Hda error(s) in OEL 5.4 stranges me....

hi!!!
[total issue is listed here| http://www.techsupportforum.com/alternative-computing/linux-support/427457-slow-machine-solution-required.html] . But now i need a command that helps to check my disk(hard disk) and recover it from bad sectors.My all fylsystem tree is under too LVM group.can any one help?
i have posted it in different forum because here we find very advance user(s),and i am very much new to linux.
can any one help?
regards
Edited by: mango_boy on Nov 4, 2009 2:48 PM

I'm assuming that your hard drive is simply a local SCSI device. If you are using a SAN/NAS setup, you'll need to do something different because these errors mean different problems in that setup.
Hard drive media usually has some spare sectors, reserved for remapping bad blocks. However, there are a limited number and this will not workaround a major failure. Still, to salvage what you can:
1.  Boot your installation media in rescue mode.
2.  Do not mount your "/mnt/sysimage"
3.  Run the fsck(8) tool like this:
    # /sbin/fsck -c -c -f /dev/.....
    This will force bad block checking and will take a very long time, so let this run overnight.
4.  Reboot and do a full backup.
5.  Replace the disk.

Similar Messages

  • Error by transporting a Process Chain / Strange

    Hello Gurus,
    i am confronted with a strange situation which i could not understand.
    We transported a PC into the Quality and it was ok.
    Some adjustments were done:
    1. the developer delete the DTP in the process chain before deleting in the dataflow.
        According to my info he save those objects under a request.
    2. He created a neue DTP and save it in a Transport Request.
    3. In the 3. request we save the whole PC.
    We transported 1 with record code 4 but the DTP was not deleted in the QA system
    We transported 2 to do the correction with return code 8.
    We transported 3 with return code 4.
    The old DTP still remain in the PC in the QA.
    By checking the flow in QA, i found there are two DTPs and in Dev another DTP. That means 3 different DTPs.
    Could you please explain what exactly happen?
    How to delete the two DTPs in the QA before transporting the whole PC once again?
    Thanks

    Hi,
    Here are the things that I can think of after reading your post..
    We transported 1 with record code 4 but the DTP was not deleted in the QA system
    >>  Deleting a DTP in process chain will not delete the DTP from the Data flow.
         The DTP will be there in data flow only the varaint calling the DTp will get deleted from process chain.
         This is why you are seeing this DTp in data flow in quality system
    We transported 2 to do the correction with return code 8.
    >>  In this TP you might have transported PC with the new DTP.
          But the new DTP was not moved to quality system causing error.
    We transported 3 with return code 4.
    >> In this TP you might have transported the new DTP.
    Please check what objects were present in eact Transport request and sequence of transports.
    You can check the transport request contents by using T code se01.
    - Geetanjali

  • Premiere Pro export issues. Unknown error messages, extremely slow export times, strange I/O & disk usage

    Hello,
    I'm hoping I can start getting answers to some big issues I've been having running Premiere pro. I've had similar issues with CS6 but it seems like with CC and every recent update, the problem hasn't been resolved, its even worse.
    The main issue I have is seeing the 'unknown error' message everytime I try to export a file. I'm working with RED footage. When I turn off the CUDA support, I can export without the error but my export time goes from a few minutes to sometimes hours in the render time!
    I've looked through pages and pages of forums and there are so many people saying the same thing, with millions of opinions of what the problem is. Regardless, the only thing I tried that worked so far is turning off the CUDA support.
    Now something I recently noticed, is that the difference isn't the GPU usage, I still show GPU being used at 500mb or 1gb out of the 2gb that it has (GTX 680)
    The strange thing is without the mercury playback option, I'm seeing that disk usage and I/O go way down to kbs from a very high number. This would make sense why I'm seeing such huge changes in render times even though it still shows my 6 core CPU maxed out and ram over 40gb out of 64 that are installed.
    Does anyone have a suggestion on what may be happening here? Its the only thing that has plagued my system using Premiere since day one and there seems to be no way around it..

