HDAPSD fails to load. Thinkpad users need help!

Who does use HDAPS (hdd shock protection)? I installed it recently from aur and managed to run it once, after that I can't make it run and get:
Tue Jun 21 10:53:13 2011: Starting hdapsd
Tue Jun 21 10:53:13 2011: WARNING: You did not supply any devices to protect, trying autodetection.
Tue Jun 21 10:53:13 2011: Adding autodetected device: sda
Tue Jun 21 10:53:13 2011: Could not find a suitable interface
or
sudo /etc/rc.d/hdapsd start
:: Starting hdapsd [FAIL]
added to rc.conf:
MODULES=(thinkpad_acpi thinkpad_ec acpi-cpufreq)
DAEMONS=(hal hdapsd @network @alsa)
HDAPS config cat:
# Settings for hdapsd
# DEVICE specifies the device to monitor, defaults to 'sda'
# SENSITIVITY is self explanatory, defaults to '15'
# Set ADAPTIVE to 'yes' to enable adaptive threshold
# (automatic increase when the built-in keyboard/mouse are used).
# Set SYSLOG to 'yes' to have the daemon report errors to syslog
# (instead of stderr/stdout).
# Set FORCE to 'yes' to force the kernel to use the unload heads feature
# on some old hard drives for which support cannot be autodetected.
# (don't use this unless you're absolutely sure your hard drive
# really do support unloading heads)
DEVICE='/dev/sda'
SENSITIVITY='10'
#ADAPTIVE='yes'
SYSLOG='yes'
#FORCE='yes'
Any ideas?
Last edited by tasty_minerals (2011-06-21 15:09:08)

I am currently running Arch Linux on my ThinkPad X41.
I am having troubles trying to get tp_smapi work on my system after the full system update that I did yesterday. I jumped from (12.2010) 2.6.36 to kernel 2.6.39. Since yesterday, tp_smapi was working perfectly, but after the update, it seems that the new kernel cannot recognize the tp_smapi module. I tried to remove and insert it again with modprobe tp_smapi, but I am getting: "FATAL: Module tp_smapi not found" every time.
As I have build tp_smapi from AUR, I removed it with pacman -Rd tp_smapi and installed my package again. Even removed hdapsd and reinstalled it again after tp_smapi and I am getting the same - the module could not be found.
I saw that there is a slightly newer tp_smapi in AUR, but currently I am not able to build the package, as I am getting some build() errors like: "gcc: error -pg and -fomit-frame-pointer are incompatible."
This PKGBUILD seems a patch for 2.6.37 kernel and probably could not build directly under the new kernel. Anyway, I am still not able to bring the good old tp_smapi to working condition.
Anyone with a working solution about this?

Similar Messages

Frustrated: Novice Illustrator User Needs HELP

Frustrated: Novice Illustrator User Needs HELP
Hello All
I am a novice user of Illustrator [after you read my question it will probably be obvious] running Illustrator 14.0.0 (CS4) - on a MAC iMac running 10.4.11. I am a small business owner and have to wear many hats and so I am forced to be my graphic designer by default - ha ha
PROBLEM - If I make a box using the RECTANGLE TOOL... The box should have a point at each Corner and the Middle of the box, as well as, in the Middle of each Side, and middle of Top and Bottom for a total of 9 anchor points... but it only has 5... missing the 4 anchor points in the Middle of each Side, and middle of Top and Bottom. It is the same on Text Boxes too.. I can NOT find a setting to change this.... More, when running Illustrator on my MAC Laptop, It has all 9 anchors on the box... I looked at Preferences etc... and matched everything to be the same but the problem is not fixed?
Any help would be greatly appreciated
Thanks-
13CrazyTrain

