HDCP Error with atv2 and Philips TV

I have a atv2 and a Philips TV, everything is working fine, but not iTunes. I bougt 2 films on iTunes (rented) and after a few seconds (1-5 seconds) the films stops and after a while it´s displayed, that my connection does not support hdcp. But that can´t be, becaus I use a blu-ray player on that TV too. I tried with different hdmi cables, I even bought a very expensive and short one, but always the same error. I tried different hdmi inputs, even downloaded a new firmware on the Philps TV, restarted the atv but nothing worked. Now I payed for 2 films for I´m not able to see. Does any one can help me????

I would try testing with another tv to verify the problem is with the tv and not with the atv

Similar Messages

HDCP error with Hulu and Netflix

I've had a Apple TV 2 for a few years now and it has worked great.. Two days ago it stopped playing Hulu and Netflix and Vimeo.. All worked fine up until then.. It continues to give me a HDCP error when I try to use them.. It will try to load the program then after 4secs I get the error.. I have changed nothing on my set up.. I have reset and restored, unplugged the HDMI cable and power cable as well.. No luck.. The only thing it will play is content I purchase or have purchased from Apple.. Is anyone else having this issues.. Any help would be appreciated!!

I would try testing with another tv to verify the problem is with the tv and not with the atv

Aborting index build. Too many errors with finding and copying files ...

Hi dears,
I'm using UCM 11g.
I'm trying to start the automatic update cycle. When i start it, it gives me an error message just like :
Indexing aborted at :<time>. Aborting index build. Too many errors with finding and copying files to the appropriate place.+
Can anybody help me about this problem?
Helps will be appreciated.
Erdo
Edited by: erdo on 28.Mar.2013 11:11

Read this: error in Collection Rebuild Cycle
and maybe also UCM Indexer - Collection Rebuild Cycle errorring out

HDCP error with new HDCP compliant monitor

I just bought a new Asus VE228H monitor. I have a ATI Radeon HD 4200, HDCP compliant video card and I am running Windows 7 and iTunes 12.1.1.4. Even though the new monitor is HDCP compliant, I still get an HDCP error in iTunes. I replaced the cable with a new HDMI cable and I still get the error. I have tried searching online for a solution, but haven't found a solution. Thanks in advance for your help.

SUCCESS ....... for now ......!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i have now got my atv2 unit to power back on - and we can play the rented SD movie which is playing now to a happy family....
No HDCP error message appeared this time.
This what we did to fix our issues....
1) Pressed the HDMI cable more firmly into the HDMI port into TV - this allowed the ATV2 to actually show/reappear onto the tv panel.
2) Plugged both power leads for TV and ATV DIRECTLY into wall. (Previously, we had both AC leads plugged into a 4x multi power board and had this plugged into the wall.
We started the SD movie and no HDCP error appeared and movie is still playing as i type...
Now, to repeat this error/diagnostic, we then plugged the TV power lead back into the 4 x multi power board and plugged the board back into the wall. Immediately, the dreaded HDCP error re-appeared. We then replugged TV back into wall directly and no HDCP error message.
Hypothesis #1 :
Now, this 4 x multi power board also had our DVD player and stereo connected to it. Perhaps our DVD (potential recording device) was being detected and hence the HDCP barrier came up so that we were not able to record this movie.... just a hunch but sounds plausible.....
Hypothesis #2 :
Also, this 4 x multi power board was within immediate vacinity of the ATV2 unit. Possible interference.....
When the 'dust' settles and the family finishes watching the movies, (1 x HD , 1 x SD), i will plug the 4 x multi power board into another AC wall socket way out of the way of the ATV2 unit (around 4m) and try to repeat this error to validate my hypotheses - noted above.
I will report findings later in around 6 hours...
thanks for your help people...

Stumped with HDCP issues with ATV2

Still getting HDCP HDMI errors on NetFlix!
- My TV is HDCP compliant (even upgraded to latest firmware)
- Tried 3 new HDMI cables, including Apple and Monster.
- Did a ATV2 reset
- powered down TV and ATV2, powered back up
- Blueray player works, PS3 works (with Netflix), STB works. ATV does not!
It just is not working.....
Ideas?
New ATV firmware on the way soon?
Rich

I'm having the same issue, although with iTunes purchased content.
My ATV2 was working great, up until 2 days ago, when the HDCP error comes up for any iTunes purchased movies or Netflix content.
I tried all the advice:
resetting the ATV2
Restoring
Powering everything down, and back on
eliminating any HDMI switch between ATV2 and TV
Nothing worked. I still can't watch any protected content.
Any ideas?
Thanks,
Per

HDCP error with LG TV...

