shows the proper folders configured for use for reporting services
    13. Report Builder launch URL is specified as /_vti_bin/ReportBuilder/ReportBuilder_3_0_0).application
    14. IIS restart done, SQL Reporting Services restart done, even web server reboot done
    15. When supplied the URL in browser as
    http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder_3_0_0).application it start the clickonce window but after this immediately throws the error message as below.
    16. Also, I tried to open the Report Builder 1.0
    http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application it fails with same error message.
    17. After debugging several times, I am unable to resolve the issue.
    18. I tried re-installing the Reporting Services (first uninstalled, then reboot, then folder cleanup, then install Reporting Services) but no hopes and the issues remains same as "The remote server returned an error: (500) Internal Server Error."
    19. Also, I tried with the fresh machine, wiped out the VM, installed OS, IIS, SharePoint Foundation 2010, SQL Reporting Services, etc. again no luck, the issue remains same as "The remote server returned an error: (500) Internal Server Error."
    Error message when launching the Report Builder tool
    PLATFORM VERSION INFO
     Windows    : 6.1.7601.65536 (Win32NT)
     Common Language Runtime  : 4.0.30319.18444
     System.Deployment.dll   : 4.0.30319.18408 built by: FX451RTMGREL
     clr.dll    : 4.0.30319.18444 built by: FX451RTMGDR
     dfdll.dll    : 4.0.30319.18408 built by: FX451RTMGREL
     dfshim.dll    : 4.0.41209.0 (Main.041209-0000)
    SOURCES
     Deployment url   :
    http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application?model=http://server.domain.com/XXX%20Report%20Models/XX%20Report%20Models/XXX%20XXX%20Report%20Model.smdl
    ERROR SUMMARY
     Below is a summary of the errors, details of these errors are listed later in the log.
     * Activation of
    http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application?model=http://server.domain.com/XXX Report Models/XXX Report Models/XXX XXX Report Model.smdl resulted in exception. Following failure messages were detected:
      + Downloading
    http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application?model=http://server.domain.com/XXX Report Models/XXX Report Models/XXX XXX Report Model.smdl did not succeed.
      + The remote server returned an error: (500) Internal Server Error.
    COMPONENT STORE TRANSACTION FAILURE SUMMARY
     No transaction error was detected.
    WARNINGS
     There were no warnings during this operation.
    OPERATION PROGRESS STATUS
     * [9/19/2014 4:42:13 PM] : Activation of
    http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application?model=http://server.domain.com/XXX Report Models/XXX Report Models/XXX XXX Report Model.smdl has started.
    ERROR DETAILS
     Following errors were detected during this operation.
     * [9/19/2014 4:42:16 PM] System.Deployment.Application.DeploymentDownloadException (Unknown subtype)
      - Downloading
    http://server.domain.com/_vti_bin/ReportBuilder/ReportBuilder.application?model=http://server.domain.com/XXX Report Models/XXX Report Models/XXX XXX Report Model.smdl did not succeed.
      - Source: System.Deployment
      - Stack trace:
       at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
       at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
       at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
       at System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri& sourceUri, String targetPath, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
       at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions
    options, ServerInformation& serverInformation)
       at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions
    options)
       at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
       at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
      --- Inner Exception ---
      System.Net.WebException
      - The remote server returned an error: (500) Internal Server Error.
      - Source: System
      - Stack trace:
       at System.Net.HttpWebRequest.GetResponse()
       at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
    COMPONENT STORE TRANSACTION DETAILS
     No transaction information is available.
    Thanks & Regards,
    Mahesh Dhinge

    I have resolved this issue as it was mainly due to the integration of reporting services to SharePoint Foundation.
    Thanks,
    Mahesh
    Thanks Mahesh Dhinge

  • Issue: Main speaker doesn't work after 2.0 and new apps installed

    I'm having problems with the main listening speaker on my phone after updating to 2.0 and downloading a couple of radio stations programs. I can hear anything from this side, I have to set this as speaker mode in order to hear the person that I'm calling. I uninstalled all the applications and still have the same issue. Is anyone experiencing the same issue?