Aw, c'mon James. Chill it a bit.
Yeah. You continually throw around your little personal jibes, and then if someone calls your bluff, you think you can back out of it with the old "can't you take a joke?" comeback.
In my previous work environment where everyone used Illie, Freehand was a word to be used cautiously – a bit like Macbeth in the theatre.
Well, I didn't work in your previous environment. And FreeHand specifically had nothing to do with this thread until you brought it up. Seems to me it's you who has a FreeHand chip on his shoulder.
I thought you knew my way of expressing myself better...
What, you think I keep a personality registry of regulars here or something? I'll tell you what I don't do: I don't engage in personal insults here. Yet your personal jibes are frequent enough for me to have grown weary of them.
I think I was not dismissing bounding boxes as useless...
Excuse me? "There's absolutely no need to use bounding boxes"?
You are probably right that bounding boxes came with Illie 9.
Probably before that. But I can personally recall that the current-selection bounding box was present in AI9. Unlike some, I try to avoid making claims that I can't immediately substantiate.
I hopped straight from 6 to 9 and that was the first time I had seen them outside of Freewotever.
I'm not familiar with "Freewotever." But if you're again trying to be funny, you are also again revealing your near complete unfamiliarity with it. FreeHand is not the program that continually cluttered the interface with bounding boxes. In fact, for many years that is exactly one of the distractions FreeHand users complained about re Illustrator.
First off, FreeHand's interface doesn't display bounding boxes. It displays only bounding box handles (four dots) on non-basic constructs like clipping paths. (Somewehere around FH 9, it implemented the optional Transform Handles, but that's another thing.) In the cases of rectangles and ellipses, FreeHand doesn't display Bounding Boxes per se. Working in FreeHand has always provided more functionality with much less visual clutter (and tool glut) than Illustrator's defaults.
The difference is that FreeHand has always provided proper live geometric shape primitives--something which Illustrator still doesn't provide, even though it's one of the most basic of all vector drawing interface expectations, being present in just about any vector drawing program on the planet--except Illustrator. That point of confusion is common among those who are experienced only with Illustrator's chronically outdated and archaic interface.
Quite to the contrary, a rectangle drawn in a program that does provide basic live primitives doesn't need a bounding box to perform the bare-bones basic manipulation exemplified, because you can change the aspect ratio of it (and corner radius) anytime you want, regardless of its rotation. You can do this not only in FreeHand, but Canvas, Inkscape, Xara Designer, and even in just about any basic drawing module of just about any "works" or "office" bundle. It's just Illustrator that still fails to provide live shape primitives, and therefore needs a rotated bounding box to provide a very limited subset of such common functionality. You draw a rectangle (or any other geometric primitive) in Illustrator, and all you get is a dumb path. So Illustrator actually needs bounding boxes more than other programs, because of its anemic core funciton set and its hideous user interface.
But of course, someone who is familiar only with Illustrator wouldn't know that. Which is fine...so long as they don't spew derision at programs they know next to nothing about (and users of such programs).
...bearing in mind that I have been at this job since the days of Rotring pens with nosebleeds.
So? I was using Rapidographs and constructing compound rotation in isometric on the board for about a decade before I came to prefer Staedtler pens because I found them less prone to clog. What does that have to do with anything?
Obviously newcomers should be encouraged to use new features, but preferably not before they have grasped the basics thoroughly. How basic bounding boxes are is perhaps a moot point.
Nonsense. Other self-proclaimed "experts" in Illustrator would no doubt argue that bounding boxes were added for the benefit of "beginners." Again, this is not a "new feature." And yes, it is bare-bones basic; just implemented in a half-baked manner in Illustrator.
As for step 3 you are right, but if you turn off the preview you can use the pixels on the paths for alignment,
Egads. That's really grasping at straws, Steve.
...Or use bounding boxes.
Or use bounding boxes.
JET