Hello.
I purchased a new Apple TV for my parents. I first set it up and tested it on my home TV (at 42" LG LCD TV) and all worked fine. So, I gave it to my parents and set it up on their home TV (a 32" LG LCD TV). As soon as they try and play rented content from iTunes store or Netflix, they get an error that says "This content requires HDCP for playback" and the video won't play. So, I brought the Apple TV back home, updated the software on the ATV and tried it again on my TV — again, no issues playing content. So, I brought it back to my parents, thus time with the same HDMI cable I was using at home, but again, I get the HDCP error and the video won't play. Tried three different HDMI cables and many of the suggestions found online to get things working, but nothing. For the records, the TV that won't work is an LG 32" LCD TV, model number 32LH30-UA. Anyone else have this model and having these issues?
Right now, my only solution is to give them my old Apple TV (gen1) in exchange for the new Apple TV (gen2) since the older Apple TV had component connections, so they can at least use that get around the HDCP bug for iTunes rentals (though, they'll be out of luck for Netflix since Apple abandoned older Apple TV users on that one).
Honestly, this is very frustrating. Once again, all these copyright protection "schemes" end up screwing the legit customer. If this doesn't get sorted out, then it's time to provide alternate, copyright protection-free content to my (and their) Apple TVs via the torrent of options available out there...
k.

I searched on LG's website for how to update the firmware on an LG TV. It says you need a "wired connection" (meaning via an ethernet cable) to an Internet modem or router, but my model (the 37LH30-UA) doesn't have an ethernet port. I have emailed LG about the issue, but my conclusion so far is that this TV is just not compatible with Apple TV. We'll see what LG has to say for themselves.
If your parents' TV has an ethernet port, try updating the firmware and see if that works.

[SOLVED] errors with fdisk and cryptsetup; is my drive going bad?

