HDCP error with new HDCP compliant monitor

I just bought a new Asus VE228H monitor. I have a ATI Radeon HD 4200, HDCP compliant video card and I am running Windows 7 and iTunes 12.1.1.4. Even though the new monitor is HDCP compliant, I still get an HDCP error in iTunes. I replaced the cable with a new HDMI cable and I still get the error. I have tried searching online for a solution, but haven't found a solution. Thanks in advance for your help.

SUCCESS ....... for now ......!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i have now got my atv2 unit to power back on - and we can play the rented SD movie which is playing now to a happy family....
No HDCP error message appeared this time.
This what we did to fix our issues....
1) Pressed the HDMI cable more firmly into the HDMI port into TV - this allowed the ATV2 to actually show/reappear onto the tv panel.
2) Plugged both power leads for TV and ATV DIRECTLY into wall. (Previously, we had both AC leads plugged into a 4x multi power board and had this plugged into the wall.
We started the SD movie and no HDCP error appeared and movie is still playing as i type...
Now, to repeat this error/diagnostic, we then plugged the TV power lead back into the 4 x multi power board and plugged the board back into the wall. Immediately, the dreaded HDCP error re-appeared. We then replugged TV back into wall directly and no HDCP error message.
Hypothesis #1 :
Now, this 4 x multi power board also had our DVD player and stereo connected to it. Perhaps our DVD (potential recording device) was being detected and hence the HDCP barrier came up so that we were not able to record this movie.... just a hunch but sounds plausible.....
Hypothesis #2 :
Also, this 4 x multi power board was within immediate vacinity of the ATV2 unit. Possible interference.....
When the 'dust' settles and the family finishes watching the movies, (1 x HD , 1 x SD), i will plug the 4 x multi power board into another AC wall socket way out of the way of the ATV2 unit (around 4m) and try to repeat this error to validate my hypotheses - noted above.
I will report findings later in around 6 hours...
thanks for your help people...

Similar Messages

ITunes HDCP error on a FULLY COMPLIANT SYSTEM

OK, I've just about had enough of this DRM nonsense.
Everyone who pays has to run around for hours trying to find a way to play the stuff they paid for while those who don't pay just sit down and watch! Great way to do business. Great way to encourage people to actually pay for stuff! Well done!
When will the top studio heads realize it's just making us all LOSE more money than we gain!
My system is 100% HDCP compliant.
I can confirm in the Nvidia control panel that both my graphics card and display are compliant and currently running HDCP fine.
But all of a sudden, last night iTunes refuses to play any of my few iTunes movie downloads (of which thankfully there are few, Blu-ray is so much better and the protection is easy to get around so you can play them back properly as you wish, but for a few titles I grew tired of waiting for the studios to get around to releasing them in a proper HD format, Blu-ray, so I finally caved in and tried a few digital downloads and for the other case I got one as promo (along with the Blu-ray).)
I tried re-booting and re-installing iTunes a few times and once it played for about 10 seconds before quitting and putting up the fake HDCP error message.
I can play back Blu-ray stuff just fine even if I turn off AnyDVDHD. So between that and the control panel saying HDCP is running fine, it's obviously running fine.
So I don't know what extreme levels iTunes is suddenly decided to use to verify HDCP, since everything else runs HDCP protected content just fine.
It's pretty ridiculous how many other complains like this I see around too. Can this really be good for business??
And it's pretty ridiculous that iTunes won't even let me watch a movie that I am in. Heck, I even partly funded a movie for which I'm now getting blocked by iTunes, now how is that for the height of irony! RIDICULOUS! Apple get your act together! This isn't good for your bottom line or anyone connected to the industries bottom line nor to any of the millions of loyal paying customers.