    Best way to get a real answer is go to the Tweaker's Page, download the most recent PPBM benchmark test, and run it. It's a folder that has a resource monitoring/logging program and a PrPro project with files that is short but HEAVY in effects, both AE and PrPro, so it tests all parts of a system's capabilities from disc in/out to GPU capability/use to CPU, fsb, RAM, you name it ... and after sending that back in you get a complete report on where your computer did well and what the choke-points were.
    Also ... over on the Hardware forum is the place where the techies amongst us hang ...
    Neil
    Tweaker's Page ...
    http://ppbm7.com/index.php/tweakers-page
    Hardware Forum ...
    https://forums.adobe.com/community/premiere/hardware_forum

  • Invalid character 0 ... error in xmlparsing??? strange behaviour

    Hello Everyone,
    I am experience a strange behaviour with XML processing in oracle. I have a xml that contains HTML as CDATA
    as the content of a node.
    When the HTML size is greater than 51 KB (or 51. something KB i was not able to find the exact boundary)
    it's giving an error.
    XML Parsing Failer
    LPX-00216: invalid character 0 (0x0)
    I tried to search for null character (chr(0)) but couldn't find one.
    The strangest part is when i am trying with HTML size as 48 KB/24 KB (anyting less than 51 KB) it's getting passed and
    the large HTML ( > 52KB ) is being build manually by copy pasting the small xml again and again. So if the small HTML
    is getting parsed what's wrong with the large html which consist of nothing but the small html again and again?
    When the HTML size is greater than 64KB oracle is throwing error saying node size cannot exceed 64KB which is fine.
    First i thought that it was a character set encoding problem. The HTML is encoded in UTF-8 and the database is in
    WE8MSWIN1252, but it seems that it is not the problem as i have explained above?
    Can anyone help me what am i missing in here?
    Thanks,
    Ru

    What database version are you on?
    Can you provide us an example of XML you are using?
    Can you show us the code you are using to parse it?
    Can you tell us what you are expecting as output?
    Based on your current description all we know is you have some XML and you're getting an error when you parse it. By itself that's pretty meaningless.

  • Errors during boot OEL 5.5 starting a 11.2 instance

    Hello,
    I've installed Oracle 11GR2 on OEL 5.5 and a I created a db instance. How I can see why my db instance is not up? More precisely , how I can get errors messages thrown by procedure that start oracle instance during boot process (I am sure that kind of messages is thrown but I can't see them).
    Many thanks,
    Aurel

    Hi;
    I've installed Oracle 11GR2 on OEL 5.5 and a I created a db instance. How I can see why my db instance is not up? More precisely , how I can get errors messages thrown by procedure that start oracle instance during boot process (I am sure that kind of messages is thrown but I can't see them).For can see your db up or not u can run :
    ps -ef|grep lg
    oracle 6750316 1 0 Feb 28 - 0:03 asm_lgwr_+ASM
    oracle 9437238 14418146 0 16:06:56 pts/3 0:00 grep lg
    oracle 14745644 1 0 15:50:41 - 0:00 ora_lgwr_orcl
    So my asm instance and db instance is up
    For alert or error message you need to create one sh which is cheking alert.log,if you hit ORA error than it can send u email
    Regard
    Helios

  • Error -50...ipod acting strangely...help needed as soon as possible

    my dad had bought a second generation i pod shuffle frm tokyo about a month bak.i has bn workin absolutely fine for a month,but now a problem has sprouted.wenever i connect my ipod to the pc,a new drivein "my computer" appears called "my ipod G:".after a few seconds,iopd stops blinking orange and the drive simply disappears.meanwhile,itunes asks me to update my ipod software.wen i click on download,itunes says it cudnt contact ipod software server.internet is not connected..even internet is connected.
    then ipod starts updating.wen its complete,i press autofill,frm music.(itunes version-7.0.2.16).then all the songs come wid a dot,instead of the usual "processing" sign.
    then itunes says..
    "the ipod cud not be updated.the disk cud not b read from or written to."
    hen again,ipod starts updating,and an error comes"ipod cud not be updated.an unknown error occured(-50).
    he prob wid restore n update in the ipod settings is bearable,but this syncing problem is irritating.
    plz help soon......
    compaq presario   Windows XP   256 mb ram,2.93 ghz

    see if this helps
    http://discussions.apple.com/thread.jspa?messageID=3574838&#3574838