I'm having issues with re-formatting an external hard drive using dm-crypt. It was previously formatted with TrueCrypt/NTFS, which I used as a shared backup drive between Windows and Arch. At some point, it stopped being able to mount, which I attributed to allowing Windows to "fix" it after improper dismount (e.g. a hard kill).
I decided to re-format with ext4 and only use it from Arch, but now I'm wondering if I may have a hardware issue with the drive. I've tried a lot more (like going through the full zero write after mounting the drive as a temporary dm-crypt device), but here's the condensed version to illustrate the problem.
system info
This is on a fresh boot. Just adding that as I've had issues with kernel modules after updating if a new kernel comes through. A fresh boot removes that potential issue.
$ uname -a
Linux arch_840 4.0.3-1-ARCH #1 SMP PREEMPT Wed May 13 15:38:47 CEST 2015 x86_64 GNU/Linux
$ lsmod | grep dm_
dm_crypt 28672 2
dm_mod 98304 5 dm_crypt
$ lsmod |grep xts
xts 16384 2 serpent_sse2_x86_64,twofish_x86_64_3way
gf128mul 16384 2 lrw,xts
smartctl status
Figured I should check the drive. There's a lot of old age and pre-fail warnings, but this post would seem to suggest I'm okay?
# smartctl -A /dev/sdb
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.3-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 090 089 025 Pre-fail Always - 3330
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 703
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3707
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 104
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 734
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 17
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 053 000 Old_age Always - 24 (Min/Max 16/47)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 104
225 Load_Cycle_Count 0x0032 079 079 000 Old_age Always - 214068
Disk info, delete existing partition, new MBR, create new partition
# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.26.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x76d37b6d
Device Boot Start End Sectors Size Id Type
/dev/sdb1 63 976768064 976768002 465.8G 83 Linux
Command (m for help): d
Selected partition 1
Partition 1 has been deleted.
Command (m for help): o
Created a new DOS disklabel with disk identifier 0x2cd60f13.
Command (m for help): n
Partition type
p primary (0 primary, 0 extended, 4 free)
e extended (container for logical partitions)
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-976773167, default 2048):
Last sector, +sectors or +size{K,M,G,T,P} (2048-976773167, default 976773167):
Created a new partition 1 of type 'Linux' and of size 465.8 GiB.
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
trying to format with cryptsetup
I had a bunch of custom options, but other Arch posts suggested just trying the default, which is what I've done here. It fails with the same error as when I try to pass a cipher, key size, etc. ("Command failed with code 5: IO error while encrypting keyslot.").
# truecrypt -v --debug luksFormat /dev/sdb1
bash: truecrypt: command not found
[root@arch_840 jwhendy]# cryptsetup -v --debug luksFormat /dev/sdb1
# cryptsetup 1.6.6 processing "cryptsetup -v --debug luksFormat /dev/sdb1"
# Running command luksFormat.
# Locking memory.
# Installing SIGINT/SIGTERM handler.
# Unblocking interruption on signal.
WARNING!
========
This will overwrite data on /dev/sdb1 irrevocably.
Are you sure? (Type uppercase yes): YES
# Allocating crypt device /dev/sdb1 context.
# Trying to open and read device /dev/sdb1.
# Initialising device-mapper backend library.
# Timeout set to 0 miliseconds.
# Iteration time set to 1000 miliseconds.
# Interactive passphrase entry requested.
Enter passphrase:
Verify passphrase:
# Formatting device /dev/sdb1 as type LUKS1.
# Crypto backend (gcrypt 1.6.3) initialized.
# Detected kernel Linux 4.0.3-1-ARCH x86_64.
# Topology: IO (512/0), offset = 0; Required alignment is 1048576 bytes.
# Checking if cipher aes-xts-plain64 is usable.
# Using userspace crypto wrapper to access keyslot area.
# Generating LUKS header version 1 using hash sha1, aes, xts-plain64, MK 32 bytes
# KDF pbkdf2, hash sha1: 996745 iterations per second.
# Data offset 4096, UUID 181fed4d-42f2-4f0f-8b70-cb7ba459e25f, digest iterations 121625
# Updating LUKS header of size 1024 on device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Reading LUKS header of size 1024 from device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Adding new keyslot -1 using volume key.
# Calculating data for key slot 0
# KDF pbkdf2, hash sha1: 1008246 iterations per second.
# Key slot 0 use 492307 password iterations.
# Using hash sha1 for AF in key slot 0, 4000 stripes
# Updating key slot 0 [0x1000] area.
# Using userspace crypto wrapper to access keyslot area.
IO error while encrypting keyslot.
# Releasing crypt device /dev/sdb1 context.
# Releasing device-mapper backend.
# Unlocking memory.
Command failed with code 5: IO error while encrypting keyslot.
Things also tend to hang with respect to the drive at this point. For example, fdisk -l spits out /dev/sda partitions immediately and then just hangs instead of printing out /dev/sdb info, then eventually quits (without ever writing it).
Any suggestions on where to look/how to troubleshoot? I found some possibly related posts, but nothing that looks promising:
- Impossible to crypt the drive using cryptsetup (fixed by rebooting)
- cryptsetup fails to open Udev cookie 0xd4d94f5 (semid 0) waiting for z (no responses; the hang after seems similar)
There's a couple odds and ends references to cryptsetup 1.6.6 having issues. I downloaded 1.6.4-1 and 1.6.5-1 and -2 from ARM to try, but wanted to post this in the meantime in case something stuck out.
Last edited by jwhendy (2015-05-29 16:01:40)

@qinohe I thought of that and the other day started formatting with mkfs.ext4; unfortunately, it was at work and I had to leave before I could let it finish. It had been chugging along a good few hours, and I was surprised it would take that long. I was able to format it with ext4 using Windows 7 (I dual boot) with the MiniTool Partition Wizard but I didn't use it like that before trying to solve the cryptsetup issue again.
This last time around, I was getting unresponsive behavior. I think I need to reboot each time I try something with cryptsetup, as any commands related to that drive seem to hang afterwards (fdisk, umount, eject, mkfs, or trying crypsetup again). Perhaps I'll just let it cook overnight with mkfs and see if I can at least have an unencrypted, but functional drive.
One interesting tidbit is that even though cryptsetup fails, when I've tried to issue mkfs afterward, it asks me to confirm that I want to format the disk since it has a LUKS header... so something appears to have been written. Is it possible the header is causing some issues? I don't know much about the structure of a disk (like what range the MBR resides in, what constitutes a header, etc.) but have been wondering if there's some way to start really, really clean with the disk. Like I'd just bought it -- something appears to be lingering around from previous efforts?
@frostschutz I'll check tomorrow. That's a good question. Just checked journalctl and here are some of the errors that appear; unfortunately, I wasn't watching so I can't tell you what matches up with what command:
May 23 09:32:22 arch_840 systemd-udevd[7784]: inotify_add_watch(7, /dev/sdb1, 10) failed: No such file or directory
May 23 09:32:22 arch_840 kernel: usb 3-4: stat urb: status -108
### there's lots like this; like 10 in a row with various sector values listed
May 23 09:32:19 arch_840 kernel: Buffer I/O error on dev sdb1, logical block 61341696, lost async page write
May 23 09:32:19 arch_840 kernel: blk_update_request: I/O error, dev sdb, sector 490735616
### there's also a bunch like this, from tab #0 -> #29 (not colored red, so not sure they're errors?)
May 23 09:32:19 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 CDB: opcode=0x2a 2a 00 1d 07 bc 10 00 04 00 00
May 23 09:32:18 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
I paged down quite a ways and those seem like the unique messages when I search the journal for "sdb". Anything stand out? I will say that the same sector numbers appeared in multiple blocks of the third error type listed, so that makes me wonder if something is genuinely wrong with the disk. I'll post the output of the full smartctl scan when I hopefully run it tomorrow.
Thanks for chiming in!