I'm sorry, but I don't think that's the problem...
I have a Mac Pro with an Apple Cinema Display 23', and it worked fine, I could watch all movies, until I upgraded my video card for a new one. My MacPro came with an ATI video card, and I it stopped working. So I had to replace it for new one and I've choose a new nVidia gForce 285. Since then I can't watch any HD movie I downloaded from iTunes Store. In this case the problem is with the video card, that is not recognized as an HDCP device or something related. I'm trying to contact Apple to see what can be done with this problem and I suggest you guys to do the same. Some one must realize that some Apple computers will not have configurations 100% made by Apple.
Best Regards
-Bruno

HDCP error with iTunes 11.3.1 update

I recently cannot watch any HD content on my computer purchased through iTunes. Just started happening with the latest 11.3.1 update. I get the old HDCP content cannot be played message even though I have all apple gear, could play the content a few weeks ago with the last iTunes, monitor is more than capable of playing HD content, and the movies play for 10-15 seconds and then freeze and the error message pops up. Never an issue before. Apple Cinema display connected to a Mac Pro from 2012 running Mavericks and iTunes 11.3.1.
I have reset my SMC a few times and it does not help. Any ideas, or do I just find another way to get media. I will just buy DVD's and rip them to my mac if this is the new NORM. It will play fine on my TV through Apple TV, but not on my computer through iTunes.
Thanks in advance.

I have exactly the same Problem: Has always worked before, came "out of the blue" after latest updates, hardware is more than capable, have tried every maintenance option known to me.
In the meantime, I also tried 6 different configurations of OSX and iTunes via external boot disk together with my hardware, from OSX 10.8.5 to 10.10 (beta) and iTunes 11.1.4 to 12.0 (beta) and voilá: everywhere it WORKED! So the error seems to be software based and seems to occure while updating a system over time. A solution could be to clean install the Mac with a fresh system, but at the moment I don't have the time for that. Hopefully others will chime in into this discussion and Apple will get aware of the problem.
Will also try to get in touch with Apple-Tech-Support, but my Apple-Care-Warranty is over and I'm not willing to pay 50 bucks for that phone call. Also don't have a Genius-Bar around...
My workaround for now is, to use an external boot disk with a clean OSX 10.9.4, log in with Apple-ID and play the movies.

HDCP error with LG TV...

Hello.
I purchased a new Apple TV for my parents. I first set it up and tested it on my home TV (at 42" LG LCD TV) and all worked fine. So, I gave it to my parents and set it up on their home TV (a 32" LG LCD TV). As soon as they try and play rented content from iTunes store or Netflix, they get an error that says "This content requires HDCP for playback" and the video won't play. So, I brought the Apple TV back home, updated the software on the ATV and tried it again on my TV — again, no issues playing content. So, I brought it back to my parents, thus time with the same HDMI cable I was using at home, but again, I get the HDCP error and the video won't play. Tried three different HDMI cables and many of the suggestions found online to get things working, but nothing. For the records, the TV that won't work is an LG 32" LCD TV, model number 32LH30-UA. Anyone else have this model and having these issues?
Right now, my only solution is to give them my old Apple TV (gen1) in exchange for the new Apple TV (gen2) since the older Apple TV had component connections, so they can at least use that get around the HDCP bug for iTunes rentals (though, they'll be out of luck for Netflix since Apple abandoned older Apple TV users on that one).
Honestly, this is very frustrating. Once again, all these copyright protection "schemes" end up screwing the legit customer. If this doesn't get sorted out, then it's time to provide alternate, copyright protection-free content to my (and their) Apple TVs via the torrent of options available out there...
k.

I searched on LG's website for how to update the firmware on an LG TV. It says you need a "wired connection" (meaning via an ethernet cable) to an Internet modem or router, but my model (the 37LH30-UA) doesn't have an ethernet port. I have emailed LG about the issue, but my conclusion so far is that this TV is just not compatible with Apple TV. We'll see what LG has to say for themselves.
If your parents' TV has an ethernet port, try updating the firmware and see if that works.

HDCP error with Hulu and Netflix

I've had a Apple TV 2 for a few years now and it has worked great.. Two days ago it stopped playing Hulu and Netflix and Vimeo.. All worked fine up until then.. It continues to give me a HDCP error when I try to use them.. It will try to load the program then after 4secs I get the error.. I have changed nothing on my set up.. I have reset and restored, unplugged the HDMI cable and power cable as well.. No luck.. The only thing it will play is content I purchase or have purchased from Apple.. Is anyone else having this issues.. Any help would be appreciated!!