    Thank you, that fixed my problem. Apple should upgrade my phone for free.

  • Weird screen issues in full screen mode

    This problem here could as well be posted under the MacPro section, but I'll give it a try here first:
    I have a brand new MacPro 6-core with the HD 5870 graphics card option. I use a dual screen setup with a Cinema HD 23" (Aluminium body) hooked up using the Mini Display Port Adpater and a brand new NEC PA241W hooked up using the big DVI connector.
    The Cinema Display is secondary, while the NEC is primary.
    Everything runs fine until I go to full screen mode in Aperture (3.1). As soon as I use one of the floating windows of Aperture (like when pressing "H" or when using the Crop Tool) the image, which is displayed full screen on the NEC while having the browser on the ACD, starts to behave very awkward. When using the crop tool for example, it will get reduced to about 80% of the full screen size. When I move the mouse somewhere on the ACD it gets back to full screen. This then goes back and forth every time I move my mousepointer somewhere.
    Similarily, when I start to edit a few sliders with the Adjustments panel, the NEC image sometimes gets darker for a split second and then back up to normal brightness. Same here: when I move the mouse pointer on the ACD, it usually triggers this in any kind of way.
    As you can imagine, there is no way of working fluently and it gets on my nerves pretty fast, making full screen view unusable. In the normal window view, there is no such behavior at all.
    I have the feeling, that there seems to be something wrong with either the HD 5870, it's drivers, something in Aperture itself (no problems in any other Application so far) or any combination of all of the above together.
    Before this setup I used a iMac with the ACD attached and never had any issues.
    Any ideas?

    - it's just one card, the optional HD 5870
    - I switched the primary/secondary between the NEC and the ACD and also switched the way they connect to the GC, still the same. So it occurs on the ACD as well and it does not matter if either display is connected using the DVI or the Mini Display Port (therefore I think it's not a display issue)
    - I always update everything right away, so my systems are always running the latest of everything, OS X, Aperture...
    - I used the profile which was default for the NEC and a calibrated one for the ACD. But since it occurs on both monitors, I don't think this is an issue. It is highly unlikely that there are two broken profiles at the same time causing the exact same bug
    Meanwhile I got an answer from somebody in another Mac forum and he could reproduce this behavior on his MacPro, which is from 2008 and has the 5770 card. So it narrows down even further and seems to affect older MP's and the 5770 card as well. I'm indeed glad that somebody else experiences the same, because I was worried that my brand new MP was broken.
    Here are the exact steps how to reproduce it (you need a MP + Aperture + 2 Displays):
    1. go to full screen with "F"
    2. enable the HUD using "H"
    3. lock the HUD to the viewer using the small button in the upper right corner of the HUD
    4. activate any of the quick brushes, like dodge or burn
    5. the picture, which should be full screen on the primary display, will now reduce in size to about 70% and will be sitting on the right hand side of the screen
    Message was edited by: Taverner

  • WebView weird rendering issue (Color rectangles) - Debug Mode

    Hi,
    i got a problem with a JavaFX Webview.
    Everything loads fine, but every single Element in the DOM of the page (including the body) is overlayed with a random colored rectangle when hovered.
    After a few seconds the entire page is renders unreadable and is only a freaky mix of colors.
    It does work without problems in the JavaFX Ensemble Example so i think it can't be a javafx probleme but i am doing something wrong somewhere else in my application.
    The initialisation code is the same as in the example:
    webview = new WebView();
    previewStage.getChildren().add(webview);
    final WebEngine webEngine = webview.getEngine();
    webEngine.load("http://www.google.de");
    Thought it might be an stylesheet issue, but i removed all stylesheets and it still looks the same.
    I attached some pictures how it looks.
    http://www.tinyuploads.com/images/31lf1b.png
    http://www.tinyuploads.com/images/UxK8wZ.png
    I appreciate any help.
    Thank you!