Data base problem-new user need help

im new user and trying to insert data base to my page using
"asp.net c",i get connetction to my data base but when i try to
build a form ,and then preview him i get ,the following message
Server Error in '/' Application.
Parser Error
Description: An error occurred during the parsing of a
resource required to service this request. Please review the
following specific parse error details and modify your source file
appropriately.
Parser Error Message: File or assembly name DreamweaverCtrls,
or one of its dependencies, was not found.
Source Error:
Line 1: <%@ Page Language="C#" ContentType="text/html"
ResponseEncoding="iso-8859-1" %>
Line 2: <%@ Register TagPrefix="MM"
Namespace="DreamweaverCtrls"
Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,culture=neutra l"
%>
Line 3: <MM
ataSet
Line 4: id="DataSet1"
Source File: e:\inetpub\wwwroot\Untitled-1.aspx Line: 2
Assembly Load Trace: The following information can be helpful
to determine why the assembly 'DreamweaverCtrls' could not be
loaded.
=== Pre-bind state information ===
LOG: DisplayName = DreamweaverCtrls, Version=1.0.0.0,
Culture=neutral, PublicKeyToken=836f606ede05d46a
(Fully-specified)
LOG: Appbase = file:///e:/inetpub/wwwroot
LOG: Initial PrivatePath = bin
Calling assembly : (Unknown).
===
LOG: Publisher policy file is not found.
LOG: No redirect found in host configuration file
(E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from
E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: DreamweaverCtrls,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=836f606ede05d46a
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET
Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET
Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.EXE.
Version Information: Microsoft .NET Framework
Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
I know its probably something stupid ,so u can lauph,but i
realy cant fix it.
need help
tnx for advance

anyone? please help

"Failed to load the CTDFMRES.DLL" Help, please!

Hello,
I asked how to fix the following error that occurs when trying to add artwork:
Failed to load the CTDMFRES.DLL
Check that CTDMFRES.DLL is in the directory.
Some information provided/gained while working with b noir to diagnose the problem:
As far as I know, there are no third-party plug-ins for connecting to gadgets such as a MuVo or Creative Zen.
The error persists in iTunes Safe Mode.
The error persists if I add a new user account.
Screenshots below to demonstrate how error occurs:
Thank you for your attention and help.

Okay ... perhaps let's check first to see if you can do the artwork add if you open iTunes in Safe mode. For instructions see:
iTunes: Troubleshooting issues with third-party iTunes plug-ins

New MAC user, old Picasa user - need help!

recently purchased my IMAC - and while I have loved it - I haven't loved used iphoto. I'm an old picasa user and when I copied all of my picasa fotos in iphoto - while the pictures transfers all the names and dates of the folders that the pictures were in did not - so they are all randomly scattered through out.
What I would really like to do is use Picasa for Mac and have it recognize my external drive, storing and altering all of the pictures there. Is this possible? I need help!

Sure - you can use any software you choose - you can not use both iPhoto and Picasa - they do not work together
For iPhoto support this is a good pace
For Picasa support yu need to go to the Picasa forums
And note that while Picasa is a very good package iPhoto is a dabase program and is much more powerful - but it does have a learning curve
LN

In iBooks I keep getting the message failed to load resource is missing HELP!!!

In iBooks I keep getting the message failed to load because the requested resource is missing, tried deleting but still happens I can open it on my iPhone 5, but not on my iPad mini, please HELP!!!

Okay I figured out my problem. When you use the "add another email" option in FaceTime (or iMessage now), it associates that email address with your Apple ID account that you logged in under.
The Apple ID that I'm using for FaceTime isn't the same as the one iMessage defaulted to. I didn't noticed that. Once I switched iMessage to use my other Apple ID, it let me register. What's odd though is that iMessage doesn't recognize my email address as valid when I try to send myself a test message. When I logged out and into a different Apple ID, it did recognize it as registered though. Odd.
So Basically make sure the email address you are trying to register isn't listed as an alternate email address (or primary) on another Apple ID account.

VoiceOver user needs help with reminders

I am using VoiceOver and I need help setting up a reminder. I type the name and then go into the details to have it remind me on a day and I can't seem to control what day and time it reminds me on. It always defaults to the top of the next hour. How can I change this to a time I choose?

#3 is even easier
Go to Hub settings, then display and actions and drag down, you'll see the option 'delete'.
Regards.
Blackberry! Here, now, forever!