  • Glibc error when installing OEL 5.8 packages for 10g install

    Hi, I have the following errors occurring when installing the pre-requisite packages for a 10g install. I'm following the instructions on
    http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php
    file /usr/lib/gconv/libISOIR165.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
    file /usr/lib/gconv/libJIS.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
    file /usr/lib/gconv/libJISX0213.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
    file /usr/lib/gconv/libKSC.so from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
    file /usr/libexec/getconf/POSIX_V6_ILP32_OFF32 from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
    file /usr/libexec/getconf/POSIX_V6_ILP32_OFFBIG from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
    file /usr/sbin/iconvconfig from install of glibc-2.5-81.i386 conflicts with file from package glibc-2.5-81.i686
    [root@oravm1 Server]# rpm -Uvh glibc-2.5-81.i86.rpm
    I'm not sure what to do as the 10g install complains that the glibc package is not installed as a requirement for the db software install.

    yum list glibcLoaded plugins: rhnplugin, security
    This system is not registered with ULN.
    ULN support will be disabled.
    Installed Packages
    glibc.i686 2.5-81.el5_8.1 installed
    Available Packages
    glibc.i386 2.5-81.el5_8.1 el5_latest
    Should I really have the i686 version installed?
    The 5.8 install includes the i686 version and the i386 version. Perhaps only the i386 version should have been installed. Am I right? If so should I remove the i686 version and how?
    yum install glibcLoaded plugins: rhnplugin, security
    This system is not registered with ULN.
    ULN support will be disabled.
    Setting up Install Process
    Package glibc-2.5-81.el5_8.1.i686 already installed and latest version
    Nothing to do
    [root@oravm1 ~]#
    Also.....
    The install warned that the swap was not lareg enough, I recall something like 2.7GB when I have actually made it 2GB.
    And the other things was ....
    Checking for shmmax=536870912; found shmmax=33554432
    The instructions I followed say nothing of setting this so high.
    Edited by: ImiDataMan on Apr 11, 2012 4:49 PM

  • Update Error and now computer is acting strange

    ok so i was downloading the new update from mac. I left my Macbook Pro by itself for a while and came back to see just a blue screen. I left it for a while and it was still blue having never restarted. I have no idea if the update was successful now. And now when i boot my mac 3 windows pop up and say "the disc you inserted is not readable. and when i go into disk utilities instead of saying Macintosh HD it says disk0s2. I think my computer is acting normal besides that and i purchased this mac only a few months ago. How do i fix this or make it go back to normal?
    I have time machine too in case i have to do something drastic.

    ok this does not seem to have anything to do with the update.
    i just read this
    Mac OS X 10.5: Disk Utility's Repair Disk Permissions reports issues with SUID files
    2008-06-06 21:34:10 GMT
    Products Affected
    Mac OS X 10.5
    Symptoms
    The following messages may appear in the Disk Utility log window when repairing disk permissions.
    Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
    Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    "Any message that starts with: 'ACL found but not expected on...'."
    Resolution
    You can safely ignore these messages. They are accurate but not a cause for concern
    i ran disk utility and saw that and my friend thinking he knew what he was doing told me to delete all the files in the paths described when i called and asked him what it meant. well now im trying to restore the files but my harddrive doesn't show up anymore because of this issue. i have a big problem now.