[Partially Solved] Error with bsdtar and symbolic links

I'm trying to install a package (asymptote) from AUR but am running into an odd error. During the extract phase I get errors like
asymptote-1.70/base/asy-keywords.el: Can't update time for asymptote-1.70/base/asy-keywords.el: Function not implemented
bsdtar: Error exit delayed from previous errors.
I found a post that may help: http://bbs.archlinux.org/viewtopic.php?id=50750. Do I really have to do this?
By the way, I too am running on a Linode (Xen virtualization).
Thanks,
Luis
Last edited by banbh (2009-05-24 00:22:13)

I have not got to the bottom of my problems with bsdtar and symlinks. I suspect it must have something to do with either my configuration (derived from the Arch image provided by Linode) or running under virtualisation.
However, others might find my work-around useful, so I document it below.
I downloaded asymptote from AUR using wget ("wget http://aur.archlinux.org/packages/asymptote/asymptote.tar.gz"), unpacked it, then patched the PKGBUILD
$ diff -u PKGBUILD.orig PKGBUILD
--- PKGBUILD.orig 2009-05-23 17:58:47.000000000 -0400
+++ PKGBUILD 2009-05-23 18:00:49.000000000 -0400
@@ -11,9 +11,12 @@
'used if present at compile time: freeglut, gsl, fftw')
source=(http://downloads.sourceforge.net/sourceforge/asymptote/$pkgname-$pkgver.src.tgz)
md5sums=('1ded335bc63b662a6eb920a4c065706c')
+noextract=($pkgname-$pkgver.src.tgz)
build() {
- cd $srcdir/$pkgname-$pkgver
+ cd $srcdir
+ tar xzf $pkgname-$pkgver.src.tgz
+ cd $pkgname-$pkgver
./configure --enable-gc=/usr --prefix=/usr \
--with-latex=/usr/share/texmf/tex/latex || return 1
make asy || return 1
After that I simply did a "makepkg" followed by "sudo pacman -U asymptote-1.73-1-i686.pkg.tar.gz"