New User,need help, charging, using, everythi

I recently bought a Zen V Plus and have no tech savy so need help. I've checked with support but don't get th answers I need so thought someone here could help. Here are my questions.
1. Is there anything else that can be used as a charger besides a Zen product. I have several cell phone chargers both for house and can, can any of these be used? need to save money
2. Can the Zen be used while charging? All I get is the docked message and nothing else?
3. I use my player mainly for audio books and the battery doesn't hold for a whole book so I have to charge but when I do the book goes? back to the first part instead of holding my place. I do I hold my place?
Anybody that can give me simple clear answers please help. Because of my age I have trouble reading and the player allows me to enjoy books but I have trouble understanding how to make it work. Don't laugh but my 3 year old grandson would probably have better luck with getting it to work.
Thanks for any help provided

Li'vewolf,
First, no three year old will do better than you can with the player. That said, spend some time reading the tutorials listed under support at the top of this page, and use the search in this forum to find everything you can about the Zen V Plus.
When I shut down my Zen V plus, while reading my current audiobook, I just hit the pause button and then pull down the slide button on the left for "shutting down". Some of my books seem to do better with just a shut down instead of pause first. I have found that the bookmark feature is more trouble than it is worth. I use audiobooks from NetLibrary and Overdri've and a few extra from a forum on audiobooks. It seems that they all work differently when shutting down and holding a place.
Anyway, spend some time trying different methods of bookmarking. The Zen V Plus is fairly forgiving player.
Best Wishes.
luvmyrescuedogs
One more thought for recharging your battery. Try Amazon or eBay for a recharger, if you can't afford the Creative charger, but remember that you can fry the player if you use the wrong one and the warranty doesn't cover that damage. The easiest and cheapest way to recharge is to use the computer.

BB Curve/Mac OS 10.4.11 User - Need help!

Hi
I have many questions.
First -
Pocket Mac
What do I need to DL and install from the BB site?
I have the Blackberry Curve but due to lack of know how I am underutilizing it's abilities.. I need help with this!
There are a lot of choices and I think I may need to DL more than one choice but I just don't know.
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Seems there are a lot of issues. I have no immediate "tech support" [the ex is gone] and am not sure about several things.
What software exactly do I DL and install so I can sync up computer and BB?
Music:
The T-Mobile people told me that the BB could function as an I-pod. How do I UL all my music in my I Tunes library to my BB?
Email/Calendar:
Does the BB sync with gmail? I heard it did. How do I do that?
My MS office 04 Entourage is shot and I can't get a new install from ex so-
Calendar- Does Gmail calendar work?
Photos:
Works with I Photo right? Once I get the right Pocket Mac software?
SAFETY
I read someone lost their phone from installing Pocket Mac.
Word on that? It is my only phone, I don't have insurance on it. I am simply trying to utilize all that it offers and am a bit lost! I can figure stuff out but I worry that I will do that to the detriment of my files and/or device.
Recommendations to help this newbie get acclimated to the digital world?
Thanks!
M

1. You will want PocketMac 4.1 on that list.
2. iTunes are not usable on the BB until you remove the Digitial Rights from them; for instance, you can burn the iTunes to a CD and then burn the songs to a CD and then import them to iTunes and they will be DRM free.
3. It doesn't "sync" but it does reconcile your deleted messages to and from the BB to your Gmail account. However, your sent messages from the BB won't be synced to your Gmail account.
4. Gmail Calendar sync does work.
5. PocketMac works well for many, I have read some who don't like it. You shouldn't really have any problems, especially with it bricking your device.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

New airport user need help setting up a pc on the network

went and bought a airport extream today and my mac works fine on it but i also have a pc and need help getting it to work with the airport express. it seems to see the airport in the network slection screen but after i put in the pass i get nothing and it returns to the "chose a wireless network" can anyone help?