    THANK YOU VERY MUCH.
    This solved my problem and it was driving me crazy. :-)
    For Future reference:
    WebView enters a debug mode when logging is set to a level higher than FINEST.
    You can change it for the particular class using these lines:
    Logger logger = Logger.getLogger( WCGraphicsPrismContext.class.getName() );
    logger.setLevel( Level.OFF );

  • Imac won't start up n issues in single user mode

    Imac won't start up after long time 'frazing' of Firefox. Manual start up ended up in the grey screen forever'processing' icon.
    Had a look at other solutions, unable to enter safe mode. Someone mentioned to try single user mode and it went through half way  with error messages on the screen which has no command line available for me to key in any letter.
    My Imac has been out of warranty coverage for a while, how do I know if it's hard ware problems before paying for service?
    Any help would be appreciated!
    Alice

    Yes, I have backed up and deleted old files using target disk mode with an old macbook.  It's just the larger files I didn't have enough space and disks for.  I really appreciate your help on this as I've never had any mac issues before this so am not really sure what to look for.

  • 10.6.4 major issues with 64-bit mode?

    I happened to check my "32-64 bit Kernel Startup Mode Selector" app today and noticed that my MBP was running in 32-bit mode and set to always boot into 32-bit mode. This was not how it was under 10.6.3. I've had my machines set to automatically boot into 64-bit mode ever since Snow Leopard arrived so this was wierd.
    But then, just clicking on the 'start in 64-bit mode' option raises an error message (error code -5000).
    So I manually edited the com.apple.boot.plist file to boot into 64-bit mode, rebooted, and found I was still in 32-bit mode.
    But the very worst problem of all is that when I force 64-bit mode on boot (holding down the '6' and '4' keys still works) the machine then hangs after waking from its first sleep. But it runs fine in 32-bit mode.
    Has anybody else discovered this? I will try to redo the update using the combo update but isnt this wierd?

    Hi, I noticed the same behaviour just yesterday. My macbook pro did not boot at pure 64bit as before and I too think this started with the 10.6.4 upgrade (performed 10 days ago). That said, I cannot replicate the hang after return from sleep issue you describe.
    I am not sure which method you had used, with 10.6.3, to force the system to always boot with a 64bit kernel and extensions but here is what worked for me.
    I re-issued the command I used to achieve this with 10.6.2, in terminal:
    sudo defaults write /Library/Preferences/SystemConfiguratio/com.apple.Boot \
    'Kernel Flags' 'arch=x86_64'
    this did not restore the 64 bit boot but it did fix a problem with a series of error log entries I was getting about /Library/Preferences/SystemConfiguration/com.apple.Boot
    Specifically, I noticed that this file, which was xml-formated before re-issuing the above command, was re-writen in a binary format when I checked it again after re-issuing that command -- and the errors in the system log were no longer reported. A wild guess, but I wonder if Apple changed the spec for 10.6.4, disabling the stored forced-boot preference as a side-effect.
    In any case, even after this, the system still started up in hybrid mode. I finally fixed it, by issuing this in terminal:
    sudo nvram boot-args=”arch=x86_64″
    I am not sure if this alone did it, or if it was a combination of the two, but this is the third time I've restarted and my system consistently boots with a 64bit kernel and extensions.
    I hope this helps, good luck!