  • 11.2 oracle instance doesn't start on OEL 5.5

    I installed Oracle database 11.2 on OEL 5.5 . I created a instance an I want to set it to start automatic in a way described here http://download.oracle.com/docs/cd/E11882_01/server.112/e10839/strt_stp.htm#BABGDGHF. My oracle instance doesn't start automatic at boot time .
    But because messages that oracle software give it to me at boot time is very few , I tried to execute manually the procedure that starts oracle instance , /etc/init.d/dbora .
    It gives me the following output :
    /etc/init.d/dbora start
    + ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
    + ORACLE=oracle
    + PATH=/usr/kerberos/sbin:/u01/app/oracle/product/11.2.0/dbhome_1/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin:/u01/app/oracle/product/11.2.0/dbhome_1/bin
    ++ hostname
    + HOST=linux
    ++ uname
    + PLATFORM=Linux
    + export ORACLE_HOME PATH
    + '[' '!' '' = ORA_DB ']'
    + '[' Linux = HP-UX ']'
    + rsh linux -l oracle /etc/init.d/dbora start ORA_DB
    connect to address 89.136.140.223 port 544: Connection refused
    Trying krb4 rsh...
    connect to address 89.136.140.223 port 544: Connection refused
    trying normal rsh (/usr/bin/rsh)
    linux: Connection refused
    + '[' Linux = Linux ']'
    + touch /var/lock/subsys/dbora
    + exit
    It is strange for me . It doesn't even try to start database , and I do not understand why this error : "connecton refused" .
    I hope someone , that understand what procedure is trying to do , help me understand what mistake I did.
    Thanks,
    Aurel

    Don't post your question to multiple forums.
    You already asked this in the General Linux forum.
    Multi-posting is frowned upon as poor forum etiquette.
    That post has now been deleted, since you state you're using OEL 5.5.
    In the future, if you want a post moved then log in to the site, bring your post up on the screen and click the yellow exclamation mark icon and report "abuse" on yourself. That process works. A site admin will eventually move the thread.
    ... and isn't this other thread actually the same issue?
    Errors during boot OEL 5.5 starting a 11.2 instance

  • Multiplex Error

    I got my DVD made and thought I was home free. I have tried burning a disk directly from iDVD & have tried "Save as Disk Image". I keep getting a ''Multiplex Error". Either way it won't finish burning my movie.
    My DVD is 2.41 GB. I have 250 GB of free space on my computer. I used iMovie HD 6.0.3 and iDVD 7.0.4.
    What else can I try?
    PS I don't have a chapter marker at the beginning. I think I have done everything right. Thanks. Still hoping to get this done by Christmas!

    Hi
    My list of thoughts about this - so far
    *Multiplexing Error*
    PART One.
    Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
    I only use.
    Video - StreamingDV (miniDV tape via FireWire) and
    Audio = .aiff (as on audio-CDs) (else coverted to this .aff 48KHz)
    Using strange letters in video project name eg +,/; etc. keep to a-z and 0-9
    strange letters in project name eg +
    as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
    PART Two.
    from Robert Modero.
    "Multiplexing Error. Problem during initialization of tracks"
    Simply remember to add subtitles to your Quicktime files and menu buttons.
    Once I did that, I was back in business.
    from Boise Jim
    Do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
    I always makes a DiskImage first and test this so that it runs OK
    I use only - Verbatim DVDs
    I use only - DVD-R
    I burn at an as slow speed possibly eg x1
    This gives good DVDs
    PART Three.
    Multiplex Error
    Chuck, Chicago 2/7/2009.
    Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
    2. Disconnect any other external devices not absolutly needed.
    eg external USB/USB2 hard disks, other FW hard disks etc.
    3 Chapter marks in transitions - minimum 2 sec from
    FROM Bev.
    (Not a 'guy' but I will answer!)
    First, I do not think that mixing widescreen and standard makes a difference in iDVD.
    Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
    Also, choose a slower burn speed, 4x or less.
    Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
    From. Boise, Idaho
    I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
    It worked, and I got a clean burn from iDVD.
    Hopefully this can help other people.
    by dheb0422
    Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the uneditited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
    Yours Bengt W