Thanks for the reply.
That's interesting, I guess I had assumed that would be a basic thing.
Right now the 4000 number is in port 1, and then 4244 is in port 2. So if no one else is on the phone, and my boss picks up his phone, dials 9 then XXX-XXXX, he will be routed outbound on the 4000 line on port 1. Then while he's talking, if I pick up the phone and dial 9 then XXX-XXXX, I will be routed out on the 4244 line on port 2.
Am I understanding that correctly?
If that is the case, then that is a bit frustrating. Our 4000 line has everything on it, call waiting, caller id, long distance, etc. But the 4244 line is just a basic service. So if I'm calling local or toll free, I don't want to tie the other line up in case someone else needs to make a long distance call to a client. Is there any work around to that at all? Is there any way to use steering digits to point the call to the right line? Would we have to put the PSTN lines on seperate SPA400's?
Again, any comments and suggestions are much appreciated!
Message Edited by VoIP_Me on 07-30-2008 06:27 AM
Message Edited by VoIP_Me on 07-30-2008 06:28 AM

Safari too slow to load a page, need help

Hi mi name is roberto carlos and i really need help please. Since a time ago my SAFARI has become too slow that i can see the difference. I don't know what to do with it. Please somebody help me, how do i fix it.
Thanks.
Message was edited by: robertinho

Hi Roberto and welcome to the forums!
Try this:
The following usually works on both Tiger and Leopard:
(First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl.)
Many, including me, have had success with adding DNS codes to their Network Settings, with good results in terms of speed-up:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
208.67.222.222
208.67.220.220
Click on Apply Now and close the window.
Restart Safari, and repair permissions.
If that didn't do it, then try this as well:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Repair permissions (in Disk Utility).
Start up Safari again, and things should have improved.
Less likely, but possible, is that the slowness is caused by a Trojan such as the one called 'DNSChanger' or 'OSZ.RSPlug', which can alter the DNS settings of your network connection. This particular Trojan can be inadvertently installed if you have come across certain Quicktime movies where got a window stating that you have to download and install a particular codec in order to see the video.
If you have agreed to that installation, your system can be infected and your DNS settings altered, which results in your system using the wrong DNS servers, which can slow web surfing to a crawl.
This can be fixed by downloading and running a freeware utility called DNSChanger Removal Tool which you can download from here:
http://www.versiontracker.com/dyn/moreinfo/macosx/33696
Once you have run that utility you have to re-boot your Mac, then reset Safari, and re-enter your DNS settings in System Preferences/Network.

New mac user needs help transfering files from Dell...

I have a Dell running Windows XP and need help transfering the files from the dell to the mac.
Also I have no idea what OP system I have, how do you tell which one you have???

Go to the blue Apple menu and scroll down to "About this Mac"
In the summary window that opens you will find the following information:
Mac OS X version (assuming you are running OS X)
Processor speed.
Memory
Startup disk
The More Info button will take you to an in-depth overview of hardware, network set-up and installed software.
As far as transference is concerned, you can either transfer files via CD, DVD, external hard drive... or by networking the two computers.
Here's a link for an overview concerning Mac to PC connectivity:
http://docs.info.apple.com/article.html?artnum=19652
I hope the above helps.
Reagrds
Tony
G5 iMac, G4PB, iMac DVD 450Mhz Mac OS X (10.4.2)

Help - Newbie Mac user needs help removing malware in Safari

I've tried researching this but I haven't found exact steps on how to get rid of different website popping up in my Safari browser. I'm a little gun shy with deleting files, etc on the Mac so I hope you can help me fix this. Or better yet, is there software that will fix it?
Thanks in advance for your help.
Wendy

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Name/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

New Mac User Needs help opening Microsoft office 2007 files on a Mac!!!

I just got a used ibook G4. I had an old Pentium upgrade IBM before. I love my Mac, but I need my old school files form my IBM. I have OpenOffice.org 2.2 for Mac OS X 10.4.11 and I have a file converter program called X 11 that opens with a huge list of options for converting files, but it dose not say Microsoft offices 2007 it says the version numbers. I tryed the latest version and It wouldn't open in OpenOffice.org. Should I use Apple Script instead? I don't have Apple Works do I need it? I just want to look at the files. Why is there not a office viewer for Mac?