  • Cisco Aironet 1200 LAP Issues - LAP to Autonomous Mode

    Greetings! After purchasing 4 of the Cisco Aironet 1200 G Series WAPs, I'm now running into a slight issue with them.
    I received these last week with the understanding that if I didn't have the Cisco controller device, I could convert them from being the Lightweight Access Point, back to Autonomous mode with an IOS.
    With this, I checked the documentation that came with the device and found the "Upgrading Autonomous Cisco Aironet Access Points to Lightweight Mode" or http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=Getting%20Started%20with%20Wireless&needs_authentication=yes&CommCmd=MB%3Fcmd%3Dadd_discussion%26mode%3Dshow%26needs_authentication%3Dyes%26location%3D.ee7c7c3.
    From there, I followed the instructions listed under Converting a Lightweight Access Point Back to Autonomous Mode. Before the rename of the file, I checked the device and found AIR-LAP1242G-A-K9 for the Model No.
    One of the Cisco Certified admins here was able to obtain the latest build for the IOS for the device or c1240-k9w7-tar.123-8.JEB1.tar. Per the instructions, I renamed the file to coincide with the model of the device.
    I followed the instructions from there, and it looked as if everything was going well. However, after the upgrade, I'm running into an issue with the following:
    File "flash:/c1200-k9w7-mx.123-8.JEB1/c1200-k9w7-mx.123-8.JEB1" uncompressed and installed, entry point: 0x3000
    executing...
    At this point, the device just locks up. All lights are lit green on the device. According do the documentation, it should reboot and from there, I should be able to access the web interface by IP.
    I've tried to perform the upgrade again using the same IOS build, but the same thing happens with the lock up.
    At this point, I'm assuming the issue is with the build of the IOS that I have and I may have to look at getting an older build. However, before doing so, I thought I would post something here to see if anyone had an idea.
    I may have needed to refine my searching of the forums, but wasn't able to find anything in relation to my issue. If there is something out there, I do apologize for the post and will happily refer to any current information.
    If you need any further information in relation to this, please let me know. Any assistance is greatly appreciated. Thank you!

    Hi Jeffrey,
    Reverting the Access Point Back to Autonomous Mode
    Have a look at Step 3
    http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
    You can convert an access point from lightweight mode back to autonomous mode by loading a Cisco IOS Release that supports autonomous mode (Cisco IOS release 12.3(7)JA or earlier). If the access point is associated to a controller, you can use the controller to load the Cisco IOS release. If the access point is not associated to a controller, you can load the Cisco IOS release using TFTP.
    Using a TFTP Server to Return to a Previous Release
    Follow these steps to revert from LWAPP mode to autonomous mode by loading a Cisco IOS release using a TFTP server:
    Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30.
    Step 2 Make sure that the PC contains the access point image file (such as c1200-k9w7-tar.122-15.JA.tar for a 1200 series access point) in the TFTP server folder and that the TFTP server is activated.
    Step 3 Rename the access point image file in the TFTP server folder to c1200-k9w7-tar.default for a 1200 series access point, c1130-k9w7-tar.default for an 1130 series access point, and c1240-k9w7-tar.default for a 1240 series access point.
    Step 4 Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable.
    Step 5 Disconnect power from the access point.
    Step 6 Press and hold MODE while you reconnect power to the access point.
    Step 7 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds) and then release.
    Step 8 Wait until the access point reboots, as indicated by all LEDs turning green followed by the Status LED blinking green.
    Step 9 After the access point reboots, reconfigure it using the GUI or the CLI.
    From this doc;
    http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
    Hope this helps!
    Rob

  • Macbook 2010 mid , having issue when in sleep mode under windows8

    Hi, guys
    It might be a bit early for this kind of question as windows 8 is not official released.
    I installed the MSDN version of windows8 (RTM), and it works fine and i got bootcamp installed without any problems.
    The only problem I have with it is when I set my macbook in sleep mode, it turns to sleep, but after certain hours, it automatically shut itself down. No matter it turns to sleep by doing it manually or close the lid, this is under power mode, one thing I find funny is if the macbook is on battery mode, it works fine, I turn it to sleep mode in the night and in the morning, it is still in sleep mode, but if I plug in the power, it stops working, it always shut itself down after 4 or 5 hours. I checked all the settings and did not find any setting that are related.
    Any ideas?? maybe the bootcamp is not supportted well in windows 8???
    Please advise. thanks guys.