Error with calculations and printing output

Been a few months since I did any kind of java programming and cannot seem to figure out what is wrong with my program. It gives me an error with rentalCost when it goes to printout the value, does not seem calculate the values, and does not print any of the things I call for at the end. Maybe I need a seperate class or the if/else statements are wrong. The point of the program is for fun, but is to calculate the cost for a cabin based on certain coniditions the user inputs. Any help would be much appreciated. NOTE: There are no comments yet due to I put them in after I finish the program.
import java.util.Scanner;
public class Test
     public static void main (String [] args)
          String season, cabinGrade;
          double rentalCost, days, finalCost;
          Scanner input = new Scanner(System.in);
          System.out.print("What season will you be staying during? ");
          season = input.nextLine();
          System.out.print("What kind of cabin? ");
          cabinGrade = input.nextLine();
          System.out.print("How many days are you staying? ");
          days = input.nextDouble();
          input.close();
          if (season == "pre-season" && cabinGrade == "regular" && (days < 7))
               rentalCost = ((days * 55) * .9) * 1.0925;
          else if(season == "pre-season" && cabinGrade == "regular" && (days >= 7))
               { days = days - 7;
                 rentalCost = ((300 + (days * 55)) * .9) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "regular" && (days < 7))
               rentalCost = ((days * 55) * .75) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "regular" && (days >= 7))
               { days = days - 7;
                 rentalCost = ((300 + (days * 55)) * .75) * 1.0925;
          else if(season == "pre-season" && cabinGrade == "luxury" && (days < 7))
               rentalCost = ((days * 100) * .85) * 1.0925;
          else if(season == "pre-season" && cabinGrade == "luxury" && (days >= 7))
               { days = days -7;
                 rentalCost = ((600 + (days * 100)) * .85) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "luxury" && (days < 7))
                    rentalCost = ((days * 100) * .75) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "luxury" && (days >= 7))
               { days = days -7;
                 rentalCost = ((600 + (days * 100)) * .75) * 1.0925;
          else if(season == "prime" && cabinGrade == "regular" && (days < 7))
               rentalCost = (days * 55) * 1.0925;
          else if(season == "prime" && cabinGrade == "regular" && (days >= 7))
               { days = days - 7;
                 rentalCost = (300 + (days * 55)) * 1.0925;
          else if(season == "prime" && cabinGrade == "luxury" && (days < 7))
               rentalCost = (days * 100) * 1.0925;
          else if(season == "prime" && cabinGrade == "luxury" && (days >= 7))
               { days = days - 7;
                 rentalCost = (600 + (days * 100)) * 1.0925;
          System.out.println("Season : " + season);
          System.out.println("Cabin grade: " + cabinGrade);
          System.out.println("No. of days: " + days);
          System.out.println("Rental cost: " + rentalCost);
}

Lgndryhr wrote:
Been a few months since I did any kind of java programming and cannot seem to figure out what is wrong with my program. Maybe I need a seperate class or the if/else statements are wrong. The point of the program is for fun, but is to calculate the cost for a cabin based on certain coniditions the user inputs. Any help would be much appreciated. NOTE: There are no comments yet due to I put them in after I finish the program.
At the very least you need to tell us what you expected this code to do and what it actually did...

High-bandwidth Digital Content Protection (HDCP) Errors in iTunes and Display Link Drivers

Since August 2014 after an upgrade to iTunes, my 2010 white unibody macbook has been unable to run ANY videos bought from the iTunes store citing HDCP issues with my INTERNAL screen. I tried external screens, TVs, resetting PRAM, ... etc to no avail. I found a mention of Displaylink drivers as a possible issue.
I use Display Link drivers to run my ASUS MB168B+ external USB screen (which I love). I uninstalled the drivers and voila! the videos work again. Sadly, my screen won't run any more...
I am posting this in hope that the iTunes team and the Display Link team partner up to fix this issue which seems to be affecting a number of Mac users around the world.

The problem is probably your internet connection not the Apple TV.
The first thing to check would be your internet download speed, you can do this at www.speedtest.net. If you do this using a computer connected by ethernet, you should get a fairly good indication of your incoming speed from the ISP. If you are using a device connected by wifi you will need to take account of the portion of your internal network being used and the effect it might have on the result you are seeing. Another option is to access your modem (see your manual to determine how to do this) through your web browser or specialist software supplied by your ISP, the software on the modem itself will often tell you your connection speeds somewhere.
1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

Audio error with garageband and external usb audio interface

I am using Garageband 2.0.3. under ios 8.0.2 on my iPad 3 and via camera adapter a USB audio interface Focusrite Scarlett 2i4 or a Presonus iTwo.
When I start Garageband, it works well, the audio interfaces are recognized and I can record a track.
As soon as I switch from instrumtent to track view, the audio path is completely disturbed and all I can hear is some noise from the speaker.
Then I have to unplug the usb cable and plug it in again. Then audio works until I switch back to the instrument menu.
When I use the headphone output only there is no problem with Garageband and everything works fine.
Other applications audio applications don't show any error with each of the two audio interfaces.
Any feedback is very much appreciated, thanks.
Harald

I have this exact issue. However, I tried the Loopy app after after GB crashed and received an error message saying that core audio is not available. Rebooting resolves but the problem repeats. Any suggestions as to fixes? Btw; I have no such problem with Ipad 2 and ios 7.