I would try testing with another tv to verify the problem is with the tv and not with the atv

B2 Error with new MSI GTX 970 :(

Hi there team!
Just registered to try and get help. I spent around 6 hours researching + trying all the suggestions throughout many different forums, but the B2 error still persists. I am currently running the following spec:
Mobo - MSI Z68A-G43 (G3), with version 4.30 ( I flashed bios last night and still no help)
CPU - Intel® Core™ i5-2500K Processor, 3.5GHz etc.etc.
RAM - Corsair Vengeance 2x4gb at 1333MHz
GPU - MSI GTX 970 GAMING Twin Frozr V 4GB GDDR5
PSU - Cooler Master Silent Pro 700W
I have tried:
-Taking out the card and using the on-board graphics to flash the bios to later version, No help. (during this process, the B2 error does NOT show up)
-Upgraded the card to latest nVidia drivers, even uninstalled and re-installed them. No help.
-Upgraded all the drivers from MSI, i.e. chipset etc. through Live Update 6. No help.
When the card is in, I cannot even access bios, it just gets stuck at B2 screen for like a minute, and then carries on with the boot process. I am able to play games etc. after the booting, but this error for sure should not be there when the PC boots up. I didn't have any issues with my old GTX 560 TI. I've read different forums saying that it might have something to do with the mobo thinking that something has to be connected to the on-board graphics; or that flashing BIOS helped a lot of users, but not me :(.
I don't have a second PC to test the card on.
Literally, I would try anything, please someone just help :(( This card is a beast and I wanna be able to properly use it and not having to worry about this error.
Thank you very much guys, hope someone can help!

Quote from: gabe_dimitrov on 08-February-15, 20:40:51
Man thank you so much! It is finally working!!! Thank you!!!! ))) It is showing correct version in BIOS, does not show B2 error whatsoever, all done! )
Thanks for your time! You can close thread, but it's very useful for anyone that has this issue!
Wich version of BIOS do you have installed? Can you OC your processor with new BIOS?

Still getting Javascript error with new version of UIX

I'm facing some problem after changing my UIX framework version (2.2.3030829.1626).
Currently I'm using UIX version (2.2.3030829.1626) . Paging with table is not working with new frame work .
It is giving me javacript error "object doesn't support property or method" when clicking 'Next' .
It's working fine with old version.
We had used proper cabo directory. These files are in sync with the version of the runtime
Here is our finding
I found a error in _updateFormActions() function from MarlinCoreb2.js file.
In this function it is giving error at
if(a8!=a6)
a7.action=a6 line (line # 1841,1842). If I comment out this two lines page is
working properly without any javascript error.
This problem is a bit tricky....
Because it seems to be a problem with the UIX framework that only occurs on some versions of the Internet Explorer. On some version (IE 6.0.2600.0000) it works fine
and it also works on the Mozilla Firefox browser.
Can any one advice on the same?
Thanks in advance
Anindya

I answered this question on a different thread.
Do NOT post the same question multiple times. If you require more complete or prompt assistance than you receive on these forums, contact Oracle Support.
-brian

Javascript error with new UIX framework

Hi,
I'm facing some problem after changing my UIX framework version (2.2.3030829.1626).
Currently I'm using UIX version (2.2.3030829.1626) . Paging with table is not working with new frame work .
It is giving me javacript error "object doesn't support property or method" when clicking 'Next' .
It's working fine with old version.
Any help is much appreciated.
Thanks and Regards,
Anindya

Thanks Brian for your prompt reply
We had used proper cabo directory. To confirm it we have done it once again.But we're still getting the same error.
here is our finding
I found a error in _updateFormActions() function from MarlinCoreb2.js file.
In this function it is giving error at
if(a8!=a6)
a7.action=a6 line (line # 1841,1842). If I comment out this two lines page is
working properly without any javascript error.
This problem is a bit tricky....
Because it seems to be a problem with the UIX framework that only occurs on some versions of the Internet Explorer. On some version (IE 6.0.2600.0000) it works fine
and it also works on the Mozilla Firefox browser.
can you please advice is there any solution
Thanks in advance
Anindya

HDCP Error with HDMI-VGA connections

We have been using Apple TV 3 Software Version 7.0.2(6915) for connecting the Apple TV to classroom projectors that have a VGA port in. This was working perfectly till last week, and it seems a new software update was pushed to the Apple TV device now we get "This Content Requires HDCP for playback". Tried multiple different options of soft and hard reboots, resets and restarts nothing helps. Connecting the same Apple TV using HDMI-HDMI cable works fine. We are using Kanex HDMI-VGA adapter. If someone has the same issue please write back since there have 26 Apple TVs in the school and is being actively used by instructors to project their work to the class.