    Just to give an update on what actually happened, the logic board was knackered and needed to be replaced (with labour, this should have cost £410)... On a Macbook Pro which was almost exactly a year and a half old. I believe this is actually a lot more common than it probably should be (from doing a seach to find other people in similar situations, as well as court cases). Though, thankfully if you buy the product through Apple, they're happy to sort it out with no cost to yourself and no issues (providing the laptop is in good condition and less than 6 years old). Mine was actually from Tesco, and luckily enough there wasn't too much difficulty in getting a partial refund to cover the cost of repairs, though I believe this isn't the case with some other retailers, though Apple themselves are trying to change this and be as helpful as possible.
    So, basically, I'm leaving this information here incase anyone should happen to find this by doing a search of similar symptoms to those I had. If you find out your logic board has gone and your 1 year warranty is no longer valid, pursue the retailler who you originally bought the product from. By law in the UK (under the UK Sales of Goods Act.) they have to help you out as your electrical goods should last 'a reasonable amount of time', which is anything up to 6 years. Hopefully there are similar laws and consumer rights in place in other countries too. Again, Apple are very much aware of the situation with the logic boards so will more than likely help you out as much as they can.

  • Issue with the Authentication mode:

    Hello Guru's
    I have installed P6 Primavera and when I am trying to login to
    http://localhost:8080/primaveraweb/action/login
    It is giving the below error -
    "Primavera P6 was configured to use a different authentication mode that the database selected"
    I checked the authentication mode in the P6 Administrator scrren where it shows that the
    Authentication
    Mode: NATIVE
    Web Single Sign-On
    User Name Header Key: OAM_REMOTE_USER
    Context Path Override: /primaveraweb
    Server and Port override: http://<hostname>:8080 ----- I can see the correct hostname address.
    Gurus, please help me on this ASAP.
    Thanks
    Venu

    Hello Guru's,
    I could able to resolve the error by following the Admin Guide.
    This error is because you have migrated the PSUP database which is having the LDAP authentication mode, but the P6 Primavera is in NATIVE authentication mode.
    NOTE: A configuration for P6 Web Access might include database instances that are not set to the same authentication mode as the server of P6 Web Access.
    If a user connects and requests a database that is set to a different authentication mode than the server of P6 Web Access, an error message displays.
    The user must select a database that matches the authentication mode set for the server of P6 Web Access.
    I resolved the issue using the below steps:
    Run the D:\Oracle\installers\Enterprise Project Portfolio Management\P6_70_Client_Applications\install\database\ldap-config\ LDAPCfgWiz.exe
    Login as privuser for PMDB and select the authentication mode as “NATIVE”
    Login as privuser1 for MMDB and select the authentication mode as “NATIVE”
    Bounce the P6 Admin Server.
    Thanks
    Venu

  • MSI ATI Radeon HD 6970 Lightning Issues

    Hi all,
    Back in May I upgraded my 4870's in crossfire to a 6970 lightning, and I have been having some issues since then, but I'm not sure if its down to a dodgy card, or driver issues, and wanted to sound them out before I do anything.
    The issues currently are -
    Actual navigation around Vista is fine. No issues with video playback. Only graphical quirk is in Zune Marketplace, which occasionally has the odd line which seems to streak away from album pictures.
    In games, the line streaking is much worse, and makes them somewhat unplayable. Dragon Age 2, Witcher 2 and Global Agenda, all have the problem. Not sure if streaking or tearing is the correct term really. I'm about half way through Dragon Age 2, and in the mansion house, the streaks radiate away from the characters and most animated objects, the fireplace for example. Haven't started Witcher 2, but this is the same in the tent at the very start, there is also speckles, or purplish dots on dark objects. The same issues occur in Global Agenda, but on a much worse scale. In game video's are fine however.
    Also, in Rift, an odd speckling of pink/purple dots on certain terrain. No big deal, certainly not a game ruiner, was barely noticeable.
    No crashes at all however...
    I have tried cleaning drivers on several occasions and attempted to run the cards using the latest ATI drivers, as well as the drivers that came with the card, and also the drivers listed on the product webpage. I have tried the card with both bios settings, have removed and reseated the card, but nothing improves.
    I have discussed this on the forum of the company that I bought the card, and the general consensus is that its a dodgy card and I should RMA. I wanted to try here before I go down that route, as I really would prefer a working card than having to go down the RMA route, which would be a last resort.
    Thanks!
    Added system details:
    Windows Vista 64bit
    AMD Phenom II X3 Tri Core 720 2.80GHz @ 3.30GHz
    Gigabyte GA-MA790XT-UD4P Motherboard
    Corsair Dominator 8GB DDR3 XMS3 PC2-1600C9D TwinX (4x2GB) Bundle
    Western Digital Caviar Black 500GB SATA-II 32MB Cache - OEM (WD5001AALS)
    Western Digital VelociRaptor 150GB 16MB
    750W Seasonic S12D-750 ATX2.3 Power Supply  
    A Sony blue ray player of some description and also a sony dvd rewriter.