Constant & erratic "Page Load Error" with Safari and Firefox

A week or two ago, I started getting constant "Page Load Errors" ('this page cannot be found', etc) when browsing with either Safari or Firefox. These are not dead sites that time out, but are very live (and cannot be summoned no matter how many times refresh)!
Something is wrong on my computer's end: I have strong wireless, have tried connecting with ethernet, and have used a different network. All of these produce the same result, where about half of the sites I try to connect to are instantly declared as dead by any browser I use.
I am not using any firewall, and have emptied both browser's caches.
Any ideas would be greatly appreciated.
Thanks!
Cliff

I'm having the same problem. It only happens at home over my DSL connection. Here is what I have tried and the results.
This really started bothering me since I upgraded to a recent Macbook Pro. I tried my original MBP with Leopard and found it doing the same thing. I ended up testing from my G4 and it works fine. The problem occurs over wireless and wired. I tried changing my MTU size with no change. I thought it was DNS but changed to other DNS and it didn't make a difference. Happens in Safari and Firefox. I am thinking it has an effect on iTune store also. The problem goes away when I VPN in to work, comes back when I close the VPN.
Just tonight I installed an clean 10.5 Leopard on my original MBP. Safari works perfectly. Instead of updating to 10.5.6, I download the 10.5.5 update. After updating the problem reappeared.
Again, my G4 with latest Tiger update work fine and both Macbook Pros with the latest Leopard have a problem over my DLS connection. They work perfectly fine at work and other locations.
Ted

Weird error with division and float

I'm trying to write a program (which is due tomorrow) which draws an ellipse with horizontal and vertical radii input by the user. Now, for whatever reason, when I divide two numbers and put the answer in a double, it disregards the decimal (so when the answer is less than one, it gives me 0.0)
Why is it doing that and what can I do to fix it?

Heh. I actually figured that out before you posted,
but thanks for the response.Most had that figured out before you even made your original posting so don't be too cocky now -:)

HDCP Error with HDMI-VGA connections

We have been using Apple TV 3 Software Version 7.0.2(6915) for connecting the Apple TV to classroom projectors that have a VGA port in. This was working perfectly till last week, and it seems a new software update was pushed to the Apple TV device now we get "This Content Requires HDCP for playback". Tried multiple different options of soft and hard reboots, resets and restarts nothing helps. Connecting the same Apple TV using HDMI-HDMI cable works fine. We are using Kanex HDMI-VGA adapter. If someone has the same issue please write back since there have 26 Apple TVs in the school and is being actively used by instructors to project their work to the class.

ravijn wrote:
We have been using Apple TV 3 Software Version 7.0.2(6915) for connecting the Apple TV to classroom projectors that have a VGA port in. This was working perfectly till last week, and it seems a new software update was pushed to the Apple TV device now we get "This Content Requires HDCP for playback".
As far as I know, 7.0.2(6915) is the latest software version & nothing new has been pushed out by Apple since its release months ago.
You problem is most likely exactly what the error message indicates: the content (for example commercial movies from a streaming service or an iTunes library) you are trying play on the ATV is protected by the HDCP encryption standard, so unless the Kanex adaptor supports HDCP internally, the ATV will not output the protected content to it.
I looked on the Kanex website to see if they claim the ATV Pro adaptor supports HDCP but nothing there says if it does or doesn't. Also, one of the U.S. Apple Store questions about the device has conflicting answers for that, so I suggest you contact Kanex directly for a more definitive answer & perhaps some help with the issue.
Failing that, you could try your setup with some content you know is not protected by HDCP (like a home movie in an iTunes library). If that works, then the problem almost certainly is that the Kanex doesn't support HDCP & you will not be able to use it with any content so protected.

Random HDCP errors with Netflix

I've been getting random HDCP problems when streaming from Netflix, the error message "This content requires HDCP for playback". Have tried the various fixes discussed here (swapping out my HDMI cable, power-cycling the ATV 2). Some days it works, some days it doesn't, and it's getting very frustrating. I have a Sony Blu-ray player that also streams Netflix, and it works fine. I prefer the interface of the ATV 2, but I'm getting fed up with it working only inconsistently. Also...I was under the impression HDCP is some sort of DRM for downloaded movies, why would/should this even apply to streaming Netflix content??

Swapping HDMI cable was a sensible thing to try.
I would also test another HDMI input if you have one.
I can't get Netflix in UK but would assume Netflix may require HDCP to prevent copying of it's streams - the big companies want to prevent you from copying/recording shows/movies irrespective of how you watch them.
AC

HDCP Error with atv2 and Philips TV

Similar Messages

Maybe you are looking for