ravijn wrote:
We have been using Apple TV 3 Software Version 7.0.2(6915) for connecting the Apple TV to classroom projectors that have a VGA port in. This was working perfectly till last week, and it seems a new software update was pushed to the Apple TV device now we get "This Content Requires HDCP for playback".
As far as I know, 7.0.2(6915) is the latest software version & nothing new has been pushed out by Apple since its release months ago.
You problem is most likely exactly what the error message indicates: the content (for example commercial movies from a streaming service or an iTunes library) you are trying play on the ATV is protected by the HDCP encryption standard, so unless the Kanex adaptor supports HDCP internally, the ATV will not output the protected content to it.
I looked on the Kanex website to see if they claim the ATV Pro adaptor supports HDCP but nothing there says if it does or doesn't. Also, one of the U.S. Apple Store questions about the device has conflicting answers for that, so I suggest you contact Kanex directly for a more definitive answer & perhaps some help with the issue.
Failing that, you could try your setup with some content you know is not protected by HDCP (like a home movie in an iTunes library). If that works, then the problem almost certainly is that the Kanex doesn't support HDCP & you will not be able to use it with any content so protected.

HDCP Error with atv2 and Philips TV

I have a atv2 and a Philips TV, everything is working fine, but not iTunes. I bougt 2 films on iTunes (rented) and after a few seconds (1-5 seconds) the films stops and after a while it´s displayed, that my connection does not support hdcp. But that can´t be, becaus I use a blu-ray player on that TV too. I tried with different hdmi cables, I even bought a very expensive and short one, but always the same error. I tried different hdmi inputs, even downloaded a new firmware on the Philps TV, restarted the atv but nothing worked. Now I payed for 2 films for I´m not able to see. Does any one can help me????

I would try testing with another tv to verify the problem is with the tv and not with the atv

Random HDCP errors with Netflix

I've been getting random HDCP problems when streaming from Netflix, the error message "This content requires HDCP for playback". Have tried the various fixes discussed here (swapping out my HDMI cable, power-cycling the ATV 2). Some days it works, some days it doesn't, and it's getting very frustrating. I have a Sony Blu-ray player that also streams Netflix, and it works fine. I prefer the interface of the ATV 2, but I'm getting fed up with it working only inconsistently. Also...I was under the impression HDCP is some sort of DRM for downloaded movies, why would/should this even apply to streaming Netflix content??

Swapping HDMI cable was a sensible thing to try.
I would also test another HDMI input if you have one.
I can't get Netflix in UK but would assume Netflix may require HDCP to prevent copying of it's streams - the big companies want to prevent you from copying/recording shows/movies irrespective of how you watch them.
AC

Upgrade to Yosemite, iPhoto won't open and NTFS-3G could not mount error with new external HD

Help!
I just did a software update to get OS X Yosemite 10.10.2 on my MacBook Pro.
Now iPhoto won't open and I get this error:
"Your photo library is either in use by another application or has become unreadable....Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup."
So I do this and try to repair the database as suggested and I get another error:
"iPhoto will open as soon as the iPhoto library is available. Time Machine might be backing it up."
But it's not - no external hard drive is connected.
I'm terrified I can't get access to my photos (and I admit I haven't backed up with Time Machine for over a year - my mistake that I won't make again).
So I bought a brand new external hard drive (seagate for mac and pc, 2TB) so I could save only my photos to the hard drive (because I googled and read you can manually save your photos to disk by dragging and dropping the photo library onto the external hard drive).
But I can't even get the hard drive to work....I get this error
"NTFS-3G could not mount /dev/disk2s1
at /Volumes/Seagate Backup Plus Drive because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)"
I google the issue again and it says to uninstall NTFS-3G but I actually think I just deleted it a long ago without uninstalling it properly?? I don't know....
(a) how do i fix iphoto
(b) how do i get external hard drives to work with this OS (I've read lots of posts and don't really understand the advice)
(c) how do i get all my photos onto the hard drive safely so I can import them onto a PC
Any assistance would be magic for this little lady!