    Yes to driver sweeper, both with MSI drivers and latest ATI drivers.
    Happens in all games I have on the computer, Metro 2033 does not load at all however.
    I have tried with both default clock speeds, and also underclocked, I believe default is 940/1375, I have tried at these speeds, and also underclocked at 900/1325.
    I also tried uninstalling all drivers, installing drivers for one of the 4870's I used in crossfire and trying that, and it allowed me to play the games with no issues.
    I don't have another PC that would fit the card, so can't try it in another pc.
    Only pictures I have access to are small and don't really show the issue, I will try to provide better ones tonight.

  • GTX 275 Lightning Issues - Need Bios

    I have a GTX 275 1792mb Lightning model, the one with the cool dual aftermarket fans. I've been getting blue screens ever since I installed it, and the games run very choppy when applying AA it seems. I've used several sets of msi drivers and several nvidia drivers(including the latest one). It can't be my psu because I was running a gtx295 in this system without issue, so it can't be any components of my system since a gtx295 is basically two 275s.
    I notice that when I first got the card the red/blue/green light would always remain on. When I use the lightning afterburner utility the green led light on the card would stay on.
    And now when I try to launch afterburner it will have these pop windows that say either:
    Error: schmanager==NULL
    and
    VBIOS: Flash_MMIO_MAP DeviceIoControl error
    I'm thinking maybe the vga bios is some how corrupt. I've looked around the net and can't find it. Like I said I've tried all drivers, and even flashed my motherboard bios to the latest version...and flashed it to some older versions just to see if it would make a difference.
    I'd like to rule out the vga bios if possible as a last resort, so if someone has the gtx275 lightning bios please let me get it from you so I can try to resolve this issue. I really don't want to have to return this product back to newegg. I really love the design with the dual fans and heat sink. I tried contacting msi customer tech support but they won't give me the bios, and they say they don't have it which I find a bit odd. I have flashed the vga bios before so I'm not some noob that doesn't know what they are doing.
    I could also make a copy of my gtx275 lightning bios and send it to someone to see if maybe they can figure out if something is wrong with it.

    I'm running a corsair 750 watt PSU
    Q660
    Gigabyte g31 motherboard
    1TB WD Hard drive
    OCZ 1066mhz of ram
    And I recently swapped the lighting with a gtx 260 and see what would happen in the same system. The GTX260 ran games smoothly, and would run furmark fine with the newest nvidia drivers. Swap back the gtx 275 lightning, and games are really slow and choppy especially when you add any kind of AA. The FPS is literally cut in half when I switched to the msi gtx 275. I think it's safe to say that the GTX275 is defective.

  • Armed Asault issues with OpenAl-EAX mode and Sound Blaster X-Fi XtremeGa

    Hello,?Situation:Armed Assault .02 http://www.armedassault.com/Windows XP SP2 Pro Eng with all updateslatest X--Fi WHQL official driverlatest official OpenALgame mode enabled?Problem : randomly missing sounds and issues with sounds placement in 5. ... i would like to know if any else gets these problems with Armed Assault vs X-fi cards?it was better (yet still problematic) wth Audigy 2 ZS?is this driver issue or game development issue ? thanks

    http://www.flashpoint985.com/cgi-bin...ST;f=68;t=5638
    Message Edited by Rad-Wulf on 2-28-200605:42 PM

Maybe you are looking for