You have Tiger. Tiger=10.4.x; Panther=10.3.x; Leopard=10.5.x.
If you are trying with OpenOffice 2.2, it might be worth updating. I have version 2.4, which is the latest. Since 2.4 fixes a security issue, you should update if you plan to use the application anyway.
NeoOffice, as a previous poster pointed out, should be able to open Office 2007 documents.
See the discussion at http://user.services.openoffice.org/en/forum/viewtopic.php?f=5&t=4542 for the main OpenOffice thread discussing this issue. It discusses the ODF converter at sourceforge which NeoOffice uses to open Office 2007 documents. Apparently, you can use it with regular OpenOffice, too, but if 2.4 doesn't come with it (and maybe it does - I haven't checked), it might be easier to use NeoOffice for now.
X11 is not a file converter, by the way. It is the traditional unix GUI. Apple provides a version of this for OS X which enables you to run applications which haven't been ported to the native OS X environment. OpenOffice for Mac OS X uses X11 as do some other applications, such as GIMP, which you may have heard of/used. NeoOffice is a version of OpenOffice ported to the native OS X environment (i.e. it doesn't have to use X11). I haven't used it in a long time - I always use OpenOffice on X11 - but it is supposed to be very good now and should seem very familiar if you're used to OpenOffice. If you can't get OpenOffice to work with your files, you should definitely try NeoOffice before buying MS Office - unless, of course, you especially want to send MS a few hundred of your preferred currency.
The other thing you can try, if you've still got Office on your IBM machine is converting the files there by opening them and choosing "save as...". That should allow you to select an earlier version of Word/Excel/... which OpenOffice should have fewer problems with. Since you may lose formatting this way, try the other options first. (Also, if you have a lot of files, this option will be very annoying to implement.)
I do not think AppleWorks is likely to help. (I'm not sure if AppleWorks is even still available... somebody?) There are some suggestions Pages might help, but I would personally try the other solutions first. (On the other hand, I have a very old version of Pages.)
AppleScript is almost certainly not what you want. It has nothing to do with AppleWorks. It is a scripting language.
Good luck,
cfr

Very new user needs help setting up a three user network plus server

Hi,
I'm an owner/manager of a recruitment company in the UK and we use three mac minis in our office to run our recruitment software (on a filemaker database) internet, mail and MS Office 2008.
We currently use one of the mini's as a 'server' in so much that it has a external HDD attached and shared across the network. We use Airport Extreme to share the internet.
Although to begin with this set up has served us well the amount of data travelling across the network and the prospect of a couple of new employees starting has made me think it's time to invest in a network and server of some description.
With my very limited knowledge i'm proposing the following but would greatly appreciate some assistance from the forum users!
Install OSX 10.5.3 Server on one of the Mac Minis
Get an ethernet switch and cable the three minis together
Use the external HDD as a time machine backup and store all files on the 'server' HDD
Continue to use the Airport Extreme to share the internet over airport.
I have a couple of questions:
Can the Server computer still be used as a desktop or do we need to buy a new mini
Does this set up make the airport base station redundant
As we grow I would envisage enlisting the help of a specialist Mac IT support company but in the mean time any help would be greatly appreciated.
Thank you again in advance.

I would get something better specified than a mini to be my Mac OS X based server, and although you can run it as a desktop I wouldnt advise it.
You ought to go out and buy the book Mac OS X Server 10.5 Essentials - The only Apple-certified book on Mac OS X Server - which Ive found to be a godsend of a book in getting Leopard Server going. Make sure you get the 10.5 version. Im in the UK and got it from Foyles in London.
Your approach is fine, but Leopard Server isnt as plug and go as the rest of Apples products. In particular it just doesnt function correctly if you do not have working DNS before you start. Period. If you dont understand DNS in your office or If having read the book you find its too technical you might be better off buying a no-brand Network File Store/Disk or even a Time Capsule from Apple if its mainly shared disk space that you need.
Angus

HDAPSD fails to load. Thinkpad users need help!

Similar Messages

Maybe you are looking for