(c) how do i get all my photos onto the hard drive safely so I can import them onto a PC
First see if you can reformat the EHD to MS-DOS FAT with Disk Utility. If you can
open iPhoto and select all of the Events in the Events mode. Use the File ➙ Export ➙ File Export menu option and export to the EHD with these settings:
Select the destination for the export to be the EHD or a folder on the EHD. This process will create a folder for each Event in your library with the same name as the Event and contain the original image files. The EHD will be useable by a PC and the photos will be available also.

Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment

I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine. I have only built the machine, and tried to load the Drivers.
I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD. I identified that the Bluetooth driver was the issue. I then did not load the Bluetooth
drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os. (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
I have not received a single Update either. The Auto update feature claims that I am up to date. I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain. Also the results of the sfc /scannow are copied below.
My Questions
I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom. Will you take a look??
Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
drivers work. (including the blue tooth)
The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
Errors and Results.
There are also a number of logs that show various Crit, Error, and Warning logs. I will include those if need be.
This is the majority of the error messages, and I have missed the opportunity to capture others.
Internet explorer encountered Validation errors:
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : comctl32.dl
iii.
Assert offset: 00133A2A
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 008BE823
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0040F9E8
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : iertutil.dll
iii.
Assert offset: 001DEC51
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 00014159
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Microsoft Management Console Encountered a Validation Error
Validation Error
i.
Process Name: mmc.exe
ii.
Module Name : ieframe.dll
iii.
Assert offset: 00000000006C9283
Scripted Diagnostics Native Hot encountered a Validation Error
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : urlmon.dll
iii.
Assert offset: 00000000001A0A73
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017f32
Windows System Assessment Tool encountered a validation error
Validation Error
i.
Process Name: winsat.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017F32
Windows Explorer Encountered a validation Error
Validation Error
i.
Process Name: Explored.exe
ii.
Module Name : thumbcache.dll
iii.
Assert offset: 00000000000300BE
AI Suite 2 encountered a validation error
Validation Error
i.
Process Name: AI Suite 2.exe
ii.
Module Name : ntdll.dll
iii.
Assert offset: 000686BD
the number “2” is the substitutedfor the roman numeral 2
I believe that this is part of the MB Suite.
My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download. Activated on 8-12-2012
Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
Chip Set: bx80619i73930k
2x Memory: cmx16gx3m2a1600c11 Corsair
Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
Generic optic drive: SH-222bb/bebe Samsung
Here is the Microsoft Fix It error code
Assertion Failed!
Program:…
File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
Line: 2131
Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
(Press Retry to debug the application – JIT must be enabled)
                Abort    Retry     Ignore
Abort
Closes the program
Retry
Repeats the error
Verbatim
Ignore
Closes the program
Nothing happens
Here is the Microsoft Genuine Advantage Diagnostic Report
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-*****-*****-8C7YB
Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
Windows Product ID: 55041-146-2397786-86942
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_rtm.101119-1850
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
Installation ID: 000792957432055771547065313840421702569731971164600080
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: 8C7YB
License Status: Licensed
Remaining Windows rearm count: 5
Trusted time: 8/12/2012 5:47:25 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information:
ACPI Table Name           OEMID Value     OEMTableID Value
APIC                                    ALASKA
A M I
FACP                                   ALASKA
A M I
HPET                                    ALASKA
A M I
MCFG                                 ALASKA
OEMMCFG.
SSDT                                    AMICPU
PROC
Scan Now Results
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
C:\Windows\system32>