  • Error While Generating the Proxy Objects

    Hi All,
    While Generating the Proxy Obects in SPROXY at SAP R/3 side,
    Iam getting this Error
    http://img169.imageshack.us/img169/5752/proxylm0.jpg
    Can any one Occured this type of Error
    Regards
    Suman

    Hi PT,
    Now the Strange Issue came,
    While generating the proxy objects i got that above mentioned error
    After that i have run the 3 report programs according to the Ramesh Suggession
    Now if i goto SPROXY means it is saying that No Conection to Integration Builder .
    I have checked the RFC Destination created in SM59 of SAP R/3 of Type H.It is fine
    What more i have to check
    First of all when ever i open the Sropxy, every time User & pwd is requesting
    Can you please through a light where to check
    Regards
    Suman

  • Error message "Page header or footer longer than a page"

    Hi
    Our application call crystal report to generate/display crystal report in PDF format. We have a dev system to test this, all looking good, however when we moved to production server, the attached error message is displayed when running crystal report. 
    Invoking method GENERATEREPORT returned error Page Header plus Page Footer is too large for the page.
    Error in File C:\DOCUME~1\SERV
    IC1.LIM\LOCALS1\Temp\temp coq new xxxx.rpt:
    Page header or footer longer than a page.
    Same report doesnu2019t get this error message if running it from crystal report developer. 
    Not all crystal reports got this error, but some of reports display strange view in PDF, the content of report are reduced in a paper size like label size, not A4 size.  I have checked the default printer on the server, it points to a normal window printer, not a label printer. I have checked all possible settings on production server and compared with dev server, all looks same to me
    I suspect the label printing size is used somehow when the report is previewed in pdf format, not normal A4 size although I have selected a normal window printer as a default printer on the window,what else should i check?
    Could you please shed some light on this?
    Thanks!
    Li

    I found the issue is from label printer that is setup on the production server. After I removed the label printer from the server, then error message is gone, all report running fine.
    This label printer is not the default window printer, it is a network printer but is configured as a printer using local port on the server.
    I think for some reasons, crystal report alway picks up the label printer page size, not the normla page size, I am not sure why and how crystal report do this, it should pick up the default printer, which is a normal printer.
    There is no error when I run report within CR. The error happens only when I try to generate crystal report from our application.
    I do have logo in page header/footer, subreports in report footer, but I don't think they cause the problem, because I can run same report without any problem in dev system.
    Any idea what I should check next?
    Thanks

  • Printing Error with Canon MF6500

    I'm trying to print with my Canon MF6500 but I keep getting a printer error saying that there is an error in the connection. The strange thing is that it was working fine a couple days ago. Here are a few things:
    Things I've Done:
    -printed using another macbook with the same USB cord (worked)
    -uninstalled and reinstalled ALL printers (did not work)
    -downloaded the driver from the canon website (did not work)
    -used multiple USB cords
    Things that might have caused the problem:
    -Used a Canon Pixma iP1800 to print
    -Used a HP photosmart C1300 to scan and print
    another thing to note is that when I install the printer it doesn't automatically detect the software anymore, I have to select the proper printer driver (Canon MF6500 UFR II)

    anguonly wrote:
    Maybe the process "UFR II BackGrounder" is the problem but I don't want to shut out something important
    The Backgrounder service provides communication between the UFR2 driver and the Mac. If this service fails to run and connect to the printer then it will cause errors, such as the one you are having. You could look at stopping this service, it will restart by itself, or restarting the Mac will do the same.
    With all that you have done so far I suggest you look at removing the UFR2 driver and associated files and then install v2.21 again. First remove the existing MF6500 printer queue in Print & Fax. Then trash the following files;
    System Volume/Library/Printers/Canon/UFR2
    System Volume/Library/LaunchAgents/jp.co.canon.UFR2.BG.plist
    System Volume/Library/Printers/PPDs/Contents/Resources/CNTD**Z*2.ppd.gz
    Where * indicates a character string that represents the printer model, and 2 indicates a character string that represents the corresponding language.
    Then restart the Mac and install the v2.21 UFR2 driver.