Thank you for your valuable time.
I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
The Memory Tool did not find anything amiss.
As per another thread I am going to try flashing the bios as well with the updates.
Following are the Chkdsk results.
Are there any other suggestions?
Chkdsk Results
Checking file system on C:
The type of the file system is NTFS.
A disk check has been scheduled.
Windows will now check the disk.
CHKDSK is verifying files (stage 1 of 5)...
89600 file records processed.
          File verification completed.
221 large file records processed.
0 bad file records processed.
1596 EA records processed.
44 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 5)...
131874 index entries processed.
Index verification completed.
0 unindexed files scanned.                                           0
unindexed files recovered.                                       CHKDSK
is verifying security descriptors (stage 3 of 5)...
89600 file SDs/SIDs processed.
Cleaning up 36 unused index entries from index $SII of file 0x9.
Cleaning up 36 unused index entries from index $SDH of file 0x9.
Cleaning up 36 unused security descriptors.
Security descriptor verification completed.
21138 data files processed.
CHKDSK is verifying Usn Journal...
36120296 USN bytes processed.
Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
89584 files processed.
File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
476262075 free clusters processed.
Free space verification is complete.
Windows has checked the file system and found no problems.
1953410047 KB total disk space.
48065140 KB in 61610 files.
     43468 KB in 21139 indexes.
         0 KB in bad sectors.
    253139 KB in use by the system.
     65536 KB occupied by the log file.
1905048300 KB available on disk.
      4096 bytes in each allocation unit.
488352511 total allocation units on disk.
476262075 allocation units available on disk.
Internal Info:
00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00 .^...B..........
e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00 ....,...........
6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00 m.u.i...........
Windows has finished checking your disk.
Please wait while your computer restarts.

Multiple Errors with New iTunes

Hi Folks,
What's up with the most recent version of iTunes.
1. I'm trying to burn a CD (playlist) and iTunes is trying to analyze or "Determining the Audio Volume" for my podcasts. It also says 225 and I don't have that many.
2. Print a cover for my CD. It freezes when I want to change the print features. Will not print, can't close window, etc. I have to re-start my system.
3. My previous posting is for a missing iTunes Help -- nothing there.
4. If I'm burning a disc with iTunes I can't open an IE or Firefox Browser. It complete jams my computer.
What's up with this recent version.
Do I need to complete uninstall again. May be I should just go back to an older version since the newer versions have too many bugs or problems.
Thanks, katy

I should add that as of this morning iTunes appears to opening fine and reading my iPod (which is inexplicable because I haven't done anything with it since my 1st post.) iTunes still, however, will not save my library. I keep getting error message {-1450}. Also, every time i open iTunes, I am asked to agree to the user agreement, as if i had just downloaded the program.

SQL Server 2012 Management Studio Displays Error With "New Query" and Intellisense Works Intermittenly

I was upgrade to SQL Server 2012 and Visual Studio 2010 was upgraded with SP1 the same day.  This is x64 machine.
Microsoft SQL Server Management Studio      11.0.2100.60
Microsoft .NET Framework      4.0.30319.261
Operating System      6.1.7601
Problem 1) With SQL Server Management Studio, selecting "New Query" a warning box is displayed: "The 'Microsoft.Practices.EnterpriseLibrary.Configuration.Design.VisualStudioIntegration2010Package, Microsoft.Practices.EnterpriseLibrary.Configuration.Design.VisualStudioIntegration2010,
Version=1.0.0.0, Culture=netutral, PublicKeyToken=null' package did not load correctly.    The problem mayhave been cuased by a configuration change or by the installation of another extension. You can get more information by running the
application together with the /log parameter on the command line, and then examining the file ...\AppDate\Roaming\Microsoft\AppEnv\10.0\ActivityLog.xml'. Continue to show this error message?
Problem 2) In a Query Initellisense works intermittently but most of the time it will not display anything. I have tried Edit|Intellisense|Refresh Cach size and also seperately, Edit | Intellisense | List Members but neither has helped. Also
tried different selections for Tools|options| T-SQL | Intellisense| Maximum Script Size; no luck either.

Hi WallyJim,
For your first problem, possible workaround:
In Programs and Features (or Add/Remove Programs), right click the Microsoft Enterprise Library 5.0 Optional Update 1 program and select change. Remove the VisualStudio2010 integration.
Then, install the EnterpriseLibrary Configuration extension from Microsoft via the Extension Manager in VS2010. This will allow you to launch the configuration editor from VS2010, but will not be installed for SSMS.
For more information, please refer to
https://connect.microsoft.com/SQLServer/feedback/details/620532/error-message-on-new-query-window-opening.
For your second problem, the following conditions might affect the behavior of IntelliSense:
There is a code error above the cursor.
The insertion point is inside a code comment.
The insertion point is inside a string literal.
The automatic options are turned off.
For more information, refer to Troubleshooting IntelliSense (SQL Server Management Studio):
http://msdn.microsoft.com/en-us/library/ms173434.aspx.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

HDCP error with new HDCP compliant monitor

Similar Messages

Maybe you are looking for