  • Installing Adobe Acrobat Pro - Error 1317 or 1310

    Ok, this is a complicated back-story.  Wasting third day trying to setup my old PC for my mom (new one coming tomorrow).
    So first I did a clean XP install on one partition.  Then through it installed windows 7 on second partition. 
    On the Win7 partition, first time I tried to installed Adobe Acrobat Professional I got an error during install.  I think it was 1310.  Then I decided to try to install Office 2003, got same error about 20% through.  Very strange.  I messed with some folder permissions, ran as administrator, even tried creating an administrator account and installing in there, same result.
    Then I decided to re-install everything again from scratch.  Formatted the disk, made new partitions, installed XP, installed Win7 Pro.  Tried to install office 2003 first, that worked.
    Then tried to install Acrobat 8 Pro again, error 1310.  Then download Acrobat 9 Pro from Adobe to see if a newer version might do the trick.  Similar error 1317, this on about attempting to create a directory in program files\adobe\acrobat9.0\designer8.2\de\templates.
    Interestingly, the story doesn't stop there.  After one of these errors happens, I think it causes some sort of file system error.  One time I got a baloon setup_wm (if I remember right) something about file system being corrupt and unstable.  And if I try to open a browser after that things don't work.  If I reboot, it runs chkdsk and everything seems fine after, but no matter what I try I can't get passed that error.
    Any ideas?

    I had a failure to install Acrobat Pro 8 on a windows 7 machine with several tries and failing with Error 1310 every time until I did this:
    start->type uac in the run box then clik on "Change user account control settings" located at the top of the list
    drag the slider all the way to the bottom, this turns UAC off
    restart the computer
    install your software and get any updates needed
    the turn uac back on and restart
    worked for me

  • ORA-29285: file write error

    Hi,
    We are getting this error ORA-29285: file write error while writing to a text file using utl_file.putf package.
    Using fopen funtion in code to open file as below:
    V_FILEHANDLE:=UTL_FILE.FOPEN(v_file_path,'ABC','W', max_linesize);
    Here max linesize = 32000, so as far as I think, limitation on length of records while writing the file is not an issue.
    Further code is written as:
    UTL_FILE.PUTF(V_FILEHANDLE, v_text1||'|'||v_text2||'|');
    UTL_FILE.NEW_LINE(V_FILEHANDLE);
    UTL_FILE.FFLUSH(V_FILEHANDLE); -- This is called after every 500 lines are written to the file.
    UTL_FILE.FCLOSE(V_FILEHANDLE);
    We are encountering this error every now and then, and strangely this gets resolved when we re-run the program and file gets written successfully.
    Can someone please help on this please?
    Oracle database 11g, version: 11.1.0.7.0
    Thanks,
    Sonam

    Not enough information.
    964643 wrote:
    Hi,
    We are getting this error ORA-29285: file write error while writing to a text file using utl_file.putf package.
    Using fopen funtion in code to open file as below:
    V_FILEHANDLE:=UTL_FILE.FOPEN(v_file_path,'ABC','W', max_linesize);And what value has v_file_path got? Is this the name of an Oracle Directory Object as it should be?
    Here max linesize = 32000, so as far as I think, limitation on length of records while writing the file is not an issue.
    Further code is written as:
    UTL_FILE.PUTF(V_FILEHANDLE, v_text1||'|'||v_text2||'|');
    UTL_FILE.NEW_LINE(V_FILEHANDLE);
    UTL_FILE.FFLUSH(V_FILEHANDLE); -- This is called after every 500 lines are written to the file.
    UTL_FILE.FCLOSE(V_FILEHANDLE);
    We are encountering this error every now and then, and strangely this gets resolved when we re-run the program and file gets written successfully.
    Can someone please help on this please?Not without seeing complete code so that we can try and reproduce the problem or spot where you may be going wrong.

Maybe you are looking for